Reverse phase liquid chromatographic determination and confirmation of aflatoxin M1 in cheese

A systematic method is proposed for determination and confirmation of aflatoxin M1 in cheese by liquid chromatography (LC). A sample of cheese is extracted with chloroform, cleaned up on 2 silica gel columns followed by a Sep-Pak C18 cartridge, and chromatographed on a 5 microns octadecyl silica column with fluorometric detection. The sample extract or standard is treated with n-hexane-trifluoroacetic acid (TFA) (4 + 1) for 30 min at 40 degrees C. Analysis by LC with TFA-treatment of the extract provides quantitative data. Multiple assays of 5 samples of Gouda cheese spiked with aflatoxin M1 at levels of 0.5, 0.1, and 0.05 ng/g showed average recoveries of 93.2, 91.6, and 92.4%, with coefficients of variation of 2.63, 3.97, and 4.52%, respectively. Assay of 5 naturally contaminated cheeses resulted in 0.051-0.448 ng/g of aflatoxin M1. Limit of quantitation is about 0.01 ng/g. The identity of aflatoxin M1 is confirmed by treating aflatoxin M1 or the M2a derivative with TFA-methanol (or ethanol) (3 + 1). The TFA-methanol reaction products of M2a could be detected quantitatively.     

Direct enzyme-linked immunosorbent assay for determining aflatoxin M1 at picogram levels in dairy products

Protocols for detecting picogram quantities of aflatoxin M1 in dairy products were established. Milk samples were subjected to a reverse phase Sep-Pak C18 cartridge treatment before analysis by an enzyme-linked immunosorbent assay (ELISA) according to previously published procedures. M1 in yogurt, brick cheddar, and ripened Brie cheese was extracted by a modified Pons method, subjected to a normal phase silica cartridge treatment, and analyzed by ELISA. The detection limits for M1 in milk, yogurt, cheddar, and Brie were 10, 10, 50, and 25 ppt (ng/kg), respectively. Recovery for M1 added to these products was in the range 70-110%. Good agreement was found for M1 levels in several naturally contaminated milk samples analyzed by both ELISA and liquid chromatography.     

Liquid chromatographic determination of aflatoxin M1 in milk

The official AOAC method for aflatoxin M1 in milk was modified by replacing cellulose column chromatography with cartridge chromatographic cleanup and replacing thin layer chromatographic (TLC) determination with liquid chromatographic (LC) quantitation to yield a new method for bovine and porcine milk. An acetone extract of milk is treated with lead acetate and defatted with hexane, and M1 is partitioned into chloroform as in the AOAC method. Chloroform is removed by evaporation under a stream of nitrogen at 50 degrees C. The residue is dissolved in chloroform, the vessel is rinsed with hexane, and the 2 solutions are applied in sequence to a hexane-activated silica Sep-Pak cartridge. Less polar impurities are removed with hexane-ethyl ether, and M1 is eluted with chloroform-methanol, and determined by C18 reverse phase LC using fluorescence detection. Recoveries of M1 added to bovine milk at 0.25, 0.50, and 1.0 ng/mL were 90.8, 93.4, and 94.1%, respectively. The limit of detection was less than 0.1 ng M1/mL for both bovine and porcine milk.     

Liquid chromatographic determination of aflatoxins in feedstuffs containing citrus pulp

A liquid chromatographic (LC) method was developed for the determination of aflatoxins in feedstuffs containing citrus pulp. The feed-stuff sample is extracted with chloroform, followed by Sep-Pak Florisil cartridge cleanup and Sep-Pak C18 cartridge cleanup. The final eluate (water-acetone, 85 + 15, v/v) is submitted to reverse-phase liquid chromatography with water-methanol-acetonitrile (130 + 70 + 40, v/v/v) as mobile phase and postcolumn derivatization with iodine. Citrus components are removed from the extract efficiently. The limit of detection for aflatoxin B1 is less than 1 microgram/kg. Other aflatoxins can also be detected and measured. Recoveries of aflatoxins B1, B2, G1, and G2 for dairy rations spiked at 13, 5, 10, and 4 micrograms/kg were 87, 86, 81, and 82%, respectively. Corresponding coefficients of variation were 3.1, 3.6, 5.2, and 3.8%, respectively.     

Liquid chromatographic determination of desfuroylceftiofur metabolite of ceftiofur as residue in cattle plasma

A liquid chromatographic (LC) method has been developed for the determination of the desfuroylceftiofur metabolite of ceftiofur as a residue in the plasma of animals. Plasma sample in 0.1M pH 8.7 phosphate buffer containing dithioerythritol is incubated under nitrogen for 15 min at 50 degrees C. The sample is centrifuged, charged to a C18 cartridge, and washed with 0.1M ammonium acetate. The desfuroylceftiofur residue on the cartridge is derivatized by adding 0.1M ammonium acetate containing iodoacetamide and letting the cartridge stand in the dark for 30 min. The cartridge is then drained and rinsed, and the desfuroylceftiofur acetamide is eluted with methanol. The mixture is evaporated to dryness, dissolved in pH 10.6 sodium hydroxide, and charged to a SAX cartridge. The derivative is eluted with 2% acetic acid, reduced in volume, and dissolved in mobile phase for liquid chromatography. The LC system includes a C8 column and guard cartridge with UV detection at 254 nm. The gradient mobile phase (flow rate 1 mL/min) is 0.01M pH 5 ammonium acetate programmed to 29% methanol-water (60 + 40) in 25 min. Recoveries were 90-100% with a sensitivity of 0.1 ppm or less. The procedure has been applied to the plasma of cattle, rats, horses, pigs, and dogs.     

Determination of aflatoxin M1 in milk by liquid chromatography with fluorescence detection

A liquid chromatographic (LC) method is proposed for the determination of aflatoxin M1 in milk. The method was successfully applied to both liquid whole and skim milk and also whole and skim milk powder. The samples are initially extracted with acetonitrile-water followed by purification using a silica gel cartridge and a C18 cartridge. Final analysis by LC was achieved using a radial compression module equipped with a 5 micron C18 column and a fluorescence detector. The method was successfully applied to samples at levels of 10 to 0.08 ppb added aflatoxin M1 with recoveries in the range of 70-98%.     

Simple, rapid cleanup method for analysis of aflatoxins and comparison with various methods

A method is described for simple and rapid determination of aflatoxins in corn, buckwheat, peanuts, and cheese. Aflatoxins were extracted with chloroform-water and were purified by a Florisil column chromatographic procedure. Column eluates were concentrated and spotted on a high performance thin layer chromatographic (HPTLC) plate, which was then developed in chloroform-acetone (9 + 1) and/or ether-methanol-water (94 + 4.5 + 1.5) or chloroform-isopropanol-acetone (85 + 5 + 10). Each aflatoxin was quantitated by densitometry. The minimum detectable aflatoxin concentrations (micrograms/kg) in various test materials were 0.2, B1; 0.1, B2; 0.2, G1; 0.1, G2; and 0.1, M1. Recoveries of the aflatoxins added to corn, peanut, and cheese samples at 10-30 micrograms/kg were greater than 69% (aflatoxin G2) and averaged 91%, B1; 89%, B2; 91%, G1; 78%, G2; and 92%, M1. The simple method described was compared with the AOAC CB method, AOAC BF method, and AOAC milk and cheese method. These methods were applied to corn, peanut, and cheese composites spiked with known amounts of aflatoxins, and to naturally contaminated buckwheat and cheese. Recoveries were much lower for the BF method compared with our simple method and the CB method.     

Effects of injection solvent and mobile phase on efficiency in reverse-phase liquid chromatographic determination of aflatoxin M1

The effects of injection solvent and mobile phase composition on the reverse-phase liquid chromatographic determination of aflatoxin M1 (M1) were examined. M1 was converted to the more highly fluorescent derivative aflatoxin M2a (M2a). Using a C-18 column and a mobile phase of H2O-MeCN-MeOH (60 + 20 + 20) (MP-A), M2a was dissolved in various ratios of MeCN-H2O prior to injection. Chromatographic efficiency for the M2a peak varied from ca 2000 theoretical plates when injected in 30% aqueous MeCN to ca 9000 plates when injected in water alone. However, using the same C-18 column but with a mobile phase of H2O-IPA-MeCN (80 + 12 + 8) (MP-B), the M2a peak exhibited 25,000 plates when injected in 30% aqueous MeCN and 10,000 plates when injected in water alone.     

Improved liquid chromatographic determination of riboflavin in milk and dairy products

Reported here is a simple liquid chromatographic (LC) method for the determination of riboflavin in milk (liquid, evaporated, and dry), yogurt, and cheese. The method involves passing liquid samples or filtrates of semisolid and solid samples through a C18 cartridge. Retained riboflavin is then eluted with an aliquot of 50% methanol in 0.02M acetate buffer of pH 4. A volume of the eluate is injected into the LC system consisting of a C18 column, a solvent of water-methanol-acetic acid (65 + 35 + 0.1, v/v) with a flow rate of 1 mL/min, and a UV detector set at 270 nm. The method is precise and accurate and compares favorably with the present AOAC method. Moreover, it involves fewer sample preparation steps and has a total analysis time of less than 1 h.     

Rapid immunochemical screening method for aflatoxin B1 in human and animal urine

A method has been developed to determine the presence of aflatoxin B1 in the urine of animals (including humans) by utilizing commercial immunochemical kits that can be used in the field. Urine is treated with diatomaceous earth and filtered to clarify the sample; 2-3 ppb aflatoxin B1, corresponding to about 300 ppb in the ingested feed/food, can be detected in the filtered urine without further purification. To improve sensitivity, the urine filtrate is passed through a C18 solid phase column to extract the aflatoxin. The column is washed with acetonitrile-water (15 + 85) and water, aflatoxin B1 is eluted with methanol-water (7 + 3), and water is added to the eluate, which is then tested for aflatoxin with the test kit. The limit of detection is 0.2 ppb, reflecting consumption of 40 ppb or more aflatoxin in the feed/food. When the initial sample volume is adequate, purification through the C18 column step is usually sufficient. For limited sample volumes, the eluate from the C18 column is mixed with water, added to an immunosorbent affinity column, and washed with water to remove excess sample matrix and impurities. Aflatoxin B1 is eluted with acetonitrile. The extract is evaporated under nitrogen and the residue is redissolved in methanol-water (25 + 75). At this purification stage, the limit of detection is reduced to 0.05 ppb.     

Development and application of solvent-free extraction for the detection of aflatoxin M1 in dairy products by enzyme immunoassay

The official methods for the quantification of aflatoxin M1 in dairy products (cheese and yogurt) include extraction into dichloromethane or chloroform, evaporation of the solvent, partitioning of the reconstituted residue with hexane, and subsequent analysis. To secure a rapid and inexpensive screen for aflatoxin M1 contamination, a sensitive competitive ELISA, using a rabbit polyclonal antibody, was developed for measuring aflatoxin M1 in milk and used in a comparative study for measuring the extraction efficiency of aflatoxin M1 in aqueous or organic solvent buffers using yogurt samples. An aqueous sodium citrate solution was found to be suitable for extracting aflatoxin M1, thus eliminating the need for organic solvents. The citrate extraction proved to be efficient (recovery ranged from 70 to 124%) in fortified samples of very different kinds of dairy products, including yogurt and six types of cheese. Fourteen yogurt and cheese samples were extracted with citrate solution and analyzed by ELISA. A good correlation was observed (y=0.95x-0.59, r2=0.98) when the data were compared with those obtained through the official method, across a wide range of aflatoxin M1 contaminations (10-200 ng/kg).     

Liquid chromatographic determination of ochratoxin A in coffee beans and coffee products

A liquid chromatographic method for the determination of ochratoxin A in coffee beans (green and roast), instant coffee, and coffee drink is described. The sample is subjected to extraction with methanol-1% aqueous sodium bicarbonate (1 + 1) and C18 cartridge cleanup. The extract is chromatographed on a Nucleosil 5C18 column with a mobile solvent of acetonitrile-water-0.2M phosphate buffer pH 7.5 (50 + 47 + 3) containing 3 mM cetyltrimethylammonium bromide as an ion-pair reagent. Ochratoxin A is detected with a fluorometer (excitation 365 nm, emission 450 nm). The sensitivity was increased 20-fold by using ion-pair resolution. The detection limits corresponded to 2 micrograms/kg for coffee beans, 5 micrograms/kg for instant coffee, and 0.2 microgram/kg for coffee drink. The recoveries from coffee products were generally better than 80.7% and the relative standard deviations were 3.43-5.93%. The peak coinciding with ochratoxin A can be confirmed by treatment using alcohol (methanol, ethanol, or n-propanol) and H2SO4.     

Liquid chromatographic determination of cephapirin residues in milk

A liquid chromatographic (LC) method was developed for quantitative determination of cephapirin residues in milk that also resolved cephapirin from ampicillin, cloxacillin, and penicillin G. Diluted milk was passed through a C18 cartridge on which the cephapirin was adsorbed; then, interfering material was removed by washing with water and methylene chloride and cephapirin residues were eluted with methanol-acetonitrile (25 + 75). After drying, residues were dissolved in the mobile phase for injection. The LC system had an ultrasphere-ODS column with RP-18 Spheri-10 guard column and a UV detector with a 254 nm filter. The mobile phase was 85% sodium acetate (0.01M) and 15% methanol-acetonitrile (25 + 75) with a flow rate of 1 mL/min. Sensitivity was 20 ppb or less with a recovery of 61-80% in the range studied. Other beta-lactam antibiotics tested did not interfere with detection of cephapirin. Analysis of 30 samples of commercial homogenized milk obtained for a survey of antibiotics in consumer milk in Canada revealed no detectable cephapirin residues.     

Residue level determination of the aquatic herbicide fluridone and a potential photoproduct (N-methylformamide) in water

Methods are presented for the determination of the aquatic herbicide fluridone and N-methylformamide (NMF), a potential photoproduct of fluridone which has thus far been observed only in a laboratory aqueous photolysis study. Water samples are passed through a Sep-Pak C18 cartridge to extract fluridone while NMF passes unretained through the cartridge with the water. Fluridone is eluted from the cartridge with methanol, which is then concentrated for analysis by liquid chromatography with UV detection at 313 nm. The water eluate containing NMF is concentrated for analysis by rotary vacuum evaporation at 40-46 degrees C. Methanol is added to help evaporate the water, and glycerol is added as a keeper solvent to retain NMF during the evaporation. The residual NMF is dissolved in methanol for analysis by gas chromatography with a Hall electrolytic conductivity detector operated in the nitrogen mode. The assay limits of detection are 1 and 2 ppb for fluridone and NMF, respectively. Recoveries averaged 98% for fluridone at 1-400 ppb and 87% for NMF at 2-50 ppb.     

Rapid determination of aflatoxins in raw peanuts by liquid chromatography with postcolumn iodination and modified minicolumn cleanup

A method is described for rapid cleanup followed by reverse-phase liquid chromatographic (LC) quantitation of aflatoxins in raw peanuts. A modified minicolumn cleanup is used for sample preparation, and a preliminary estimation of aflatoxin content by minicolumn can be made so that highly contaminated samples can be diluted before LC analysis. The use of the simple, quick minicolumn cleanup eliminates the need for further column or cartridge cleanup, thus greatly reducing sample preparation time. Sensitive quantitation is achieved using a phenyl column, a mobile phase of water-tetrahydrofuran (80 + 20, v/v), and postcolumn derivatization with water-saturated iodine followed by fluorescence detection. The recoveries of aflatoxins B1, B2, G1, and G2 from peanut meal spiked at 3 levels ranged from 71.7 to 88.3% (average 80%) with coefficients of variation from 2.7 to 10.4%.     

Liquid chromatographic determination of aflatoxicol in porcine liver

A liquid chromatographic (LC) method for determination of aflatoxicol in porcine liver was developed. Liver sample is homogenized with water, diluted with saturated Na2SO4 solution, and extracted with acetone. After filtration, less polar interferences are removed by partition with isooctane. Aflatoxicol in the aqueous fraction is partitioned into CHCl3. The extract is dried over anhydrous Na2SO4 and evaporated nearly to dryness at 35 degrees C under a gentle flow of dry filtered air or nitrogen. Residue is dissolved in CHCl3-hexane and applied to a hexane-activated silica cartridge. The cartridge is washed with hexane-CHCl3, then aflatoxicol is eluted with CHCl3-acetone. Purified extract is evaporated to dryness, dissolved in methanol, and analyzed by C18 reverse phase liquid chromatography using a water-CH3CN-acetic acid mobile phase and fluorescence detection. Recovery of aflatoxicol from spiked liver samples at levels ranging from 0.25 to 4.0 ng aflatoxicol/g wet tissue averaged 92% with a limit of detection of about 0.1 ng aflatoxicol/g liver.     

Liquid chromatographic determination of monensin in chicken tissues with fluorometric detection and confirmation by gas chromatography-mass spectrometry

An accurate, sensitive method is described for the determination of monensin residue in chicken tissues by liquid chromatography (LC), in which monensin is derivatized with a fluorescent labeling reagent, 9-anthryldiazomethane (ADAM), to enable fluorometric detection. Samples are extracted with methanol-water (8 + 2), the extract is partitioned between CHCl3 and water, and the CHCl3 layer is cleaned up by silica gel column chromatography. Free monensin, obtained by treatment with phosphate buffer solution (pH 3) at 0 degrees C, is derivatized with ADAM and passed through a disposable silica cartridge. Monensin-ADAM is identified and quantitated by normal phase LC using fluorometric detection. The detection limit is 1 ppb in chicken tissues. Recoveries were 77.6 +/- 1.8% at 1 ppm, 56.7 +/- 7.1% at 100 ppb, and 46.5 +/- 3.7% at 10 ppb fortification levels in chicken. Gas chromatography-mass spectrometry is capable of confirming monensin methyl ester tris trimethylsilyl ether in samples containing residues greater than 5 ppm.     

Liquid chromatographic determination of L-ascorbic acid in candies and soft drinks

The L-ascorbic acid (AsA) contents of candies and soft drinks available in the market were determined by liquid chromatography (LC). Samples are cleaned up on a disposable Sep-Pak C18 cartridge followed by reverse phase separation on an ODS column using a mobile phase of 0.1% phosphoric acid (pH 2.2). The AsA peak is detected on the basis of the UV absorption at 254 nm. The detection limit was 1 microgram/mL final concentration. Recoveries of AsA added at levels of 1-10 mg/g candy and 1-10 mg/10 mL soft drink were 99.2-101.7% with a coefficient of variation of 0.52-1.20% (n = 5). The present method allows rapid and accurate assays because it is a simple procedure compared with the official dye-titration method, and it is suitable for the routine analysis of AsA in selected candies and soft drinks.     

Determination of S-methyl-, S-propyl-, and S-propenyl-L-cysteine sulfoxides by gas chromatography-mass spectrometry after tert-butyldimethylsilylation

A gas chromatographic-mass spectrometric method for the determination of S-methyl-L-cysteine sulfoxide (1), S-propyl-L-cysteine sulfoxide (2), and S-propenyl-L-cysteine sulfoxide (3), specific marker compounds in the genus Allium, is described. The target amino acids were converted to the tert-butyldimethylsilyl derivatives. The products were silylated on the amino and carboxyl groups and on an additional oxygen atom and were separated on a nonpolar capillary column. That incorporation of three tert-butyldimethylsilyl groups had occurred was verified by mass spectrometry, which gave an m/z 302 fragment as base peak (amino acid side chain eliminated ion) and m/z 436 (1), 464 (2), or 462 (3) as major peaks (tert-butyl function eliminated ion), by electron impact ionization. The detection limits for 1 and 2 under selected ion monitoring at m/z 436 (1) and m/z 464 (2), respectively, were determined to be 0.3 and 1.8 ng per injection. To clean up the analytes from the solvent extract of onion, as a representative food material, onion, the sample solution was subjected to combined solid phase extraction. The eluate from a Sep-Pak C(18) cartridge was applied to a Bond Elut SCX cartridge (H(+) form), followed by washing with 0.1 M hydrochloric acid and elution with 0.5 M ammonia. From a simulated matrix solution containing 5% sucrose, 1 and 2 were extracted quantitatively, and the detection yield was approximately 75%. The contents of 1, 2, and 3 in commercial onion were estimated to be 0.3, 3.1, and 3.0 mg, respectively, per gram of fresh weight.     

Rapid high pressure liquid chromatographic determination of aflatoxin M1 in milk and nonfat dry milk

A modification of the current revised AOAC method, 26.A10-26.A15, is described for the rapid analysis of aflatoxin M1 in milk and nonfat dry milk. The method incorporates chloroform extraction and eliminates the need for column chromatography by using liquid-liquid partition for sample extract cleanup. Quantitation is carried out by using fluorescence detection combined with high pressure liquid chromatography (HPLC) of aflatoxin M1 which has been converted to aflatoxin M2a with trifluoroacetic acid. The method has a detection limit of 0.014 micrograms/L (2 X signal/noise) for whole milk. For 6 samples of naturally contaminated nonfat dry and freeze-dried milk, the modified method gave an average result of 0.698 micrograms/L; the AOAC method gave an average result of 0.386 micrograms/L.