Viscoelastic properties of waxy and nonwaxy rice flours, their fat and protein-free starch, and the microstructure of their cooked kernels

Physicochemistry and structural studies of two types of japonica rice, low amylose Calmochi-101 (CM101) and intermediate amylose M-202 (M202), were conducted to determine similarities and differences between the rices perhaps attributable to amylose content differences. The rheological behavior of the gelation and pasting processes of flours and starches was determined with high accuracy and precision using a controlled stress rheometer. Fat and protein, although minor constituents of milled rice, were shown to have significant effects on the physicochemical and pasting properties of starches and flours. Removal of protein and lipids with aqueous alkaline or detergent solutions caused lower pasting temperatures and higher overall viscosity in both starches, compared with their respective flours. There was less viscosity difference between M202 flour and its starch when isolated by enzymatic hydrolysis of protein. The protease did not reduce internally bound lipids, suggesting that fats help to determine pasting properties of rice flours and their respective starches. Structural integrity differences in individual granules of waxy and nonwaxy rice flours, starches, and whole raw, soaked, and cooked milled grain were revealed by fracture analysis and scanning electron microscopy. Calmochi 101 and M202 did not differ in weight-averaged molar mass (Mw) and root-mean-square radii (Rz) between flours and starches, as determined by high-performance size exclusion chromatography (HPSEC) and multiple-angle laser light scattering (MALLS) (Park, I.; Ibanez, A. M.; Shoemaker, C. F. Starch 2007, 59, 69-77).     

Investigation of Digestibility In Vitro and Physicochemical Properties of A‐ and B‐Type Starch from Soft and Hard Wheat Flour

In this study, the functional properties of A‐ and B‐type wheat starch granules from two commercial wheat flours were investigated for digestibility in vitro, chemical composition (e.g., amylose, protein, and ash content), gelatinization, retrogradation, and pasting properties. The branch chain length and chain length distribution of these A‐ and B‐type wheat starch granules were also determined using high‐performance anion exchange chromatography (HPAEC). Wheat starches with different granular sizes not only had different degrees of enzymatic hydrolysis and thermal and pasting properties, but also different molecular characteristics. Different amylose content, protein content, and branch chain length of amylopectin in A‐ and B‐type wheat starch granules could also be the major factors besides granular size for different digestibility and other functional properties of starch. The data indicate that different wheat cultivars with different proportion of A‐ and B‐type granular starch could result in different digestibility in wheat products.     

Effect of Dry Heating on Physicochemical Properties of Pregelatinized Rice Starch

Japonica and indica rice starches (10% w/w) were pregelatinized in a boiling water bath for 5 or 10 min and subsequently heat‐treated in a dry state for 0, 1, 2, or 3 h at 130°C to examine the effects of dry heating on pasting viscosity, paste clarity, thermal properties, X‐ray diffraction pattern, and gel strength of pregelatinized starches. Heat treatment obviously changed the physicochemical properties of pregelatinized rice starch. The pregelatinized rice starches had higher peak viscosity and final viscosity than the corresponding native rice starches. Heat treatment of pregelatinized rice starch for 1 h increased the peak viscosity, but treatment for 2 or 3 h decreased the peak viscosity compared with the unheated pregelatinized rice starch. The indica rice starch exhibited more substantial changes in pasting viscosity than did japonica rice starch during heat treatment. The melting enthalpy of the endothermic peak occurred at 90–110°C, and the intensity of the X‐ray diffraction peak at 20° was increased by dry heating, possibly owing to the enhanced amylose‐lipid complexes. The dry heat treatment of pregelatinized starch caused an increase in paste clarity and a decrease in gel strength.     

Fine structures and physicochemical properties of starches from chalky and translucent rice kernels

This work compared the molecular structures and physicochemical properties of starches obtained from chalky and translucent kernels of six rice cultivars. Starch samples were prepared according to a modified alkali steeping method. Crystallinity, pasting characteristics, and thermal properties were studied by X-ray diffraction, rapid viscosity analysis, and differential scanning calorimetry, respectively. Starch molecular size fractions (amylopectin, amylose, and intermediate material) were estimated by high-performance size exclusion chromatography, and the chain length profiles of isoamylase-debranched amylopectin were evaluated by high-performance anion-exchange chromatography with pulsed amperometric detection. Starches from chalky kernels contained less amylose (more amylopectin) and more short branch-chain amylopectin (less long branch-chain amylopectin) compared with the translucent kernel starches. Differences in starch structural features significantly correlated with observed variation in grain translucency, starch X-ray diffraction patterns, thermal properties, and pasting characteristics. Starch synthesis in chalky kernels may slightly favor glucan chain branching over chain elongation.     

Properties of Flours and Starches as Affected by Rough Rice Drying Regime

Flours and starches from rough rice dried using different treatment combinations of air temperature (T) and relative humidity (RH) were studied to better understand the effect of drying regime on rice functionality. Rough rice from cultivars Bengal and Cypress were dried to a moisture content of ≈12% by three drying regimes: low temperature (T 20°C, RH 50%), medium temperature (T 40°C, RH 12%), and high temperature (T 60, RH 17%). Head rice grains were processed into flour and starch and evaluated for pasting characteristics with a Brabender Viscoamylograph, thermal properties with differential scanning calorimetry, starch molecular‐size distribution with high‐performance size‐exclusion chromatography (HPSEC), and amylopectin chain‐length distribution with high‐performance anion‐exchange chromatography with pulsed amperometric detection (HPAEC‐PAD). Lower head rice and starch yields were obtained from the batch dried at 60°C which were accompanied by an increase in total soluble solids and total carbohydrates in the pooled alkaline supernatant and wash water used in extracting the starch. Drying regime caused no apparent changes on starch molecular‐size distribution and amylopectin chain‐length distribution. Starch fine structure differences were due to cultivar. The pasting properties of flour were affected by the drying treatments while those of starch were not, suggesting that the grain components removed in the isolation of starch by alkaline‐steeping were important to the observed drying‐related changes in rice functionality.     

Relationship Between Physicochemical Properties of Starches and White Salted Noodle Quality in Japanese Wheat Flours

This study describes the effect of starch properties of Japanese wheat flours on the quality of white salted noodles (WSN). Starch was isolated from 24 flours of 17 Japanese cultivars and amylose content was determined along with pasting properties by Rapid Visco Analyser (RVA), thermal properties by differential scanning calorimetry (DSC), and the distribution of amylopectin chain length by high‐performance anion exchange chromatography (HPAEC). Twenty flours were used to prepare WSN. As expected, 5–6% lower amylose content was associated with good WSN quality (higher scores in softness, elasticity, and smoothness). RVA analysis indicated that the pasting temperature had the greatest influence on WSN quality, while breakdown and setback showed slight effects on WSN quality. DSC results showed that lower endothermal enthalpy (ΔH) in the amylose‐lipid complex was associated with good WSN quality. Chainlength distribution of amylopectin by HPAEC was not an important factor in relation to WSN quality.     

Structures and physicochemical properties of six wild rice starches

Starches from six wild rice cultivars were studied for their chemical structures and physicochemical properties and compared with a long-grain rice starch. The six wild rice starches were similar in morphological appearance, X-ray diffraction patterns, swelling power, and water solubility index but different in amylose content, beta-amylolysis limit, branch chain length distribution, thermal properties, and pasting properties. The structure of the wild rice amylopectins was close to that of waxy rice amylopectin with more branching and a larger proportion of short branch chains of degree of polymerization 6-12 as compared with that of amylopectin from rice starch with a similar amylose content. The differences in branch chain length distribution of amylopectin and amylose content were assumed to contribute to the differences in physicochemical properties among the six wild rice starches as well as to the differences between the wild rice starches and the rice starch.     

Properties of Starches from Near‐Isogenic Wheat Lines with Different Wx Protein Deficiencies

To determine the effect of amylose content on the starch properties, the amylose content, pasting properties, swelling power, enzymatic digestibility, and thermal properties of partial and perfect waxy types along with their wild‐type parent were analyzed. As expected, amylose content decreases differently in response to the loss of each Wx gene, showing the least response to Wx‐A1a. Most of the characteristics, except the thermal properties of the amylose‐lipid complex in differential scanning calorimetry (DSC), differed significantly among the tested types. Furthermore, the breakdown, setback, and pasting temperatures from the Rapid Visco Analyser (RVA) and the enzymatic digestibility, swelling power, peak temperature, and enthalpy of starch gelatinization from DSC showed a correlation with the amylose content. The relationships between the peak viscosity from the RVA and the onset temperature of starch gelatinization determined by DSC with amylose content of the tested materials were not clear. Waxy starch, which has no amylose, showed a contrasting behavior in starch gelatinization compared with nonwaxy starches. Among the nonwaxy starches, lower setback, lower pasting temperature, higher enzyme digestibility, higher peak temperature, higher enthalpy of starch gelatinization, and higher swelling were generally associated with low amylose starches.     

Effect of Amylose Content on Gelatinization,Retrogradation, and Pasting Properties of Starches from Waxy and Nonwaxy Wheat and Their F1 Seeds

We studied the effect of amylose content on the gelatinization, retrogradation, and pasting properties of starch using wheat starches differing in amylose content. Starches were isolated from waxy and nonwaxy wheat and reciprocal F1 seeds by crossing waxy and nonwaxy wheat. Mixing waxy and nonwaxy wheat starch produced a mixed starch with the same amylose content as F1 seeds for comparison. The amylose content of F1 seeds ranged between waxy and nonwaxy wheat. Nonwaxy‐waxy wheat had a higher amylose content than waxy‐nonwaxy wheat. Endothermic enthalpy and final gelatinization temperature measured by differential scanning calorimetry correlated negatively with amylose content. Gelatinization onset and peak temperature clearly differed between F1 and mixed starches with the same amylose content as F1 starches. Enthalpy for melting recrystallized starches correlated negatively with amylose content. Rapid Visco Analyser measurement showed that F1 starches had a higher peak viscosity than waxy and nonwaxy wheat starches. Mixed starches showed characteristic profiles with two low peaks. Setback and final viscosity correlated highly with amylose content. Some of gelatinization and pasting properties differed between F1 starches and mixed starches.     

Significance of Amylose Content of Wheat Starch on Processing and Textural Properties of Instant Noodles

The effect of amylose content of starch on processing and textural properties of instant noodles was determined using waxy, partial waxy, and regular wheat flours and reconstituted flours with starches of various amylose content (3.0–26.5). Optimum water absorption of instant noodle dough increased with the decrease of amylose content. Instant noodles prepared from waxy and reconstituted wheat flours with ≤12.4% amylose content exhibited thicker strands and higher free lipids content than wheat flours with ≥17.1% amylose content. Instant noodles of ≤12.4% amylose content of starch exhibited numerous bubbles on the surface and stuck together during frying. Lightness of instant noodles increased from 77.3 to 81.4 with the increase of amylose content of starch in reconstituted flours. Cooking time of instant noodles was 4.0–8.0 min in wheat flours and 6.0–12.0 min in reconstituted flours, and constantly increased with the increase in amylose content of starch. Hardness of cooked instant noodles positively correlated with amylose content of starch. Reconstituted flours with ≤12.4% amylose content of starch were higher in cohesiveness than those of wheat flours of wild‐type and partial waxy starches and reconstituted flours with ≥17.1% amylose content. Instant fried noodles prepared from double null partial waxy wheat flour exhibited shorter cooking time, softer texture, and higher fat absorption (1.2%) but similar color and appearance compared with noodles prepared from wheat flour of wild‐type starch.     

Properties of Starches from Several Low‐Amylose Rice Cultivars

The starch properties of five low‐amylose rice cultivars, Yawarakomachi, Soft 158, Hanabusa, Aya, and Snow Pearl, were compared with those of two normal amylose rice cultivars, Nipponbare and Hinohikari. There were no large differences in the distributions of the amylopectin chain length determined by high‐performance anion‐exchange chromatography, and the starch gelatinization properties determined by differential scanning calorimetry, between normal and low‐amylose rice cultivars. Results obtained using rapid viscosity analysis indicated that low‐amylose rice starches had lower peak viscosity, breakdown, and setback values than normal amylose rice starches. Starch granules from low‐amylose rice cultivars had a higher susceptibility to glucoamylase than those from normal amylose rice cultivars. The results of this study showed some differences between normal and low‐amylose rice starches in pasting properties and enzymatic digestibility.     

Octenyl succinic anhydride modified early indica rice starches differing in amylose content

Seven early indica rice starches with different amylose contents were modified by octenyl succinic anhydride (OSA) in aqueous suspension systems to evaluate the effect of amylose contents on starch esterification. The crystalline structure and pasting properties of starches were investigated using X-ray diffraction and a Rapid Visco Analyzer (RVA). The results indicated that the amylose content had a positive impact on the OSA modification. As the amylose content increased from 0 to 39.6%, the degree of substitution increased from 0.024 to 0.030 and the reaction efficiency increased from 62.8 to 77.5%. X-ray diffraction scans confirmed that the amylose was mainly present in the amorphous domain of the granule and was highly substituted after the OSA treatment. The RVA profiles demonstrated that the OSA starches had higher viscosities than their native counterparts. Moreover, negative correlations were observed between the amylose content and the major RVA parameters (e.g., peak viscosity, hot paste viscosity, cool paste viscosity, and breakdown viscosity).     

Physicochemical and structural properties of maize and potato starches as a function of granule size

Chemical composition, molecular structure and organization, and thermal and pasting properties of maize and potato starches fractionated on the basis of granule size were investigated to understand heterogeneity within granule populations. For both starches, lipid, protein, and mineral contents decreased and apparent amylose contents increased with granule size. Fully branched (whole) and debranched molecular size distributions in maize starch fractions were invariant with granule size. Higher amylose contents and amylopectin hydrodynamic sizes were found for larger potato starch granules, although debranched molecular size distributions did not vary. Larger granules had higher degrees of crystallinity and greater amounts of double and single helical structures. Systematic differences in pasting and thermal properties were observed with granule size. Results suggest that branch length distributions in both amylose and amylopectin fractions are under tighter biosynthetic control in potato starch than either molecular size or amylose/amylopectin ratio, whereas all three parameters are controlled during the biosynthesis of maize starch.     

Physicochemical and Structural Characteristics of Flours and Starches from Waxy and Nonwaxy Wheats

A waxy spring wheat (Triticum aestivum L.) genotype was fractionated into flour and starch by roller and wet‐milling, respectively. The resultant flour and starch were evaluated for end‐use properties and compared with their counterparts from hard and soft wheats and with commercial waxy and nonwaxy corn (Zea mays L.) starches. The waxy wheat flour had exceptionally high levels of water absorption and peak viscosity compared with hard or soft wheat flour. The flour formed an intermediate‐strength dough that developed rapidly and was relatively susceptible to mixing. Analysis by differential scanning calorimetry and X‐ray diffractometry showed waxy wheat starch had higher gelatinization temperatures, a greater degree of crystallization, and an absence of an amylose‐lipid complex compared with nonwaxy wheat. Waxy wheat and corn starches showed greater refrigeration and freeze‐thaw stabilities than did nonwaxy starches as demonstrated by syneresis tests. They were also similar in pasting properties, but waxy wheat starch required lower temperature and enthalpy to gelatinize. The results show analogies between waxy wheat and waxy corn starches, but waxy wheat flour was distinct from hard or soft wheat flour in pasting and mixing properties.     

Fine Structures of Starches from Long‐Grain Rice Cultivars with Different Functionality

The structural features of rice starch that may contribute to differences in the functionality of three long‐grain rice cultivars were studied. Dried rough rice samples of cultivars Cypress, Drew, and Wells were analyzed for milling quality, grain physical attributes, and starch structures and physicochemical properties. Drew was lower in head rice yield and translucency and higher in percentage of chalky grains compared with Cypress and Wells. Apparent amylose content (21.3–23.1%), crude protein (8.3–8.6%), and crude fat (0.48–0.64%) of milled rice flours were comparable, but pasting properties of rice flours as measured by viscoamylography, as well as starch iodine affinity and thermal properties determined by differential scanning calorimetry were different for the three cultivars. Drew had higher peak, hot paste, and breakdown viscosities, and gelatinization temperature and enthalpy. Molecular size distribution of starch fractions determined by high‐performance size‐exclusion chromatography showed that the three samples were similar in amylose content (AM) (20.0–21.8%) but differed in amylopectin (AP) (64.7–68.3%) and intermediate material (IM) (10.9–13.5%). Drew had highest AP and lowest IM contents, whereas Cypress had the lowest AP and highest IM contents. High‐performance anion‐exchange chromatography of isoamylase‐debranched starch indicated that the AP of Drew was lower in A and B1 chains but higher in B2, B3, and longer chains.     

Effects of Amylopectin Branch Chain Length and Amylose Content on the Gelatinization and Pasting Properties of Starch

Structures and properties of starches isolated from different botanical sources were investigated. Apparent and absolute amylose contents of starches were determined by measuring the iodine affinity of defatted whole starch and of fractionated and purified amylopectin. Branch chain-length distributions of amylopectins were analyzed quantitatively using a high-performance anion-exchange chromatography system equipped with a postcolumn enzyme reactor and a pulsed amperometric detector. Thermal and pasting properties were measured using differential scanning calorimetry and a rapid viscoanalyzer, respectively. Absolute amylose contents of most of the starches studied were lower than their apparent amylose contents. This difference correlated with the number of very long branch chains of amylopectin. Studies of amylopectin structures showed that each starch had a distinct branch chain-length distribution profile. Average degrees of polymerization (dp) of amylopectin branch chain length ranged from 18.8 for waxy rice to 30.7 for high-amylose maize VII. Compared with X-ray A-type starches, B-type starches had longer chains. A shoulder of dp 18–21 (chain length of 6.3–7.4 nm) was found in many starches; the chain length of 6.3–7.4 nm was in the proximity of the length of the amylopectin crystalline region. Starches with short average amylopectin branch chain lengths (e.g., waxy rice and sweet rice starch), with large proportions of short branch chains (dp 11–16) relative to the shoulder of dp 18–21 (e.g., wheat and barley starch), and with high starch phosphate monoester content (e.g., potato starch) displayed low gelatinization temperatures. Amylose contents and amylopectin branch chain-length distributions predominantly affected the pasting properties of starch.     

Thermal and physicochemical properties of rice grain, flour and starch

Three types of rices, namely, Thailand rice (Indica), Nipponbare (Japonica), and Himenomochi (Japonica waxy), in grain, flour, and starch forms have been studied for their thermal and physicochemical properties. In grain form, Indica was slender and Japonica rices were bold and thick. Indica had the highest protein and amylose equivalent. Protein contents in isolated starches varied from 0.2 to 0.9%. Cooked Indica grain was hardest and waxy rice was softest; stickiness was highest in Japonica rice. Glass transition temperature (T(g)) was highest in Indica rice flour (approximately 222 degrees C) and almost the same in Japonica rice flours. Melting point was highest for Japonica (approximately 264 degrees C) and almost the same for Japonica waxy and Indica rice flours. T(g) values of starches were almost the same in Indica and Japonica waxy (approximately 237 degrees C); defatting caused reduction in this property in all of the starches. Highest melting point was shown by Indica starch (approximately 276 degrees C) and was almost the same for the other two starches. Protein and fats play a critical role in glass transition and melting points of rice flours and their respective starches. Viscosities of the cooked pastes of flour and starch during cooking in an RVA instrument and their gel and other properties have been discussed.     

Physicochemical Properties and In Vitro Starch Digestibility of Cooked Rice from Commercially Available Cultivars in Canada

The influence of amylose content, cooking, and storage on starch structure, thermal behaviors, pasting properties, and rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) in different commercial rice cultivars was investigated. Long grain rice with high‐amylose content had a higher gelatinization temperature and a lower gelatinization enthalpy than the other rice cultivars with intermediate amylose content (Arborio and Calrose) and waxy type (glutinous). The intensity ratio of 1047/1022 cm^–1 determined by Fourier Transform Infrared (FT‐IR), which indicated the ordered structure in starch granules, was the highest in glutinous and the lowest in long grain. Results from Rapid ViscoAnalyser (RVA) showed that the rice cultivar with higher amylose content had lower peak viscosity and breakdown, but higher pasting temperature, setback, and final viscosity. The RDS content was 28.1, 38.6, 41.5, and 57.5% in long grain, Arborio, Calrose, and glutinous rice, respectively, which was inversely related to amylose content. However, the SDS and RS contents were positively correlated with amylose content. During storage of cooked rice, long grain showed a continuous increase in pasting viscosity, while glutinous exhibited the sharp cold‐water swelling peak. The retrogradation rate was greater in rice cultivars with high amylose content. The ratio of 1047/1022 cm^–1 was substantially decreased by cooking and then increased during storage of cooked rice due to the crystalline structure, newly formed by retrogradation. Storage of cooked rice decreased RDS content and increased SDS content in all rice cultivars. However, no increase in RS content during storage was observed. The enthalpy for retrogradation and the intensity ratio 1047/1022 cm^–1 during storage were correlated negatively with RDS and positively with SDS (P ≤ 0.01).     

Effect of Starch Granule Size Distribution and Elevated Amylose Content on Durum Dough Rheology and Spaghetti Cooking Quality

To obtain an indication of the effect of increasing the starch amylose content above normal levels (27–74%) and increasing the percentage of B‐type starch granules (11–60%) on durum dough properties and the quality of the spaghetti derived from these doughs, the reconstitution approach was used. Reconstituted flours were prepared from a common Wollaroi gluten, solubles and tailings fraction combined with starches containing varying B‐granule contents, or with starches from maize with varying amylose content. An increased B‐granule content increased farinograph water absorption. Cooked spaghetti firmness was highest with B‐type granules at 32–44% (volume percentage basis), which is ≈10–15% higher than normally found in durum starch. Increasing the amylose content in the starch caused the dough to be more extensible, increased spaghetti firmness, and decreased water absorption with optimum quality of amylose at 32–44%. The information indicates there would be benefit in producing durum wheats with slightly elevated B‐granule and amylose contents.     

Significance of Starch Properties and Quantity on Sponge Cake Volume

We evaluated the qualitative and quantitative effects of wheat starch on sponge cake (SC) baking quality. Twenty wheat flours, including soft white and club wheat of normal, partial waxy, and waxy endosperm, as well as hard wheat, were tested for amylose content, pasting properties, and SC baking quality. Starches isolated from wheat flours of normal, single‐null partial waxy, double‐null partial waxy, and waxy endosperm were also tested for pasting properties and baked into SC. Double‐null partial waxy and waxy wheat flours produced SC with volume of 828–895 mL, whereas volume of SC baked from normal and single‐null partial waxy wheat flours ranged from 1,093 to 1,335 mL. The amylose content of soft white and club wheat flour was positively related to the volume of SC (r = 0.790, P < 0.001). Pasting temperature, peak viscosity, final viscosity, breakdown, and setback also showed significant relationships with SC volume. Normal and waxy starch blends having amylose contents of 25, 20, 15, and 10% produced SCs with volume of 1,570, 1,435, 1,385, and 1,185 mL, respectively. At least 70 g of starch or at least 75% starch in 100 g of starch–gluten blend in replacement of 100 g of wheat flour in the SC baking formula was needed to produce SC having the maximum volume potential. Starch properties including amylose content and pasting properties as well as proportion of starch evidently play significant roles in SC baking quality of wheat flour.