Grain boundary scars and spherical crystallography

We describe experimental investigations of the structure of two-dimensional spherical crystals. The crystals, formed by beads self-assembled on water droplets in oil, serve as model systems for exploring very general theories about the minimum-energy configurations of particles with arbitrary repulsive interactions on curved surfaces. Above a critical system size we find that crystals develop distinctive high-angle grain boundaries, or scars, not found in planar crystals. The number of excess defects in a scar is shown to grow linearly with the dimensionless system size. The observed slope is expected to be universal, independent of the microscopic potential.     

A dynamic grain flow model for a mass flow yield sensor on a combine

A model is developed to describe the flow of grain through a clean grain elevator system on a combine in order to facilitate accurate mass flow rate estimation. The relationship between mass flow rate and impact force described by the model depends upon machine operational characteristics, mechanical interactions of the grain and the machine geometry, and material properties of the grain. The model was designed to be adaptable to varying grain conditions, such as those influenced by moisture content, by allowing free parameters of the model to be estimated through a nonlinear regression algorithm. Simulations were performed using discrete element modeling software and data was obtained from experiments conducted on a clean grain elevator system at the University of Kentucky Combine Yield Monitor Test Facility to determine the ability of the model to accurately estimate mass flow rate. The model estimated mass flow rate with a normalized root mean squared residual (NRMSR) less than 2% for discrete element modeling simulations. For experiments involving machine components, NRMSR values were less than 3% for corn at 14% moisture, less than 3% for corn at 21% moisture, and less than 5% for corn at 26% moisture.     

非线性光学晶体KTiOPO4(KTP)的缺陷研究

利用同步辐射白光X射线形貌术和化学腐蚀法,研究了熔盐法和水热法生长的KTP晶体中的缺陷.其中熔盐法生长KTP晶体分别采用固相和液相2种方法合成生长的原料.实验结果发现KTP晶体中的生长扇形界、生长条纹和位错等缺陷.     

Premelting at defects within bulk colloidal crystals

Premelting is the localized loss of crystalline order at surfaces and defects at temperatures below the bulk melting transition. It can be thought of as the nucleation of the melting process. Premelting has been observed at the surfaces of crystals but not within. We report observations of premelting at grain boundaries and dislocations within bulk colloidal crystals using real-time video microscopy. The crystals are equilibrium close-packed, three-dimensional colloidal structures made from thermally responsive microgel spheres. Particle tracking reveals increased disorder in crystalline regions bordering defects, the amount of which depends on the type of defect, distance from the defect, and particle volume fraction. Our observations suggest that interfacial free energy is the crucial parameter for premelting in colloidal and atomic-scale crystals.     

LIQUID CRYSTALS: New Banana Phases

Liquid crystals-materials that flow like a fluid but are optically anisotropic like a crystal-exhibit large responses to modest external disturbances. In his Perspective, Lubensky discusses the advances reported in two papers in this issue, both of which involve liquid crystals made from V-shaped or bent-core molecules. Walba et al. report a synthetic strategy for producing a ferroelectric phase from achiral bent-core molecules. Pratibha et al. show that new liquid crystalline phases form when bent-core molecules are mixed with a particular class of rodlike molecules. These papers introduce new molecular designs that yield new liquid crystalline phases with controlled structure and properties.     

Alignment of liquid crystals with patterned isotropic surfaces

The molecules of a nematic liquid crystal exposed to an isotropic surface adopt a mean tilt relative to the normal but have no in-plane alignment-that is, they are free to have any azimuthal orientation in the surface plane. Pursuing the theoretical suggestion by Meyer that, in spite of this azimuthal degeneracy, spatially inhomogeneous isotropic surfaces combine with liquid crystal elastic anisotropy to produce alignment, we show that a boundary line between two isotropic regions that differ in mean tilt does indeed align the liquid crystal. The boundaries on a patterned surface of distinct isotropic regions thus act as a system of lines that the molecular orientation locally follows. This enables the development of liquid crystal alignment surfaces based on printing or lithographic patterning.     

红宝石无核×红旗特早葡萄杂交后代核性状遗传分析

【目的】研究红宝石无核×红旗特早葡萄杂交后代核性状遗传规律。【方法】以红宝石无核×红旗特早杂交群体135个F₁代植株为试材,鉴定核状态,测定果实单粒重、单核重、单粒核数量、单核纵横径积等核相关指标,分析群体核性状遗传倾向。【结果】红宝石无核×红旗特早杂交群体胚败育率为59.26%;果实单粒重表现为连续分布,遗传力低,呈现变小趋势;果实单核重在有核和无核单株群体之间存在两极分化,但没有明显界限,遗传力低,呈现变小趋势;果实单粒核数量遗传力低,呈现变少趋势,整个组合91.85%的单株具有败育残核;单核纵横径积在有核和无核单株群体之间存在两极分化,且有明显界限,遗传力低,呈现变小趋势,但在有核单株中表现增大趋势。【结论】红宝石无核与具有无核倾向的有核品种红旗特早杂交,可以获得较高比例的无核后代,群体在果粒质量、核质量、数量及纵横径积等指标上均表现为退化趋势,但在无核单株与有核单株群体之间存在一定差异,果粒质量、核质量、数量及纵横径积与核性状正相关联。     

Surface pinning as a determinant of the bulk flux-line lattice structure in copper oxide superconductors

Direct knowledge of crystal defects and their perturbation of magnetic flux lines is essential to understanding pinning and to devising approaches that enhance critical currents in superconductors with high critical temperatures (T(c)). Atomic force microscopy was used to simultaneously characterize crystal defects and the magnetic flux-line lattice in single crystals of Bi(2)Sr(2)CaCu(2)O(8). Images show that surface defects, which are present on all real samples, pin the flux-line lattice. Above a critical height, the pinning interaction is sufficiently strong to form grain boundaries in the bulk flux-line lattice. These results elucidate the structure of the defects that pin flux lines and demonstrate that surface pinning, through the formation of grain boundaries, can determine the bulk flux-line lattice structure in high-T(c) materials. The implications of these results to the bulk flux-line lattice structure observed in previous experiments and to enhancing critical currents are discussed.     

Colloidal hard-sphere crystal growth frustrated by large spherical impurities

Impurities affect the nucleation, growth, and structure of crystals. Here we report the effect of large, spherical, polymethylmethacrylate impurities on the crystal growth of monodisperse, hard, polymethylmethacrylate colloids in a density- and optically matching apolar solvent mixture. Crystal growth, initiated at the bottom of the sample, was studied by imaging sequences of two-dimensional xy slices in the plane of the impurity's center with a laser scanning confocal microscope. Impurities form the center of grain boundaries, and a single fluid particle layer around the impurity persists in all cases. The growth rate sensitively depends on the impurity's size. Crystal growth is inhibited to a greater extent near smaller impurities, pointing to local crystal frustration induced by the curvature of the impurity.     

热泵驱动的溶液除湿在谷物就仓干燥中的应用

为安全且高效地实现粮食干燥储存,设计了一套基于热泵驱动的溶液除湿谷物就仓干燥系统,并建立了系统中各部件及谷物就仓干燥数学模型.模拟了南昌地区秋季初始含水率为22％、初始温度为20℃的200 t谷物就仓干燥至安全水分的过程.分析了溶液除湿系统干燥中风量对系统干燥时间及耗能的影响,得出耗能最低的最佳通风量;提出自然通风与溶...     

Ferroelectric columnar liquid crystal featuring confined polar groups within core-shell architecture

Ferroelectric liquid crystals are materials that have a remnant and electrically invertible polar order. Columnar liquid crystals with a ferroelectric nature have potential use in ultrahigh-density memory devices, if electrical polarization occurs along the columnar axis. However, columnar liquid crystals having an axial nonzero polarization at zero electric field and its electrical invertibility have not been demonstrated. Here, we report a ferroelectric response for a columnar liquid crystal adopting a core-shell architecture that accommodates an array of polar cyano groups confined by a hydrogen-bonded amide network with an optimal strength. Under an applied electric field, both columns and core cyano groups align unidirectionally, thereby developing an extremely large macroscopic remnant polarization.     

Reconstruction of Current Flow and Imaging of Current-Limiting Defects in Polycrystalline Superconducting Films

Magneto-optical imaging was used to visualize the inhomogeneous penetration of magnetic flux into polycrystalline TlBa2Ca2Cu3Ox films with high critical current densities, to reconstruct the local two-dimensional supercurrent flow patterns and to correlate inhomogeneities in this flow with the local crystallographic misorientation. The films have almost perfect c-axis alignment and considerable local a- and b-axis texture because the grains tend to form colonies with only slightly misaligned a and b axes. Current flows freely over these low-angle grain boundaries but is strongly reduced at intermittent colony boundaries of high misorientation. The local (<10-micrometer scale) critical current density Jc varies widely, being up to 10 times as great as the transport Jc (scale of approximately 1 millimeter), which itself varies by a factor of about 5 in different sections of the film. The combined experiments show that the magnitude of the transport Jc is largely determined by a few high-angle boundaries.     

F-actin and microtubule suspensions as indeterminate fluids

The viscosity of F-actin and microtubule suspensions has been measured as a function of shear rate with a Weissenberg rheogoniometer. At shear rates of less than 1.0 per second the viscosity of suspensions of these two structural proteins is inversely proportional to shear rate. These results are consistent with previous in vivo measurements of the viscosity of cytoplasm. This power law implies that shear stress is independent of shear rate; that is, shear stress is a constant at all shear rates less than 1.0 per second. Thus the flow profile of these fluids is indeterminate, or nearly so. This flow property may explain several aspects of intracellular motility in living cells. Possible explanations for this flow property are based on a recent model for semidilute suspensions of rigid rods or a classical friction model for liquid crystals.     

Three-dimensional hydrogen microscopy in diamond

A microprobe of protons with an energy of 17 million electron volts is used to quantitatively image three-dimensional hydrogen distributions at a lateral resolution better than 1 micrometer with high sensitivity. Hydrogen images of a <110>-textured undoped polycrystalline diamond film show that most of the hydrogen is located at grain boundaries. The average amount of hydrogen atoms along the grain boundaries is (8.1 +/- 1.5) x 10(14) per square centimeter, corresponding to about a third of a monolayer. The hydrogen content within the grain is below the experimental sensitivity of 1.4 x 10(16) atoms per cubic centimeter (0.08 atomic parts per million). The data prove a low hydrogen content within chemical vapor deposition-grown diamond and the importance of hydrogen at grain boundaries, for example, with respect to electronic properties of polycrystalline diamond.     

Spatially Resolved Observation of Supercurrents Across Grain Boundaries in YBaCuO Films

Spatially resolved resistivity measurements of current transport across individual grain boundaries have been made on superconducting YBa(2)Cu(3)O(7). These experiments were done by low-temperature scanning electron microscopy with a resolution of 1 to 2 micrometers, and they show directly the limitation of the critical current density caused by grain boundaries in YBa(2)Cu(3)O(7). Furthermore, complex spatial patterns of the current transport across grain boundaries were observed. These patterns reflect self-excited resonances of the grain boundaries and are closely correlated to the unexplained "sub-gap structure" in the current-voltage characteristics of polycrystalline YBa(2)Cu(3)O(7).     

Observation of atomic diffusion at twin-modified grain boundaries in copper

Grain boundaries affect the migration of atoms and electrons in polycrystalline solids, thus influencing many of the mechanical and electrical properties. By introducing nanometer-scale twin defects into copper grains, we show that we can change the grain-boundary structure and atomic-diffusion behavior along the boundary. Using in situ ultrahigh-vacuum and high-resolution transmission electron microscopy, we observed electromigration-induced atomic diffusion in the twin-modified grain boundaries. The triple point where a twin boundary meets a grain boundary was found to slow down grain-boundary and surface electromigration by one order of magnitude. We propose that this occurs because of the incubation time of nucleation of a new step at the triple points. The long incubation time slows down the overall rate of atomic transport.     

气液两相流的混输泵扬程计算

针对两相流中分相流下混输泵的扬程计算方法,在分相流模型下计算泵扬程时假设气相和液相有各自的速度,且相间无能量传递,可能有质量转移,为此,泵提供给流体的扬程可分为两部分,一部分提供给液体,另一部分提供给气体,同时假设泵进口到出口过程中为等温变化.在计算泵提供给气体的扬程时给出了三种算法,并对实例计算结果进行了分析比较.     

管道水力摩阻系数的计算

介绍了计算机水力摩阻系数λ的通用公式,在分析现有计算摩阻系数公式的基础上,借助于专门的过渡函数,求出了新的通用式。     

Dimples on nanocrystalline fracture surfaces as evidence for shear plane formation

Tensile experiments of fully dense nanocrystalline structures with a mean grain size of less than 100 nanometers demonstrate a considerable increase in hardness but a remarkable drop in elongation-to-failure, indicating brittle behavior. However, dimple structures are often observed at the fracture surface, indicating some type of ductile fracture mechanism. Guided by large-scale atomistic simulations, we propose that these dimple structures result from local shear planes formed around clustered grains that, because of their particular misorientation, cannot participate in the grain boundary accommodation processes necessary to sustain plastic deformation. This raises the expectation that general high-angle grain boundaries are necessary for good ductility.     

Observations of intergranular stress corrosion cracking in a grain-mapped polycrystal

Nondestructive three-dimensional mapping of grain shape, crystallographic orientation, and grain boundary geometry by diffraction contrast tomography (DCT) provides opportunities for the study of the interaction between intergranular stress corrosion cracking and microstructure. A stress corrosion crack was grown through a volume of sensitized austenitic stainless steel mapped with DCT and observed in situ by synchrotron tomography. Several sensitization-resistant crack-bridging boundaries were identified, and although they have special geometric properties, they are not the twin variant boundaries usually maximized during grain boundary engineering.