Color variation and correlations in <Emphasis Type="Italic">Eucalyptus dunnii</Emphasis> sawnwood

A study of material thinned from a 9-year-old Eucalyptus dunnii progeny trial revealed that E. dunnii has light yellowish wood that is relatively uniform in color, and varies little within and between trees. The variation in color between half-sib families is small, but is statistically significant (P = 0.008). Most of the color variation relates to the yellowness (CIE b*) of the wood, which in heartwood is moderately heritable (h = 0.6). The color of the endgrain, especially its lightness (CIE L*) and whiteness index (E313), is correlated with basic density, hardness, and rates of shrinkage. The CIE rectangular opponent scale (L*, a*, b*) appeared to be the most informative about wood color and properties, and no additional information was gleaned from an analysis of full spectral data in the range 400–700 nm.     

Successful <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation of <Emphasis Type="Italic">Populus tomentosa</Emphasis> with apple <Emphasis Type="Italic">SPDS</Emphasis> gene

The problem of salinized soils has become one of the most serious constraints to agricultural and forest productivity. With the purpose of enhancing salt stress tolerance of Populus tomentosa, we transformed this tree species with spermidine synthase （SPDS） genes derived from an apple by an Agrobacterium-mediated method. Four transgenic clones were confu＇med by PCR and Southern blot analysis. As well, the expression of introduced SPDS genes was analyzed by real-time quantitative PCR.     

Effect of stocking on juvenile wood stiffness for three <Emphasis Type="Italic">Eucalyptus</Emphasis> species

The effects of stocking on wood stiffness (MoE) for three Eucalyptus species are quantified using a 6-year-old trial established in New South Wales, Australia. An acoustic time-of-flight tool measured the velocity between two probes in the outerwood, from which the stiffness was estimated. Four stocking levels (714, 1,250, 1,667 and 3,333 sph) were examined. Stiffness varied significantly between all species, with E. cloeziana showing the highest stiffness (14.2–15.7 GPa), followed by E. pilularis (12.2–13.5 GPa) and E. dunnii (10.7–12.6 GPa). There was a stiffness increase (around 11%) between 714 and 1,250 stems/ha for all species but thereafter differences between stockings were not always significant. Trees were also assessed for basic density, dbh, total height, crown area, green crown height and stem slenderness (height/dbh). Only stem slenderness had a significant association (0.41 ± 0.17) with stiffness. These findings suggest that, where stiffness is a priority, forest managers could reduce establishment costs with low stockings (around 1,250 stems/ha).

Role of <Emphasis Type="Italic">tao</Emphasis> (<Emphasis Type="Italic">Belotia mexicana</Emphasis>) in the traditional Lacandon Maya shifting cultivation ecosystem

For centuries, the Lacandon Maya have farmed the forest while also preserving and regenerating it. The Lacandon manage their fallow by planting certain tree species, and removing volunteer trees that are not optimal for soil fertility. This study focused on tao (Belotia mexicana), one of the Lacandon tree fallow species, and its impact on the soil as it matures in the secondary forest. The effect of tao on soil fertility was evaluated using the following soil fertility parameters: phosphorus, carbon, nitrogen, earthworm density, pH, and soil moisture. Results were compared using a split-plot analysis. Soil C:N ratios decreased with age of tao, indicating an improvement of litter quality over time. Soil extractable phosphorus decreased with age of tao and increased with distance from tao, which suggests that tao is depleting phosphorus. These results provide an introduction for further analysis into how native trees enhance soil fertility in the Lacandon system.     

Establishment of native <Emphasis Type="Italic">Eucalyptus pauciflora</Emphasis> and exotic <Emphasis Type="Italic">Eucalyptus nitens</Emphasis> on former grazing land

The success of tree plantings in agricultural landscapes within dry and variable rainfall regions is often below expectations. The aims of this study were to investigate techniques for establishing a local native species (Eucalyptus pauciflora) and an exotic species (E. nitens) in the Midlands of Tasmania, a tree-denuded region that has been grazed for over 100 years in Australia. We established trials at the Sorrel Springs and Woodland Park properties. We compared six establishment techniques: control; understorey nurse planting; spot burn; mulch; tree-guard and; self-watering tree-guard. Three months, 1 and 6 years after planting we measured tree height, health index and mortality. At Sorrell Springs tree-guarded treatments had greater height than other treatments at year one, but there were no effects of treatment at year six on height, health or mortality. At Woodland Park mulch, burn and tree-guarded treatments had greater height 1 and 6 years after planting. At year six tree-guarded treatments had lower mortality than other treatments. At Sorrell Springs height of E. nitens was greater than E. pauciflora at year one but not at year six. At Woodland Park height of E. nitens was generally greater at year six but having almost double the incidence of mortality relative to E. pauciflora. We conclude that expensive tree-guarding is only warranted where high browse pressure is expected and that on such sites species with tough leaves that are resistant to browsing should be considered. Further that in environments marginal for growing trees, best practice establishment technique is generally as effective as additional treatments of understorey nurse planting, spot burning or mulching.     

Within tree variability of lignin composition in <Emphasis Type="Italic">Populus</Emphasis>

Clonal variability among trees has been studied and found to have profound effects on nearly all measured phenotypes. However, when estimating wood properties it is important to consider variability within the tree. The position in which a tree is sampled could have a large influence on biomass characterization. We looked at variability in lignin content as height increases and as the number of rings from the pith increase in Populus species. Seven trees were destructively sampled; subsamples were obtained along a 2.4 m length of each stem and across increment rings. All samples were analyzed by pyrolysis molecular beam mass spectroscopy to map the variability across sampling heights and/or ring positions in lignin content. The results of this study indicate that when sampling a tree, there is more variability from ring to ring than at different heights going up the stem.     

Acetic acid fermentability with <Emphasis Type="Italic">Clostridium thermoaceticum</Emphasis> and <Emphasis Type="Italic">Clostridium thermocellum</Emphasis> of standard compounds found in beech wood as produced in hot-compressed water

Acetic acid fermentability of various compounds from beech wood as produced in a two-step hot-compressed water treatment was evaluated by fermentation tests using standard compounds with Clostridium thermoaceticum and Clostridium thermocellum. For cellulose- and hemicellulose-derived products, the former microorganism was found to ferment compounds with low molecular weights such as monosaccharides, decomposed products, and organic acids to acetic acid, while the latter was found to ferment compounds with high molecular weights such as polysaccharides and oligosaccharides to acetic acid. Lignin-derived products were, on the other hand, fermented by both microorganisms to acetic acid. Based on these lines of evidence, co-culture with C. thermoaceticum and C. thermocellum was evaluated and proven to increase acetic acid fermentability. Consequently, almost all compounds produced from beech wood in hot-compressed water were found to be converted to acetic acid when using these microorganisms in combination. Thus, hot-compressed water treatment coupled with acetic acid fermentation would likely be a powerful method to produce acetic acid from lignocellulosics.     

Bioremediation of CCA-treated wood by brown-rot fungi <Emphasis Type="Italic">Fomitopsis palustris</Emphasis>, <Emphasis Type="Italic">Coniophora puteana</Emphasis>, and <Emphasis Type="Italic">Laetiporus sulphureus</Emphasis>

This study evaluated oxalic acid accumulation and bioremediation of chromated copper arsenate (CCA)-treated wood by three brown-rot fungi Fomitopsis palustris, Coniophora puteana, and Laetiporus sulphureus. The fungi were first cultivated in a fermentation broth to accumulate oxalic acid. Bioremediation of CCA-treated wood was then carried out by leaching of heavy metals with oxalic acid over a 10-day fermentation period. Higher amounts of oxalic acid were produced by F. palustris and L. sulphureus compared with C. puteana. After 10-day fermentation, oxalic acid accumulation reached 4.2 g/l and 3.2 g/l for these fungi, respectively. Fomitopsis palustris and L. sulphureus exposed to CCA-treated sawdust for 10 days showed a decrease in arsenic of 100% and 85%, respectively; however, C. puteana remediation removed only 18% arsenic from CCA-treated sawdust. Likewise, chromium removal in F. palustris and L. sulphureus remediation processes was higher than those for C. puteana. This was attributed to low oxalic acid accumulation. These results suggest that F. palustris and L. sulphureus remediation processes can remove inorganic metal compounds via oxalic acid production by increasing the acidity of the substrate and increasing the solubility of the metals.An erratum to this article can be found at     

Ring characteristics and screw withdrawal resistance of naturally regenerated <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> var. <Emphasis Type="Italic">formosana</Emphasis> trees

The ring characteristics and screw withdrawal resistance (SWR) of naturally regenerated Taiwan yellow cypress (Chamaecyparis obtusa var. formosana) trees were explored. Significant differences in average ring width (RW), earlywood width, latewood width, ring density (RD), earlywood density (ED), latewood density (LD), highest density (D_max), lowest density (D_min), latewood percentage (LWP), and SWR were observed between trees, rings (SWR excluded), and tree height positions. The RW components in the radial direction increased from the pith outward to about the 3rd to 5th ring and then decreased to about the 25th ring; it was almost constantly sustained toward the bark side. The RD in the radial direction slowly decreased from the pith outward to the bark side. Average ring width and ring density were significantly affected by the various tree growth rates, radial ring numbers, and tree height positions. ED, LD, D_max, D_min, and LWP were the most important factors determining the overall RD. RW did not correlate with tree RD. SWR is correlated with ED, RD, D_min, LWP, and intra-ring density variation (IDV). Thus, the SWR can be used to predict wood density and in nondestructive evaluation of a living tree.     

Enzymatic saccharification and ethanol production of <Emphasis Type="Italic">Acacia mangium</Emphasis> and <Emphasis Type="Italic">Paraserianthes falcataria</Emphasis> wood,and <Emphasis Type="Italic">Elaeis guineensis</Emphasis> trunk

We examined the saccharification and fermentation of meals from Acacia mangium wood, Paraserianthes falcataria wood, and Elaeis guineensis trunk. The levels of enzymatic hydrolysis of cellulose and ethanol production were highest for P. falcataria wood and lowest for A. mangium wood. Ultrasonication pretreatment of meal further increased the rates of hydrolysis and ethanol production in meal from P. falcataria wood. Through this pretreatment, hemicelluloses (xylan and xyloglucan) and cellulose were released in the meal from P. falcataria wood. Loosening of hemicellulose associations can be expected to make P. falcataria wood more useful for bioethanol production.     

New piezoelectric moduli of wood: <Emphasis Type="Italic">d</Emphasis><Subscript>31</Subscript> and <Emphasis Type="Italic">d</Emphasis><Subscript>32</Subscript>

This article reports the piezoelectric moduli of wood d ₃₁, d ₃₂, and d ₃₆. The piezoelectric moduli of wood d ₃₁ and d ₃₂ have not been previously reported, although there has been much research on the d ₁₄ and d ₂₅ moduli of wood. The moduli d ₃₁, d ₃₂, and d ₃₆ were measured carefully because their absolute values were considerably smaller than those of d ₁₄ and d ₂₅. For Softwoods, d ₃₆ values were mostly negative, whereas the values for hardwoods had either positive or negative values. The other moduli, d ₃₁ and d ₃₂, were a mixture of positive and negative values in softwoods and hardwoods. The existence of d ₃₁ and d ₃₂ suggests the presence of an electrical polarity of the cellulose crystal in the fiber direction of the wood. The polarities of d ₃₁ and d ₃₂ became clear from wood in the outer part of the trunk, where the crystallinity of cellulose is large and the alignment of the crystals becomes parallel to the fiber direction.     

Germination and seedling growth of <Emphasis Type="Italic">Dimorphandra jorgei</Emphasis> MF Silva and <Emphasis Type="Italic">Swartzia macrostachya</Emphasis> Benth. var. <Emphasis Type="Italic">riedelii</Emphasis> Cowan

Dimorphandra jorgei MF Silva (Caesalpinaceae) and Swartzia macrostachya Benth. var. riedelii Cowan (Fabaceae) are tree species from the southern Bahian Atlantic Forest, identified for the restoration of degraded areas. The objective of this research is to study their seed germination and seedling growth to develop simple methods for seedling production in small scale nurseries. Because the species have distinct dormancy and germination characteristics, the seeds were submitted to different treatments. D. jorgei seeds were immersed in hot water, scarified and stored for 12 weeks in the laboratory environment (25°C). S. macrostachya seeds were submitted to different combinations of drying and storage in the laboratory environment or refrigerator (4°C). Seedlings were submitted to two light treatments for 3 months: partial shade (52% of full sun) and full shade (12% of full sun). In D. jorgei, the highest germination occurred for scarified seeds (87%) and for seeds stored for 12 weeks and then scarified (69%). In S. macrostachya the undried control seeds had the highest germination, followed by that of the refrigeration storage treatment, without predrying (99% and 97%, respectively). The average values for the growth parameters were greater in full shade for D. jorgei, while S. macrostachya seedlings showed greater growth rates in partial shade. Two months growth is recommended before D. jorgei seedlings are of the sufficient size and leaf number for field planting. On the other hand, a period of 4 months is recommended for S. macrostachya, due to its relatively slow growth.     

Assessment of crown woody biomass in <Emphasis Type="Italic">Eucalyptus grandis</Emphasis> and <Emphasis Type="Italic">E. globulus</Emphasis> plantations

Young trees were harvested to explore non-destructive methodologies to estimate live branch dry weights in young fast-growing Eucalyptus species under different spacing and fertilizer treatments. Branch growth can vary with silvicultural management such as spacing, fertilizing and thinning, and over relatively short periods in response to environmental conditions. Many published regressions based on standard measurements of height and diameter are site, age and treatment specific. The aim of this study was to improve our capacity to predict woody crown dry weight, based on stem measurements, and to minimize (or eliminate) treatment effects on the resulting model. In young trees, branches are temporary support structures for foliage and are often discarded as the base of the green crown rises. As temporary structures they represent an investment of biomass and nutrient elements, and are subject to selection pressures to maximize the return on investment by the tree. Trees were harvested from existing plantation experiments located in south-eastern Queensland for E. grandis W. Hill ex Maiden (ranging from 0.28 to 15.85 m in height, to 5 years old) and south-western Australia for E. globulus Labill. (0.10–34.4 m in height, to 10.2 years) in order to examine the impact of spacing, nitrogen and phosphorus fertilization on early growth. Relationships to estimate crown woody biomass from non-destructive measurements were developed, and these relationships tended to have different slopes and intercepts for trees with predominantly juvenile foliage and those with intermediate or adult foliage. Dry weight of whole-crown live branch wood (W_branch) was related to heights and/or diameter at breast height (D_BH), but the regressions parameters were different, depending on treatment. The relationships became more generic (i.e. less dependent on treatment effects) between W_branch and stem sectional area at the height of the base of the green crown (SA_CB), consistent with the pipe model theory (R² > 0.91 for the two species for trees with intermediate/adult leaves). However, W_branch was more closely related again to the stem volume above the base of the green crown and treatment effects were not significant (V_Con,gc, R² > 0.93). Branches exit the stem below the green crown, and for E. grandis the best relationship was on stem volume above the lowest live branch (V_Con,llb, R² 0.94). Limited sampling from four other species with similar or contrasting crown characteristics indicated that the relationship could be applied quite generally. Individual E. grandis branch woody dry weight was closely related to the conical volume of the main (first order) branch (V_con,br, R² 0.98₎. The whole crown equivalent, branch woody dry weight plus stem dry weight above the lowest live branch, was also closely related to the stem volume within the woody crown (V_Con,llb, R² 0.97–0.99). While the slope of this relationship was still significantly different between trees with juvenile and intermediate/adult foliage, it had a similar form, suggesting that trees with juvenile foliage allocated a different proportion of their woody biomass within the crown to branches than older trees.     

Reaction wood anatomy and lignin distribution in <Emphasis Type="Italic">Gnetum gnemon</Emphasis> branches

This study investigated the anatomical and chemical characteristics of the reaction wood of a gymnpsperm species, Gnetum gnemon, and discussed on contributing factor for the type of reaction wood in this species. Cell morphology, microfibril angle (MFA) of the S₂ layer and lignin distribution in secondary walls of tracheary elements, and lignin content were examined on three branches. Observations included no G-layer formation, significant decreases in vessel frequency, and altered MFA, and visible-light absorbance after lignin colour reactions in tracheid and fiber tracheid walls on the upper side in almost all samples. These results suggest that reaction wood in G. gnemon was similar to that in ‘tension-wood-like-reaction wood’ in angiosperms. On the other hand, reaction wood showed decrease in the lignin concentration in the fiber tracheid walls compared to the tracheid walls. In addition, the lignin in the tracheid and fiber tracheid walls was originally rich in syringyl units, suggesting that changes in the anatomical and chemical characteristics of secondary xylem due to reaction wood formation might relate to the ratio of the syringyl to guaiacyl units in lignin in the cell walls which function for mechanical support.     

<Emphasis Type="Italic">Ophiostoma</Emphasis> species associated with bark beetles infesting three <Emphasis Type="Italic">Abies</Emphasis> species in Nikko,Japan

Ophiostoma species were isolated from bark beetles and Abies mariesii, A. veitchii and A. homolepis attacked by the beetles in Nikko, Tochigi, central Honshu, Japan. One to two Ophiostoma species were frequently isolated from each species of bark beetle. Ophiostoma subalpinum was the most common associate of Cryphalus montanus. Ophiostoma sp. B as well as O. subalpinum was a common fungus associated with Polygraphus proximus. Ophiostoma europhioides was isolated from Dryocoetes hectographus and D. autographus as one of the common associates. Ophiostoma sp. J and Ophiostoma sp. S were frequently isolated from D. autographus and D. striatus, respectively. These fungi seem to have specific relationships with particular bark beetles. Ophiostoma sp. B, Ophiostoma sp. J and Ophiostoma sp. S have unique morphological characteristics and appear to be new species. Five trees of A. veitchii, approximately 43 years old, were inoculated with five Ophiostoma species to assess the relative virulence of the fungi. Ophiostoma subalpinum, Ophiostoma sp. B, and O. europhioides had relatively higher virulence than the other species studied.     

Radial variations of wood properties of an endangered species, <Emphasis Type="Italic">Pinus armandii</Emphasis> var. <Emphasis Type="Italic">amamiana</Emphasis>

A dead tree of Pinus armandii Franch. var. amamiana (Koidz.) Hatusima (abbreviated to PAAm) was obtained from a natural habitat on Tanega-shima Island and various properties of its wood were investigated. Grain angle was measured and soft X-ray analysis was undertaken to obtain the density in each annual ring. Unit shrinkage and dynamic properties were measured by shrinkage, bending, and compression tests. Variations of wood properties in the radial direction, relationships of wood properties to density, and annual ring width were examined. Roughly speaking, variations in the radial direction of the grain angle, twist angle by drying, Young’s modulus and strength in static bending, absorbed energy in impact bending, compressive Young’s modulus, compressive strength, and compressive proportional limit corresponded to the variation of annual ring width. As a result, it was determined that if PAAm is afforested artificially for the purposes of lumber production and conservation, the annual rings of logs should not be too widely spaced. Wood properties of PAAm were similar to those of Japanese black pine (Pinus thunbergii Parl.), which is another representative pine on Tanegashima Island. This study was presented in part at the 56th Annual Meeting of the Japan Wood Research Society, Hiroshima, August 2007     

Aboveground biomass equations for individual trees of <Emphasis Type="Italic">Cryptomeria japonica</Emphasis>, <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> and <Emphasis Type="Italic">Larix kaempferi</Emphasis> in Japan

Generic equations are proposed for stem, branch and foliage biomass of individual trees in even-aged pure stands of Cryptomeria japonica, Chamaecyparis obtusa and Larix kaempferi. Biomass data was collected from a total of 1,016 individual trees from 247 stands throughout Japan, and five regression models were assessed by root mean square error, mean bias, fit index (FI), and AIC. The results show that a power equation using diameter at breast height (dbh) and height is the most suitable for all species and components. This equation is more accurate than the familiar power equation that uses ‘dbh² height’, and it expresses the greater volume of branch and foliage mass of trees with a lower height/diameter ratio. A power equation using dbh is more reasonable for models with dbh as the only independent variable and more accurate than a power equation using ‘dbh² height’ for estimating branch and foliage mass. Estimating error for branch and foliage mass is larger than that for stem mass, but the entire aboveground biomass can be estimated with an error of less than 19%, except in the case of small trees with dbh less than 10 cm.     

Decay resistance against <Emphasis Type="Italic">Coriolus versicolor</Emphasis> in Sessile oak (<Emphasis Type="Italic"> Quercus petraea </Emphasis>Liebl.): analysis of the between-tree variability and correlations with extractives,tree growth and other basic wood properties

Abstract Weight loss due to fungus Coriolus versicolor has been measured on 614 samples according to the NF EN 113 norm. Up to eight samples were cut at breast height (two opposite radii×four radial positions in heartwood) from 82 mature sessile oaks ( Quercus petraea Liebl.) originating from contrasting regions, silvicultural schedules and site qualities in France. The following points are addressed in the paper: (i) contribution to the total variability for weight loss of the effects tree, position in the tree, as well as their interaction; (ii) percentage of wood samples and trees in each of the five classes of natural durability defined by the norm NF EN 350–2; (iii) test of the effects of region, silvicultural schedule and site quality on weight loss and evaluating their contribution to the total variation; and (iv) correlations at tree level between weight loss and several traits related to tree growth and basic wood properties (density, swelling, grain angle, multiseriate wood rays characteristics, extractives content). The results are discussed with a view to aid the forest manager as well as the log/wood user to take advantage of the high level of between-tree variability observed as natural durability against C. versicolor.     

An inoculation experiment of Japanese <Emphasis Type="Italic">Bursaphelenchus</Emphasis> nematodes on Japanese black and red pine, <Emphasis Type="Italic">Pinus thunbergii</Emphasis> and <Emphasis Type="Italic">P. densiflora</Emphasis>

The pinewood nematode (PWN) Bursaphelenchus xylophilus is an invasive pathogen that was introduced from North America to Asian countries and Portugal and is devastating native pine forests. Some native European and Asian Bursaphelenchus nematodes also have weak to moderate pathogenicity to native pine species. To evaluate the potential risk of native Bursaphelenchus species, we inoculated ten Japanese Bursaphelenchus species into native pine species (the dominant forest species) in Japan, and evaluated their pathogenicity using mortality and tracheal tissue damage as indices. Inoculation was conducted on August 3, 2007, and the symptoms were observed every 2 weeks until February 1, 2008. None of the inoculated trees, excluding the pathogenic PWN inoculated control, showed external disease symptoms; however, four species [a less pathogenic PWN isolate, B. luxuriosae, Bursaphelenchus sp. NK215 (undescribed), and NK224 (undescribed)] caused tracheal tissue damage in inoculated seedlings and showed weak pathogenicity. Therefore, we conclude that there are some potentially pathogenic native species of nematodes distributed in Japan. Interestingly, two of these weakly pathogenic species, B. luxuriosae and NK215, are not associated with Pinaceae trees, suggesting that nematode pathogenicity may be a pre-adaptive character. More experimental studies under different conditions are necessary to accurately evaluate the potential risk of these pathogens.     

Difference between sprouting traits of <Emphasis Type="Italic">Cercidiphyllum japonicum</Emphasis> and <Emphasis Type="Italic">C. magnificum</Emphasis>

Cercidiphyllum japonicum and C. magnificum are deciduous tree species that produce large numbers of sprouts. They are found mainly in riparian and/or disturbed areas. C. japonicum is distributed in the montane zone in Japan, whereas C. magnificum is distributed mostly in the subalpine zone of central Japan. However, the two species sometimes coexist, e.g., on the talus slope at the valley head of the Chichibu Mountains. We investigated differences in sprouting traits in these two species by comparing class distributions of sprout diameter at breast height (DBH) and heights of individuals on the talus slope. Sprout DBH and individual height were smaller in C. magnificum as compared to C. japonicum. Moreover, the analysis of the DBH-class distribution of each species indicated that C. magnificum had numerous small sprouts and experienced high mortality, whereas C. japonicum had fewer small sprouts and low mortality. It is likely that the sprouting traits of C. magnificum make it more adapted to severe conditions in the subalpine zone than those of C. japonicum.