Studies on rye (Secale cereale L.) lines exhibiting a range of extract viscosities. 2. Rheological and baking characteristics of rye and rye/wheat blends and feeding value for chicks of wholemeals and breads

Five rye lines exhibiting a wide range of extract viscosities were evaluated for the rheological and baking properties of their flours, individually and in blends with hard red spring wheat flour. Commercial cultivars of rye and triticale were included in the study as controls. Extract viscosities of rye flours were higher than those of corresponding wholemeals, indicating shifting of water-extractable arabinoxylan into flour during roller milling. Falling numbers of the rye flours correlated positively with their extract viscosities in the presence (r = 0.73, p < 0.05) or absence (r = 0.65, p < 0.05) of an enzyme inhibitor. Farinograms revealed the weakness of rye and triticale flours compared to wheat flour. Extract viscosities of rye flours were negatively correlated (r = -0.65, p < 0.05) with mixing tolerance index and positively correlated (r = 0.64, p < 0.05) with dough stability, suggesting a positive impact of extract viscosity on dough strength. Extract viscosity was negatively correlated (r = -0.74, p < 0.05) with loaf volume and specific volume (r = -0.73, p < 0.05) and positively correlated (r = 0.73, p < 0.05) with loaf weight of rye/wheat bread. Overall, the results indicated that 30% of flour from high or low extract viscosity rye could be incorporated into rye/wheat breads without seriously compromising bread quality. Inclusion of rye, particularly high extract viscosity rye, in chick diets seriously impeded growth performance and feed efficiency. Part of the arabinoxylan survived bread-making and exerted an effect on chicks, although substantially lower digesta viscosities were observed in chicks fed rye bread diets than in those fed rye wholemeals.     

Protein and Quality Characterization of Triticale Translocation Lines in Breadmaking

Introduction of high molecular weight glutenin subunits (HMW‐GS) from the Glu‐D1d locus of wheat into triticale restores the genetic constitution of high molecular weight glutenin loci to that of wheat and subsequently improves the breadmaking quality of triticale. One means of achieving such restoration of the genetic constitution is through the use of translocation lines. The aim of this study was to evaluate and compare the performance of translocations 1A.1D and 1R.1D with HMW‐GS 5+10 and 2+12 in terms of physical dough tests and baking quality using four different sets of triticale lines, GDS7, Trim, Rhino, and Rigel. In general, significantly lower milling quality (flour yield), very low mixing times with lower loaf volume were typical of all the triticales studied except 1A.1D 5+10 lines, when compared to hard wheat flour (Pegaso). Among the lines studied, significantly higher loaf volume, mixograph dough development time (MDDT), and maximum resistance to extension (R_max) were observed with 1A.1D 5+10 lines indicating that translocation of the Glu‐D1d allele with HMW‐GS 5+10 was beneficial in terms of improving the quality attributes. Although pure triticale flour from these lines did not possess the functional characteristics for good quality bread, the translocation 1A.1D that contains HMW glutenin subunits 5+10 showed significant improvement in quality characteristics, and could reasonably be expected to yield commercially satisfactory bread loaves when combined with bread wheat flour. Significantly higher UPP, R_max, and MDDT values along with a lower gliadin‐to‐glutenin ratio in 1A.1D 5+10 of GDS7 and Rigel sets indicate that the molecular weight distribution was shifted to higher molecular weights, resulting in greater dough strength associated with 5+10 subunits.     

Creep‐Recovery of Wheat Flour Doughs and Relationship to Other Physical Dough Tests and Breadmaking Performance

Measurements of creep‐recovery of flour‐water doughs were made using a dynamic mechanical analyzer (DMA) in a compression mode with an applied probe force of 50 mN. A series of wheat flour and blend samples with various breadmaking potentials were tested at a fixed water absorption of 54% and farinograph optimum water absorption, respectively. The flour‐water doughs exhibited a typical creep‐recovery behavior of a noncross‐linked viscoelastic material varying in some parameters with flour properties. The maximum recovery strain of doughs with a fixed water absorption of 54% was highly correlated (r = 0.939) to bread loaf volume. Wheat flours with a large bread volume exhibited greater dough recovery strain. However, there was no correlation (r = 0.122) between maximum creep strain and baking volume. The maximum recovery strain of flour‐water doughs also was correlated to some of the parameters provided by mixograph, farinograph, and TA‐XT2 extension.     

Breadmaking Use of Andean Crops Quinoa,Kañiwa,Kiwicha, and Tarwi

The effect of addition of flours from the highly nutritious Andean crops quinoa (Chenopodium quinoa), kañiwa (Chenopodium pallidicaule), kiwicha (Amaranthus caudatus), and tarwi (Lupinus mutabilis) has been investigated in wheat doughs and fresh bread quality. The thermomechanical profile of wheat doughs and bread quality has been explored by increasing substitution of wheat flour at 0–100% by Andean crop flours. Dough blends were evaluated using the Chopin Mixolab device, whereas bread quality assessment comprised sensory (overall acceptability) and physicochemical (moisture, specific volume, texture, color) determinations in composite breads. In general, no breads with aerated crumb structure could be obtained from 100% Andean crop flours, with the exception of quinoa breads that had overall sensory values about half a completely perfect score, and which were not significantly different from the breads made from a 50:50 blend of wheat and quinoa. Replacement of wheat flour by ≤12.5% (tarwi), 25% (kañiwa), and 50% (kiwicha), respectively, still produced breads with good sensory acceptability but variable color and doughs with acceptable thermomechanical patterns. Partial substitution of wheat flour by Andean crop flours constitutes a viable option to improve the nutritional value of the breads, with acceptable technological performance of dough blends and composite breads.     

Potential of Triticale as a Substitute for Wheat in Flour Tortilla Production

The potential of triticale as a partial or total substitute for wheat in flour tortilla production was evaluated. Different mixtures of triticale and wheat flours were tested in a typical hot‐press formulation. Both grains yielded similar amounts of flour. Wheat flour contained 1.5% more crude protein, 1.6× more gluten, and produced stronger dough than triticale. Triticale flour significantly reduced optimum water absorption and mix time of blends. Flour tortillas with 100% triticale absorbed 8% less water and required 25% of the mix time of the control wheat flour tortilla. The yield of triticale tortillas was lower than the rest of the tortillas due to lower moisture content and water absorption. Triticale dough balls required less proofing and ruptured during hot pressing, thus producing defective tortillas. The 50:50 flour mixture produced doughs with acceptable rheological properties and good quality tortillas. Addition of 1% vital gluten to the 75:25 triticale‐wheat flour mix or 2% to the 100% triticale flour significantly increased water absorption and mix time and improved dough properties and tortilla yields. Textural studies indicated that increasing levels of triticale flour reduced the force required to rupture tortillas. For all tortilla systems, rupture force gradually increased, and extensibility decreased during seven days of storage at room temperature; the highest rate of change occurred during the first day. Sensory evaluation tests indicated that triticale could substitute for 50% of wheat flour without affecting texture, color, flavor, and overall acceptability of tortillas. For production of 100% triticale flour tortillas, at least 2% vital gluten had to be added to the formulation.     

Formation of Homopolymers and Heteropolymers Between Wheat Flour and Several Protein Sources by Transglutaminase‐Catalyzed Cross‐Linking

The effect of different protein sources (soy flour, lupin flour, egg albumin, gelatin powder, protein‐rich beer yeast flour) on wheat dough functionality was tested by determining gluten index, texture properties, and thermomechanical parameters. Transglutaminase (TG) was also added to improve the dough functionality by forming cross‐links. The presence of protein sources had a significant effect on the gluten index, with the exception of lupin flour. Gelatin and the presence of TG resulted in significant single effects on the texture properties of the wheat‐protein dough. All the protein sources significantly modified the mixing characteristics of the dough or the thermal behavior. Capillary electrophoresis studies of the water‐soluble, salt‐soluble, and glutenin proteins indicated that interactions were mainly within proteins, thus homologous polymers. Scanning electron microscopy studies of the doughs made from blends of wheat and protein sources doughs supported the formation of heterologous structures in the wheat‐lupin blends. The combination of TG and lupin would be a promising method to be used on the treatment of insect‐damaged or weak flours, to increase the gluten strength.     

Effects of Oat Grain Hydrothermal Treatments on Wheat-Oat Flour Dough Properties and Breadbaking Quality

Hydrothermal treatments, which are routine in oat processing, have profound effects on oat flour dough rheological properties. The influence of roasting and steam treatments of oat grain on dough mixing and breadbaking properties was investigated when hydrothermally treated oat flour was blended with wheat flour. Roasting of oat grain (105°C, 2 hr) resulted in oat flours that were highly detrimental to wheat flour dough mixing properties and breadbaking quality. Steaming (105°C, 20 min) or a combination of roasting and steaming of oat grain significantly improved the breadbaking potential of the oat flours. The addition of oat flours increased water absorption and mixing requirements of the wheat flour dough and also decreased bread loaf volume. However, at the 10% substitution level, steamed oat flours exhibited only a gluten dilution effect on bread loaf volume when wheat starch was used as a reference. Oat flour in the breadbaking system decreased the retrogradation rate of bread crumb starch. The results indicate that adequate hydrothermal treatments of oat grain are necessary for oat flour breadbaking applications. Steamed oat flours used at a 10% level retarded bread staling without adversely affecting the loaf volume.     

Effect of Protein Quality,Protein Content,Bran Addition,DATEM, Proving Time,and Their Interaction on Hearth Bread

The effect of protein quality, protein content, bran addition, diacetyl tartaric acid ester of monoglycerides (DATEM), proving time, and their interaction on hearth bread characteristics were studied by size‐exclusion fast protein liquid chromatography, Kieffer dough and gluten extensibility rig, and small‐scale baking of hearth loaves. Protein quality influenced size and shape of the hearth loaves positively. Enhanced protein content increased loaf volume and decreased the form ratio of hearth loaves. The effect of protein quality and protein content was dependent on the size‐distribution of the proteins in flour, which affected the viscoelastic properties of the dough. Doughs made from flours with strong protein quality can be proved for a longer time and thereby expand more than doughs made from weak protein quality flours. Doughs made from strong protein quality flours tolerated bran addition better than doughs made from weak protein quality flours. Doughs made from high protein content flours were more suited for hearth bread production with bran than doughs made from flours with low protein content. DATEM had small effect on dough properties and hearth loaf characteristics compared with the other factors.     

Hearth Bread Characteristics: Effect of Protein Quality,Protein Content,Whole Meal Flour,DATEM, Proving Time,and Their Interactions

The effects of protein quality, protein content, ingredients, and baking process of flour blends on hearth loaves were studied. The flour blends varied in protein composition and content. Flours of strong protein quality produced hearth loaves with larger loaf volume, larger bread slice area, and higher form ratio (height/width) than flours of weak protein quality. The effect of protein content on hearth loaf depended on the size distribution of the proteins. Increasing protein content was associated with increased percentage of the largest glutenin polymers, and loaf volume and slice area increased significantly. The form ratio, however, remained unchanged with increasing flour protein content. Strong protein quality flours tolerated addition of whole meal flour better than weak protein quality flours. Increased amount of flour with strong protein quality improved hearth bread characteristics to a larger extent than increased protein content. Diacetyl tartaric acid ester of monoglycerides (DATEM) improved hearth bread characteristics, but the effect was small compared with the effect of protein composition.     

Evaluation of Various Baking Methods for Polished Wheat Flours

Flour qualities of polished wheat flours of three fractions, C‐1 (100–90%), C‐5 (60–50%), and C‐8 (30–0%), obtained from hard‐type wheat grain were used for the evaluation of four kinds of baking methods: optimized straight (OSM), long fermentation (LFM), sponge‐dough (SDM) and no‐time (NTM) methods. The dough stability of C‐5 in farinograph mixing was excellent and the maturity of polished flour doughs during storage in extensigraph was more improved than those of the commercial wheat flour (CW). There were no significant differences in the viscoelastic properties of CW dough after mixing, regardless of the baking method, while those of polished flour doughs were changed by the baking method; this tendency became clear after fermentation. The polished flours could make a better gluten structure in the dough samples after mixing or fermentation using LFM and SDM, as compared with other baking methods. Baking qualities such as specific volume and storage properties of breads from all polished flours made with SDM increased more than with other methods. In addition, viscoelastic properties of C‐5 and C‐8 doughs fermented by SDM were similar to those of CW, and the C‐5 breadcrumb showed softness similar to that of the CW. Also, SDM could make C‐5 bread with significantly higher elasticity and cohesiveness after storage for five days when compared with CW bread. Therefore, SDM with long fermentation, as compared with other baking methods, was considered suitable for use with polished flours to give better effects on dough properties during fermentation, resulting in more favorable bread qualities.     

Effects of a Novel Barley,Himalaya 292, on Rheological and Breadmaking Properties of Wheat and Barley Doughs

A barley mutant with high‐amylose starch, Himalaya 292, combines the potential cholesterol reducing effects of barley with the gastrointestinal benefits of high‐amylose resistant starches. Himalaya 292 has alterations in the content and composition of a range of grain constituents, thus conditions for successful addition to foods need to be defined. In this study, the rheological and breadmaking properties of doughs prepared by combining wheat flours (with various gluten protein compositions) with various barley genotypes (Himalaya 292 and the control cultivars Himalaya and Torrens) have been determined. The effects of barley addition on the rheological properties of the admixtures differed. While addition of Himalaya 292 increased the strength and reduced the extensibility of admixture doughs, addition of the Himalaya and Torrens barley flours to the wheat flours reduced both strength and extensibility. The addition of Himalaya and Torrens barley flour reduced water absorption levels. However, addition of Himalaya 292 whole grain flour increased the water absorption of the admixtures significantly (P < 0.01). The baking data showed that selection of an appropriate wheat flour with a combination of strength and extensibility allows higher levels of incorporation of barley, facilitating an increased delivery per serving of constituents with positive health attributes in β‐glucan and resistant starch.     

Transgenic Enhancement of High‐Molecular‐Weight Glutenin Subunit 1Dy10 Concentration: Effects in Wheat Flour Blends and Sponge and Dough Baking

Dough strength is needed for efficient breadmaking quality. This property is strongly influenced in wheat (Triticum aestivum L.) by gluten seed storage proteins and, in particular, by high‐molecular‐weight (HMW) glutenin subunit composition. Experiments were designed to elevate expression of a key native HMW glutenin subunit (1Dy10) via genetic engineering and to determine whether resultant flours can be used in sponge and dough applications, the most common commercial bread‐baking procedure. Both unblended and blended samples from transgenic and nontransgenic sister lines were tested, with blended samples being formed by addition to a control sample. Dough properties, as determined by farinograph evaluation, were improved by the transgene‐encoded increases in 1Dy10 in both undiluted and blended flours. Mean farinograph stability of transgenic samples was twice that of the control, and blends with transgenic samples demonstrated increases in stabilities proportional to the amount of transgenic flour included. Mean farinograph quality numbers of transgenic samples, and of all blends containing transgenic flour, were significantly higher than both the control and all nontransgenic treatments. In the sponge and dough bake procedure, undiluted transgenic samples induced lower scores, relative to both control and undiluted nontransgenic samples, for water absorption, crumb body firmness, and loaf volume. In blends, however, the transgenic samples resulted in improvements in some sponge and dough loaf attributes, including loaf symmetry and crumb color score, without any concomitant loss of loaf volume in transgenic blends. These improved variables relate to finished product appearance and to consumer selection in markets. The use of transgenic flours with increased 1Dy10 glutenin content in commercial blends could provide advantages in sponge and dough bake applications.     

Influence of Added Starch on Mixing of Dough Made with Three Wheat Flours Differing in High Molecular Weight Subunit Composition: Rheological Behavior

The effect of mixing time (6 and 20 min) and starch content were studied on doughs prepared with three wheat flours differing in high molecular weight subunit composition. Rheological measurements were performed in dynamic oscillation: frequency and strain sweeps, stress relaxation, and in large deformation viscosity measurements. The flours were diluted with starch to cover flour protein contents of 10–15%. Water was added to keep the starch‐water ratio constant when doughs were prepared with different protein contents. By increasing the starch content of the doughs, the rheological properties approached those of a starch‐water mixture prepared with the same starch‐water ratio as in the dough. The effect of the starch granules was reinforced by prolonged mixing. This may explain the higher values of the storage modulus and relaxation times observed after 20 min of mixing. Qualities related to gluten properties, appeared more clearly in large deformation viscosity measurements.     

Effect of Storage on Fat Acidity and Pasting Characteristics of Wheat Flour

Two cultivars of wheat (Triticum aestivum L.), Sunco and Sunsoft, were used to study the influence of storage time and temperature on the formation of starch-lipid complexes in flour pastes. Untreated and fat-reduced whole meal flours were stored separately for up to 12 months at 4, 20, and 30°C. The stored samples were analyzed for fat acidity, pasting properties, and iodine binding values. Fat acidity increased significantly in the untreated flour samples stored at 30 and 20°C compared with 4°C. Starch pasting properties, as measured using a Rapid Visco Analyser (RVA) indicated that the final viscosity of untreated flour samples of both cultivars increased significantly with storage time and elevated temperature, and correlated positively with increased fat acidity. Iodine binding values of the RVA pastes decreased with storage time and elevated temperature, and correlated negatively with fat acidity and final viscosity. The fat-reduced Sunco and Sunsoft flours showed less pronounced changes compared with untreated flours, whereas small changes in the RVA parameters were noted in grains stored over 12 months. The results indicate that free fatty acids are released during storage and that they increase the potential for starch-lipid complex formation when stored whole meal wheat flours are pasted in the RVA. These changes were evident after two to three months of storage at 20 and 30°C.     

Effect of Dough Processing Conditions and DATEM on Norwegian Hearth Bread Prepared from Frozen Dough

The objective of this study was to examine treatments that directly influence Norwegian lean doughs destined to be frozen. Therefore a strip-block experimental design with four dough treatment factors (wheat flour blend, diacetyl tartaric acid esters of monoglycerides [DATEM], water absorption, and dough temperature) and two storage factors (frozen storage time and thawing time) was used. Four levels were selected for frozen storage time and two levels were selected for the remaining factors. After frozen storage (2–70 days), the doughs were thawed and baked. Principal component analysis showed that to obtain a high loaf volume and bread score after freezing, a high dough temperature after mixing (27°C) was essential. The highest form ratio (height/width) level was obtained after 28 days of frozen storage and with a short thawing time (6 hr). Analysis of variance (ANOVA) of dough treatments showed that an increase in dough temperature from 20 to 27°C after mixing resulted in a significant increase in loaf volume (1,653 to 2,264 mL), form ratio (0.64 to 0.69), and bread score (1.7 to 3.2), and a reduction in loaf weight (518.4 to 512.5 g) and crumb score (7.9 to 5.9, i.e., a more open bread crumb). Also, the addition of DATEM significantly increased loaf volume (1,835 to 2,081 mL), form ratio (0.64 to 0.69), and bread score (2.2 to 2.6). Frozen dough storage time significantly affected loaf volume, loaf weight, bread score, and crumb score. Increasing thawing time from 6 to 10 hr significantly increased loaf volume (1,855 to 2,121 mL), and reduced the form ratio (0.69 to 0.63) and loaf weight (516.8 to 511.4 g). ANOVA of the interaction between dough treatment and frozen storage time showed that decreasing water absorption significantly increased the loaf volume.     

Structural Modification of Gluten Proteins in Strong and Weak Wheat Dough as Affected by Mixing Temperature

The effects of temperature (≥25°C) on dough rheological properties and gluten functionality have been investigated for decades, but no study has addressed the effect of low temperature (<30°C) on gluten network attributes in flours with strong and weak dough characteristics. This study monitored changes in protein extractability in the presence and absence of reducing agents, the contents of readily accessible and SDS‐accessible thiols, and the secondary structural features of proteins in doughs from commercial hard wheat flour (HWF) and soft wheat flour (SWF) mixed at 4, 15, and 30°C. SWF mixed at 4 and 15°C showed similar mixing properties as HWF mixed at 30°C (which is the standard temperature). The effect of mixing temperature is different at the molecular level between the two flours studied. Protein features of HWF did not change as mixing temperature decreased, with the only exception being an increase in SDS‐accessible thiols. Decreasing mixing temperature for SWF caused an increase in SDS protein solubility and SDS‐accessible thiols as well as an increase in β‐turn structures at the expense of β‐sheet structures. Thus, noncovalent interactions appear to drive protein network at low temperatures (4 and 15°C), whereas covalent interactions dominate at standard mixing temperature (30°C) in doughs from both flours.     

Lipid Extraction Process on Texturized Soy Flour and Wheat Gluten Protein‐Protein Interactions in a Dough Matrix

Protein‐protein interactions between wheat flour and solvent‐extracted (SE) or nonsolvent extracted (NSE) texturized soy flours were compared. Doughs were prepared to contain varying ratios of texturized soy flour in combination with wheat flour. Sucrose esters (2.5%) were included in several formulations. Doughs were fractionated into soluble and insoluble fractions at pH 4.7 and pH 6.1. Fractions were dried, powdered, and analyzed using SDS‐PAGE and spectrophotometric techniques. Electrophoretic evaluation indicated interactions between wheat gluten proteins and texturized soy proteins in the absence of sucrose esters. Electrophoretic gels of the wheat‐soy flour mixtures maintained a characteristic soy protein band after acidification to the soy protein isoelectric point. Inclusion of sucrose esters increased the interaction. Texturization conferred effects similar to that of sucrose ester on both forms of lipid‐extracted soy. Sulfhydryl analyses using 7‐chloro‐4‐nitrobenzo‐2‐oxa‐4, 3‐diazole (NBD‐Cl) revealed no change in the relative amount of sulfhydryl groups present in doughs prepared from either the texturized soy flours or the doughs containing equal amounts of wheat starch. These data indicate that interactions between soy protein from texturized soy flours and wheat proteins are not covalent.     

Impact of Waxy,Partial Waxy,and Wildtype Wheat Starch Fraction Properties on Hearth Bread Characteristics

Thirteen different wheat cultivars were selected to represent GBSS mutations: three each of wildtype, axnull, and bxnull, and two each of 2xnull and waxy. Starch and A‐ and B‐granules were purified from wheat flour. Hearth bread loaves were produced from the flours using a small‐scale baking method. A‐granules purified from wildtype and partial waxy (axnull, bxnull, and 2xnull) starches have significantly higher gelatinization enthalpy and peak viscosity compared with B‐granules. A‐ and B‐granules from waxy starch do not differ in gelatinization, pasting, and gelation properties. A‐ and B‐granules from waxy starch have the highest enthalpy, peak temperature, peak viscosity, breakdown, and lowest pasting peak time and pasting temperature compared with A‐ and B‐granules from partial waxy and wildtype starch. Waxy wheat flour has much higher water absorption compared with partial waxy and wildtype flour. No significant difference in hearth bread baking performance was observed between wildype and partial waxy wheat flour. Waxy wheat flour produced hearth bread with significantly lower form ratio, weight, a more open pore structure, and a bad overall appearance. Baking with waxy, partial waxy, and wildtype wheat flour had no significant effect on loaf volume.     

Effects of Transglutaminase Enzyme on Fundamental Rheological Properties of Sound and Bug‐Damaged Wheat Flour Doughs

Transglutaminase (TG) catalyzes the formation of nondisulfide covalent crosslinks between peptide‐bound glutaminyl residues and ∊‐amino groups of lysine residues in proteins. Crosslinks among wheat gluten proteins by TG are of particular interest because of their high glutamine content. Depolymerization of wheat gluten proteins by proteolytic enzymes associated with bug damage causes rapid deterioration of dough properties and bread quality. The aim of the present study was to investigate the possibility of using TG to regain gluten strength adversely affected by wheat bug proteases. A heavily bug‐damaged (Eurygaster spp.) wheat flour was blended with sound cv. Augusta or cv. Sharpshooter flours. Dynamic rheological measurements, involving a frequency sweep at a fixed shear stress, were performed after 0, 30, and 60 min of incubation on doughs made from sound or blended flour samples. The complex moduli (G* values) of Augusta and Sharpshooter doughs blended with 10% bug‐damaged flour decreased significantly after 30 min of incubation. These dough samples were extremely soft and sticky and impossible to handle for testing purposes after 60 min of incubation. To test the possibility of using TG to counteract the hydrolyzing effect of bug proteases on gluten proteins, TG was added to the flour blends. The G* values of TG‐treated sound Augusta or Sharpshooter doughs increased significantly after 60 min of incubation. The G* values of the Augusta or Sharpshooter doughs blended with bug‐damaged flour increased significantly rather than decreased after 30 and 60 min of incubation when TG was included in the dough formulation. This indicates that the TG enzyme substantially rebuilds structure of dough hydrolyzed by wheat bug protease enzymes.     

Effect of Enzymatic Tempering of Wheat Kernels on Milling and Baking Performance

This study examined the effect of cell‐wall‐degrading enzymes added to temper water on wheat milling performance and flour quality. An enzyme cocktail consisting of cellulase, xylanase, and pectinase and five independent variables (enzyme concentration, incubation time, incubation temperature, tempered wheat moisture content, and tempering water pH) were manipulated in a response surface methodology (RSM) central composite design. A single pure cultivar of hard red winter wheat was tempered under defined conditions and milled on a Ross experimental laboratory mill. Some treatment combinations affected flour yield from the break rolls more than that from the reduction rolls. However, a maximum for flour yield was not found in the range of parameters studied. Though treatments did not affect the optimum water absorption for breadmaking, enzyme‐treated flours produced dough exhibiting shorter mixing times and slack and sticky textures compared with the control. Regardless of differences in mixing times, specific loaf volumes were not significantly different among treatments. Crumb firmness of bread baked with flour milled from enzyme‐treated wheat was comparable to the control after 1 day but became firmer during storage up to 5 days.