首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 45 毫秒
1.
汽车转弯自动照明控制系统数据采集滤波方法   总被引:1,自引:0,他引:1  
为了减少汽车转弯自动照明控制系统数据滤波处理中的延时,在滑动中值滤波方法基础上,提出了一种带补偿的限幅滑动中值滤波算法,通过补偿的方式跟随信号的变化趋势。该算法通过2个步骤完成滤波,先对数据进行带补偿方式的限幅处理,再进行滑动中值滤波处理。该算法综合了滑动中值滤波法的实时性以及限幅滤波法对偶然性干扰滤除的有效性,实现更准确的滤波。仿真与实测结果表明,与滑动中值滤波方法相比较,改进后的算法滤波能够实时地滤除数据中的干扰,处理时间可减少62%,滤波效果较好,且速度信号的数据滞后时间较短,实时性较高,满足系统设计要求。  相似文献   

2.
By analyzing shortages of current MSPCA model, an on line multi variable statistical process monitoring method is proposed, which uses some concepts from online multi scale filtering and can be applied to sensor fault diagnosis. In the method, wavelet decomposition is employed to the signals using edge correction filter in a fixed length data window, and then wavelet denoising is conducted with wavelet threshold filtering. Next, an on line multi scale model is constructed for data combining wavelet transformation and adaptive PCA in the previous data window. This model avoids time waste in direct signal denoising and reduces time cost in multi scale data with conventional PCA, which eventually increases accuracy in fault diagnosis. Experiments on eight vibration signals of 6135D diesel engine under severe leak condition prove the practicability and feasibility of the proposed method.  相似文献   

3.
The mass flowrate of Coriolis mass flowmeter in practical application has slow changes with time. To solve the problem, an improved time-varying signal model whose frequency, amplitude and phase are time-varying based on the random walk model is established firstly. A new algorithm of adaptive notch filter with the capability of tracking frequency variation is applied to filter the sensor output signal of Coriolis mass flowmeter and its frequency is calculated next. An adaptive line enhancer based on the mentioned notch filter extracts fundamental frequency signal from noisy data. Then, by short window intercepting, the revised sliding DTFT recursive algorithm is introduced to calculate the real-time phase difference between two enhanced signals. With the frequency and phase difference obtained, the time interval between the two signals is calculated and then the mass flowrate is derived. The simulations and field test results show that the proposed method can not only track the change of frequency and phase, but also ensure the calculation accuracy when measuring small phase difference. The computational load of the algorithm is simple so that it can be applied to real-time signal processing for Coriolis mass flowmeter.  相似文献   

4.
Considering the difficult of acquiring and transmission the signal from the moving equipment, a new fault diagnosis monitoring system is presented. The system acquires the state signal from the moving equipment by data acquisition module that based in W77E58 high-speed SCM, and transmits the data fast by wireless mode. The signal data can be use for fault diagnosis and precise analysis. The system has the ability for acquiring abundance of data with a high speed, the ability for high accuracy data conversion, and has a function of programme controlling gain and programme controlling low-pass filtering. The successful application of this system on the vibration monitor about the material-transporting bogie in an iron works of a domestic steel enterprise proves the stability and credibility about the design project, also testifies its practical value and versatility.  相似文献   

5.
Several kinds of microphone developed via silicon Micro Electro Mechanical System (MEMS) processes in recent years are investigated in this paper. The analysis and research of the merits and demerits of them show that: these conventional microphones mainly function as acoustic electric converters; the filtering against noise is implemented by a special filter circuit or a digital filter. Therefore, a design method for silicon micro array filter microphone is presented, where the filtering is achieved while converting signals. The effects of damping, silicon reed number and sensor element pair on dynamic characteristic are discussed; it follows that: Increasing damping can reduce microphone's sensitivity, while increasing silicon reed number can improve the sensitivity curve, furthermore, the implementation of the filter function is simultaneous with acquiring of the noise signal.  相似文献   

6.
An improved Sage-Husa adaptive filter algorithm is proposed based on the existing methodologies in light of the complex and changing environment of the industrial online measurement. This algorithm,after a new observed value is obtained,first judges whether the filter is in a normal state by the filtering divergence criterion,if not,it judges whether the new observed value is an outlier and takes countermeasures varying with the judgment so as to improve the performance of the Sage-Husa algorithm in industrial measurement. The result indicates that compared with traditional methodologies,this new algorithm is applicable to measure the location of the center point of laser beam in a simulated industrial environment,makes accurate judgment about the system status,features better precision,practicality and robustness and thus can satisfy the requirements of industrial online measurement.  相似文献   

7.
Helmholtz coils produce uniform sinusoidal magnetic field in the center region, and the direction of magnetic field is approximate straight line, to help simplify the complexity of inverse problems. The simulation models of an 8-channel magnetic induction tomography measurement system are built, reconstructing conductivity distribution with filtered back projection algorithm. In the filtered back projection algorithm, the detected data is supplemented by the linear interpolation first, and then filtered by the Hamming filter, while adding a window filter to reduce the impact of around the coil from the divergence of the magnetic field. The different noise ratio of noise is added in the detected data to test noise suppression ability of the algorithm. The experiment results show that this filtered back projection algorithm can reconstruct the conductivity distribution under this model.  相似文献   

8.
An improved Mean shift based rocket target tracking algorithm is presented. The traditional Mean shift tracker is difficult in tracking fast moving rocket target and suffers in cumulating error. To overcome the limitation of the traditional Mean shift tracking algorithm, three frame difference method is employed to detect the rough position of rocket target. Based on the rough position, Mean shift algorithm is used to achieve precise tracking. Simulation experiments show that the proposed algorithm can effectively track fast moving rocket target and overcome the tracking error cumulating problems.  相似文献   

9.
A pipelined FFT processor designed for fast and real-time requirements with FPGA is introduced. This FFT processor can be used to real-time frequency analysis and its working frequency can reach to 75 MHz. The leakage error is reduced through multiply the sampled signal by a weighting window. In order to improve FFT's working frequency and economize FPGA resources, an algorithm of 1024-point complex to compute 2048-point real data is adopted. In addition, an approximate algorithm to compute module value of complex number is introduced.  相似文献   

10.
A method of realizing wavelet transform with linear analog filter is proposed. It shows another new way of obtaining fast wavelet transform. It has also given out a procedure of constructing such a filter network and verified by the Mexican hat Wavelet.  相似文献   

11.
The principle and method of the adaptive filter and the filtering with wavelet transform were analyzed, and the model and method of adaptive filtering with wavelet transforms for the transient signal was established. The separated noise of signal by the multi-scale decomposition of wavelet transforms, was the input signal of adaptive filter, and accordingly the optimal filtering method of signal-noise decomposition was realized. By the adaptive filter grou Pbased on the wavelet transform, the optimal filtering to the multi-noise of signal is achieved at the same time, and the method presented in this paper has the excellent filtering capability. Examples of application demonstrate that this method presented is excellent to realize the optimal estimate to the valuable signal and noise of the transient signal in the same frequency segment.  相似文献   

12.
A novel signal processing method for Coriolis mass flowmeter is proposed based on time-varying signal model. First, an adaptive lattice notch filter is applied to filter the output signal, whose frequency, amplitude and phase are time-varying based on the random walk model, of Coriolis mass flowmeter to get its frequency and enhanced signal. Then, by short window intercepting, the DTFT algorithm with negative frequency contribution is introduced to calculate the real-time phase difference between two enhanced signals. With the frequency and the phase difference, the time interval between two signals is calculated. Simulation results show that the proposed method is efficient. Furthermore, the computation of algorithms is simple so that it can be applied to real-time signal processing for Coriolis mass flowmeter.  相似文献   

13.
基于近红外透射光谱分析技术的小麦蛋白质含量测定   总被引:1,自引:0,他引:1  
近红外分析技术具有快速、简便、准确、非破坏性的优点,为小麦品质检测提供了一个新的技术手段。笔者首先对光谱数据进行移动窗口平均平滑和马氏距离筛选,在以上光谱预处理基础上,建立了小麦籽粒蛋白的偏最小二乘校正模型。仿真试验结果表明:该模型能够较准确地预测小麦蛋白质的含量,预测相关系数、预测均方误差和平均相对误差分别为0.9809、0.1130、1.973%。与用原始数据所建校正模型相比,预测效果显著提高。  相似文献   

14.
A single sample face recognition algorithm based on B-spline and image gradient is proposed. Image gradient method for face recognition has advantage of illumination invariant. But the recognition rate will be greatly decreased when the image contains noise which will seriously influence gradient information. Traditional methods to reduce noise smooth image at the same time and image gradient reorganization rate will be reduced. As the B-spline filter has the feature which can adjust the order, B-spline filter with different orders can be selected according to the image noise value to minimize noise while preserve image gradient information. Experiments prove that using B-spline and image gradient algorithm can achieve a better recognition rate than traditional filtering method on single sample face recognition problem.  相似文献   

15.
Digital Filtering with Zero Phase Error   总被引:2,自引:0,他引:2  
Aiming at the problem of phase error caused by normal filters in signal processing , summarizes the important meaning of digital filtering with zero phase error. Puts forward RRF Filtering which is a new way to realize digital filtering with zero phase error through reversing the time serials of the signal. Another way to realize digital filtering with zero phase error is suggested through reversing the time serials of normal filter. Testifies the way to realize digital filtering with zero phase error. Points out how to design the digital filter with zero phase frequency peculiarity. Solves the problem of phase error in DSP.  相似文献   

16.
A new image denoising algorithm based on the complex direction of filter bands and BlockShrink is proposed. The image is decomposed based on the complex direction of filter bands to obtain the coefficients. Then, according to the coefficient correlation, the block threshold method is used to select the best block size and the threshold. In this way, the unbiased risk estimation of each sub-band is minimized. The algorithm is entirely data-driven easy to implement and with good visual effects. Experiments show that the proposed algorithm increase the PSNR by 0.6 percent compared with the algorithm based on DWT-BlockShrink transform, and the edge and countour information are more clearly.  相似文献   

17.
Multi-target tracking is a hot topic of current research on wireless sensor networks (WSN). Based on adaptive sampling interval, we propose a multi-target tracking algorithm in order to save energy consumption and prevent tracking lost for WSN. We contrast the targets moving model by using the position metadata, and predicte the targets moving status based on extended Kalman filter (EKF).we adopt the probability density function (PDF) of the estimated targets to establish the tracking cluster. By defining the tracking center, we use Markov distance to quantify the election process of the main node (MN). We comput targets impact strength through the targets importance and the distance to MN node, and then use it to build tracking algorithm. We do the simulation experiment based on MATLAB, and the experiment results show that the proposed algorithm can accurate predict the trajectory of the targets, and adjust the sampling interval while the targets were moving. By analyzing the experiments data, we know that the proposed algorithm can improve the tracking precision and save the energy consumption of WSN obviously.  相似文献   

18.
Although there are modifying modules in the most CAD software, the parameters of entire curve must be computed again as the tiny local curve changed. The modification are not local and spending long time and difficult as the eurve is complex or large. A method can be applied to engineering designer easily has been proposed. There are only four segments have been ehanged along with the moving of a given point, and the speed is fast. It ean be used to CAD software and generalize the method to surface easily.  相似文献   

19.
For requirements of suppressing harmonics on the dc side of HVDC system,a new hybrid filtering system a shunt passive and a small rated reactor transformer coupling series active filter is presented,and the harmonic compensation and control principles are discussed theoretically in this paper.Digital simulation results show excellent filtering characteristics of harmonic current and very high performance/cost by using a new hybrid filtering system proposed int this paper.  相似文献   

20.
A section algorithm of reliability evaluation for complex medium voltage Electrical Distribution Networks (EDNs) using adjacency multilist (AM) is proposed. The constructing method for AM is introduced. The AM can be used to store the structure data of EDNs and to solve the problem of space & time complexity. A new power flow algorithm of backward / forward sweep is proposed and a fast algorithm of forming sections in distribution network is put forward. The proposed algorithm makes a perfect combination of the power flow algorithm and the section algorithm of reliability evaluation, which makes efforts to decrease the work of programming and saves the computing time. Applying the proposed algorithm in RBTS-BUS6 system and actual EDNs, the reliability assessment results show that the algorithm has an advantage of saving time and possesses efficiency in engineering practicality.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号