Identification of an intracellular peptide segment involved in sodium channel inactivation

Antibodies directed against a conserved intracellular segment of the sodium channel alpha subunit slow the inactivation of sodium channels in rat muscle cells. Of four site-directed antibodies tested, only antibodies against the short intracellular segment between homologous transmembrane domains III and IV slowed inactivation, and their effects were blocked by the corresponding peptide antigen. No effects on the voltage dependence of sodium channel activation or of steady-state inactivation were observed, but the rate of onset of the antibody effect and the extent of slowing of inactivation were voltage-dependent. Antibody binding was more rapid at negative potentials, at which sodium channels are not inactivated; antibody-induced slowing of inactivation was greater during depolarizations to more positive membrane potentials. The peptide segment recognized by this antibody appears to participate directly in rapid sodium channel inactivation during large depolarizations and to undergo a conformational change that reduces its accessibility to antibodies as the channel inactivates.     

Biophysical and molecular mechanisms of Shaker potassium channel inactivation

The potassium channels encoded by the Drosophila Shaker gene activate and inactivate rapidly when the membrane potential becomes more positive. Site-directed mutagenesis and single-channel patch-clamp recording were used to explore the molecular transitions that underlie inactivation in Shaker potassium channels expressed in Xenopus oocytes. A region near the amino terminus with an important role in inactivation has now been identified. The results suggest a model where this region forms a cytoplasmic domain that interacts with the open channel to cause inactivation.     

Molecular basis of gating charge immobilization in Shaker potassium channels

Voltage-dependent ion channels respond to changes in the membrane potential by means of charged voltage sensors intrinsic to the channel protein. Changes in transmembrane potential cause movement of these charged residues, which results in conformational changes in the channel. Movements of the charged sensors can be detected as currents known as gating currents. Measurement of the gating currents of the Drosophila Shaker potassium channel indicates that the charge on the voltage sensor of the channels is progressively immobilized by prolonged depolarizations. The charge is not immobilized in a mutant of the channel that lacks inactivation. These results show that the region of the molecule responsible for inactivation interacts, directly or indirectly, with the voltage sensor to prevent the return of the charge to its original position. The gating transitions between closed states of the channel appear not to be independent, suggesting that the channel subunits interact during activation.     

Changes in sodium channel gating produced by point mutations in a cytoplasmic linker

Voltage-gated sodium channels are transmembrane proteins of approximately 2000 amino acids and consist of four homologous domains (I through IV). In current topographical models, domains III and IV are linked by a highly conserved cytoplasmic sequence of amino acids. Disruptions of the III-IV linker by cleavage or antibody binding slow inactivation, the depolarization-induced closed state characteristic of sodium channels. This linker might be the positively charged "ball" that is thought to cause inactivation by occluding the open channel. Therefore, groups of two or three contiguous lysines were neutralized or a glutamate was substituted for an arginine in the III-IV linker of type III rat brain sodium channels. In all cases, inactivation occurred more rapidly rather than more slowly, contrary to predictions. Furthermore, activation was delayed in the arginine to glutamate mutation. Hence, the III-IV linker does not simply act as a charged blocker of the channel but instead influences all aspects of sodium channel gating.     

Structure of the cytoplasmic beta subunit-T1 assembly of voltage-dependent K+ channels

The structure of the cytoplasmic assembly of voltage-dependent K+ channels was solved by x-ray crystallography at 2.1 angstrom resolution. The assembly includes the cytoplasmic (T1) domain of the integral membrane alpha subunit together with the oxidoreductase beta subunit in a fourfold symmetric T1(4)beta4 complex. An electrophysiological assay showed that this complex is oriented with four T1 domains facing the transmembrane pore and four beta subunits facing the cytoplasm. The transmembrane pore communicates with the cytoplasm through lateral, negatively charged openings above the T1(4)beta4 complex. The inactivation peptides of voltage-dependent K(+) channels reach their site of action by entering these openings.     

Synthetic amphiphilic peptide models for protein ion channels

Ion channel proteins are important for the conduction of ions across biological membranes. Recent analyses of their sequences have suggested that they are composed of bundles of alpha-helices that associate to form ion-conducting channels. To gain insight into the mechanisms by which alpha-helices can aggregate and conduct ions, three model peptides containing only leucine and serine residues were synthesized and characterized. A 21-residue peptide, H2N-(Leu-Ser-Ser-Leu-Leu-Ser-Leu)3-CONH2, which was designed to be a membrane-spanning amphiphilic alpha-helix, formed well-defined ion channels with ion permeability and lifetime characteristics resembling the acetylcholine receptor. In contrast, a 14-residue version of this peptide, which was too short to span the phospolipid bilayer as an alpha-helix, failed to form discrete, stable channels. A third peptide, H2N-(Leu-Ser-Leu-Leu-Leu-Ser-Leu)3-CONH2, in which one serine per heptad repeat was replaced by leucine, produced proton-selective channels. Computer graphics and energy minimization were used to create molecular models that were consistent with the observed properties of the channels.     

Calmodulin activation of calcium-dependent sodium channels in excised membrane patches of Paramecium

Calmodulin is a calcium-binding protein that participates in the transduction of calcium signals. The electric phenotypes of calmodulin mutants of Paramecium have suggested that the protein may regulate some calcium-dependent ion channels. Calcium-dependent sodium single channels in excised patches of the plasma membrane from Paramecium were identified, and their activity was shown to decrease after brief exposure to submicromolar concentrations of calcium. Channel activity was restored to these inactivated patches by adding calmodulin that was isolated from Paramecium to the cytoplasmic surface. This restoration of channel activity did not require adenosine triphosphate and therefore, probably resulted from direct binding of calmodulin, either to the sodium channel itself or to a channel regulator that was associated with the patch membrane.     

Crystal structure of a mammalian voltage-dependent Shaker family K+ channel

Voltage-dependent potassium ion (K+) channels (Kv channels) conduct K+ ions across the cell membrane in response to changes in the membrane voltage, thereby regulating neuronal excitability by modulating the shape and frequency of action potentials. Here we report the crystal structure, at a resolution of 2.9 angstroms, of a mammalian Kv channel, Kv1.2, which is a member of the Shaker K+ channel family. This structure is in complex with an oxido-reductase beta subunit of the kind that can regulate mammalian Kv channels in their native cell environment. The activation gate of the pore is open. Large side portals communicate between the pore and the cytoplasm. Electrostatic properties of the side portals and positions of the T1 domain and beta subunit are consistent with electrophysiological studies of inactivation gating and with the possibility of K+ channel regulation by the beta subunit.     

Inactivation and block of calcium channels by photo-released Ca2+ in dorsal root ganglion neurons

Calcium channels are inactivated by voltage and intracellular calcium. To study the kinetics and the mechanism of calcium-induced inactivation of calcium channels, a "caged" calcium compound, dimethoxy-nitrophen was used to photo-release about 50 microM calcium ion within 0.2 millisecond in dorsal root ganglion neurons. When divalent cations were the charge carriers, intracellular photo-release of calcium inactivated the calcium channel with an invariant rate [time constant (tau) approximately equal to 7 milliseconds]. When the monovalent cation sodium was the charge carrier, photorelease of calcium inside or outside of the cell blocked the channel rapidly (tau approximately equal to 0.4 millisecond), but the block was greater from the external side. Thus the kinetics of calcium-induced calcium channel inactivation depends on the valency of the permeant cation. The data imply that calcium channels exist in either of two conformational states, the calcium- and sodium-permeant forms, or, alternatively, calcium-induced inactivation occurs at a site closely associated with the internal permeating site.     

Bacteriophage M13 procoat protein inserts into the plasma membrane as a loop structure

The major coat protein of bacteriophage M13 is synthesized as a precursor, the procoat, with a typical leader (signal) sequence of 23 residues at its NH2-terminus. A fusion protein that contains the NH2-terminal 141 residues of cytoplasmic ribulokinase and all but the first ten residues of M13 procoat was made. The fusion protein inserts into the plasma membrane of Escherichia coli and is processed by leader peptidase to give rise to a leader peptide of 155 residues and the mature coat protein of 50 residues. The NH2-terminus of the leader peptide remains in the cytoplasm and is protected from protease added to the medium outside of the cell. This indicates that M13 procoat inserts into the membrane as a loop structure and that the NH2-terminus of a leader peptide remains within the cytoplasm during membrane insertion.     

Identification of an alpha subunit of dihydropyridine-sensitive brain calcium channels

Voltage-sensitive calcium channels in different tissues have diverse functional properties. Polyclonal antibodies (PAC-2) against the alpha subunits of purified rabbit skeletal muscle calcium channels immunoprecipitated calcium channels labeled with the dihydropyridine PN200-110 from both skeletal muscle and brain. The immunoreactivity of PAC-2 with the skeletal muscle channel was greater than that with the brain calcium channel and was absorbed only partially by prior treatment with the brain channel. PAC-2 specifically recognized a large peptide in synaptic plasma membranes of rabbit brain with an apparent molecular size of 169,000 daltons. This protein resembles an alpha subunit of the skeletal muscle calcium channel in apparent molecular weight, antigenic properties, and electrophoretic behavior after reduction of disulfide bonds. Thus, the dihydropyridine-sensitive calcium channel of rabbit brain has an alpha subunit that is homologous, but not identical, to those of the skeletal muscle calcium channel. The different functional properties of these two calcium channels may result from minor variations in structurally similar components.     

Single-channel and genetic analyses reveal two distinct A-type potassium channels in Drosophila

Whole-cell and single-channel voltage-clamp techniques were used to identify and characterize the channels underlying the fast transient potassium current (A current) in cultured myotubes and neurons of Drosophila. The myotube (A1) and neuronal (A2) channels are distinct, differing in conductance, voltage dependence, and gating kinetics. The myotube currents have a faster and more voltage-dependent macroscopic inactivation rate, a larger steady-state component, and a less negative steady-state inactivation curve than the neuronal currents. The myotube channels have a conductance of 12 to 16 picosiemens, whereas the neuronal channels have a conductance of 5 to 8 picosiemens. In addition, the myotube channel is affected by Shaker mutations, whereas the neuronal channel is not. Together, these data suggest that the two channels are separate molecular structures, the expression of which is controlled, at least in part, by different genes.     

Functional properties of rat brain sodium channels expressed in a somatic cell line

Transfection of Chinese hamster ovary cells with complementary DNA encoding the RIIA sodium channel alpha subunit from rat brain led to expression of functional sodium channels with the rapid, voltage-dependent activation and inactivation characteristic of sodium channels in brain neurons. The sodium currents mediated by these transfected channels were inhibited by tetrodotoxin, persistently activated by veratridine, and prolonged by Leiurus alpha-scorpion toxin, indicating that neurotoxin receptor sites 1 through 3 were present in functional form. The RIIA sodium channel alpha subunit cDNA alone is sufficient for stable expression of functional sodium channels with the expected kinetic and pharmacological properties in mammalian somatic cells.     

斑点叉尾鮰hepcidin抗菌肽在大肠杆菌中的融合表达

通过RT-PCR从斑点叉尾鮰肝脏中克隆编码hepcidin原前体肽的基因"pIH"。与参考序列相比,显示两个氨基酸残基的变异。通过对编码hepcidin原前体肽的基因添加EcoR I和HindⅢ酶切位点,选择含"trxA"融合头的pET32a(+)作为表达质粒、E.coliBL21(DE3)作为工程菌,成功构建"pET32a-pIH"原核表达系统。阳性克隆经1 mmol.L-1IPTG诱导、在37℃培养12 h后,表达的"trxA-pIH"融合蛋白70%以上可溶。Tricine-SDS-PAGE分析表明,细胞经超声破碎后的上清通过固化金属离子亲和层析(IMAC)纯化后,可获得高纯度的目的蛋白。     

Functional conversion between A-type and delayed rectifier K+ channels by membrane lipids

Voltage-gated potassium (Kv) channels control action potential repolarization, interspike membrane potential, and action potential frequency in excitable cells. It is thought that the combinatorial association between distinct alpha and beta subunits determines whether Kv channels function as non-inactivating delayed rectifiers or as rapidly inactivating A-type channels. We show that membrane lipids can convert A-type channels into delayed rectifiers and vice versa. Phosphoinositides remove N-type inactivation from A-type channels by immobilizing the inactivation domains. Conversely, arachidonic acid and its amide anandamide endow delayed rectifiers with rapid voltage-dependent inactivation. The bidirectional control of Kv channel gating by lipids may provide a mechanism for the dynamic regulation of electrical signaling in the nervous system.     

Protein kinase activity closely associated with a reconstituted calcium-activated potassium channel.

Modulation of the activity of potassium and other ion channels is an essential feature of nervous system function. The open probability of a large conductance Ca(2+)-activated K+ channel from rat brain, incorporated into planar lipid bilayers, is increased by the addition of adenosine triphosphate (ATP) to the cytoplasmic side of the channel. This modulation takes place without the addition of protein kinase, requires Mg2+, and is mimicked by an ATP analog that serves as a substrate for protein kinases but not by a nonhydrolyzable ATP analog. Addition of protein phosphatase 1 reverses the modulation by MgATP. Thus, there may be an endogenous protein kinase activity firmly associated with this K+ channel. Some ion channels may exist in a complex that contains regulatory protein kinases and phosphatases.     

Calcium and sodium channels in spontaneously contracting vascular muscle cells

Electrophysiological recordings of inward currents from whole cells showed that vascular muscle cells have one type of sodium channel and two types of calcium channels. One of the calcium channels, the transient calcium channel, was activated by small depolarizations but then rapidly inactivated. It was equally permeable to calcium and barium and was blocked by cadmium, but not by tetrodotoxin. The other type, the sustained calcium channel, was activated by larger depolarizations, but inactivated very little; it was more permeable to barium than calcium. The sustained calcium channel was more sensitive to block by cadmium than the transient channel, but also was not blocked by tetrodotoxin. The sodium channel inactivated 15 times more rapidly than the transient calcium channel and at more negative voltages. This sodium channel, which is unusual because it is only blocked by a very high (60 microM) tetrodotoxin concentration but not by cadmium, is the first to be characterized in vascular muscle, and together with the two calcium channels, provides a basis for different patterns of excitation in vascular muscles.     

Adenylyl cyclase amino acid sequence: possible channel- or transporter-like structure

Complementary DNA's that encode an adenylyl cyclase were isolated from a bovine brain library. Most of the deduced amino acid sequence of 1134 residues is divisible into two alternating sets of hydrophobic and hydrophilic domains. Each of the two large hydrophobic domains appears to contain six transmembrane spans. Each of the two large hydrophilic domains contains a sequence that is homologous to a single cytoplasmic domain of several guanylyl cyclases; these sequences may represent nucleotide binding sites. An unexpected topographical resemblance between adenylyl cyclase and various plasma membrane channels and transporters was observed. This structural complexity suggests possible, unappreciated functions for this important enzyme.     

朱砂叶螨谷氨酸门控氯离子通道GluCl1基因的克隆与序列特征分析

朱砂叶螨是一种分布广泛、危害极大、难以防治和易产生抗性的农业害螨。为了研究朱砂叶螨杀螨剂神经靶标谷氨酸门控氯离子通道,进一步确定阿维菌素对朱砂叶螨的抗性机理,采用同源基因克隆以及RACE技术,克隆朱砂叶螨杀螨剂靶标谷氨酸门控氯离子通道(GluCl1)基因全长,分析其序列特征。结果表明,GluCl1基因序列全长为1856 bp,其中开放阅读框(ORF)为1338 bp,编码455个氨基酸,N端含25个氨基酸的信号肽,有4个跨膜结构域,GenBank登陆号为KC543353。同源比对分析表明,朱砂叶螨与其他蜱螨目GluCl基因有高度的同源性,特别与二斑叶螨的相似度最高。研究还发现朱砂叶螨敏感品系GluCl1第3个跨膜区的G314,与二斑叶螨敏感品系相应位点的氨基酸G323一致,而二斑叶螨抗性品系相应位点突变为D323。本研究进一步证实了G323突变为D323和二斑叶螨对阿维菌素产生抗性有关。本研究为今后建立以朱砂叶螨谷氨酸门控氯离子通道为靶点的选择性杀螨剂体外筛选体系奠定坚实基础。     

Resolution of a signal transfer region from a general binding domain in gbeta for stimulation of phospholipase C-beta2

Signaling by guanine nucleotide-binding proteins (G proteins) involves sequential protein-protein interactions. G protein-betagamma subunit (Gbetagamma) interactions with phospholipase C-beta2 (PLC-beta2) were studied to determine if all Gbeta contacts are required for signaling. A peptide encoding Gbeta amino acid residues 86 to 105 stimulated PLC-beta2. Six residues (96 to 101) within this sequence could transfer signals and thus constitute a core signal transfer region. Another peptide, encoding Gbeta amino acid residues 115 to 135, did not substantially stimulate PLC-beta2 by itself but inhibited Gbetagamma stimulation, indicating that residues 115 to 135 constitute a general binding domain. Resolution of signal transfer regions from general binding domains indicates that all protein-protein contacts are not required for signal transfer and that it may be feasible to synthesize agonists and antagonists that regulate intracellular signal flow.