Estimated stocks of organic carbon in mangrove roots and sediments in Hinchinbrook Channel,Australia

Aboveground and belowground root biomasses (Babove and Broot) were measured for young, isolated Rhizophorastylosa on Iriomote Island, Japan. The relationship between these two parameters was significant and given as the equation, Broot(g dry weight) = 0.394 × Babove(g dry weight) – 485 (r = 0.986). Multiple regression analyses also revealed good correlation between diameter and biomass of prop roots (Dprop and Bprop) and between prop root and root biomasses. Consequently, root biomass could be estimated from the measurements of diameter and biomass of prop roots using the multiple regression equation, Broot(g dry weight) = 80.0 ×Dprop(cm) + 0.86 ×Bprop (g dry weight) – 251. The relationship between DBH (diameter at breast height) and prop root biomass was also adequately described using an allometric equation.In Hinchinbrook Channel, Australia, redox potential (measured as Eh) and organic carbon stocks in the top 5cm of mangrove sediments were measured along a 600m transect from the frequently inundated, Rhizophora dominated zone on the creek edge, towards higher grounds, where Ceriops spp. became increasingly dominant. Eh values were about –60mV near the creek edge and increased to 260mV on higher grounds. Organic carbon stocks showed an opposite trend to Eh, with the values decreasing from about 360tCha–1 to 160tCha–1. At 18 sites, representing six different habitats, organic carbon stocks were also measured along with the DBH of mangrove trees. DBH was converted into aboveground biomass and then into root biomass using the equations obtained in the study on Iriomote Island. The average organic carbon stocks in the top 50 cm of sediments, aboveground biomass and root biomass were 296tCha–1, 123 tCha–1 and 52 tCha–1, respectively, and accounted for 64%, 25% and 11% of the total organic carbon stock.     

Mangrove structure,litter and macroalgal productivity in a northern‐most forest of Florida

Rhizophora mangle L. dominated 10 overwash islands within Tampa Bay forming the northernmost mangrove forests on the west coast of Florida. The mean number of trees and basal area were 5040 trees ha^-1 and 20.5m²ha^-1, respectively. Basal areas ranged from 1.1 (Avicennia germinans (L.) Stern), to 2.6m²ha^-1 (Laguncularia racemosa Gaertner), to 16.8 (R. mangle). Cockroach Bay mangroves are small (5.8–7.0m tall) versus coastal forests of south Florida and the Caribbean. Total litter production for a 12 month period was maximal in September for fringing (7.4gdwtm^-2d^-1) and interior (8.7gdwtm^-2d^-1) areas with the two zones not being significantly different. Average litter fall (3.1gdwtm^-2d^-1) was similar to more tropical Caribbean mangals. Leaves accounted for 68 of the litter and reproductive material for 6, being similar to tropical riverine and overwash marine angiosperm communities on the Mexican coast. Although mangrove forests in Tampa Bay are small in stature and experience cold damage and occasional frosts, their litter fall is similar in biomass to that of more tropical mangals. However, their reproductive output is low based on litter fall versus more tropical mangals suggesting that the northern extension is less than optimum. Macroalgal diversity was low (10 species) as compared to Caribbean mangals. Macroalgal turf (0.8gCm^-2d^-1) and epiphyte communities of A.germinans pneumatophores (2.7gCm^-2d^-1) have productivity levels that are equal to or greater than those of Caribbean mangals.     

Concentration and molecular weight distribution of dissolved organic carbon in a mangrove creek in the Hinchinbrook area,Australia

The concentration and molecular weight distribution of dissolved organic carbon (DOC) are reported for a mangrove creek in the Hinchinbrook area, Australia. DOC concentration ranged from 1.0mg Cl–1 near the creek mouth to 2.2mg Cl–1 at the innermost part of the creek. There was no apparent spatial trend in molecular weight distribution of DOC, with a >300gmol–1 fraction accounting for about 70% of the total in all samples. DOC concentration fluctuated between 0.5 and 1.2mg Cl–1 over one tidal cycle. The samples collected at low tide and during the rising tide were dominated by DOC of >300gmol–1 and <300gmol–1, respectively. This suggested the export of high molecular weight DOC, probably originating from litter leachates, and the import of low molecular weight DOC to the creek.     

Changes in the physical and chemical properties of six Japanese softwoods caused by lengthy smoke-heating treatment

The effects of prolonged smoke-heating treatments on wood quality were investigated. Six Japanese softwoods were smoke-heated for 100 and 200h at a temperature of 75° ± 5°C, which was recorded inside the log. After smoke heating, wood quality, including moisture content, amounts of chemical components, relative degree of crystallinity (RDC) of cellulose, and sapwood color were examined. Moisture content decreased as a result of smoke heating, especially in sapwood, leading to a uniform distribution of moisture content within a log. Almost no difference was found in the amounts of chemical components between the control woods and the woods that were smoke-heated for 100h. However, in the wood that was smoke-heated for 200h, the amounts of holocellulose decreased, suggesting that thermal deterioration and/or degradation of hemicelluloses had occurred. We assume that the increase in RDC was caused by smoke heating with the crystallization of cellulose and/or thermal degradation of hemicelluloses. Almost no differences were found in sapwood color between the control woods and the woods that were smoke-heated for 100h. In the wood that was smoke-heated for 200h, however, L*decreased, whereas a* and b* increased. As a result, E*ab, showing the total color change, increased, resulting in a deeper color. These results suggest that thermal degradation of hemicelluloses was caused by smoke heating for over 100h. Therefore, smoke heating of softwood logs using a commercial-scale kiln should not exceed 100h.     

Sediment mixing and accumulation in a mangrove ecosystem: evidence from 210Pb, 234Th and 7Be

210Pb, 234Th and 7Be activities were measured to establish sediment accumulation rates, estimate sediment mixing rates, and determine the depth of the sediment mixed layer in the Sepetiba Bay mangrove ecosystem near Rio de Janeiro City, Brazil. Three sediment cores were collected from Enseada das Garças, a typical exposed tidal flat region with a sequence of sedimentary features. The seaward edge of this sequence is a mud flat with the landward portion covered with Spartina alterniflora followed by mangrove vegetation. An additional core was collected on an overwash island near Barra de Guaratiba, which is cover with mangroves without a mud flat or Spartina alterniflora sequence. Sediment accumulation rates were determined to range up to 1.8cm/yr with the Spartina alterniflora having the maximum rate. Mixing rates were estimated for the Spartina alternifloracore at 40cm2/yr based on 210Pb and 7Be from the upper mixed region of the core. The 234Th activity in this core suggested that either mixing or the input of 234Th were not in steady state. The sediment mixed region depth ranged from 4cm to greater than 30cm. At the Enseada das Garças site the mixing depth decreased in the landward direction (i.e. mud flats > 30cm, Spartina alterniflora 11cm, mangroves 4cm). Along with this decrease in sediment mixing depth was a shift from physical to biological mixing. The Barra de Guaratiba core had a sediment mixed layer of 13cm as a result of physical and intense biological activity.     

Physiological and psychological responses to a heavy floor-impact sound generated by dropping an automobile tire in a wooden house

We investigated the physiological and psychological responses of ten healthy male volunteers to a single heavy floor-impact sound generated by dropping an automobile tire from heights of 50, 100, and 150cm in a wooden house. Blood pressure and peripheral blood flow were measured simultaneously, and sensory evaluation was conducted using the semantic differential method. The results obtained were as follows: (1) the systolic blood pressure increased and the peripheral blood flow decreased when the subjects heard the heavy floor-impact sound; (2) the heavy floor-impact sound caused the subjects to feel uncomfortable, but there was no significant change in sharp and monotonous feelings; and (3) for the heavy floor-impact sound for 100cm and that for 150cm, the subjects showed no difference in comfortable feeling, but we detected differences in the variations of both the systolic blood pressure and the peripheral blood flow.Part of this research was presented at the 48th Annual Meeting of the Japan Wood Research Society, Shizuoka, April 1998.     

Preparation of liquid polyesterpolyols from glucose and its methyl derivative

Preparation of liquid polyols from d-(+)-glucose (Glc) and its derivative, methyl--d-glucoside (m-Glc), has been studied. Direct reaction of -caprolactone (CL) with Glc (CL:Glc = 2:1–5:1 in weight ratio) at 150°C using tin(II) 2-ethyl hexanoate (SnEht₂) (series A), in which melted Glc was suspended in CL, resulted in a dark-brown coloration of the reactants. The reaction was accompanied by formation of high molecular weight resins, a pH drop, production of water, and a considerable decrease in the hydroxyl value from the theoretically expected one. In the case of Glc/ethylene glycol (EG)/CL reaction system with SnEht₂ catalyst at 150°C (series B), in which the weight ratio of Glc to EG was fixed at 1:1, Glc dissolved in the EG/CL mixture, but the brown coloration of the reactant mixture still occurred. In this case, the formation of water was enhanced, but the other effects found in series A were suppressed to a considerable extent. In the m-Glc/CL/SnEht₂ reaction system (series C), in which m-Glc reacted with two to five times weight amounts of CL under the same conditions adopted in series A, development of the color, the production of high molecular weight materials and water, and the changes in pH and hydroxyl value were not observed. These results are discussed based on the chemical structural differences: Glc exists mostly in the hemiacetal form, but tautomerizes to the aldehyde, whereas m-Glc is an acetal and is protected from reversion to the aldehyde.     

Effects of nitrogen and phosphorus fertilization on the growth and nutrition of hybrid poplars on Vancouver Island

The effects of nitrogen (N) and phosphorus (P) rates, P source, and method of P application were tested on growth and nutrition of four clones of hybrid poplar (Populus trichocarpa Torr. & Gray×P. deltoides Bartr. ex Marsh or P. trichocarpa×P. maximowiczii A. Henry) in a plantation on Vancouver Island. Treatments were applied shortly after planting. Nitrogen (0, 500kgNha^–1) was supplied as ammonium sulfate (AS); half of the AS was added at the start of the second growing season. Phosphorus (0, 100, 200kgPha^–1) was supplied as triple super phosphate (TSP), rock phosphate (RP), or diammonium phosphate (DAP) and banded or broadcast. Over four growing seasons, stem volumes increased with AS and P additions. The effects of AS and P each were greatest when the other was also added. Volume was greater when P was applied at 100kgha^–1 than in the P control and did not significantly increase further at 200kgPha^–1. Phosphorus additions were more effective when added as TSP or DAP than when added as RP, but only in P100 and when banded. Banding increased volume when P was applied at 200kgha^–1, but increases were significant only for DAP fertilized trees. Roto-tilling associated with the banding treatment also increased volume when AS and P were not added. Rankings of clones with respect to stem volume varied with N supply and changed over time.     

Gamma radiation sensitivity of larvae and adults of the red flour beetle, <Emphasis Type="Italic">Tribolium castaneum</Emphasis> Herbst

In this study, the susceptibility of larvae and adults of Tribolium castaneum (Herbst) to gamma radiation was investigated in the laboratory in Turkey. Gamma radiation was applied at 6 dose levels between 20 and 200Gy to 13–15day-old adults and at 5 dose levels between 20 and 180Gy to 18–20day-old larvae of T. castaneum. All experiments were performed in growth chambers maintained at 27±1°C and 70±5% r.h. The larvae proved to be the more susceptible stage, survival to the adult stage being prevented by exposure of the eggs to 100Gy; the adult stage was less susceptible. LD₅₀ and LD₉₉ values were determined as 19,75 and 42,97Gy for larvae and 33,21 and 64,50Gy for adult stage, respectively. It was concluded that 100Gy is the effective dose for both larval and adult stages.     

Effects of soil solarization on nematodes in Croatia

For the first time soil solarization was investigated in Croatia both in the field and in the greenhouse in 1991, 1992, 1993 and 1994. For two months (July and August), the soil was mulched with transparent polyethylene (PE) sheets of 0.015 or 0.050mm thickness. Soil temperatures at depths of 5, 10 and 20cm were recorded daily. In order to assess nematode population densities, soil samples were analysed before mulching and at the end of the mulching treatment. The results of these experiments showed that soil solarization drastically reduced the population of plant-parasitic nematodes (Meloidogyne, Pratylenchus, Paratylenchus, Tylenchus, Tylenchorhynchus spp.) by about 97–100% at a depth of 10cm and 92–97% at a depth of 20cm in the field, while in the greenhouse, the population of plant-parasitic nematodes was reduced by about 89–100% at a depth of 10cm and 98–100% at a depth of 20cm.In the same experiments, the population of saprophytic nematodes in the field was reduced by about 86–90% at a depth of 10cm and 72–89% at a depth of 20cm. In the greenhouse, the population of saprophytic nematodes was reduced by about 87–97% at a depth of 10cm and 87–93% at a depth of 20cm. This data shows that soil solarization was less effective in the control of saprophytic nematodes, which is considered to be an advantage.     

Mangrove forest productivity and biomass accumulation in Hinchinbrook Channel,Australia

Data on stand structure and rates of photosynthesis were used to estimate net canopy carbon fixation and carbon accumulation as living biomass in mangrove forests in Hinchinbrook Channel, Australia. Total annual canopy net carbon fixation was estimated to be about 29tCha–1yr–1. This equates to about 204,000tCyr–1 for all mangrove forests in Hinchinbrook Channel. Of this, only about 12% was stored as living plant biomass. Although it is not yet possible to present a robust carbon balance for mangrove trees, the remainder is presumably lost through plant respiration, litter fall, root turnover and exudation of organic compounds from roots.     

Sapling architecture and growth in the co-occurring species Castanopsis cuspidata and Quercus glauca in a secondary forest in western Japan

This study quantitatively compared the sapling (height 62–289cm) architecture and growth of Castanopsis cuspidata and Quercus glauca, both of which are major components in the temperate zone of western Japan, under shaded light conditions in secondary forest. When the sapling architectures were compared at the same support mass (trunk + branch mass), C. cuspidata had a larger crown area but a smaller height gain than did Q. glauca owing to the allocation of more biomass to lateral branches in C. cuspidata. The above-ground relative growth rate (RGR) of C. cuspidata (0.442gg^–1 year^–1) was nearly twice that of Q. glauca (0.256gg^–1year^–1), primarily as a result of a greater total leaf area per above-ground biomass (LAR) in C. cuspidata (56cm²g^–1) as compared to Q. glauca (33cm²g^–1). Because it has a disadvantage in height gain, related to its allocation pattern of biomass, C. cuspidata realized the same height growth (RGR_H) as Q. glauca, despite the large biomass production. The great potential for photosynthesis in C. cuspidata, which results from its vigorous lateral spreading, is presumed to give it a long-term advantage over Q. glauca in the shaded forest understory. Q. glauca invests preferentially in trunk biomass, possibly giving it an advantage in sunny sites as opposed to a shaded forest understory.     

Manufacture and mechanical properties of binderless boards from kenaf core

Binderless boards were prepared from finely ground powders of kenaf (Hibiscus cannabinus L.) core under varying manufacturing conditions. This research was designed to investigate their mechanical properties and evaluate the various manufacturing conditions: pressing temperature and time, pressing pressure, board density, board thickness, grain size of raw materials, and addition of furfural. The mechanical properties (i.e., modulus of rupture and elasticity, internal bonding strength) of boards increased with increasing board density and met the requirement for 15 type medium-density fiberboard (MDF) by JIS A 5905-1994. Thickness swelling and water absorption of boards exceeded the maximum permitted levels for 15 type MDF and S20 grade hardboard by JIS A 5905-1994, which indicates the low water-resistant property of binderless boards. In contrast to that in usual wood-based materials, internal bonding strength showed significant correlations with other board properties: modulus of rupture and elasticity, thickness swelling, and water absorption. We confirmed experimentally that the best manufacturing conditions proved to be as follows: pressing temperature 180°C, time 10min; pressing pressure 5.3MPa; board thickness 5mm; board density 1.0g/cm³; average grain size 53µm; and powder with no furfural content.Part of this paper was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002     

Sediment accretion and variability of sedimentological characteristics of a tropical estuarine mangrove: Kemaman, Terengganu, Malaysia

This paper reports on a study of accretion rate and sedimentological variability in a estuarine mangrove swamp. One hundred and sixteen stations were monitored for 2 years. In addition, surface sediment samples were collected at 52 stations during the months of May, June and July (1994) to represent the nonmonsoon sediments and November, December (1994) and January (1995) to represent the monsoon sediments. Results show that the accretion rate for the first year was 1.46±0.13cm/yr and 0.66±0.04cm/yr for the second year thus making the average accretion for the 2 years period to be 1.06cm/yr. The average accretion rate for the monsoon season (0.26 ± 0.04cm/month) was found to be significantly higher than the nonmonsoon season (0.12 ± 0.03cm/month). Nevertheless, the same is not true for the surface sediment characteristics. The sedimentological characteristics between the monsoon and the nonmonsoon sediments were not significantly different.     

In vitro propagation of <Emphasis Type="Italic">Oroxylum indicum</Emphasis> Vent. a medicinally important forest tree

In vitro propagation of Oroxylum indicum Vent. was carried out using cotyledonary node explants. Among the different types of cytokinins used for culture establishment, 6-benzyladenine exhibited the best response with higher concentrations (8.87µM or above) for inducing multiple shoots. Inclusion of indole-3-acetic acid (2.85µM) into 6-benzyladenine-supplemented medium triggered a high frequency of response as well as a proliferation of shoots. The best medium for proliferation was Murashige-Skoog (MS) medium with 6-benzyladenine (8.87µM) and indole-3-acetic acid (2.85µM). However, incorporation of gibberellic acid (1.44µM) was mandatory to enhance shoot elongation. Repeated subculturing of cotyledonary node and in vitro developed nodal segments in MS medium with 6-benzyladenine (4.44µM) at 4-week intervals resulted in continuous mass multiplication of shoots without any evidence of decline. Root induction was best (91.6%) when MS strength was reduced to one-quarter and combined with -naphthalene acetic acid (2.69µM) and indole-3-acetic acid (5.71µM), with a high survival rate (70–72%) of plantlets hardened in either soil rite or soil:sand:soil rite (1:1:2).     

The determination of the age and growth of SE Asian mangrove seedlings from internodal counts

The occurrence of periodic changes in the length of the internodes of the seedlings of SE Asian mangrove species (Rhizophora apiculata, Avicennia alba, and Sonneratia caseolaris) growing in the Pak Phanang estuary (Nakhon Si Thammarat, SE Thailand) was confirmed. The annual nature of these periodic changes was verified through comparisons with the observed average number of internodes produced by plants tagged for one year. The cycles in the sequence of internodal length of the seedlings had an average (± SE) period of 16.0 ± 0.78 internodes for Avicennia alba, 25.0 ± 1.2 internodes for Sonneratia caseolaris, and 8.29 ± 0.40 internodes for Rhizophora apiculata. These values are remarkably close to, and not significantly different (ttest, P > 0.05) from the average (± SE) annual number of internodes of 17.6 ± 0.8 for Avicennia alba, 28.8 ± 2.1 for Sonneratia caseolaris, and 8.03 ± 0.36 for Rhizophora apiculata produced in a year by tagged plants. In addition, the average (± SE) growth of the tagged plants was 0.39 ± 0.018cm day^-1 for Avicennia alba, 0.24 ± 0.015cm day^-1 for Sonneratia caseolaris, and 0.091 ± 0.0036cm day^-1 for Rhizophora apiculata. These estimates were very close to those (0.45 ± 0.06cm day^-1 for Avicennia alba, 0.32 ± 0.01cm day^-1 for Sonneratia caseolaris, and 0.13 ± 0.005cm day^-1 for Rhizophora apiculata) derived as the product of the mean number of internodes produced per day, calculated from the inferred number of internodes produced per year, and the mean length of the internodes of the plants. These findings indicate that the use of regular, annual changes in the length of the internodes of mangrove seedlings can be used reliably to determine their age and to estimate their growth rate.     

Soil physical and micronutrient changes following clearing of a tropical rainforest

One of the options for achieving an adequate food supply in tropical Africa is by bringing more land into production. This often requires clearing and developing new vegetation areas for agricultural production. In sub-Saharan Africa, large areas of forest are being cleared for cultivation without adequate knowledge as to the consequences of the clearing method employed. This study was therefore initiated to, among other objectives, assess the effects of some forest clearing methods on soil compaction, texture, and micronutrients. Treatments were the following five clearing methods: (1) mechanical (MC), (2) semi-mechanical (SMC), (3) slash and burn (manual) (SB), (4) mechanical – no planting (MCNP), and (5) slash and burn – no planting (SBNP). After clearing, we planted maize and cowpea in every other row during the first year, and planted maize and cassava during the second year in the plots of treatments 1–3. Changes in soil texture, bulk density, and exchangeable Fe, Zn, Mn, and Cu were determined. Soil bulk density increased (with depth) in all treatments from the intitial (0–15cm) level of 1.1gcm^–3 to between 1.27 and 1.39gcm^–3 2 years after clearing, with the highest levels occurring in the MC plots. This indicated that clearing was accompanied by soil compaction. Some changes were noted in soil textural composition, but these were not of practical significance. Exchangeable Mn, Fe, and Cu (0–15cm) decreased markedly after clearing, especially under MC in the first year. Zinc levels changed little during the study period. The decline in micronutrient levels was paralleled by a decline in soil organic carbon.     

Manufacture and properties of low-density binderless particleboard from kenaf core

Low-density binderless particleboards from kenaf core were successfully developed using steam injection pressing. The target board density ranged from 0.10 to 0.30g/cm³, the steam pressure used was 1.0MPa, and the steam treatment times were 7 and 10min. The mechanical properties, dimensional stability, and thermal and sound insulation performances of the boards were investigated. The results showed that the low-density kenaf binderless particleboards had good mechanical properties and dimensional stability relative to their low board densities. The board of 0.20g/cm³ density with a 10-min treatment time produced the following values: modulus of rupture 1.1MPa, modulus of elasticity 0.3GPa, internal bond strength 0.10MPa, thickness swelling in 24h water immersion 6.6%, and water absorption 355%. The thermal conductivity of the low-density kenaf binderless particleboards showed values similar to those of insulation material (i.e., rock wool), and the sound absorption coefficient was high. In addition, the boards are free from formaldehyde emission. Kenaf core appears to be a potential raw material for low-density binderless panels suitable for sound absorption and thermally resistant interior products.Part of this report was presented at the 52th Annual Meeting of the Japan Wood Research Society, Gifu, Japan, April 2002     

Nitrogen use by <Emphasis Type="Italic">Pinus densiflora</Emphasis> trees growing on a Mt. Fuji lava flow

To quantify the nitrogen (N) use by Pinus densiflora trees growing on an infertile lava surface, N pools, N requirement and N uptake through fine roots and N deposition from the atmosphere were estimated. The N requirement and the N uptake of fine roots were 55.5kgNha^–1year^–1 and 39.7kgNha^–1, respectively. Thus, the ratio of N uptake to N requirement of the fine roots was 71.5%. Including fine-root contribution, the total N requirement of the P. densiflora trees was 98.6kgNha^–1year^–1, and the total N uptake was 64.2kgNha^–1year^–1. Thus, the N uptake of the P. densiflora trees was 64.1% of the N requirement, indicating that P. densiflora trees growing on an infertile lava surface obtain some of their N from below-ground organic material layers every year and the contribution of N storage in trees for their growth is not any higher than indicated in previous reports that excluded fine-roots contribution. The wet N deposition of our research forest was only 5.8% of the N requirement of the P. densiflora trees and only 8.9% of the N uptake. Movement of the below-ground organic material layer N concentrations in the F- and L-layers coincides with needle development and fine-root growth, suggesting the possibility that P. densiflora trees extract N from the organic N of those layers for growth.     

Effect of thawing regime on growth and mortality of frozen-stored Norway spruce container seedlings planted in cold and warm soil

One-year-old frozen-stored Norway spruce (Picea abies (L.) Karst.) container seedlings were planted in a controlled environment providing an air temperature of 22°C and soil temperature of 9±1 or 18±1°C. At planting the root plugs were either frozen or had been thawing for 4 days at 9°C. During a 5-week growing period, in both cold and warm soil the root growth and height growth were less in frozen-planted seedlings than in thawed seedlings. In addition, frozen-planting delayed bud burst and increased mortality. Soil temperature, however, had no effect on bud burst or mortality. Low soil temperature retarded root growth of seedlings thawed before planting but resulted in both retarded root growth and height growth if root plugs were frozen when planted. These results indicate that planting Norway spruce seedlings with frozen root plugs constitutes a considerable risk for successful forest regeneration at soil temperatures normally prevailing in Fennoscandia in spring or early summer especially if the soil is dry at the time of the planting.