Novel one bath application of oil and water repellent finish with environment friendly cross-linker for cotton

The performance of the fluorocarbon based acrylate polymer, Genguard, was evaluated on cotton fabric. Genguard treated fabric exhibited good oil and water repellency rating before washing. However, rating was lost immediately after washing. In order to enhance the washing durability of the Genguard finish, citric acid was incorporated into the recipe as a formaldehyde free cross-linker. The combination of citric acid with fluorocarbon exhibited good improvement in the durability of the oil and water repellency rating after multiple washings. In addition, fabric treated with this novel combination demonstrated excellent increase in the easy care performance. Scanning electron microscope (SEM) was used to examine the surface of the fabric treated with Genguard and citric acid as a cross-linker.     

Durable multifunctional properties on acrylic fabric using nano TiO2 and polysiloxane

Producing fabric with multifunctional properties has been recently a center of research and utilizing nanoparticles is an efficient approach to gain this purpose. Here, nano TiO₂ photo catalyst and polysiloxane softener were utilized as stabilizer on the acrylic fabric to obtain soft handle, hydrophilic, and self-cleaning features on the fabric. The effect of various concentrations of nano TiO₂ and polysiloxane on the fabric handle, water droplet absorption time, and self-cleaning properties of the fabric has been mathematically modeled based on the response surface methodology (RSM). The optimized treatment conditions indicated that treated acrylic fabric with 2.19 % polysiloxane and 0.68 % nano TiO₂ produced the rigidity of 26.8 g.cm, water absorption time of 15.8 s and self-cleaning of ΔE _T *=18.1. Also increasing the concentration of polysiloxane enhanced both wettability and photoactive properties of nano TiO₂ treated acrylic fabrics. Further, the nano TiO₂/polysiloxane treated acrylic fabrics is significantly enable to absorb the light with wavelength lower than 400 nm and improve discoloration of C.I. Reactive Yellow 1.     

In situ loading TiO<Subscript>2</Subscript> and its photocatalysis and UV resistance on cotton fabric

Anatase TiO₂ nanoparticles was in-situ formed on the cotton fabric by using tetrabutyl titanate (TBT) as a precursor through the normal pressure hydrothermal method. X-ray diffraction (XRD), Scanning electron microscopy (SEM), UV visible spectra (UV-VIS), ATR-IR were used as the characterization techniques. Photocatalytic performance of TiO₂ on the fabric surface was evaluated by methylene blue (MB), 4 kinds of the common living stains and three dyes under ultraviolet and visible light radiation. XRD analysis found that the TiO₂ loaded on the fabric was mainly anatase crystalline phase with particle size of 6.4 nm. SEM observed that a large number of nano TiO₂ particles are distributed on the fabric surface. UV-VIS test indicated that theTiO₂-coated fabric possessed an obvious absorption for ultraviolet. ATR-IR analysis indicated that the nano-TiO₂ possesses a strong affinity with the hydroxyl group of the cotton fabric, and the soaping tests showed that the TiO₂ was firmly bonded with the fabrics. The treated fabrics have good degradation ability for MB aqueous solution, and could degrade azo, anthraquinone and phthalocyanine dyes. The order of degradation of the common life stains was: pepper oil> tea > coffee > soy sauce.     

Investigation on the effect of titanium dioxide nano particles on camouflage properties of cotton fabrics

Cotton fabrics were dyed with three commercial vat dyes in order to provide camouflage in Vis-NIR regions and imitate reflectance profile of greenish leaves. To investigate the effect of nano particles on camouflage properties of dyed fabric, nano particles of TiO₂ were applied on dyed fabrics using pad-dry-cure method. The nano TiO₂ padded dyed fabrics were investigated using scanning electron microscopy (SEM). Reflectance curves of coated dyed samples with different concentrations of nano TiO₂ were measured. Results showed that in both of the standard shades, nano TiO₂ increases the reflectance value in NIR region and with increasing the concentration of nano TiO₂, the reflectance curves of samples tend to show the maximum reflection of greenish leaves (deciduous leaves) in NIR region. Chromatic values (CIE1976 L*, a*, and b*) and color difference (according to CIECMC color difference ΔE*cmc (2:1)) of each of the coated samples were measured using the reflection spectrophotometer. By considering the influence of white color of nano TiO₂ on green shade of dyed cotton fabrics and increasing the color difference (between coated samples and the standard shades of the 1948 U.S army pattern) in visible range, optimum concentrations of nano TiO₂ for development of camouflage properties on cotton fabrics in both NIR and visible region were determined. These values for NATO and forest green shades were 0.75 % and 0.5 %, respectively. Fastness results showed that both of the samples have acceptable color fastness. The effect of washing and exposure to light on camouflage properties of coated dyed fabrics in visible (in term of chromatic values) and NIR region (in term of spectral reflectance) was investigated when those were coated in optimum concentrations of nano TiO₂. The results showed that the effect of after treatments (washing and exposure to light) on surface color spectral characteristics and camouflage properties was inconsiderable.     

Self-cleaning Properties of Nylon 6 Fabrics Treated with Corona and TiO<Subscript>2</Subscript> Nanoparticles under Both Ultraviolet and Daylight Irradiations

Nylon 6 fabric with self-cleaning properties was prepared by corona discharge pre-treatment and coating with TiO₂ nanoparticles (NPs) using pad-dry-cure technique. The self-cleaning property was studied by discoloration of methylene blue (MB), ketchup, tea and coffee stains from the corona+TiO₂ treated nylon-6 fabric. Color difference (ΔΕ*), reflectance (R) and K/S of MB stain were investigated by diffuse reflectance spectrophotometry. The MB stain was almost completely removed from the corona+TiO₂ treated nylon surface after 24 h under UV light/daylight irradiation. Both of these phenomena (corona and TiO₂) led to an increase in the discoloration of stains under UV and daylight irradiations. The EDS analysis showed an increase in the concentration of deposited TiO₂ NPs coating after corona treatment. The FE-SEM images revealed that the surface of nylon 6 was coarser after the corona treatment. Also, the FE-SEM micrographs exhibited that a uniform layer of TiO₂ NPs was formed on the corona treated nylon fabric. The corona+TiO₂ treated nylon illustrated antibacterial activity against E. coli and B. subtillis microorganisms. The EDS and FE-SEM analysis confirmed that after 5 washing cycles, the amount of TiO₂ NPs was higher on the surface of corona+TiO₂ treated nylon than that of the fabric only treated with TiO₂ without corona pretreatment. This result justifies that the corona+TiO₂ treated nylon fabric with appropriate self-cleaning property can be applied cost-effectively in the textile industry.     

Preparation and property of TiO2/SiO2 multilayer film on the fabric by sol-gel process

The high light reflection of multilayer TiO₂/SiO₂ film was prepared on the fabric by the sol-gel process. The size of titania and silica particles in hydrosol was analyzed by Nanosizer, and the morphology of TiO₂/SiO₂ multilayer film on the fabric was characterized by SEM. The reflection spectra of the samples were tested accordingly, and it showed that the reflection of the fabric coated by multilayer film was higher than that of the monolayer film. Moreover, the reflection increased with the increase of layer number. For sunlight fastness testing, the fabric color changed less with the increase of layer number, which showed the multilayer film on the fabric can improve the light resistance of the fabric. The mechanical property, the bending property and air permeability testing results showed that there was little change for the coated fabric compared with the original fabric.     

Effect of nano SrTiO3 supporting nano TiO2 on self-cleaning of cotton fabric

This study reports the results of an investigation aiming at finding what affect nano titania (TiO₂) and nano strontium titanate (SrTiO₃) on self-cleaning of cotton fabrics. The photocatalytic activity of nano strontium titanate has been examined on cotton fabric under UV irradiation in various concentrations in mixing of nano titania. The amount of loaded nano titania and nano strontium titanate particles on cotton fabrics were investigated using X-ray fluorescence spectrometry (XRF) and crystallinity of coatings by X-ray diffraction spectroscopy (XRD). The treated cotton fabrics, which were stained with two common synthesized dyes, were exposed to 400 W UV radiation for 30 hours and their self-cleaning property was investigated by a reflectance spectrophotometer. Scanning electron microscope (SEM) images show pervasion of nano materials on the surface of the treated cotton. Adding nano strontium titanate to nano titania showed the most promising photocatalytic activity toward dye degradation.     

Preparation of the silk fabric with ultraviolet protection and yellowing resistance using TiO2/La(III) composite nanoparticles

In order to develop ultraviolet protection and yellowing resistance silk fabric, the silk fabric was treated with dispersive TiO₂/La(III) composite solution. The morphology, microstructure, ultraviolet protection and whiteness of the treated silk fabric were characterized by means of transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectra, X-ray diffraction and ultraviolet transmittance. Furthermore, the mechanism of the ultraviolet protection was investigated. The results show that the TiO₂/La(III) composite particles disperse uniformly. The TiO₂/La(III) particles can not only be treated onto the surface of the silk fabric but also can be treated into the interior of the silk fabric successfully. The result of Fourier transform infrared spectra and X-ray diffraction demonstrates that there are hydrogen bonds between the silk fabric and composite particles, and crystallinity of the treated silk fabric decrease when compares to the untreated silk fabric. The ultraviolet protection factor of the TiO₂/La (III) treated silk fabric is significantly higher than that of the untreated silk fabric. The main ultraviolet shielding effect of TiO₂ treated silk fabric is absorption. The La(III) treated SF has a bad ultraviolet shielding effect, but it has a certain reflection and absorption.     

Sound absorption properties of spiral vane electrospun PVA/nano particle nanofiber membrane and non-woven composite material

In this research, we fabricated a series of PVA membranes loaded with 0 wt.%, 1 wt.%, 3 wt.%, 5 wt.% ZrC and 0 wt.%, 1 wt.%, 3 wt.%, 5 wt.% TiO₂ using a spiral vane electrospun machine respectively. There were 2 sizes of TiO₂ nano particles: 10 nm and 200 nm. We tested sound absorption properties of needle-punched nonwovens as well as the composite of nano membranes and needle-punched nonwovens by an impedance tube at the frequency range from 500 Hz to 6500 Hz. Besides, we tested morphological characterization of nano membranes by scanning electron microscope (SEM) and crystalline properties by X-ray diffraction (XRD). We investigated the sound absorption properties of composites as well as the effect of ZrC, TiO₂, nano particle sizes and cavity depth on sound absorption properties. Results showed that sound absorption properties of composites increased at the whole range of frequency compared to those of needle-punched nonwovens. When loaded with ZrC nano particles, sound absorption properties of composite shifted to a higher frequency region, and with increasing content of ZrC, sound absorption properties were better above 2500 Hz. However, when loaded with TiO₂, sound absorption properties were better at lower frequency. With 3 wt.% TiO₂, sound absorption coefficient reached the best at the frequency range from 500 Hz to 1500 Hz. Besides, 200 nm TiO₂ was more conductive to the increase of sound absorption properties at lower frequency region compared to 10 nm TiO₂. Sound absorption properties of composites with air back cavity shifted to a lower frequency region, too. SEM showed that there was nano particle aggregation when loaded TiO₂ nano particles. XRD showed that ZrC nano particles loaded in PVA nano fiber retained their crystalline structure while TiO₂ didn’t. It appeared from the results that nano particles had an effect on sound absorption materials, with different kinds and different sizes, sound absorption properties will improve in different ranges of frequency     

Multifunctional polyester fabric using a multicomponent treatment

In this study, multifunctional polyester fabrics with the features of self-cleaning, water and stain repellency, and thermal stability were prepared utilizing a multicomponent system. To this end, both unmodified and alkaline-hydrolyzed modified fabrics were treated with nano TiO₂/citric or maleic acid/sodium hypophosphite/polysiloxane and triethanolamine via a pad-dry-cure method. Surface morphology and color variation of the samples were studied utilizing field emission scanning electron microscopy (FESEM) and CIE-Lab system, respectively. Also, energy-dispersive X-ray (EDX) analysis indicated the content of Ti, P and Si on the surface of fabrics. Thermal stability of the specimen was scrutinized through thermal gravimetric analysis (TGA) and char yield. Both hydrolysis treatment and silicone softener increased the uptake of the nanoparticles. Also, in a comparison between the utilized carboxylic acids, citric acid demonstrated superior features. Generally, the treated fabrics showed desirable self-cleaning and stain repellency with some enhanced thermal stability.     

Nano titanium dioxide on wool keratin as UV absorber stabilized by butane tetra carboxylic acid (BTCA): A statistical prospect

Photo yellowing of wool is one of the most important problems which have negative impacts on various aspects of wool prompting scientists to find a solution over the past decades. In this research the protective features of nano-titanium dioxide particles against UV on wool fabric were discussed and the color variations of wool samples after UV irradiation were measured and reported. It was shown that nano TiO₂ is a suitable UV absorber and its effect depends on the concentration. Also, it was assumed that butane tetracarboxylic acid plays a prominent role as a cross-linking agent to stabilize the nano-titanium dioxide as well as a polyanion to maintain negative charges on the wool surface for higher nano particles absorption. Also the variables conditions were optimized using response surface methodology (RSM).     

Experimental study on dyeing technical PET yarns having different TiO<Subscript>2</Subscript> contents

TiO₂ contents in yarns can influence color yield so that dyeing quality of industrial poly ethylene terephthalate (PET) yarns can be improved through the adjustment of TiO₂ contents. To evaluate the dyeing performance of color yield, the chips which included the different TiO₂ contents of 330, 550, and 1,100 ppm respectively were used to produce the yarns of different TiO₂ content by a spin-draft machine. The physical and structural properties of the yarns were measured to investigate effect of the TiO₂ contents on them. Dye uptake and dyeing rate were also evaluated using a colorimeter to compare the yarns having different TiO₂ contents. The experimental results showed that there were no appreciable variation in physical and structural properties among the yarn samples and no difference were observed among the dyed fabric samples with regard to dyeing uptake and dyeing rate. However, the color yield of dyed fabrics increased as TiO₂ contents decreased in the yarns especially when the fabric samples were dyed to pale shade. The physical reasoning could be proposed on why the yarns having low TiO₂ contents appeared to have higher color yield after dyeing.     

Biomechanical mechanism of fabric softness discrimination

“Softness” is one of the primitive terms describing the physical and sensory attributes of fabric, however, the information for its physiological mechanism compared to statistical physical factors of fabric softness is scarce. To explain the biomechanical and the potential neurophysiological phenomenon for exploring fabric softness, a finger-fabric finite element model is used to conduct an active contact simulation analysis. The effects of surface friction index and compression modulus of fabric on softness discrimination are investigated. The interests of the study are in the contributions of these fabric variables to the changing contact area, interfacial friction shear stress and contact pressure distributions, which are significant cognitive variables or stimulus parameters in peripheral neural levels documented by prior observations. The mechanistic data for fingerpad-fabric interaction indicate that the basis for the perception of softness of flexible and bulk fabric is likely on the spatial variation of the pressure and shear stress on the skin resulting from the surface friction index and compression property of fabric. These conclusions suggest that devices for the haptic rendering of fabric softness, based on vibration result from surface roughness, is not sufficient to perceive the soft-touch feel of fabric as a result of the cues with lack information for the changing contact area by touch.     

Silver(I) ions loaded cyclodextrin-grafted-cotton fabric with excellent antimicrobial property

In this study cyclodextrin (CD) has been grafted onto cellulose back-bone of cotton fabric using citric acid as crosslinker. The CD-grafted fabric was characterized by SEM and FTIR analysis. The percent grafting of CD on fabric has been found to increase with concentration of CD, citric acid, and sodium dihydrogen phosphate. The CD-grafted fabric has been loaded with silver(I) ions for the purpose of obtaining a slow release device. The Ag(I) loaded grafted fabric showed fair antibacterial properties against E. Coli. The release of Ag(I) ions from the CD-grafted fabric was observed for a period of seven days.     

Immobilization of TiO2 nanoparticles on PET fabric modified with silane coupling agent by low temperature hydrothermal method

PET fabric was first modified with silane coupling agent KH-560, and then was loaded with a layer of nano-scaled TiO₂ particles using tetrabutyl titanate as precursor by low temperature hydrothermal method, followed by dyeing with Disperse Blue 56. The morphology, crystalline phase, chemical modification, thermal stability and optical property of PET fiber before and after treatments were studied by scanning electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy, thermal gravimetric and diffuse reflectance spectrum techniques. The properties of tensile, air permeability, luster, ultraviolet (UV) protection, photocatalytic activity, K/S value and color fastness were also measured. It was found that compared with the TiO₂-coated fabric without modification with KH-560, the loading of TiO₂ nanoparticles on the surface of the TiO₂-coated fabric modified with KH-560 was obviously improved. The pure anatase TiO₂ nanoparticle was grafted onto the fiber surface. The onset decomposition temperature increased. The absorbing capability to ultraviolet radiation was enhanced. The properties of tensile, air permeability, luster, K/S value and color fastness changed slightly. The UV protection ability and photodegradation of methyl orange under UV illumination were enhanced to some extent.     

A Novel Green Stabilization of TiO<Subscript>2</Subscript> Nanoparticles onto Cotton

Facile embedding of TiO₂ nanoparticles onto cotton fabric has been successfully attained by ultraviolet light irradiations. The adhesion of nanoparticles with fibre surface, tensile behaviour and physicochemical changes before and after ultraviolet treatment were investigated by scanning electron microscopy, energy dispersive X-ray and inductive couple plasma-atomic emission spectroscopy. Experimental variables i.e. dosage of TiO₂ nanoparticles, temperature of the system and time of ultraviolet irradiations were optimised by central composite design and response surface methodology. Moreover, two different mathematical models were developed for incorporated TiO₂ onto cotton and tensile strength of cotton after ultraviolet treatment and used further to testify the obtained results. Self-clean fabric through a synergistic combination of cotton with highly photo active TiO₂ nanoparticles was produced. Stability against ultraviolet irradiations and self-cleaning properties of the produced fabric were evaluated.     

Multifunctional modification of wool fabric using graphene/TiO<Subscript>2</Subscript> nanocomposite

In this study, a new finishing technique is introduced through treatment of wool fabric with graphene/TiO₂ nanocomposite. Graphene oxide/titanium dioxide nanocomposite first applied on the wool fabric by hydrolysis of titanium isopropoxide in graphene oxide suspension and then this coating chemically converted by sodium hydrosulfite to graphene/TiO₂ nanocomposite. The homogenous distribution of the graphene/TiO₂ nanocomposite on the fiber surface was confirmed by field emission scanning electron microscopy (FE-SEM), Energy-dispersive X-ray spectroscopy (EDS) and X-ray mapping. X-ray diffraction patterns proved the presence of titanium dioxide nanoparticles with a crystal size of 127 Å on the treated wool fabric. Also, the defect analysis based on X-ray photoelectron spectroscopy (XPS) established the composition of the nanocomposite. Other characteristics of treated fabrics such as antibacterial activity, photo-catalytic self-cleaning, electrical resistivity, ultraviolet (UV) blocking activity and cytotoxicity were also assessed. The treated wool fabrics possess significant antibacterial activity and photo-catalytic self-cleaning property by degradation of methylene blue under sunlight irradiation. Moreover, this process has no negative effect on cytotoxicity of the treated fabric even reduces electrical resistivity and improves UV blocking activity.     

Functionalization of lyocell fibers with TiO2, SiO2, and GLYMO

In the research self-cleaning coatings based on photocatalytically active nano titanium dioxide (TiO₂) were prepared. When applied directly to cellulose fiber surfaces, TiO₂ coatings form weak bonds with fibers. Therefore 3-glycidooxypropyl-trimethoxysilane was used as a coupling agent. It had been applied on the surface of cellulose fibers before the TiO₂ coating was performed. In this case, the silane is in the interface region, where it can be most effective as an adhesion promoter. Silane coupling agents have unique chemical and physical properties not only to enhance bond strength, but more importantly to prevent de-bonding at the interface during composite aging and use as well. The coupling agent provides a stable bond between two otherwise poorly bonding surfaces. Surface properties of these coatings have been examined, such as surface morphology and surface microstructure. TiO₂ nanoparticles were irreversibly attached to the surface of monodisperse silica (SiO₂) spheres and to the surface of Lyocell fibers coated with an epoxy-containing silane coupling agent. Analysis using scanning electron microscopy showed uniform distribution of nanoparticles in the resulting coatings. Fourier transform infrared spectroscopy revealed changes in the surface microstructure occurring after different modifications. In addition, the influence of photocatalytic activity on the mechanical properties of Lyocell fibers was determined. In addition to that, the results indicated that SiO₂ and the coupling agent provide a protection against high oxidizing power of TiO₂ under exposure to daylight irradiation.     

Improvement of ink-jet printing performances using β-cyclodextrin forming inclusion complex on cotton fabric

Cotton fabric was modified with β-cyclodextrin (β-CD) forming inclusion complex to yield color strength, pattern sharpness, and color fastness for ink-jet printing. The modified cotton fabric was confirmed with the presence of new strong absorption peaks around 1713 cm^-1 and 1243 cm^-1 in FT-IR. β-CD had been covalently grafted on cotton fabric via the esterification reaction of citric acid (CTR) with cellulose and β-CD. The results indicated that printing performances of the ink-jet printed fabric were enhanced through β-CD modification. The K/S value was enhanced from 4.21 to 6.72, the width of printed line was decreased from 1.48 mm to 1.25 mm, and the color fastness was improved to 3-4 level. These improvements were due to the truncated cone structure of β-CD, which can form inclusions with water-based pigment. Meanwhile, the crease recovery performance was also improved with the aid of CTR. A comparison between the unmodified and modified cotton fabric suggested that the crease recovery angle of β-CD modified cotton fabric was increased by 25.0 % in the warp direction. Therefore, printing performance and crease recovery performance of β-CD modified and water-based pigment printed cotton fabric were enhanced remarkably.     

Effect of concentration of titanium dioxide acting as catalyst or co-catalyst on the wrinkle-resistant finishing of cotton fabric

The wrinkle-resistant property of cotton specimens treated by 1,2,3,4-butanetetracarboxylic acid (BTCA) and catalysed by sodium hypophosphite (SHP) in the presence of TiO₂ or nano-TiO₂ has been evaluated in the present study. In this study, Scanning Electron Microscopy proved the presence of TiO₂ or nano-TiO₂ on the fibre surface. It was also found that 0.1–0.2 % TiO₂ or nano-TiO₂ was the optimum concentration to enhance the wrinkle-resistance of BTCA-SHP-treated cotton fabrics. In addition, the TiO₂ or nano-TiO₂ added in the wrinkle-resistant treatment could act as a multi-functional finishing agent to improve the UV protection property while they are safe to human skin as proved by the cytotoxicity test. Therefore, TiO₂ or nano-TiO₂ was evident that they could enhance the finishing performance and minimise the side effect.