Cesium absorption through bark of Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

Absorption of radiocesium (¹³⁷Cs and ¹³⁴Cs) through bark, and its subsequent translocation into wood and needles, has been suggested as a potential source of tree contamination, but the process is not well understood. Field experiments were conducted to confirm whether Cs could enter a Japanese cedar tree through the bark and how Cs moves within a tree. Stable Cs (¹³³Cs) was applied to the bark at 1.2-m height on 10- and 26-year-old Japanese cedars. The ¹³³Cs concentrations were determined in the bark, sapwood, and heartwood (for 26-year-old cedar only) of stem disks from several heights, as well as in current-year needles from the canopy. The ¹³³Cs concentrations were considerably higher in the sapwood and heartwood of stem disks from 1.2-m height in treated trees than in untreated trees, suggesting that ¹³³Cs penetrated the bark to enter the wood. The average ¹³³Cs concentrations were higher in the heartwood than the sapwood, indicating ¹³³Cs accumulation in the heartwood. High ¹³³Cs concentrations in the needles of treated trees implied acropetal movement of ¹³³Cs to actively growing organs. Our results demonstrate that Cs can enter Japanese cedar trees through the bark and that Cs is transported radially to the heartwood and vertically to the apex.     

Feeding responses of the western dry-wood termite <Emphasis Type="Italic">Incisitermes minor</Emphasis> (Hagen) (Isoptera: Kalotermitidae) against ten commercial timbers

Five Japanese timbers, four timbers from the USA, and one Malaysian timber were evaluated for their resistance to the invasive dry-wood termite Incisitermes minor (Hagen) using laboratory choice and no-choice feeding tests with holed specimens. The highest survival rates of I. minor in both the heartwood and sapwood no-choice feeding tests were more than 70% after 3 months. When offered sapwood and heartwood choice feeding tests and the combined choice feeding tests, the highest survival rates of I. minor were more than 75% after 3 months. With regards to the percentage of wood mass losses in the no-choice and choice feeding tests, karamatsu (Larix leptolepsis), buna (Fagus crenata), and Douglas fir (Pseudotsuga menziesii) were classified as “resistant” species among the ten sapwood specimens. In the heartwood no-choice and choice feeding tests, the resistant species were buna, karamatsu, Douglas fir, sugi (Cryptomeria japonica), akamatsu (Pinus densiflora), and western red cedar (Thuja plicata). The ranking of the resistance of the ten commercial timbers against I. minor was buna > karamatsu > sugi > western red cedar > Douglas fir > rubber > western hemlock > hinoki > spruce.     

Evaluation of dried-wood odors: comparison between analytical and sensory data on odors from dried sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) wood

The emissions of volatile organic compounds from air-dried, conventionally dried, and high-temperaturedried sugi wood were compared by gas chromatographymass spectrometry. Terpenes were clearly the main compound group in the air-dried wood samples, whereas acetic acid was only detected in the high-temperature-dried wood samples, indicating that considerable changes occurred in the volatile compound emission profile during hightemperature processing. The most abundant compounds in the air-dried wood and conventionally dried wood were δ-cadinene, α-muurolene, and β-cadinene (sesquiterpenes) for all specimens, and a-pinene and D-limonene (monoterpenes) for conventionally dried wood and air-dried wood. In contrast, acetic acid was detected only in the hightemperature-dried wood. Sensory evaluation of volatile organic compounds was performed by 18 male university students. Volatile compounds of air-dried wood and conventionally dried wood were assessed as being significantly more soothing than those from high-temperature-dried wood. This study was presented in part at the 57th Annual Meeting of the Japan Wood Research Society, Hiroshima, August 2007     

Spectrophotometric assay of a wood preservative, didecyldimethylammonium chloride (DDAC), in aqueous solution

A spectrophotometric assay based on the color reaction between didecyldimethylammonium chloride (DDAC) and 4-[4-(dipropylamino)phenylazo]-benzenesulfonic acid (propyl orange) was used for the determination of DDAC as a wood preservative. The assay was carried out using a propyl orange solution at pH 2.9. The visible absorbance spectrum of propyl orange showed an absorbance maximum at 510 nm, which decreased continuously with increasing DDAC concentration from 0 to 20 ppm. A linear correlation was observed at a DDAC concentration lower than 8 ppm. To apply this assay method to determine DDAC retention in treated wood, the influence of wood extractives on the assay was investigated. Wood extractives from sapwood and heartwood of Japanese cedar, Hinoki cypress, Japanese larch, and Western hemlock showed no influence on DDAC determination except in the case of heartwood from Japanese cedar and Hinoki cypress, which gave apparent DDAC concentrations higher than the actual values. However, it was also found that absorbance measurement at 477 nm solved this overestimation and gave precise values. It was concluded that this assay is a viable alternative to the current methods for DDAC determination.     

The sporicidal activity of yellow‐cedar heartwood,essential oil and wood constituents towards Phytophthora ramorum in culture

In this paper, we demonstrate that 140 mg/kg of essential oil from the wood of yellow‐cedar, incense cedar, Port‐Orford‐cedar or western juniper strongly inhibits zoospore germination and hyphal growth of Phytophthora ramorum in culture. Four individual compounds in yellow‐cedar heartwood were also tested. Zoospore germination was reduced to 0% with 10, 100 and 1000 mg/kg of nootkatin, carvacrol and valencene, respectively. Nootkatone was the least active compound, with 3.5% zoospore germination at 1000 mg/kg. Sporangia germination was 0% with 500 mg/kg of nootkatin or carvacrol. The disruption of the zoospore outer membrane and the loss of sporangial contents were often observed and indicative of sporicidal activity. Hyphal growth was inhibited by 99.9% with 50 mg/kg of nootkatin or 500 mg/kg of carvacrol, but growth resumed upon removing the inhibitors. The zoosporicidal activity of yellow‐cedar heartwood shavings stored dry for approximately 10 years was consistent with the quantity of extractable compounds they contained. Thus, spreading fresh shavings or chips of yellow‐cedar heartwood with appreciable higher concentrations of the active compounds, over areas in infection zones where spores might be difficult to control such as trails and parking lots used by hikers and bicyclists, might be useful as part of an integrated program to minimize P. ramorum spore distribution.     

Effects of high temperature kiln drying on the practical performances of Japanese cedar wood (Cryptomeria japonica) II: Changes in mechanical properties due to heating

Japanese cedar wood specimens were steamed at 80°, 100°, and 120°C over 14 days, and their equilibrium moisture content (M) at 20°C and 60% relative humidity, longitudinal dynamic Young’s modulus (E), bending strength (σ _max), and breaking strain (ε _max) were compared with those of unheated specimens. Steaming for a longer duration at a higher temperature resulted in a greater reduction in M, σ _max, and ε _max. The E of wood was slightly enhanced by steaming at 100°C for 1–4 days and 120°C for 1–2 days, and thereafter it decreased. The slight increase in the E of sapwood was attributable to the reduction in hygroscopicity, while sufficient explanation was not given for a greater increase in the heartwood stiffness. Irrespective of the steaming temperature, the correlations between M and the mechanical properties of steamed wood were expressed in terms of simple curves. M values above 8% indicated a slight reduction in E and s max, whereas M values below 8% indicated a marked decrease in the mechanical performances. In addition, the e max decreased almost linearly with a decrease in the value of M. These results suggest that hygroscopicity measurement enables the evaluation of degradation in the mechanical performances of wood caused by steaming at high temperatures.     

Radial movement of sapwood-injected rubidium into heartwood of Japanese cedar (<Emphasis Type="Italic">Cryptomeria</Emphasis><Emphasis Type="Italic">japonica</Emphasis>) in the growing period

Rubidium solution was injected in the sapwood of a Japanese cedar cultivar in the growing period, and its radial movement in stem was traced to investigate the accumulation of alkali metals in the heartwood. Sapwood-injected Rb was detected in outer heartwood at 10 days after the treatment, and continued increasing at 20 days after. Radial movement of Rb toward heartwood was considered to occur soon after the treatment, and to decline at a certain point of the time after Rb injection ceased. However, Rb continued moving in heartwood probably by diffusion even after the cease of Rb injection. In a series of injection experiment, radial movement of injected Rb is not corresponding to the seasonality of both cambial activity and cytological changes of ray parenchyma accompanied with heartwood formation. From the results on Rb’s behavior, we conclude that accumulation of K and other alkali metals in heartwood of Japanese cedar has two steps, active transport from sapwood to outer heartwood via ray, and diffusion in heartwood, and that these processes proceed independently from both cambial activity and cytological changes of ray parenchyma.     

3种不同处理方法对木材渗透性影响的研究

本文通过对长白鱼鳞云杉和臭冷杉生材分别进行普通气干处理和酒精置换处理以及对其气干材进行水浸处理,研究了这３种不同处理方法对木材气渗透性的影响及其影响机理。研究结果表明,长白鱼鳞云杉边材、心材和臭冷杉心村的生材经普通气干处理后,其气体渗透性较低,分别约为０．１１４、０．０４５和０．１１１ｄａｒｃｙ;长白鱼鳞云杉边材、心材和臭冷杉心材的生材经酒精置换处理后,其气体渗透性分别约为１１．７１３、０．０７４和０．１４４ｄａｒｃｙ,比普通气干处理对照组试样的平均渗透性分别增加约１０１．５倍、６２％和３０％,ｔ检验表明,前者差异非常显著,但后两者差异不显著;已气干１８个月的长白鱼鳞云杉边材、心材和臭冷杉心材经水浸处理后,其平均气体浸透性较处理前分别增加约８５％、４９％、６５．５％,ｔ检验表明差异均显著。长白鱼鳞云杉生材边材经     

Radial distribution of thujaplicins in old growth and second growth western red cedar (Thuja plicata Donn)

Summary Radial distribution of thujaplicins in western red cedar (Thuja plicata Donn) trees of varying ages was studied in order to assess relative decay resistance of their wood. Samples were extracted with ethanol: benzene (1: 2), and the extractives were analyzed for thujaplicin codtent by a new method utilizing capillary gas chromatography of their methylated derivatives. The combined concentration of thujic acid and methyl thujate was also determined for each sample. Distribution of extractives, thujaplicins and thujic acid, generally increased from pith to outside heartwood, then decreased in the sapwood. Maximum extractive and thujaplicin contents were also related to tree age. This suggests that products made from the wood of younger trees will be less resistant to decay than similar products made from the wood of old trees.     

Blackening of Diospyros genus xylem in connection with boron content

The amount of boron contained in the xylem of Japanese persimmon (Diospyros kaki Thunb.) and ebony (Diospyros ebenum Koen) was determined by inductively coupled plasma (ICP) emission spectrometry and a modified curcumin–acetic acid method. The boron content was compared between the heartwood and sapwood of ebony as well as between a blackened portion (“kurogaki”) and normal portion of Japanese persimmon. The kurogaki contained a higher level of boron than the normal portion of the same individual, although the boron content varied among individuals. Moreover, the boron content of the heartwood of ebony was much higher than that of the sapwood. These results suggest the participation of boron in the blackening of Japanese persimmon. Because both kurogaki and heartwood of ebony are durable to fungal attack, the blackening of Diospyros genus appears to be related to the formation of defensive substances in which boron seems to take part. The convenient curcumin–acetic acid method is an alternative to the ICP method with comparable accuracy.     

Chemical emissions from adhesive-bonded wood products at elevated temperatures

Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) was employed to examine the chemical emissions from the glued wood samples at elevated temperatures (150, 200, 250, 300, 350, 400, 450, and 500°C). Two wood species, Douglas-fir (Pseudotsuga menziesii) and southern pine (Pinus palustris), one structural adhesive, phenol–resorcinol–formaldehyde (PRF), PRF-bonded Douglas-fir, and PRF-bonded southern pine were evaluated. The volatile compounds with a mass range of 35–300 m/z emitted from the pyrolysis samples were separated by gas chromatography (GC) and identified by mass spectrometry (MS). The results indicated that compared to neat wood and resin film samples, several additional pyrolysis products were observed for the PRF-bonded wood samples including (1) acetaldehyde and butanedial for PRF-bonded Douglas-fir and (2) acetaldehyde, furfural, 2-furanmethanol, butanedial, 2,3-butanedione, cyclopropyl carbinol, 1,2-benzenediol, and 1-(acetyloxy)-2-propanone for PRF-bonded southern pine. These additional compounds were possibly associated with the interaction between wood and PRF resin. The results also indicated that bonded wood products would be less thermally stable than those of neat wood and PRF resin samples.     

Genetic and environmental variation in wood properties of <Emphasis Type="Italic">Acacia melanoxylon</Emphasis>

Context  

Australian blackwood (Acacia melanoxylon), is a fast-growing, high-quality, appearance-grade timber species native to eastern Australia. Some of its key wood properties are percentage heartwood, heartwood colour, basic density, wood stiffness and green moisture content. Variation in these properties affects log value, processing and marketing.     

Relations Between Permeability and Structure of Wood

The permeability and the structure of heartwood and sapwood of the solvent-exchange dried and the air-dried green-wood of Chinese-fir(Cunninghamia lanceolata(Lamb.)Hook.)and masson pine(Pinus massoniana Lamb.) were measured in order to study the relations between the permeability and the structure.The results showed that the permeability of sapwood of both the air-dried and the solvent-exchange dried wood was higher than that of heartwood,and the permeability of the solvent-exchanged a bigger number of flow path per unit area of the wood perpendicular to the flow direction resulted from a bigger number of unaspirated pits per unit area and a bigger number of effective pit openings per membrane,and on the other hand,a smaller number of tracheid in series connection per unit length parallel to flow direction resulted from a longer tracheid longth and an effective tracheid length for permeability.     

Effects of moisture in wood materials on the SNR of GPS signals

This study was performed to investigate the factors responsible for the reduction in the signal-to-noise ratio (SNR) of a global positioning system (GPS) when used in a forest. We investigated the relationship between the SNR values of GPS signals and the moisture in wood materials and clarified this relationship through experimentation and simulation. Although the wood material itself had a minimal effect on SNR reduction, moisture in the wood had an obvious effect. It is noteworthy that wood material with a moisture resistance quantity (Mw) of 2 g/cm² caused a reduction of more than ~10 dB in the SNR. This Mw value corresponds to Japanese cedar with a green stem thickness of ~7 cm. Under unobstructed sky conditions, SNR is less than ~20 dB, so a reduction of 10 dB has a marked effect on GPS reception. The reduced SNR under canopies resulted from moisture in stems and the canopy. Furthermore, a simulation performed in a Japanese cedar forest revealed that 77.8% of the SNR reduction was caused by stems, 8.1% by branches, and 14.1% by needles.     

Compressive deformation of wood impregnated with low molecular weight phenol formaldehyde (PF) resin IV: Species dependency

Flat-sawn specimens of eight wood species, albizia (Paraserianthes falkata, 0.23 g/cm³), Japanese cedar (Cryptomeria japonica, 0.31 g/cm³), red lauan (Shorea sp., 0.36 g/cm³), European spruce (Picea abies, 0.44 g/cm³), Douglas fir (Pseudotsuga douglasii, 0.50 g/cm³), elm (Ulmus sp., 0.51 g/cm³), Japanese beech (Fagus crenata, 0.64 g/cm³), and Japanese birch (Betula maximowicziana, 0.71 g/cm³), were impregnated with low molecular weight phenol-formaldehyde (PF) resin and their compressive deformations were compared. The volume gain (VG) and weight gain due to 20% resin solution impregnation were different among species. Furthermore, the specific volume gain (VG/specific gravity), indicating the degree of swelling of the cell wall, also varied from 17.7% for European spruce to 26.4% for elm. Oven-dried specimens of each species were compressed using hot plates fixed to an Instron testing machine. The deformation behavior of resin-impregnated wood up to 10MPa was significantly different among the species. Stress development during cell wall collapse for low density wood was minimal. As a consequence, a significant increment of density occurred up to 2MPa for low density wood such as albizia and Japanese cedar. When PF resin-impregnated wood was compressed up to 2MPa and the pressure was kept constant for 30min, the density of Japanese cedar reached 1.18g/cm³, about 30% higher than the density of compressed Japanese birch, which possesses an original density that is 2.5 times higher than that of Japanese cedar. The mechanical properties of resin-impregnated wood, especially low density wood, increased with density. Hence, it is manifested that low density wood species have an advantage as raw materials for obtaining high-strength wood at low pressing pressure.     

Dimensional stabilization of wood treated with furfuryl alcohol catalysed by borates

Furfuryl alcohol has a sufficiently small molecular size, which allows impregnation into wood and can be polymerized in the cell walls. Polymerization can be accomplished using a catalyst, heat or penetrating radiation. This research illustrates a natural wood polymer composite (NWPC) that was obtained under the catalytic effect of borates. Furfuryl alcohol (FA) and borates were mixed at different ratios before treatment. When borates alone are used, they were totally leached from wood after cyclic leaching periods. However, this was not encountered with the mixture of furfuryl alcohol and borates. Furfuryl alcohol considerably improved antiswelling efficiency by about 85% for both Japanese cedar ( Cryptomeria japonica) and Scots pine ( Pinus sylvestris L.) wood specimens. Results of the leaching tests of borate indicated that boric acid readily lost its boron content in the early cycles of the leaching periods and the highest leaching rate of boron was observed at the first leaching cycle (512 ppm). When furfuryl alcohol mixed with borates, boron was released to the leaching water at slower amounts, suggesting the possibility of longer protection of treated wood in service.     

Application of activable tracers to investigate radial movement of minerals in the stem of Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>)

Two activable tracers, Rb and Eu, were injected into the sapwood of Japanese cedars (Cryptomeria japonica D. Don) to investigate the radial movement of minerals in their stems in the resting period. Eight trees of four cultivars, two of which genetically form wet heartwood, were treated near the end of the growing period. At 40 days after the treatment, Rb was detected in the outer heartwood, whereas Eu was not. Radial movement of Rb was more rapid in trees with wet heartwood than in those with normal heartwood. At 204 days after the treatment, more Rb was detected in the heartwood than was found on the first sampling, whereas no Eu was detected in the heartwood. The difference in radial movement between Rb and Eu was considered mainly to be the result of selective transport of beneficial minerals by Japanese cedar. The difference in the rate of radial movement of Rb between wet and normal heartwood became more conspicuous at 204 days after treatment. We concluded that the movement of Rb from the sapwood to the outer heartwood was by active transport through the rays, whereas that in the heartwood was by diffusion due to the gradient of Rb concentration.     

Comparison of the decomposition behaviors of hardwood and softwood in supercritical methanol

 The chemical conversion of Japanese beech (Fagus crenata Blume) and Japanese cedar (Cryptomeria japonica D. Don) woods in supercritical methanol was studied using the supercritical fluid biomass conversion system with a batch-type reaction vessel. Under conditions of 270°C/27 MPa, beech wood was decomposed and liquefied to a greater extent than cedar wood, and the difference observed was thought to originate mainly from differences in the intrinsic properties of the lignin structures of hardwood and softwood. However, such a difference was not observed at 350°C/43 MPa, and more than 90% of both beech and cedar woods were effectively decomposed and liquefied after 30 min of treatment. This result indicates that the supercritical methanol treatment is expected to be an efficient tool for converting the woody biomass to lower-molecular-weight products, such as liquid fuels and useful chemicals. Received: December 19, 2001 / Accepted: March 15, 2002 Acknowledgments This research has been done under the research program for the development of technologies for establishing an eco-system based on recycling in rural villages for the twenty-first century from the Ministry of Agriculture, Forestry and Fisheries, Japan and by a Grant-in-Aid for Scientific Research (B)(2) (no.12460144, 2001.4–2003.3) from the Ministry of Education, Culture, Sports, Science and Technology, Japan. This study was presented in part at the 45th Lignin Symposium, Ehime, Japan, October 2000 and the 51st Annual Meeting of the Japan Wood Research Society, Tokyo, Japan, April 2001. Correspondence to:S. Saka     

Wood properties of juvenile and mature heartwood in Robinia pseudoacacia L.

The aim of this study is to characterise the properties of juvenile and mature heartwood of black locust (Robinia pseudoacacia L.). Content, composition and the subcellular distribution of heartwood extractives were studied in 14 old-growth trees from forest sites in Germany and Hungary as well as in 16 younger trees of four clone types. Heartwood extractives (methanol and acetone extraction) were analysed by HPLC-chromatography. UV microspectrophotometry was used to topochemically localise the extractives in the cell walls. The natural durability of the juvenile and mature heartwood was analysed according to the European standard EN 350-1. Growth as well as chemical analyses showed that, based on extractives content, the formation of juvenile wood in black locust is restricted to the first 10–20 years of cambial growth. In mature heartwood, high contents of phenolic compounds and flavonoids were present, localised in high concentrations in the cell walls and cell lumen of axial parenchyma and vessels. In juvenile wood, the content of these extractives is significantly lower. Juvenile wood had a correspondingly lower resistance to decay by Coniophora puteana (brown rot fungus) and Coriolus versicolor (white rot fungus) than mature heartwood.     

A study of the effects of stems and canopies on the signal to noise ratio of GPS signals

This study investigated the relationship between the quantity of the shielding effect by wood material and the lowering of the signal to noise ratio (SNR) of global positioning system (GPS), signals. Three types of wood materials, namely, Japanese cedar board (JCB), Japanese cedar needle (JCN), and deciduous broadleaf (DBL), were prepared. We performed analysis by quantification I to clarify the factors that affect SNR. Approximately 60% of SNR could be explained by wood resistance quantity (Wrq) and satellite elevation angle SEA. The order of the factors that effect SNR was SEA > Wrq > experimental date > type of wood material > permeation distance through wood material (Dwm). We could formulate the relationship between Wrq and SNR. The Monte Carlo simulation was used to confirm the relationship between SNR and Wrq. The results of the positioning fix ratio by the simulation showed an excessive value in the coniferous forest that almost corresponded with that of the deciduous broad-leaved forest.