Extractability and plant uptake of heavy metals in alum shale soils

Abstract

Fifty soil samples (0–20 cm) with corresponding numbers of grain, potatoes, cabbage, and cauliflower crops were collected from soils developed on alum shale materials in Southeastern Norway to investigate the availability of [cadmium (Cd), copper (Cu), zinc (Zn), lead (Pb), nickel (Ni), and manganese (Mn)] in the soil and the uptake of the metals by these crops. Both total (aqua regia soluble) and extractable [ammonium nitrate (NH₄NO₃) and DTPA] concentrations of metals in the soils were studied. The total concentration of all the heavy metals in the soils were higher compared to other soils found in this region. Forty‐four percent of the soil samples had higher Cd concentration than the limit for application of sewage sludge, whereas the corresponding values for Ni, Cu, and Zn were 60%, 38%, and 16%, respectively. About 70% the soil samples had a too high concentration of one or more of the heavy metals in relation to the limit for application of sewage sludge. Cadmium was the most soluble of the heavy metals, implying that it is more bioavailable than the other non‐essential metals, Pb and Ni. The total (aqua regia soluble) concentrations of Cd, Cu, Zn, and Ni and the concentrations of DTPA‐extractable Cd and Ni were significantly higher in the loam soils than in the sandy loam soils. The amount of NH₄NCyextractable metals did not differ between the texture classes. The concentrations of DTPA‐extractable metals were positively and significantly correlated with the total concentrations of the same metals. Ammonium nitrate‐extractable metals, on the other hand, were not related to their total concentrations, but they were negatively and significantly correlated to soil pH. The average concentration of Cd (0.1 mg kg^‐1 d.w.) in the plants was relatively high compared to the concentration previously found in plants grown on the other soils. The concentrations of the other heavy metals Cu, Zn, Mn, Ni, and Pb in the plants were considered to be within the normal range, except for some samples with relatively high concentrations of Ni and Mn (0–11.1 and 3.5 to 167 mg kg‘¹ d.w., respectively). The concentrations of Cd, Cu, Zn, Ni, and Mn in grain were positively correlated to the concentrations of these respective metals in the soil extracted by NH₄NO₃. The plant concentrations were negatively correlated to pH. The DTPA‐extractable levels were not correlated with plant concentration and hence DTPA would not be a good extractant for determining plant availability in these soils.     

Crop uptake of cadmium from phosphorus fertilizers: II. Relationship with extractable soil cadmium

In a greenhouse experiment, effects of different phosphate fertilizer applications on soil Cd extracted by DTPA and NH₄NO₃ in relation to plant uptake of Cd were investigated. The soils used were a sand and a loam treated with lime to achieve three pHs ranging from 4.77 to 5.94 for the sandy soil and 4.97 to 6.80 for the loam soil. Oat (Avena sativa L.), ryegrass (Lolium multiflorum L.), carrot (Daucus carota L.), and spinach (Spinacia oleracea L.), were used as test species. Application of the high-Cd NPK fertilizer (adding 12.5 μg Cd kg^?1 soil) significantly increased the extractable soil Cd, especially the DTPA-extractable Cd. Use of phosphate rock adding as much Cd as the high-Cd NPK fertilizer did not increase the extractable Cd in either of the soils. Both DTPA- and NH₄NO₃-extractable Cd decreased with the increases in soil pH. The Cd concentrations and total Cd uptake of plants were significantly correlated with the soil Cd extracted by DTPA and NH₄NO₃.     

Association of cadmium,zinc, copper,and nickel with components in naturally heavy metal‐rich soils studied by parallel and sequential extractions

Abstract

In this study, a new parallel and sequential extraction procedure was proposed to investigate the solubility of metals [cadmium (Cd), zinc (Zn), copper (Cu), and nickel (Ni)] and their association with soil components in naturally metal‐rich soils of Norway. Two different soils, alum shale (clay loam) and moraine (loam), developed on alum shale minerals were used. Each soil had two pH levels. For parallel and successive extractions, H₂O, 0.1M NH₄OAc (soil pH), 0.3M NH₄OAc (soil pH), 1M NH₄OAc (soil pH), and 1M NH₄OAc (pH 5.0) were used. A significant amount of Cd was extracted by NH₄O Ac related to concentration of NH₄OAc in the extracting solution. The amounts of Zn, Cu, and Ni extracted by these reagents were almost negligible except with 1M NH₄OAc (pH 5.0). Thus these metals were strongly bound to soil components. A seven step sequential extraction procedure was applied to evaluate the association of metals with soil constituents. The extractions were performed sequentially by extracting the soil with reagents having an increasing dissolution strength: 1M NH₄OAc (soil pH), 1M NH₄OAc (pH 5.0), 1M NH₂OH.HCl (in 25% HOAc), 1M NH₂OH.HCl (in 0.1M HNO₃), 30% H₂O₂ (in 0.1M HNO₃), 30% H₂O₂ (1M HNO₃), and aqua regia. In both soils at both pH levels investigated, appreciable percentages of total Cd (20–50%) were found associated with the NH₄OAc extractable fraction (mobile fraction). For Zn, Cu, and Ni, the percentage of total metal extracted with NH₄OAc was low (<4%), but it increased significantly by introducing a reducing agent (NH₂OH.HCl). The NH₂OH.HCl‐extractable fraction was the greatest fraction (>60%) for all four metals examined. These results suggest that among the metals studied, only Cd was easily desorbed from soil and should be considered mobile and potentially bioavailable. Other metals (Zn, Cu, and Ni) were strongly associated with the soil components and should be considered less available to plants. Using the sequential fractionation technique as a measure of availability, mobility and potential bioavailability of these four metals in the alum shale soils were: Cd>Zn>Ni>Cu.     

Plant Availability of Cadmium in Soils: II. Factors Related to the Extractability and Plant Uptake of Cadmium in Cultivated Soils

Abstract

Eighty four soil samples collected from southeastern Norway were analyzed for Cd by extraction with NH₄OAc, DTPA, NH₄OAc-EDTA, NH₄NO₃, HCl and CaCl₂. The total Cd, pH, exchangeable K and Ca, dithionite-extractable Mn, available P and fine sand (0.2–0.02 mm) contents were the principal factors related to the extractable Cd, with some inter-extractant variations. Cadmium extracted by NH₄NO₃, NH₄OAc, HCl and CaCl₂ decreased with increasing soil pH, but the Cd extracted by all the extractants increased with increasing total Cd, exchangeable K and Ca, available P, and Mn-oxide contents in the soils. The Cd concentrations in plants were significantly related to the extractable Cd, exchangeable Ca and Mg, pH, Mn-oxides and organic matter content.     

Plant Availability of Cadmium in Soils: I. Extractable Cadmium in Newly and Long-Term Cultivated Soils

Abstract

Effects of long-term use of phosphate fertilizers on extractable soil Cd in relation to its concentrations in plants were investigated. “Paired” soil samples were collected from newly and long-term cultivated fields and analyzed for Cd by extraction with NH₄OAc, DTPA, NH₄OAc-EDTA, NH₄NO₃, HCl and CaCl₂. Plant samples were also collected and analyzed for Cd. Significant differences in extractable Cd by all the extractants except NH₄NO₃ were observed between the newly and long-term cultivated soils. The Cd concentrations in plants were not increased by the elevated extractable Cd. Although significant relationships were observed between plant Cd and extractable soil Cd, none of the extractants used alone gave a good assessment of plant-available Cd for all the samples used in this study.     

Prediction of Soil Cadmium Bioavailability to Cacao (Theobroma cacao L.) using Single-Step Extraction Procedures

In this study, complexation extractants ammonium bicarbonate diethylene triamine pentaacetic acid (AB-DTPA), diethylene triamine pentaacetic acid (DTPA), and ethylene diamine tetraacetic acid (EDTA) and mild cation-exchange extractants calcium chloride (CaCl₂) and ammonium nitrate (NH₄NO₃) were used to evaluate the bioavailability of soil cadmium (Cd) to cacao in the field. Among the five extractants, the extractable Cd generally followed the order EDTA > DTPA > AB-DTPA > CaCl₂ > NH₄NO₃. Correlation analysis was done between the extractable Cd in soil and total Cd content of cacao tissues (nibs, shells, leaves, and pods). The Cd extracted by CaCl₂ and NH₄NO₃ was significantly (P < 0.05) correlated with some of the tissues but their Pearson correlation coefficients were weak. In contrast, extractants AB-DTPA, DTPA, and EDTA showed stronger, significant correlations to the Cd concentration in all four tissues. Overall, regression analysis demonstrated that AB-DTPA, DTPA, or EDTA can be used to predict bioavailable Cd in soils for cacao. Of these, AB-DTPA and DTPA both showed the strongest correlations compared to EDTA. However, the ease of preparation and the superior shelf-life of DTPA over AB-DPTA make it the preferred reagent for Cd bioavailability extractions from cacao soils and is currently being used to develop cost-effective soil treatments to reduce bioavailable Cd to cacao plants.     

Influence of phosphorus application on growth and cadmium uptake of spinach in two cadmium‐contaminated soils

A pot experiment was conducted to investigate the influence of phosphate (P) application on diethylene triamine pentaacetic acid (DTPA)–extractable cadmium (Cd) in soil and on growth and uptake of Cd by spinach (Spinacia oleracea L.). Two soils varying in texture were contaminated by application of five levels of Cd (NO₃)₂ (0, 20, 30, 40, and 60 mg Cd kg^–1). Three levels of KH₂PO₄ (0, 12, and 24 mg P kg^–1) were applied to determine immobilization of Cd by P. Spinach was grown for 60 d after seeding. Progressive contamination of soils through application of Cd affected dry‐matter yield (DMY) of spinach shoot differently in the two soils, with 67% reduction of DMY in the sandy soil and 34% in the silty‐loam soil. The application of P increased DMY of spinach from 4.53 to 6.06 g pot^–1 (34%) in silty‐loam soil and from 3.54 to 5.12 g pot^–1 (45%) in sandy soil. The contamination of soils increased Cd concentration in spinach shoots by 34 times in the sandy soil and 18 times in the silty‐loam soil. The application of P decreased Cd concentration in shoot. The decrease of Cd concentration was higher in the sandy soil in comparison to the silty‐loam soil. Phosphorus application enhanced DMY of spinach by decreasing Cd concentration in soil as well as in plants. The results indicate that Cd toxicity in soil can be alleviated by P application.     

Chemical and Mineralogical Properties of Norwegian Alum Shale Soils,with Special Emphasis on Heavy Metal Content and Availability

Abstract

Alum shale and till soils overlying alum shale bedrock were analysed for aqua regia and NH₄OAc/EDTA extractable Pb, Cu, Zn, Ni, Mn and Cd. The means of these determinations were compared with those of Norwegian, Finnish and Swedish non-alum shale soils. Alum shale soils seemed to contain higher amounts of both total and easily extractable Cu, Zn, Ni and Cd. Total Pb content also seemed to be higher in the alum shale soils. The relative availability of Cd, Ni and Mn, expressed as the ratio of NH₄OAc/EDTA to aqua regia extractable, was found to be greater than that of Pb, Cu and Zn in the alum shale and till soils.     

Effect of organic matter on the distribution, extractability and uptake of cadmium in soils

Distribution and plant uptake of soil Cd as influenced by organic matter and soil type were investigated in a greenhouse experiment. Three soils (a sand, sandy loam and clay loam) were used. The rates of organic matter in its moist state added were 0,20,40, 80, 160 and 320 g kg^-1 of the air-dried soil on mass basis. Ryegrass (Lolium multörum L.) was used as a test crop. Soil Cd was analysed by a sequential extraction technique and by extraction with 1 M NH₄NO₃ and 0.005 M DTPA. The exchangeable fraction of Cd as determined by 1 M MgCl₂ in the sequential extraction procedure increased, whereas the Fe-Mn oxidebound fraction decreased, with increasing levels of organic matter addition in all three soils. The dry matter yields of ryegrass were not affected by the addition of organic matter, but the Cd concentrations in both cuts of ryegrass decreased with increasing amounts of organic matter added. The plant Cd was highly but negatively correlated to soil CEC. At any level of organic matter addition, the decrease in Cd concentration of ryegrass was in the order: sand > sandy loam > clay loam.     

Cadmiumverfügbarkeit für Gemüsepflanzen in Kleingartenböden

Availability of cadmium for vegetable plants in allotment soils Pot experiments with soils from allotments of Hamburg and different vegetables were carried out to determine the mobility and plant availability of cadmium. Total soil Cd-contents in combination with other soil properties as well as 0.1 M CaCl₂ and 1 M NH₄NO₃ extractable Cd were tested with regard to forecasting the Cd-uptake by plants. A direct comparison of these methods and their suitability is given. Soil threshold values were derived, which possibly result in Cd-plant uptake and Cd-contents exceeding the actually valid limits in food. These threshold values were evaluated for three testing methods: Total soil Cd-content in combination with pH as well as 0.1 M CaCl₂ and 1 M NH₄NO₃ extractable Cd.     

Verhalten von Schwermetallen in Böden. 2. Extraktion mobiler Schwermetalle mittels CaCl2 und NH4NO3

Behaviour of heavy metals in soils. 2. Extraction of mobile heavy metals with CaCl₂ and NH₄NO₃ 156 soil samples from arable fields, grassland and forest stands were analysed for the CaCl₂^? and NH₄NO₃^? extractable contents of Cd, Zn, Mn, Cu and Pb. The average amounts of Cd, Zn, Cu and Pb extracted with CaCl₂ are higher compared with NH₄NO₃ whereas the relation for Mn is vice versa. The proportion of the NH₄NO₃^? extractable contents in percent of the CaCl₂^? extractable contents of Cd, Zn and Pb decrease with increasing pH, whereas the contents of Mn and Cu increase. Inspite of a differing extraction behaviour of the two salt solutions the CaCl₂^? and NH₄NO₃^? extractable amounts of Cd, Mn, Zn und Pb are highly correlated and can be converted one into another. The mobile (CaCl₂, NH₄NO₃) proportion of the corresponding total, EDTA and DTPA heavy metal contents is in close relation to the pH of the soils. Using CaCl₂ solution the threshold pH values for an increasing mobility decrease in the order Cd > Mn > Zn > Cu > Pb, using NH₄NO₃ as extractant the order is Mn > Cd > Zn > Cu > Pb. In the case of CaCl₂ as extractant soluble chloro-Cd-complexes will be formed so that the Cd mobility in soils will be overestimated in most cases.     

Prediction of available heavy metals by six chemical extractants in a sewage sludge‐amended soil

Abstract

In a field experiment conducted during three years in a sandy‐loam, calcareous soil, one aerobically digested sewage sludge (ASL) and another anaerobically digested sewage sludge (ANSL) were applied at rates of 400, 800, and 1,200 kg N/ha/year, and compared with mineral nitrogen fertilizer at rates of 0, 200, 400, and 600 kg N/ha/year in a cropping sequence of potato‐corn, potato‐lettuce, and potato, the first, second, and third year, respectively. Results showed that the highest values of soil extractable metals were obtained with aqua regia, whereas the lowest levels with DTPA. All metal (Zn, Cu, Cd, Ni, Pb, and Cr) gave significant correlations between metal extracted with the different extractants and metal loading applied with the sludges. The metal extractable ion increased over the control for Zn, Cu, Cd, Ni, Pb, and Cr extracted with DTPA, EDTA (pH 8.6) and 0.1 N HC1, for Zn, Cd, Ni, Pb, and Cr extracted with EDTA (pH 4.65) and AB‐DTPA, and for Zn, Cd, Ni, and Cr extracted with aqua regia. The level of metal‐DTPA extractable resulted highly correlated with that obtained by the other methods, except the Ni‐aqua regia extractable. The soil extractable elements which showed significant correlations with metals in plant were: Zn, Cu, Cd, and Ni in potato leaves, Cd, Ni, and Pb in corn grain, and Zn and Cd for lettuce wrapper leaves. In general, all the chelate based extractants (DTPA, EDTA pH 4.6, EDTA pH 8.6, AB‐DTPA) were equally useful as indicator of plant available metals in the soil amended with sludge.     

Development of a New Soil Extractant for Simultaneous Phosphorus,Ammonium, and Nitrate Analysis

Abstract

A new soil extractant (H³A) with the ability to extract NH₄, NO₃, and P from soil was developed and tested against 32 soils, which varied greatly in clay content, organic carbon (C), and soil pH. The extractant (H³A) eliminates the need for separate phosphorus (P) extractants for acid and calcareous soils and maintains the extract pH, on average, within one unit of the soil pH. The extractant is composed of organic root exudates, lithium citrate, and two synthetic chelators (DTPA, EDTA). The new soil extractant was tested against Mehlich 3, Olsen, and water for extractable P, and 1 M KCl and water‐extractable NH₄ and NO₂/NO₃. The pH of the extractant after adding soil, shaking, and filtration was measured for each soil sample (5 extractants×2 reps×32 soils=320 samples) and was shown to be highly influential on extractable P but has no effect on extractable NH₄ or NO₂/NO₃. H³A was highly correlated with soil‐extractable inorganic N (NH₄, NO₂/NO₃) from both water (r=0.98) and 1 M KCl (r=0.97), as well as being significantly correlated with water (r=0.71), Mehlich 3 (r=0.83), and Olsen (r=0.84) for extractable P.     

不同调理剂对农田镉污染稳定效果及水稻吸收的影响

采集浙江杭州郊区富春江沿岸镉(Cd)污染水稻土，选择前期试验筛选的对土壤Cd钝化效果良好、可显著降低稻米Cd的4种调理剂，开展室内培养试验和温室盆栽试验，探讨不同调理剂种类(袁梦YM、祝天峰ZTF、天象一号TX1、永清YQ)、用量(推荐用量、3倍推荐用量)和调理剂与生石灰配施对污染水稻土Cd的稳定效果及对水稻生长和糙米Cd含量的影响。室内培养试验结果发现，添加调理剂能使土壤pH显著升高，落干条件下土壤pH增幅较淹水条件下更为明显；施用推荐用量调理剂，土壤硝酸铵提取态Cd显著下降，调理剂推荐用量+生石灰处理较调理剂推荐用量处理下降更为显著；总体上，同一调理剂3倍推荐用量处理下硝酸铵提取态Cd降幅更大，表明硝酸铵提取态Cd受土壤pH影响显著，且YM、TX1调理剂对硝酸铵提取态Cd的降低效果较好。盆栽试验结果显示，施用石灰和商品调理剂均可实现水稻稳产或增产，并显著降低水稻糙米Cd含量，与调理剂施用后土壤Cd有效性降低相一致。含钙、能调节土壤pH并辅以有机质和养分的复合调理剂因兼具养分作用，对水稻稳产增产、糙米Cd含量降低更为有效。     

An evaluation of chemical methods for extracting copper from rice soils

Abstract

Rice (Oryza sativaL. CV. Lemont) was grown on 19 soils, and eight extractants were evaluated for determining the availability of Cu to rice plants. Correlation analyses were employed as criteria for evaluating methods that would provide the best index of Cu availability. The order of removal of Cu from soils was: 0.5NHC1 + 0.05NA1C1₃> 0.5NHNO₃> 0.5 N HC1 > EDTA + NH₄OAc > 0.1NHC1 > EDTA + (NH₄)₂CO₃? DTPA‐TEA, pH 7.3 >>> 1 N NH₄0Ac, pH 4.8.

Uptake of Cu by rice plants was significantly correlated with soil Cu. Among the eight extractants evaluated, Cu extracted with DTPA‐TEA, pH 7.3 was better related to the concentration (r = 0.563 ) and uptake (r = 0.673 ) of Cu by rice plants grown on the soils with different chemical and physical properties.

A significant negative correlation was found between the concentration of Cu in rice plants and the organic matter content of the soils. Each one percent increase in the organic matter of the soils resulted in a corresponding decrease of approximately one mg/kg in the concentration of Cu in the rice‐plant tissue. Multiple regressions of extractable Cu by eight methods with soil organic matter content accounted for from 53.4 to 70.0% of the variations in the prediction of the concentration of Cu in the rice plants. Combinations of other soil chemical properties measured with extractable Cu did not significantly improve the predictability     

Comparison of soil zinc extractants for detection of applied zinc and prediction of leaf zinc concentration

Abstract

Many soil extractants have been developed for determination of zinc (Zn) availability to plants. The optimum soil Zn extractant should be useful not only for prediction of plant Zn concentration but also for detection of applied Zn levels. The objectives of this study were: i) to compare soil Zn extradants for detecting applied Zn and for predicting peanut leaf Zn over a range of soil pH levels, and ii) to correlate other soil‐extractable Zn levels with Mehlich‐1. Soil and peanut leaf samples were taken from a field study testing pH levels as the main plots and Zn application rates in the sub‐plots. Extractable Zn was determined on soil samples using Mehlich‐1, Mehlich‐3, DTPA, MgNO₃, and many dilute salt extradants of varied strength and pH. Correlation of extractable soil Zn to cumulative applied Zn levels revealed Mehlich‐1, Mehlich‐3, DTPA, and AlCl₃ extradants to be among the best indicators of applied Zn. Leaf Zn concentration was best correlated with soil Zn extracted by dilute salts, such as KCl, CaCl₂, NH₄Cl, CaSO₄, and MgCl₂. Including soil pH as an independent variable in the regression to predict leaf Zn considerably improved R‐square values. The DTPA‐extractable soil Zn levels were very well correlated with Mehlich‐1‐extractable Zn. Mehlich‐3 extracted about 20% more soil Zn than Mehlich‐1, but Mehlich‐3 soil Zn was not as well correlated to Mehlich‐1 soil Zn as DTPA soil Zn. Lower pH solutions extracted more of the applied Zn, but more neutral solutions extracted Zn amounts which were better correlated with Zn uptake. On the other hand, Mehlich‐1, which had a lower pH, had better correlations with both applied Zn and leaf Zn than did Mehlich‐3. Shortening the DTPA extraction time to 30 minutes resulted in better correlations than the standard two hour extraction time. Chloride (Cl) was the best anion tested in relation to soil applied Zn recovery in combination with potassium (K), calcium (Ca), and aluminum (Al), and Cl optimized leaf Zn correlations for ammonium (NH₄), K, Ca, and magnesium (Mg). The larger the valence of the cation, the better the correlation with applied Zn and the poorer the correlation with leaf Zn.     

Heavy‐metal mobilization and uptake by mycorrhizal and nonmycorrhizal willows (Salix × dasyclados)

Ectomycorrhizal fungi have been shown to affect metal transfer from the soil to the host plant, but the use of these fungi for increased phytoextraction of heavy metals has been scarcely investigated. Therefore, a two‐factorial pot experiment was conducted with Salix × dasyclados and (1) two contaminated soils with different concentrations of NH₄NO₃‐extractable metals and (2) two strains of the ectomycorrhizal fungus Paxillus involutus (one strain originating from a noncontaminated site—Pax1, and another from a contaminated site—Pax2). The inoculation with Pax2 increased the phytoavailability of Cd in the soils. Inoculation with both fungal strains increased the stem and root biomass, but had no effect on metal concentrations in the stems. Decreased Cd and increased Cu concentrations were observed in the roots of inoculated willows. The inoculation with P. involutus increased Cd (up to 22%), Zn (up to 48%), and Cu content in the stems. Decreased Pb content (Cu and Pb content were always <1 mg per plant) occurred in the stems from plants at the soil with the higher concentration of NH₄NO₃‐extractable metals. Contrary to this, in the soil with lower concentrations of NH₄NO₃‐extractable metals, the inoculation had no significant effects on the total uptake of Zn and Cu and even caused decreased Cd (Pax2) and Pb (Pax1) contents in the stems. Strain Pax2 had higher colonization densities, but the plants had lower mycorrhizal dependencies in the contaminated soils than after inoculation with the strain Pax1. Generally, metal extractability in the soils substantially affected the mycorrhizal dependency and heavy‐metal uptake of the willows. We concluded, that the inoculation with P. involutus offers an opportunity to particularly increase the phytoextraction of Zn, but the metal extractability and fungal strain effects have to be tested.     

Reference concentrations for heavy metals in mineral soils, oat, and orchard grass (Dáctylis glomeráta) from three agricultural regions in Norway

Background values for heavy metals are necessary for the assessment of metal pollution of soils and plants. Samples of cultivated and uncultivated soils, oat grain, and seed heads of orchard grass (Dáctylis glomeráta) were collected from central, southeastern, and southwestern Norway. Total and easily extractable concentrations of As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn were determined in soil samples and total concentrations in plant samples. Element distributions have been correlated with petrology of soil parent material, type of mineral deposit, soil depth, geographic area, and land use. Concentrations of heavy metals are generally within the lower part of the normal global range. The petrology of the soil parent material has the greatest influence on aqua regia extracted metal concentrations among the factors studied. DTPA extracted metals show less dependence on rock types. Presence of alum shale results in particularly high values for Cd in both soil extracts and in oat grain. Soil cultivation seems to influence the relative concentration of metals in the topsoil. The ratios of easily extractable to total concentrations of metals are primarily related to the organic matter content. Metal concentrations in oat grain can best be predicted by concentrations in DTPA extracts and soil pH among the factors studied. Seed heads of orchard grass are less affected by concentrations in the soil and appear therefore to be a poor indicator of heavy metals in soils.     

Effects of soil ph,nitrogen source,phosphorus, and molybdenum on early growth and mineral nutrition of burley tobacco

Abstract

Previous research has indicated that P application may influence plant Mo nutrition, and that both P and Mo are influenced by soil pH. This is of interest, since Mo is deficient in some soils and because large quantities of acidifying nitrogenous fertilizers are commonly applied in production of burley tobacco (Nicotiana tabacum L.).

Burley tobacco was grown in two experiments using Maury silt loam soil (Typic Paleudalfs) to determine the influence of soil acidity, form of N applied, and P application on plant growth and mineral nutrition. The studies were conducted in the greenhouse so that high root densities would develop and the data primarily reflect rhizosphere effects.

Ammonium application depressed rhizosphere pH 0.4 to 0.6 pH units. Nitrate nutrition raised soil pH less than 0.1 pH unit. Plants supplied NH₄ exhibited slower early growth than plants supplied NO₃. Several significant interactions involving soil pH, N source, P, and Mo occurred. In the first experiment, plant P was not affected by form of N applied, while in the second experiment NH₄ application resulted in higher plant P concentration, both in presence and absence of applied P. Application of NH₄ also increased plant weight in the second experiment. Plant P concentration was influenced by pH, being greatest at pH 6.2 and decreasing as pH levels decreased or increased. Plant Mo concentration did not differ among forms of N at pH 5.4, but at pH 7.2 was three times greater in the presence of NO₃. When Mo was applied, P addition enhanced plant Mo concentration, but when Mo was not applied, P addition did not increase Mo concentration. This effect of P on Mo occurred only in the presence of N and was greater in the presence of NH₄ than NO₃. These observations suggest that enhancement of plant Mo nutrition by P application may be dependent on adequate levels of N being present.     

Influence of air drying and soil gas‐phase carbon dioxide on DTPA‐extractable iron in calcareous soils

Abstract

The extraction of a field‐moist soil with DTPA will result in a level of extractable iron (Fe) lower than that of the air‐dried soil. Soil gas‐phase carbon dioxide (CO₂) levels may be considerably higher than ambient atmospheric levels, especially in wet soils in the field. This study was undertaken to determine whether gas‐phase CO₂ level influences the quantity of Fe extracted by DTPA. Three moist calcareous soils were incubated for 21 days, each at three different partial pressures of CO₂, after which the moist soils were extracted with DTPA. A sample of each soil was also air dried, and was subsequently extracted with DTPA. In each case, DTPA‐extractable Fe from the moist sample was lower than that from the air‐dried sample; however, DTPA‐extractable Fe increased with increasing CO₂ partial pressure of in the moist soils. DTPA‐extractable Fe concentration for a given soil following air drying was not significantly influenced by the CO₂ partial pressure during incubation of the originally field‐moist soil. DTPA‐extract pH of the moist soils followed the same trend as soil‐solution pH (i.e., as CO₂ concentration of the soil gas‐phase increased, soil solution pH and DTPA extract pH both decreased); however, the slope of the pH versus log P_CO2 curve was less pronounced in the DTPA extract due to the buffering capacity of the triethanolamine. From this study, it is concluded that elevated soil gas‐phase CO₂ partial pressure does not contribute to the lower level of DTPA‐extractable Fe observed when the extraction is performed on a field‐moist versus an air‐dried soil; increased CO₂ partial pressure actually resulted in a slight increase in concentration of DTPA‐extractable Fe obtained from a field‐moist soil.