PM 8/6 (1) Betula

Specific scope

The purpose of the EPPO Standard on Betula is to recommend to EPPO Member Governments the phytosanitary measures which they should use or require for Betula plants and plant products moving in international trade to prevent the introduction and spread of quarantine pests. Some of these recommendations are addressed to all EPPO Member Governments, others are addressed only to countries considered to face a certain level of risk from the introduction and spread of the regulated pests concerned. All these recommendations were derived from:

• EPPO Standards PM 1/2 (EPPO A1 and A2 Lists) and the former EPPO Standards PM 2 (pest‐specific phytosanitary measures), or
• Pest Risk Analysis (PRA) carried out or reviewed by EPPO, or
• the Working Party on Phytosanitary Regulations.

For wood packaging material, recommendations are based on ISPM 15 Regulation of wood packaging material in international trade.

Specific approval and amendment

First approved in 2017‐09.     

PM 8/8 (1) Salix

Specific scope

The purpose of the EPPO Standard on Salix is to recommend to EPPO Member Governments the phytosanitary measures which they should use or require for Salix plants and plant products moving in international trade to prevent the introduction and spread of quarantine pests. Some of these recommendations are addressed to all EPPO Member Governments, others are addressed only to countries considered to face a certain level of risk from the introduction and spread of the regulated pests concerned. All these recommendations were derived from:

• EPPO Standards PM 1/2 (EPPO A1 and A2 Lists) and the former EPPO Standards PM 2 (pest‐specific phytosanitary measures), or
• Pest Risk Analysis (PRA) carried out or reviewed by EPPO, or
• the Working Party on Phytosanitary Regulations.

For wood packaging material, recommendations are based on ISPM 15 Regulation of wood packaging material in international trade.

Specific approval and amendment

First approved in September 2017‐09.     

PM 8/4 (1) Castanea

Specific scope

The purpose of the EPPO Standard on Castanea is to recommend to EPPO Member Governments the phytosanitary measures which they should use or require for Castanea plants and plant products moving in international trade to prevent the introduction and spread of quarantine pests. Some of these recommendations are addressed to all EPPO Member Governments, others are addressed only to countries considered to face a certain level of risk from the introduction and spread of the regulated pests concerned. All these recommendations were derived from:

• EPPO Standards PM 1/2 (EPPO A1 and A2 Lists) and the former EPPO Standards PM 2 (pest‐specific phytosanitary measures), or
• Pest Risk Analysis (PRA) carried out or reviewed by EPPO, or
• the Working Party on Phytosanitary Regulations.

For wood packaging material, recommendations are based on ISPM 15 Regulation of wood packaging material in international trade.

Specific approval and amendment

First approved in 2010‐09 as PM 8/3 Quercus and Castanea. Revised and approved as a separate Standard PM 8/4 in 2017‐09     

PM 8/5 (1) Quercus

Specific scope

The purpose of the EPPO Standard on Quercus is to recommend to EPPO Member Governments the phytosanitary measures which they should use or require for Quercus plants and plant products moving in international trade to prevent the introduction and spread of quarantine pests. Some of these recommendations are addressed to all EPPO Member Governments, others are addressed only to countries considered to face a certain level of risk from the introduction and spread of the regulated pests concerned. All these recommendations were derived from:

• EPPO Standards PM 1/2 (EPPO A1 and A2 lists) and the former EPPO Standards PM 2 (pest‐specific phytosanitary measures), or
• Pest Risk Analysis (PRA) carried out or reviewed by EPPO, or
• the Working Party on Phytosanitary Regulations.

For wood packaging material, recommendations are based on ISPM 15 Regulation of wood packaging material in international trade.

Specific approval and amendment

First approved in 2010‐09 as PM 8/3 Quercus and Castanea. Revised and approved as a separate Standard PM 8/5 in 2017‐09     

PM 8/2(1): Coniferae

Specific scope

The purpose of the EPPO Standard on Coniferae is to recommend to EPPO Member Governments the phytosanitary measures, which they should use or require for Coniferae plants and plant products moving in international trade, to prevent the introduction and spread of regulated pests. Certain of these recommendations are addressed to all EPPO Member Governments, others are addressed only to countries considered to face a certain level of risk from the introduction and spread of the pests recommended for regulation concerned. These recommendations are derived:

• • from the EPPO Standards PM 1/2 (EPPO A1 and A2 lists)
• • from the former EPPO standard PM 2 (pest‐specific phytosanitary measures) (which was withdrawn in 2006 by the Working Party on Phytosanitary Regulations)
• • from Pest Risk Analysis
• • from the Working Party on Phytosanitary Regulations
• • from the ISPM n°15 ‘Guidelines for regulating wood packaging material in international trade’.

     

PM 8/3 (1): Quercus and Castanea

Specific scope

The purpose of the EPPO Standard on Quercus and Castanea is to recommend to EPPO Member Governments the phytosanitary measures which they should use or require for Quercus and Castanea plants, and plant products moving in international trade, to prevent the introduction and spread of regulated pests. Certain of these recommendations are addressed to all EPPO Member Governments, others are addressed only to countries considered to face a certain level of risk from the introduction and spread of the regulated pests concerned. All these recommendations are derived:

• ? from the EPPO Standards PM 1/2 (EPPO A1 and A2 lists)
• ? from the former EPPO standard PM 2 (pest‐specific phytosanitary measures) (which was withdrawn in 2006 by the Working Party on Phytosanitary Regulations)
• ? from Pest Risk Analysis
• ? from the Working Party on Phytosanitary Regulations
• ? from the ISPM n°15 ‘Guidelines for regulating wood packaging material in international trade’.

     

PM 8/1 (2) Potato

Specific scope

The purpose of this Standard is to recommend to EPPO Member countries the phytosanitary measures which they should use or require for seed and ware potatoes moving in international trade to prevent the introduction and spread of quarantine pests. Farm‐saved seed is not covered because it is not grown under an official certification scheme and should not be traded. The recommended phytosanitary measures for A1 pests are addressed to all EPPO Member countries and those for A2 pests are aimed at countries where the pest does not occur or is not widely distributed. These recommendations are derived from the phytosanitary measures included in EPPO Standard PM 1/2 (EPPO A1 and A2 Lists), EPPO Standards PM2 (pest‐specific phytosanitary measures, which were withdrawn in 2006) and Pest Risk Analyses (PRAs).

Specific approval and amendment

First approved in 2004‐09. Revised in 2017‐09     

PM 3/72 (2): Elements common to inspection of places of production,area‐wide surveillance,inspection of consignments and lot identification

Specific scope

This standard is intended for use in association with the EPPO Standards series PM 3 on phytosanitary procedures for consignment inspection, inspection of places of production and area‐wide surveillance. It includes elements common to inspection of consignments, places of production and area‐wide surveillance, and lot identification.

Specific approval and amendment

First approved in 2008–09. Revised in 2009–09.

     

PM 3/83 (1) Fragaria plants for planting – inspection of places of production

Specific scope

This Standard describes the procedure for inspection of places of production of Fragaria plants for planting. The Standard includes relevant sampling procedures. The Standard focuses on pests of concern for the EPPO region which are present in the EPPO region. The purposes of a place of production inspection may be for export or for internal ‘within country’ use. Alternatively, inspection may be carried out as part of a national survey for monitoring or to determine country or area freedom for specified pests. The Standard also provides guidance which may be relevant to exports to non‐EPPO countries, in which case the pest lists and requirements for the importing country should be consulted. A procedure for inspecting imported plants from outside the EPPO region is covered in EPPO Standard PM 3/73 Consignment inspection of Fragaria plants for planting (EPPO, 2008).

Specific approval

This Standard was first approved in 2017‐09.     

Format for pest reports

Specific scope

This standard gives guidance to EPPO Member Governments on the main elements of information which should be provided in official pest reports. This harmonized format for pest reports has been designed to remain compatible with the format which is used by FAO to display official pest reports on the IPPC website. Versions in Russian and French are available on the EPPO website ( http://www.eppo.int ).

Specific approval and amendment

First approved in September 2011.     

PM 7/129 (1) DNA barcoding as an identification tool for a number of regulated pests

Specific scope

This Standard describes the use of DNA barcoding protocols in support of the identification of a number of regulated pests and invasive plant species comparing DNA barcode regions with those deposited in publically available sequence databases. 1 It should be used in conjunction with PM 7/76 Use of EPPO diagnostic protocols.

Specific approval and amendment

2016‐09     

Work of the EPPO/IOBC Panel on biological control agents

EPPO started work on biological control agents (BCAs) in 1996, and the joint EPPO/IOBC Panel was established in 1997. The history of the Panel is provided and EPPO Standards developed by the Panel are described. These Standards are: PM 6/1 ‘First import of exotic biological control agents for research under contained conditions’, PM 6/2 ‘Import and release of non‐indigenous biological control agents’ and PM 6/3 ‘List of biological control agents widely used in the EPPO region’. The last of these has been annually updated as a ‘Positive List’ of BCAs for which EPPO recommends its member countries to use a simplified procedure for import and releases. EPPO activities in biological control have been focused on the safety aspects of the introduction of invertebrate BCAs. However, the scope of EPPO's work in this area is now under review, and a number of issues are being considered by the Working Party on Phytosanitary Regulations. These include the remit of the Panel and Standards in relation to micro‐organisms, the evaluation of potential environmental benefits as well as potential risks from releases and the potential for use of BCAs against regulated pests and those recommended for regulation.     

EPPO Study on pest risks associated with the import of tomato fruit

Tomato fruit are currently imported from different parts of the world to the EPPO region, and tomato is an important crop throughout the EPPO region both as an outdoor and indoor crop. The risk that tomato fruit may act as a pathway of introduction of new pests was identified after the introduction of Tuta absoluta in the EPPO region in 2006. A study was launched in 2013, to produce a list of pests associated with the pathway of fruit of Solanum lycopersicum (tomato). The objectives, process and first outcomes of the study are presented here. One main outcome of the study is the recommendation of a general phytosanitary import requirement for a phytosanitary certificate for tomato fruit, thereby ensuring that tomato fruit are inspected at export.     

PM 7/40 (4) Globodera rostochiensis and Globodera pallida

Specific scope

This Standard describes a diagnostic protocol for Globodera rostochiensis and Globodera pallida. 1 Terms used are those in the EPPO Pictorial Glossary of Morphological Terms in Nematology. 2 This Standard should be used in conjunction with PM 7/76 Use of EPPO diagnostic protocols.

Specific approval and amendment

Approved as an EPPO Standard in 2003‐09. Revisions approved in 2009‐09, 2012‐09 and 2017‐02.     

PM 7/89 (2) Heterodera glycines

Specific scope

This Standard describes a diagnostic protocol for Heterodera glycines. 1 This Standard should be used in conjunction with PM 7/76 Use of EPPO diagnostic protocols. Terms used are those in the EPPO Pictorial Glossary of Morphological Terms in Nematology. 2

Specific approval and amendment

Approved in 2008–09. Revision approved in 2017–11.     

Design and analysis of efficacy evaluation trials

Specific scope

This standard is intended for use in association with EPPO Standards of set PP 1 Standards for the efficacy evaluation of plant protection products and provides detailed advice on the design and analysis of efficacy evaluation trials.

Specific approval and amendment

First approved in 1989–09. First revision approved in 1998–09. Second revision approved in 2006–09. Revision mainly to reflect zonal assessment approved in 2012–09.     

PM 7/95 (2): Xiphinema americanum sensu lato

Specific scope

This Standard describes a diagnostic protocol for Xiphinema americanum sensu lato 1 . This Standard should be used in conjunction with PM 7/76 Use of EPPO diagnostic protocols. Terms used are those in the EPPO Pictorial Glossary of Morphological Terms in Nematology 2 .

Specific approval and amendment

Approved in 2009‐09. Revised in 2017‐01. This revision was prepared on the basis of the IPPC Diagnostic Protocol adopted in 2016 (Annex 11 to ISPM 27, IPPC, 2016). This EPPO Diagnostic Standard differs in terms of format but it is consistent with the content of the IPPC Standard. However, since the adoption of the IPPC Protocol 5 new species have been added into the group and are included in this version of the EPPO Protocol.     

PM 7/28 (2) Synchytrium endobioticum

Specific scope

This Standard describes a diagnostic protocol for Synchytrium endobioticum. 1 This Standard should be used in conjunction with PM 7/76 Use of EPPO diagnostic protocols.

Specific approval and amendment

Approved in 2003‐09. Revision approved in 2017‐06.     

PM 7/36 (2) Diabrotica virgifera virgifera

Specific scope

This Standard describes a diagnostic protocol for Diabrotica virgifera virgifera. This Standard should be used in conjunction with PM 7/76 Use of EPPO diagnostic protocols.

Specific approval and amendment

Approved in 2003‐09. Revised in 2017‐02.     

PM 7/128 (1) Xanthomonas axonopodis pv. allii

Specific scope

This Standard describes a diagnostic protocol for Xanthomonas axonopodis pv. allii. 1 This Standard should be used in conjunction with PM 7/76 Use of EPPO diagnostic protocols.

Specific approval and amendment

First approved in 2016‐09.