Effects of non-chemical soil fumigant treatments on root colonisation with arbuscular mycorrhizal fungi and strawberry fruit production

The effects of biofumigation and soil heating on arbuscular mycorrhizal fungi (AMF) colonisation, strawberry growth and strawberry yield in pot experiments compared with untreated soil and chemical fumigation with dazomet were tested. Three different Brassicaceae species (Brassica juncea, Eruca sativa, Sinapis alba) were used as biofumigant plant green manure and soil heating was applied to simulate soil solarisation. Half of the plants were inoculated with indigenous arbuscular mycorrhizal fungi inoculum. With one exception (E. sativa) among the uninoculated plants, the treatments significantly decreased the mycorrhizal colonisation parameters compared with the untreated control. Dazomet displayed the greatest inhibitory effects on AMF establishment. In addition, the intensity and number of bands corresponding to Glomus spp. obtained with temporal temperature-gradient gel electrophoresis were lower for strawberry plants from biofumigant treatments than from the control. For the inoculated plants, there were almost no significant differences among the mycorrhizal colonisation parameters. The mass of leaves for the uninoculated and inoculated plants was higher for almost all non-chemical soil fumigant treatments compared with the control, except for heating of the uninoculated treatments. The number of strawberry fruits for the uninoculated biofumigant treatments was the highest, being higher than the values observed for the heating treatments, the chemical disinfection treatments and the control. There were no significant differences among the inoculated treatments. Biofumigation with Brassicaceae species resulted in higher soil organic matter and mineral nutrients and had a relatively small effect on AMF colonisation (F% = 59.0, 80.3, 47.3 for Bj, Es and Sa, respectively) compared with uninoculated controls (F% = 84.3). Despite the reduced AMF colonisation, biofumigation resulted in a higher fruit number and mass of leaves. Therefore, it represents a non-chemical soil fumigation method that should be applied in sustainable strawberry production.     

Effects of the invasive tomato red spider mite (Acari: Tetranychidae) on growth and leaf yield of African nightshades

The tomato red spider mite, Tetranychus evansi Baker and Pritchard, is one of the most serious pests of solanaceous crops in Africa. Field experiments were conducted to investigate its effects on the growth and leaf yield of five African nightshade species viz. Solanum americanum, S. sarrachoides, S. scabrum, S. tarderemotum and S. villosum during the 2008 and 2009 growing seasons. Plants were infested with 2–4 day-old female spider mites which were allowed to multiply. The number of mite motiles increased throughout the growing season in unsprayed plots and this number varied significantly between the African nightshade species. Except for S. sarrachoides, leaf damage was high on the other four Solanum species irrespective of the spraying regime during both seasons. However, S. scabrum had a significantly greater leaf area ratio (ratio of leaf area to total plant weight) and specific leaf area (ratio of leaf area to total leaf dry weight) during both seasons. Overall yields were 1.5 times more in S. scabrum and S. sarrachoides compared to S. americanum, S. tarderemotum and S. villosum. Our results show that T. evansi infestation affects the leaf area ratio and specific leaf area of African nightshade species differentially which eventually determines the plant's overall leaf yield. These findings present an opportunity for evaluation and selection of African nightshade species that can withstand spider mite infestation in small holder farms for increased vegetable production in Africa.     

Influence of air-assistance on spray application for tomato plants in greenhouses

Protected horticulture production represents one of the most important agricultural businesses in Southern Europe. However, many problems related to the lack of mechanisation, intensive use of pesticides, and, in some cases, undesirable residues on food, have not been solved yet. In this context, application technology is a key factor for the improvement of the efficacy and efficiency of plant protection products. Spray guns and knapsack sprayers are the most common technologies that have been used for this purpose. However, several studies have demonstrated that, compared with spray guns, the use of vertical boom sprayers in greenhouses improves spray distribution and reduces labour costs and operator exposure. The main objective of this study was to evaluate the influence of air-assistance on spray application in conventional tomato greenhouses. For this purpose three different spray conceptions were evaluated: 1) a modified commercial handheld trolley sprayer with two air assistance concepts; 2) a self-propelled sprayer; and 3) an autonomous self-propelled sprayer with remote control. All the sprayers considered were evaluated in terms of absolute and normalised canopy deposition, uniformity of distribution, and losses to the ground. In addition, the vertical liquid and air velocity distributions of the sprayers were assessed and compared with the canopy profiles and spray depositions. Yellow tartrazine (E-102 yellow) was used as a tracer for deposition evaluation. The results indicated that increasing the air velocity does not increase the efficiency of a spray application. In general, the modified handheld trolley sprayer showed the best results in terms of deposition and uniformity of distribution, especially at the lowest air assistance rate. These results were confirmed with evaluation of the uniformity of the air and liquid distribution.     

Breeding for increased grain protein and micronutrient content in wheat: Ten years of the GPC-B1 gene

To provide food and nutrition security for a growing world population, continued improvements in the yield and nutritional quality of agricultural crops will be required. Wheat is an important source of calories, protein and micronutrients and is thus a priority to breed for improvements in these traits. The GRAIN PROTEIN CONTENT-B1 (GPC-B1) gene is a positive regulator of nutrient translocation which increases protein, iron and zinc concentration in the wheat grain. In the ten years since it was cloned, the impacts of GPC-B1 allelic variation on quality and yield traits have been extensively analyzed in diverse genetic backgrounds in field studies spanning forty environments and seven countries. In this review, we compile data from twenty-five studies to summarize the impact of GPC-B1 allelic variation on fifty different traits. Taken together, the results demonstrate that the functional copy of the GPC-B1 gene is associated with consistent positive effects on grain protein, Fe and Zn content with only marginally negative impacts on yield. We conclude that the GPC-B1 gene has the potential to increase nutritional and end use quality in a wide range of modern cultivars and environments and discuss the possibilities for its application in wheat breeding.     

A rapid extensigraph protocol for measuring dough viscoelasticity and mixing requirement

The extensigraph is particularly useful in characterizing dough viscoelastic properties; however, testing throughput for standard method is low due to the prerequisite for farinograph water absorption, long dough resting and milling to prepare large amounts of flour. Therefore, a rapid extensigraph method was developed that reduced sample size (165 g wheat) for milling and more than tripled throughput. Wheat is milled in Quadrumat Junior mill with a modified sieving system. The resulting flour (100 g) was mixed with a pin mixer at constant water absorption to allow the evaluation of wheat genotypes at the absorption level they are expected to perform. Dough was subsequently stretched by an extensigraph after 15 min of floor time and 30 min resting. Strong correlations for extensigram R_max (r > 0.93), extensibility (r > 0.64) and area (r > 0.88) were found for the proposed method compared to the standard method. Mixing parameters (time and energy) obtained during dough preparation provided further information about dough strength and mixing requirement. By significantly reducing sample size requirement and increasing testing throughput, this rapid extensigraph method can be widely adopted in milling and baking industry and meets the need for a fast evaluation of dough strength in breeding trials.     

Hull to caryopsis adhesion and grain skinning in malting barley: Identification of key growth stages in the adhesion process

Strong adhesion between the hull and the caryopsis is essential for barley to be of good malting quality. Poor hull adhesion, a condition known as grain skinning, is undesirable for malting and downstream processes. At present, the processes mediating hull adhesion during grain development are poorly understood. The barley cultivar Chariot was grown in greenhouse conditions and grain development was recorded at defined growth stages to examine the timing of hull adhesion. Initiation of adhesion was first observed when caryopsis fresh weight and volume were approaching their maximum at 19 days after anthesis, during early dough. Hull adhesion was complete by 27 days after anthesis, or soft dough. Sections of developing grains were observed using light and transmission electron microscopy to examine a lipid-rich cementing layer believed to be responsible for adhesion between the hull and the pericarp. Evidence for a lipid-rich cementing material was supported by the observation that neither pectinase nor cellulase effected hull loosening. Grain growth, the presence of globular material originating from the pericarp and an electron dense material in the cementing layer are discussed in relation to hull adhesion. Grain skinning could be caused by poor adherence of cuticular material or inadequate fusion between cuticles.     

Combined mutations in five wheat STARCH BRANCHING ENZYME II genes improve resistant starch but affect grain yield and bread-making quality

Increases in the proportion of amylose in the starch of wheat grains result in higher levels of resistant starch, a fermentable dietary fiber associated with human health benefits. The objective of this study was to assess the effect of combined mutations in five STARCH BRANCHING ENZYME II (SBEII) genes on starch composition, grain yield and bread-making quality in two hexaploid wheat varieties. Significantly higher amylose (∼60%) and resistant starch content (10-fold) was detected in the SBEII mutants than in the wild-type controls. Mutant lines showed a significant decrease in total starch (6%), kernel weight (3%) and total grain yield (6%). Effects of the mutations in bread-making quality included increases in grain hardness, starch damage, water absorption and flour protein content; and reductions in flour extraction, farinograph development and stability times, starch viscosity, and loaf volume. Several traits showed significant interactions between genotypes, varieties, and environments, suggesting that some of the negative impacts of the combined SBEII mutations can be ameliorated by adequate selection of genetic background and growing location. The deployment of wheat varieties with increased resistant starch will likely require economic incentives to compensate growers and millers for the significant reductions detected in grain and flour yields.     

Characterisation of starch during germination and seedling development of a rice mutant with a high content of resistant starch

To acquire a better understanding of whether RS influences the dynamics of in vivo starch digestion and seed vigour, the high-RS rice mutant RS4 (RS ca. 10%) and the wild type R7954 were used to investigate total amylase activity, seedling vigour, starch content and starch granule structure during germination. RS4 exhibited similar seed vigour to R7954. Amylose and amylopectin in R7954 showed synchronous degradation throughout the whole process, while amylopectin was hydrolysed significantly faster than amylose in RS4 during the earlier germination stages. The starch residues of RS4 after germination (GD) lost endotherm peaks and showed a special X-ray diffraction pattern with only two peaks at around 16.90° and 21.62°, probably due to remnants of amylopectin and its tight crosslinking with the cell wall. The remaining starch after 10 GD, primarily amylopectin may make a critical contribution to total resistant starch content. These results indicated that RS had no negative impact on seed vigour in rice lines, although RS cannot be hydrolysed by α-amylase from human and animal in vitro. By appropriately increasing the special amylopectin fraction, a new breeding programme of high RS crops and improvement in the eating quality of high RS rice varieties might be achieved.     

Dough rheological properties and noodle-making performance of non-waxy and waxy whole-wheat flour blends

Dough rheological properties and noodle-making performance of non-waxy whole-wheat flour (WWF) with partial- or full-waxy (PW- or FW-) WWF substitution were studied. The substitution levels were 0, 250, 500, 750, and 1000 g/kg, respectively. FW-WWF reduced the peak viscosity and pasting temperature of WWF blends as its substitution level was increased due to its higher proportions of B-type starch granules and short amylopectin chains, while PW-WWF increased peak viscosity with the increasing substitution level because of its higher amylopectin content. As demonstrated by farinograph and rheometer measurements, FW-WWF interfered with gluten development because of the increased competition for water by arabinoxylans and amylopectin; however, PW-WWF enhanced dough strength due primarily to its increased protein content. Consequently, FW-WWF showed a detrimental effect on cooked noodle texture as the cooked noodle hardness was reduced by 50% at the 1000 g/kg substitution level. In contrast, PW-WWF enhanced noodle integrity and elasticity by increasing cooked noodle cohesiveness and resilience by 10.1% and 14.8%, respectively, at the 1000 g/kg substitution level. The results suggest that with waxy WWF substitution, the changes in starch composition, arabinoxylans, and protein content could modify the interactions among flour components and influence the quality characteristics of noodle products.     

Vitreosity,its stability and relationship to protein content in durum wheat

High quality requirements are set on durum wheat (Triticum durum) from semolina mills and pasta producers. For the production of semolina and pasta with good cooking quality, high grain protein content and vitreosity is required. The dependency of vitreosity on protein content as well as its stability under the influence of humidity was not well investigated up to now. We (1) compared two methods to determine vitreosity, (2) investigated the relationship between vitreosity and protein content, (3) developed a method to analyze vitreosity under humidity, and (4) examined the relationship between protein content and agronomical as well as quality traits in durum wheat. The results showed that the formation of vitreous kernels greatly depends on the protein content. To evaluate the stability of vitreosity under the influence of humidity a new method was elaborated and employed to assess the durum germplasm under study. This revealed that vitreosity of a durum wheat variety depends on the potential to form vitreous kernels but also to maintain this vitreosity under the influence of humidity. Our results further show that protein content is a central trait in durum wheat that strongly influences important traits like grain yield, vitreosity, and b-value.     

Effect of high molecular weight glutenins and rye translocations on soft wheat flour cookie quality

The influence of high molecular weight glutenin subunits (HMW-GS) on wheat breadmaking quality has been extensively studied but the effect of different Glu-1 alleles on cookie quality is still poorly understood. This study was conducted to analyze the effect of HMW-GS composition and wheat-rye translocations on physicochemical flour properties and cookie quality of soft wheat flours. Alleles encoded at Glu-A1, Glu-B1 and Glu-D1 locus had a significant effect over physicochemical flour properties and solvent retention capacity (SRC) profile. The null allele for Glu-A1 locus presented the highest cookie factor observed (CF = 7.10), whereas 1BL/1RS and 1AL/1RS rye translocations had a negative influence on CF. The three cultivars that showed the highest CF (19, 44 and 47) had the following combination: Glu-A1 = null, Glu-B1 = 7 + 8, Glu-D1 = 2 + 12 and no secalins. Two prediction equations were developed to estimate soft wheat CF: one using the HMW-GS composition and the other using physicochemical flour parameters, where SRCsuc, SRC carb, water-soluble pentosans, damaged starch and protein turned out to be better CF predictors. This data suggests that grain protein allelic composition and physicochemical flour properties can be useful tools in breeding programs to select soft wheat of good cookie making quality.     

Adapting wheat in Europe for climate change

Increasing cereal yield is needed to meet the projected increased demand for world food supply of about 70% by 2050. Sirius, a process-based model for wheat, was used to estimate yield potential for wheat ideotypes optimized for future climatic projections for ten wheat growing areas of Europe. It was predicted that the detrimental effect of drought stress on yield would be decreased due to enhanced tailoring of phenology to future weather patterns, and due to genetic improvements in the response of photosynthesis and green leaf duration to water shortage. Yield advances could be made through extending maturation and thereby improve resource capture and partitioning. However the model predicted an increase in frequency of heat stress at meiosis and anthesis. Controlled environment experiments quantify the effects of heat and drought at booting and flowering on grain numbers and potential grain size. A current adaptation of wheat to areas of Europe with hotter and drier summers is a quicker maturation which helps to escape from excessive stress, but results in lower yields. To increase yield potential and to respond to climate change, increased tolerance to heat and drought stress should remain priorities for the genetic improvement of wheat.     

Quinoa (Chenopodium quinoa Willd.) protein hydrolysates with in vitro dipeptidyl peptidase IV (DPP-IV) inhibitory and antioxidant properties

The potential of quinoa to act as a source of dipeptidyl peptidase IV (DPP-IV) inhibitory and antioxidant peptides was studied. A quinoa protein isolate (QPI) with a purity of 40.73 ± 0.90% was prepared. The QPI was hydrolysed at 50 °C for 3 h with two enzyme preparations: papain (P) and a microbial papain-like enzyme (PL) to yield quinoa protein hydrolysates (QPHs). The hydrolysates were evaluated for their DPP-IV inhibitory and oxygen radical absorbance capacity (ORAC) activities. Protein hydrolysis was observed in the QPI control, possibly due to the activity of quinoa endogenous proteinases. The QPI control had significantly higher DPP-IV half maximal inhibitory concentrations (IC₅₀) and lower ORAC values than QPH-P and QPH-PL (P < 0.05). Both QPH-P and QPH-PL had similar DPP-IV IC₅₀ and ORAC values. QPH-P had a DPP-IV IC₅₀ value of 0.88 ± 0.05 mg mL⁻¹ and an ORAC activity of 501.60 ± 77.34 μmol Trolox equivalent (T.E.) g⁻¹. To our understanding, this is the first study demonstrating the in vitro DPP-IV inhibitory properties of quinoa protein hydrolysates. QPHs may have potential as functional ingredients with serum glucose lowering properties.     

Influence of the cultivar,environment and management on the grain yield and bread-making quality in winter wheat

The genotype, environment and their interaction play an important role in the grain yielding and grain quality attributes. The main aim of this study was to determine the contributions of the genotype, environment and their interaction to the variation in bread-making traits. The data that were used for the analyses performed in this study were obtained from 3 locations in Poland from post-registration multi-environment trials with winter wheat in 2009 and 2010. The experimental factors were the cultivar (7 cultivars) and the crop management level (low input and high input). In the multi-environment trials, 17 traits were investigated that characterize grain, flour and dough quality. Most of the traits were affected much more strongly by environmental factors (i.e., year and location) than by genotype. The variance components revealed an especially strong effect of the year on the baking score, loaf volume and water absorption, as well a strong effect of the location on dough development and protein content. The obtained results demonstrate that the grain quality as measured by the parameters based on the protein content and quality may be substantially improved by crop management practices, especially by N fertilization level.     

Improved functional properties of pasta: Enrichment with amaranth seed flour and dried amaranth leaves

The present investigation evaluated the effects of dried amaranth leaves (DAL) and amaranth seed flour (AF) as ingredients for pasta production and their contribution to antioxidant activity. Cooking quality, proximal and aroma analysis, antioxidant capacity and sensory evaluations were performed. The results demonstrated that pastas with amaranth ingredients had decreased cooking time, increased cooking loss percentage, and decreased luminosity values compared with semolina control pasta. Pastas with both AF and DAL demonstrated the highest protein, crude fiber and ash contents. The addition of DAL resulted in higher contents of iron, zinc, magnesium and potassium compared with the control pasta. TC, FRAP and ORAC assays showed that the pastas exhibited an important reduction in antioxidant capacity by cooking process. Formulas with DAL showed the higher antioxidant capacity values after cooking. The addition of AF and DAL has proved to increase the functional benefits of the pasta.     

Molecular characterization of storage proteins for selected durum wheat varieties grown in different environments

The variations of the amounts of individual high molecular weight glutenin subunits (HMW-GS), of the ratios HMW-GSy to HMW-GSx and HMW-GS to low molecular weight glutenin subunits (LMW-GS) and of protein content were evaluated for eight durum wheat cultivars in two regions using four fertilizer combinations during two successive years. All measured parameters showed significant variation with genotypes (G), environments (E) and fertilizers (F). The interaction E × G × F was highly significant for glutenin amount variation. Amongst cultivars possessing HMW-GS 20, landraces seem to better value the N-fertilizer use for the accumulation of HMW-GSy than high yielding cultivars. Both HMW-GSy to HMW-GSx and HMW-GS to LMW-GS ratios were found to be positively correlated (p < 0.05) with total protein content.     

Whole wheat bread: Effect of bran fractions on dough and end-product quality

Consumption of whole-wheat based products is encouraged due to their important nutritional elements that benefit human health. However, the use of whole-wheat flour is limited because of the poor processing and end-product quality. Bran was postulated as the major problem in whole wheat breadmaking. In this study, four major bran components including lipids, extractable phenolics (EP), hydrolysable phenolics (HP), and fiber were evaluated for their specific functionality in flour, dough and bread baking. The experiment was done by reconstitution approach using the 2⁴ factorial experimental layout. Fiber was identified as a main component to have highly significant (P < 0.05) and negative influence on most breadmaking characteristics. Although HP had positive effect on farinograph stability, it was identified as another main factor that negatively impacted the oven spring and bread loaf volume. Bran oil and EP seemed to be detrimental to most breadmaking characteristics. Overall, statistical analysis indicates that influence of the four bran components are highly complex. The bran components demonstrate multi-way interactions in regards to their influence on dough and bread-making characteristics. Particularly, Fiber appeared to have a high degree of interaction with other bran components and notably influenced the functionality of those components in whole wheat bread-making.     

Immunomodulatory activities of non-prolamin proteins in wheat germ and gluten

Albumin (Alb), globulin (Glo), glutelin (Gll) and glutenin (Gln) were separately extracted from wheat germ and wheat gluten. Amino acisd composition, molecular weight distribution, solubility, in vitro digestibility, and immunomodulatory activities were all analyzed. Gll and Gln have similar molecular weight distributions, which differed from those of Alb and Glo. Alb showed the highest solubility at various pH values (except pH 4.0), whereas Glo showed the highest in vitro digestibility. Glo and Gll have the highest proportion of essential to total amino acids, while Alb and Gll have the highest protein digestibility-corrected amino acid scores. Gll had the strongest immunomodulatory effects in terms of stimulation of RAW 264.7 cells to produce IL-6, TNF-α, and IL-10, and good stimulatory effects on splenocyte proliferation, production of IL-2, phagocytosis, and secretion of nitric oxide in RAW 264.7 cells. Gll can be considered a good protein source for use in health foods.     

Genome-wide association mapping of starch granule size distribution in common wheat

Starch is a crucial component in wheat endosperm and plays an important role in processing quality. Endosperm of matured wheat grains contains two distinct starch granules (SG), referred to as larger A- and smaller B-granules. In the present study, 166 Chinese bread wheat cultivars planted in four environments were characterized for variation in SG size. A genome-wide association study (GWAS) using the 90 K SNP assay identified 23 loci for percentage volumes of A- and B-granules, and 25 loci for the ratio of A-/B-granules volumes, distributing on 15 chromosomes. Fifteen MTAs were associated with both the percentage volumes of A-, B-granules and the ratio of A-/B-granules volumes. MTAs IWB34623 and IWA3693 on chromosome 7A and IWB22624 and IWA4574 on chromosome 7B associated with the percentage volumes of A- and B-granules consistently identified in multiple environments were considered to be stable. Linear regression analysis showed a significantly negative correlation of the number of favorable alleles with the percentage volumes of A-granules and a significantly positive correlation between the number of favorable alleles and the percentage volumes of B-granules, respectively. The loci identified in this study and associated markers could provide basis for manipulating SG size to obtain superior noodle quality in wheat.