Determination of phosphate in solution at different ionic composition using malachite green

Abstract

The malachite green method was sometimes used to determine low concentrations of inorganic phosphate due to its high sensitivity. The aim of this work was to test the suitability of this method for the determination of phosphorus (P) extracted by various reagents, e.g., KCl 0.01–1.20M, CaCl₂ 0.01–0.1M, Na₂SO₄ 0.01–0.40M, NaHCO₃ 0.1M at pH 8.5, and NaOH 0.1M+NaCl 1M. The malachite green method was also compared with the traditional molybdenum blue method on 35 soil extracts. Color development reached stability within 2 hrs and was stable for up to 24 hrs for dilute solutions. For concentrated solutions the stability was inversely proportional to the concentration of the reagent. Salt concentration appeared to have no effect on absorbance in KCl extracts of up to 1.2M and in Na₂SO₄ extracts of up to 0.05M. Higher concentrations of sodium sulfate induced flocculation and precipitation of the dye complex, as did CaCl₂ above 0.04 M. A strong correlation was found between the malachite green and the molybdenum blue method. The malachite green method can be used for P determination in soil extracts when appropriate time of color development is provided and salt concentration is taken into account.     

A rapid and simple field test for phosphorus in Olsen and Bray No. 1 extracts of soil

Abstract

Farmers are increasingly aware of the need for correct fertilizer management, and have developed a keen interest in the rapid and accurate assessment of soil nutrient status. A simple field‐based soil test for phosphorus (P), adapted from commonly used laboratory tests would allow the farmer to assess quickly fertilizer requirements. We have adapted the malachite green method for the determination of P in water to a single‐solution technique for the determination of inorganic P in Olsen and Bray No. 1 extracts of soil. The method was modified for use in the field. The proposed method is at least four times as sensitive as the commonly‐used ascorbic acid method, simpler in application and the reagent is much more stable.     

Comparison of Colorimetric and ICP Methods of Phosphorus Determination in Soil Extracts

The traditional method for quantifying phosphorus (P) in Manitoba soil extracts is the molybdate blue–ascorbic acid colorimetric method. The shift from this traditional method to newer and more sophisticated analytical methods such as inductively coupled plasma (ICP) optical emission spectroscopy for P determination in soil extract could have serious implications on agronomic and environmental P management. Thus, the objectives of this study were to compare P determination by colorimetric and ICP methods in four extractants, namely Olsen, Mehlich 3, CaCl₂, and water extraction methods and to evaluate the possibility of developing conversion equations for P determination for the two methods in Manitoba soils. A laboratory experiment was conducted to establish relationships between P determination by colorimetric and ICP methods. Sixty surface soil samples (30 manured and 30 nonmanured) were collected from across Manitoba and extracted with Mehlich 3 reagent, Olsen solution, calcium chloride (CaCl₂) solution, and deionized water. Extractable P in the extract was determined by colorimetric (Col-P) and ICP (ICP-P) methods. The concentrations of P measured by the two methods were statistically analyzed. Mean comparison showed that P amounts determined by ICP in Mehlich 3, water, and CaCl₂ solutions were significantly greater than those determined by colorimetric method (P < 0.05) in the study. The differences between P determinations by the two analytical methods in the extractants were probably due to the presence of organic P, which was included in ICP determination but not in colorimetric determination. The influence of other factors such as the presence of colloidal particles on the P that was determined by the two methods could not be ruled out. However, Olsen P determined by the colorimetric method was not significantly different from the values determined by ICP (P > 0.05) probably because the alkaline nature of this extractant enhanced the hydrolysis of organic P in the extract, thus including organic P in the colorimetric determination of P. There were significant correlations between the two methods of P determination in the various extracting solutions with correlation coefficients ranging between 0.94 and 1.00. The two methods of P determination were linearly related for all the extracting solutions.     

The determination of hot‐water‐soluble boron in some acid Oregon soils using a modified azomethine‐H procedure

Abstract

A method is proposed for determination of hot‐water‐soluble boron in acid soils from western Oregon. The soil sample is boiled in 0.02 M CaCl₂, filtered, and B determined using azomethine‐H. Soils extracted in this way yielded extracts with little color in them and the predicted error due to this color was 0.00–0.07 ppm B. The use of charcoal as a decolorizing agent resulted in comparatively high predicted errors.

Inductively‐coupled plasma emission spectroscopic (ICP) analysis of distilled water and 0.02 M CaCl₂ extracts indicated that the extractable B level was not affected by the presence of CaCl₂. Azomethine‐H yielded comparable values to ICP but the curcumin method tended to give high values for hot‐water‐soluble B.     

Effect of liming and phosphate application on sudangrass growth and phosphorus availability in two temperate acid soils

Abstract

A pot experiment was carried out in the greenhouse with two loamy sand Dystric Cambisols derived from schist to investigate the effect of liming and phosphorus (P) application on plant growth and P availability and its assessment by four soil test methods: 0.01M calcium chloride (CaCl₂), cation anion exchange membrane (CAEM), Egnér‐Riehm, and Olsen procedures. Soils were first incubated for two weeks with lime at four levels, depending on their content of exchangeable aluminum (Al). Phosphorus was added at two rates (75 and 150 mg P kg^‐1) and the incubation proceeded for an additional two‐week period. Sudangrass (Sorghum sudanenses cv. Tama) was then planted and harvested four weeks later. During incubation and plant growth, soils were maintained at 70% of field moisture capacity. Although pH value and soil extractable P in original soils were similar, the results showed a significant difference on the effect of liming and P application. Acidity was the major limitation for DM yield in the soil with the highest amount of exchangeable Al, while P availability was the main constraint in the other soil. Liming above pH (0.01M CaCl₂) 5.3–5.5 did not increase DM yield in either soil and showed a negative effect on one soil (9.7 to 6.9 and 10.2 to 7.8 g pot^‐1). Phosphorus content and uptake by sudangrass increased with liming, revealing a positive effect of lime on the availability of P to plants. Added P showed a lower efficiency in the soil with highest amounts of Al compounds. Soil tests performed after the execution of the pot experiment showed variable tendencies to predict P availability, according to the nature of the procedures and soils. Soluble‐P in 0.01M CaCl₂ increased with the rise of soil pH. Extractable CAEM‐P and Egnér‐Riehm‐P also increased with liming, but reflected the soil depletion caused by plant uptake. Extractable Olsen‐P presented the most inconclusive results, suggesting the limitation of this method for acid soils which have been limed.     

Applicability of 0.01 M CaCl2 as a single extraction solution for the assessment of the nutrient status of soils and other diagnostic purposes

Abstract

The applicability of 0.01 M CaCl₂ solution as a single extraction agent for soils as a basis for fertilizer recommendation was tested on a variety of soils both from the Netherlands and from some tropical countries. Air‐dry soil samples were subjected to extraction with 0.01 M CaCl₂ and to several conventional extraction procedures, and the results were compared. In the soil suspensions pH was measured, whereas in the extracts Na, K, Mg, P, different extractable N‐forms and Zn were measured. The values found in CaCl₂ extracts are discussed in relation to results of other extraction procedures and as to their potential value in soil quality assessment. It is concluded that a single extraction procedure with 0.01 M CaCl₂ can be applied for fertilizer recommendation purposes. The possibility of determining different extractable N‐forms (NH₄, NO₃, soluble organic N) significantly enhances the value of the method in predicting the N‐fertilizer needs. Furthermore it was found that the concentration of Zn in 0.01 M CaCl₂ extracts was a good indicator of phytotoxicity in a polluted area. Additional advantages of this extraction are low costs, simplicity and repro‐ducibility.     

Change Point in Phosphorus Release from Variously Managed Soils with Contrasting Properties

Abstract

Investigating the relation between concentration or release of phosphorus (P) into soil solution (CaCl₂‐P, determined by 0.01 M CaCl₂ extraction of soils) and soil test phosphorus (Olsen P, or 0.5 N NaHCO₃‐extractable soil phosphorus) for 10 widely ranging and variously managed soils from central Italy, a change point was evident where the slopes of two linear relationships meet. In other words, it was possible to distinguish two sections of the plots of CaCl₂‐P against Olsen P, for which increases of CaCl₂‐P per unit of soil test P increase were significantly (p<0.05) greater above than below these change points. Values of change point ranged from 14.8 to 253.1 mg kg^?1 Olsen P and were very closely correlated (p<0.001) to phosphorus sorption capacity of soils. Similar change points were also previously observed when Olsen P (and also Mehlich 3 P) of surface soils was related to the P concentration of surface runoff and subsurface drainage. Because insufficient data are available relating P in surface soils and amount of P loss by overland, subsurface, or drainage flow, using the CaCl₂ extraction of soil can be convenient to determine a change point in soil test P, which may be used in support of agricultural and environmental P management.     

Wheat p requirements on calcareous Morrocan soils: III evaluation by isotherms compared to Olsen extractable P

Abstract

Phosphorus fertilizer recommendations were compared by interpretations from P isotherms, Olsen extractable P and the Mitscherlich‐Bray model based on the Olsen method for 15 soils from the Chaouia (dryland) region of Morocco. The P isotherms were fit to straight line and second degree polynomial equations. The P buffer indexes (PBI) derived from the isotherms were not significantly correlated to P buffer capacities as measured by a single P buffer capacity index, but negatively correlated to Olsen P (r = ‐0.63), relative yield (r = ‐0.76) and P uptake (r = ‐0.66). Phosphorus in solution was a quadratic function of P added in 0.01 M CaCl₂equilibrium solution. The P fertilizer recommendations to maintain soil solution P concentrations at 0.01, 0.12 and 0.20 mg P L^‐1were higher than recommended by direct interpretation of plant response to Olsen extractable P and the quantity based on the Mitscherlich‐Bray model as calculated from Olsen available P values. The P fertilizer recommended to maintain soil solution P of 0.10 mg P L^‐1was significantly correlated with Olsen P (r = 0.71) as was that recommended Mitscherlich‐Bray log transformation model (r = 0.81), and nonlinear least square estimation (r = 0.78). Field research will be needed to evaluate if the P fertilizer recommended to maintain this solution P concentration is adequate for maximum economic wheat grain yield under field conditions     

Automated determination of micro amounts of phosphate in dilute calcium chloride extracts of soils

Abstract

An Auto Analyzer II method for the colorimetric determination of micro amounts of phosphorus (<100 μg/L) in 0.01 M CaCl₂ soil extracts is described. The automated procedure gave results not significantly different from manual determinations.

Using data derived from four soils extracted in triplicate on three separate occasions, the relative confidence intervals for a single sample determination were found to be ± 10.6%.     

Precision of the Anion Exchange Membrane Phosphorus Technique When Using a Range of Low-Ionic Solutions in Analysis of Heterogeneous Mine Soils

The anion exchangeable membrane phosphorus (P) method can be used across a range of soils to analyze P for vegetation and has the potential to be applied to heterogeneous mine soils. Enhanced small-scale variability in mine soils can potentially cause enhanced and irregular P fluctuations during extraction, leading to errors in analysis of exchangeable membrane P. Anion exchange membranes in combination with low ionic solutions may be able to reduce this error and improve precision of the measurement. The authors undertake a full inorganic P fractionation to determine if the ionic solutions [deoionized water (DI), 0.01 M calcium chloride (CaCl₂), potassium chloride (KCl), and ammonium fluoride (NH₄F)] change the anion exchangeable membrane–extractable P and in turn the fractionation of P. In addition, the relationship between anion exchangeable membrane P and P-buffering index is analyzed to ascertain the accuracy of the methods. The precision and effect on subsequent P fractions for each extracting reagent was specific to the soil type, most likely related to cations in the soil. Use of NH₄F and DI with anion exchange membranes was a precise method [coefficient of variation (CV) < 20%] for measuring water exchangeable P, with no or minor changes to subsequent fractionations. Calcium chloride (CaCl₂) causes significant changes to P fractionations and resulted in highly variable (CV > 100%) results across all soils.     

Wheat P requirements on calcareous moroccan soils: I. A comparison of olsen,soltanpour and CaCl2soil tests

Abstract

Wheat [Triticum aestivum(L.)] is the major cereal crop of the Chaouia (dryland) region of Morocco. Efforts for self‐sufficiency in wheat will require improved fertility management on the calcareous soils of this region. This research was undertaken to evaluate the suitability of five soil P extractors for predicting the need for P fertilization on 15 important soils in this region. The Olsen (0.5MNaHCO³), the Soltanpour (1.0MNH₄HCO₃+ 0.005MDTPA) and their dilution modifications, and CaCl₂solution P method were evaluated in laboratory and greenhouse experiments.

Ten of the 15 soils responded to P fertilization. The five soils for which a significant P response was not measured were from the P plateau of the Chaouia region. The P extractors performed equally to predict the need for P fertilization. The critical levels below which a response would be highly probably and above which no response would be anticipated varied by extractor and method used to interpret the soil test values. A graphic method indicated the critical P values to be: Olsen 10.2, modified Olsen 18.0; Soltanpour 2.0; modified Soltanpour 12.5 and CaCl₂0.20 mg P kg^‐1. A second degree polynomial method indi cated the critical P values to be: Olsen 8.2; modified Olsen 14.0; Soltanpour 1.1; modified Soltanpour 5.1 and CaCl₂0.12 mg P kg^‐1. This limited data will permit the interpretation of soil test values as to whether a response to P fertilization is highly probable for the dominant soils of this wheat region.

Results from this study suggest that any of the five P extractors evaluated could be selected to calibrate P response under field conditions. It might be best to concentrate future research efforts on the Olsen test because most field P calibration data published with similar soils, climate and crops are with this extractor     

Evaluation of Universal Extractants for Determination of Some Macronutrients from Soil

Evaluation of nutrient status in soil is important for nutritional, environmental, and economical aspects. The objective of this work was to find out the most suitable universal extractant for determination of available phosphorus (P) and nitrate (NO₃-) and exchangeable potassium (K), calcium (Ca), and magnesium (Mg) from soils using 0.01 M calcium chloride (CaCl₂), 0.01 M barium chloride (BaCl₂), 0.1 M BaCl₂, 0.02 M strontium chloride (SrCl₂), Mehlich 3, and ammonium bicarbonate diethylene triamine penta acetic acid (AB-DTPA) extractants. Composite surface soil samples (0–20 cm) were collected from the Eastern Harage Zone (Babile and Haramaya Districts), Wolaita Zone (Damot Sore, Boloso Bombe, Damot Pulasa, and Humbo Districts), and Dire Dawa Administrative Council by purposive sampling. The experiment was carried out in a completely randomized design (CRD) with three replications. Results indicated that the greatest correlations were found between Mehlich 3 and Olsen method and also between 0.02 M SrCl₂ and Olsen method for available P. The amount of NO₃^– extracted by 0.02 M SrCl₂ was significantly correlated to the amount determined by 0.5 M potassium sulfate (K₂SO₄). The amounts of exchangeable K, Ca, and Mg determined by ammonium acetate (NH₄OAc) method were significantly correlated to the amount determined by universal extractants tested. In general, both 0.02 M SrCl₂ and Mehlich 3 can serve as universal extractants for the macronutrients considered in this study with the former being more economical when NO₃^– is included.     

Sorption of Phosphorus from Swine,Dairy, and Poultry Manures

In most phosphorus (P) sorption studies, P is added as an inorganic salt to a predefined background solution such as calcium chloride (CaCl₂) or potassium chloride (KCl); however, in many regions, the application of P to agricultural fields is in the form of animal manure. The purpose of this study, therefore, was to compare the sorption behavior of dissolved reactive P (DRP) in monopotassium phosphate (KH₂PO₄)–amended CaCl₂ and KCl solutions with sorption behavior of DRP in three different animal manure extracts. Phosphorus single‐point isotherms (PSI) were conducted on eight soils with the following solutions: KH₂PO₄‐amended 0.01 M CaCl₂ solution, KH₂PO₄‐amended 0.03 M KCl solution, water‐extracted dairy manure, water‐extracted poultry litter, and swine lagoon effluent. The PSI values for the dairy manure extract were significantly lower than the CaCl₂ solution for all eight soils and lower than the KCl solution for six soils. The PSI values were significantly higher, on the other hand, for poultry litter extract and swine effluent than the inorganic solutions in four and five of the soils, respectively. Our observations that the sorption of DRP in manure solutions differs significantly from that of KH₂PO₄‐amended CaCl₂ and KCl solutions indicates that manure application rates based on sorption data collected from inorganic P salt experiments may be inaccurate.     

Comparing tests for soil fertility: 1. Conversion equations between olsen and mehlich 3 as phosphorus extractants for 120 soils of south italy

Abstract

The multiple‐element extractant Mehlich 3 (M3) has not been tested extensively in Europe. In this Land, soil‐P test recommendations are based, since decades, on the evaluation of the Olsen‐extractable P, and the optimal soil‐P levels have been established to range between 1.5 and 3.0 mg of Olsen‐P per 100 g of soil. A research programme was started in order to assess the suitability of M3 as routine soil‐P test in European laboratories. As a first approach, we develop conversion equations from Olsen‐P to M3‐P, in order to assess the agreement and the consistency of the measurements under a wide range of chemical and physical soil properties. To this aim, 120 samples with drastically contrasting features were selected within 206 soils collected from all the regions of South Italy. Soil‐P ranges were 0.07–60.53 for M3, and 0.08–21.47 mg/100 g for Olsen. The results showed that M3‐P was a P extractant more efficient than Olsen. The amounts of M3‐P were, on the average, twice as large as the Olsen‐P ones, with mean values of 5.70 and 2.75 mg/100g, respectively. The soil properties exerted a great influence, as well as showed a contrasting effect, on the extraction efficiency of each method. For neutral‐alkaline calcareous soils, the average M3‐P/Olsen‐P ratio increased to 2.52, and the efficiency of M3 poorly varied according to soil pH and CaCO₃ content. On the contrary, in CaCO₃‐free acidic soils, the M3‐P/Olsen‐P ratio decreased to 1.63. In particular, anomalous ratio values less than 1.0 were observed for acidic soils with high content of organo‐mineral complexes with be shifted to 3.7–7.7 for calcareous soils, and to 2.7–4.9 for CaCO₃‐free soils. Field calibrations would give more information to establish the proper values according to either the soil properties and plant requirements. The results encourage the introduction of M3 as routine soil‐P test in our Countries. One must take into account, however, that some soil properties, in particular the CaCO₃ content, migth be considered for a more precise comparative evaluation with existing laboratory data.     

Divergent Relationships of Phosphorus Soil Tests in Temperate Grassland Soils

Abstract

Various soil tests are used to estimate phosphorus (P) availability for both crop uptake and potential loss to water. Conversion equations may provide a basis for comparison between different tests and regions, although the extent to which information can be interchanged is uncertain. The objective was to determine and quantify relationships between specific soil test extractants for samples taken annually in October and February over 4 years from four sites in each of eight soil series under grassland. The extractants comprised Mehlich‐3, Morgan, Olsen, Bray‐1, lactate–acetate, CaCl₂ (1∶2 and 1∶10 soil–solution ratios), and resin. The results showed distinct relationships for each soil series, for which individual lines regression models (different intercepts and slopes) were superior to a single conversion equation across all soils. The ensuing difference between soils was large and ranged from 1.9 to 8.0 and 9.2 to 15.6 mg kg^?1 P for Morgan and Olsen, respectively, at 20 mg kg^?1 Mehlich‐3 P. Generally, the environmentally oriented tests CaCl₂ and resin correlated best with Morgan. Some soil‐specific limitations were also observed. CaCl₂ was less efficient than Morgan, and Morgan less efficient than Mehlich‐3 on a high Fe–P soil derived from Ordovician‐shale diamicton, compared with the general trend for other soils. This finding suggests that further disparity may arise where evaluation of critical, or other, limits across regions involves even a limited sequence of tests.     

Different Fractions of Soil Potassium,Olsen Phosphorus,and Available Sulfur Status of Intensively Cultivated Berpura Soil Series of India and Nutrient Indexing of Rice Crop

Berpura alluvial soil series of the Indo‐Gangetic Plains is situated in the Ambala District of the Haryana State of India. Soils of this series had medium concentrations of both potassium (K) and phosphorus (P) and large concentrations of sulfur (S) before 1970. To study different fractions of K, Olsen P, and 0.15% calcium chloride (CaCl₂)–extractable (available) S of soils of the Berpura series and to create nutrient indexing of rice crops growing on this series, surface soil samples were collected from 100 farmers' fields after the harvest of the wheat crop in 2005. During kharif season of same year, samples of upper two leaves at anthesis growth stage of rice crop were also collected from the same 100 farmers' fields that had earlier been sampled for soil analysis. Analysis of soil samples showed more K depletion in soils of this series, of which 86% of farmers' fields were deficient in ammonium acetate (NH₄OAc) K (available K). Thirty and 62% of leaf samples of the rice crop growing on the 100 fields of this series were extremely and moderately deficient in K, respectively. The mean values of water‐soluble, exchangeable, nonexchangeable, lattice, and total K were 10.6, 30.3, 390.0, 8204, and 8635 mg kg^?1, respectively. In soils of this series, 0.123, 0.351, 4.517, and 95.009% of total K were found in water‐soluble, exchangeable, nonexchangeable, and lattice K forms, respectively. On the other hand, long‐term farmers' practice of more application of P fertilizer in wheat crop has resulted in P buildup in the soils of the Berpura series. Olsen P in soils of farmers' fields of this series ranged from 9.0 to 153.0 mg kg^?1, with the mean value of 41.8 mg kg^?1. Eighty‐two percent of leaf samples of rice crops grown on this series without application of P fertilizer were sufficient in P. The analysis of soil and rice crops for P and K proved the suitability of 0.5 M sodium bicarbonate (NaHCO₃) and 1 N NH₄OAc for extracting available P and K, respectively, in alluvial soils of the Indo‐Gangetic Plains. The 0.15% CaCl₂–extractable S in this soil ranged from 9.6 to 307 mg kg^?1 with a mean value of 34.6 mg kg^?1. Four and 26% of soil samples had low and medium, respectively, in 0.15% CaCl₂–extractable S. S deficiency was recorded in rice crops, as 29% of the leaf samples were extremely deficient in S and 58% were moderately deficient in S. This indicated the unsuitability of the 0.15% CaCl₂ to extract available S from the Udic ustochrept utilized for cultivation of rice crops.     

Phosphate sorption curves as a soil testing technique: A simplified approach

Abstract

Single point phosphate sorption curves effectively estimated phosphate fertilizer requirements while requiring less work than multiple point curves. Correlation coefficients of 0.961 and 0.981 were obtained when phosphate rates, estimated using single point curves, were compared with those from multiple point curves. Reducing the ionic strength of the supporting electrolyte solution by using 0.001 M CaCl₂ or water rather than 0.01 M CaCl₂ during equilibration increased dissolved inorganic phosphate 73% and 141% on the average thus improving analytical precision. The relative effects of salt concentration were sufficiently independent of pH and phosphorus concentration to suggest that a simple conversion factor can be used to convert external P requirements from one set of equilibrium conditions (salt concentration) to another.     

Critical Olsen P and CaCl2‐P levels as related to soil properties: results from micropot experiments

The usefulness of soil phosphorus (P) tests used in routine soil analyses is limited by the fact that a single measurement cannot encompass all P‐related factors potentially affecting plant performance. In this work, we performed micropot (15 mL) experiments to test the hypothesis that the predictive value of two common soil P tests (Olsen P and CaCl₂‐P) can be improved by considering properties commonly measured in laboratory analyses. Forty‐nine sets of soils ranging widely in properties were used for this purpose, each set consisting of samples with similar properties but differing in P status. Ryegrass and turnip were grown in a chamber for 30 days in two separate experiments and their yields at harvest recorded. The critical Olsen P and CaCl₂‐P levels, which were taken to be those corresponding to 95% asymptotic yield as calculated from data fitted to a Mitscherlich equation, were greater for turnip than for ryegrass, probably as a result of the difference in yield (49 and 160 mg dry matter/micropot on average for ryegrass and turnip, respectively) and hence in P requirements between the two species. Critical Olsen P spanned narrower ranges than critical CaCl₂‐P in both crops and is therefore seemingly the more robust of the two tests. Both critical P values exhibited moderate correlations with soil properties. Thus, critical Olsen P was (a) lower in soils with a medium pH – which is consistent with the fact that the bicarbonate solution method tends to overestimate plant‐available P in strongly acid and calcareous soils; (b) positively correlated with pH and carbonate content in calcareous soils; and (c) uncorrelated with soil properties in noncalcareous soils. On the other hand, critical CaCl₂‐P in some soil groups was negatively correlated with some properties increasing the P buffering capacity of soil (e.g. Fe oxide content). Taken together, our results suggest that routinely measured soil properties help to predict critical Olsen P better than critical CaCl₂‐P.     

Comparison of a hot water and cold 0.01 M Cacl2 extraction procedures for the determination of boron in soil

Abstract

In 100 different soils, hot (100C) water extractable boron was determined and the results were compared with boron data after extraction of the same soil samples with cold (20C) 0.01 M CaCl₂. Since the boron concentrations in cold soil extracts are too low for direct determination, the extracted boron was converted into BF4‐ and subsequently extracted with a liquid anion exchanger, Aliquat 336, into xylene, and measured by ICP‐AES. A linear relation with R² = 0.74 was found between the two tested procedures. It is, therefore, concluded that with a cold 0.01 M CaCl₂ extraction equally valuable soil boron values can be obtained as with the more difficult to standardize hot water extraction procedure.