Stem Quality and Height Development in a Betula-Dominated Stand Seven Years After Precommercial Thinning at Different Stump Heights

Topping may provide an attractive alternative to traditional precommercial thinning, offering several advantages. The main stem quality of birch (Betula pubescens Ehrh. and Betula pendula Roth, species not separated) was examined seven growing seasons after such topping in a dense, even-aged and naturally regenerated stand in northern Sweden. The height development and survival of main and secondary stems of birch and secondary stems of willow (Salix spp.) were also studied. At a main stem height of 1.8 m, the following treatments, leaving 3100 main stems ha^?1, were applied to secondary stems: traditional precommercial thinning (cutting just above ground), top-cutting at either 40% (71 cm above ground) or 70% (120 cm above ground) of main stem mean height, and no precommercial thinning. For main stems, topping resulted in fewer forks, straighter stems, higher live crown height and smaller diameter of the thickest branch compared with traditional precommercial thinning. In these respects, topping at the higher level above ground gave the best quality. The main stems were no longer at risk of becoming overtopped by the secondary stems following any of these treatments (except for no precommercial thinning).     

The effect of density after precommercial thinning on volume and structure in Pinus Sylvestris and Picea Abies stands

The interaction between stand density and dominant height and the development of volume, mean diameter, mortality and distribution of volume during a period from precommercial thinning to first commercial thinning was studied on permanent plots in Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) stands in Sweden. The reciprocal equation of the yield density effect was used to level the volume yield. Higher density after precommercial thinning resulted in higher yield and smaller mean diameter. The mortality up to first thinning was low, but is also dependent on density after precommercial thinning. The positive skewness of the volume distribution was higher in denser stands.     

Development of Pinus sylvestris Main Stems Following Three Different Precommercial Thinning Methods in a Mixed Stand

Reducing competition by point cleaning may be an attractive alternative to conventional precommercial thinning in forestry. In this study, survival and development of main stems of Scots pine (Pinus sylvestris L.) following point cleaning were examined in a mixed stand of mainly Scots pine and birch (Betula pendula Roth and Betula pubescens Ehrh.) in northern Sweden. Treatments studied were: no precommercial thinning, conventional precommercial thinning, point cleaning of all secondary stems, and point cleaning of only the secondary stems that were higher than the main stem, within a radius of 0.8 m from the main stem, respectively. A randomised complete block design with three replicates was used. Measurements taken 13 growing seasons after these treatments showed that conventional precommercial thinning was the best treatment for retaining Scots pines as main stems. However, conventional precommercial thinning resulted in the poorest timber quality of the remaining Scots pines in terms of stem taper, thickest branch diameter and relative live crown height. In conclusion, point cleaning has to be followed by a complementary cleaning operation if the objective is to retain Scots pines as main stems in such mixed stands.     

Precommercial thinning of beech (Fagus sylvatica L.): Early effects of stump height on growth and natural pruning of potential crop trees

Abstract

This paper reports the early effects of stump height on the growth and natural pruning of potential crop trees after precommercial thinning of a young stand of naturally regenerated beech (Fagus sylvatica L.) in Denmark. The experiment comprises five treatments based on combinations of three grades of precommercial thinning and three stump heights. Treatments include the unthinned control, thinning only of whips and wolf trees (using low stumps), and thinning for potential crop trees using low, medium or high stumps. All treatments were replicated three times. Stump heights averaged 10, 90 or 230 cm, respectively. Pretreatment stem number (live trees) varied from 17,500 to 41,000 ha^?1. In the potential crop tree treatment, post-treatment stem number ranged from 4750 to 9500 ha^?1. Following two growth seasons, the quantity of stump regrowth increased with increasing stump height, the rate of stump regrowth increased with increasing stump height, the diameter growth of potential crop trees increased with decreasing stump height, the increase in stand height did not depend on stump height or post-treatment stem number, and the natural pruning of potential crop trees increased with increasing stump height. It remains to be seen whether these trends hold in the long run, and whether additional economic return from the increase in wood quality with increasing stump height compensates for the reduction in diameter growth.     

桂西南马尾松人工林生长对不同强度采伐的动态响应

[目的]研究不同强度采伐下马尾松的生长动态,筛选适宜的采伐强度,为马尾松人工林近自然经营提供技术支撑。[方法]2007年10月在14年生马尾松人工林(保存密度1 100株·hm~(-2))内进行采伐试验,设置4个采伐强度,即保留密度分别为225、300、375、450株·hm~(-2),以不采伐为对照;其后,自2008年开始连续8 a,每2 a测定1次马尾松的胸径、树高、枝下高和冠面积等生长指标,并计算单株材积和林分蓄积量,应用方差分析和Duncan多重比较分析生长指标对不同采伐强度的动态响应。[结果]表明:采伐强度显著影响林分生长,其中,林分平均胸径、单株材积、冠面积的年均增长量随保留密度增大而减小,但均显著高于对照(P0.05)。采伐后第1 3年,马尾松冠面积增长量显著高于采伐后期,胸径则在采伐后第3 5年最高,而不同采伐强度对林分树高生长影响不明显。保留密度显著影响林分枝下高和蓄积量的动态变化,其年均增长量随密度增大而递增。5个处理间林分蓄积年均增长量的差异随林龄的增大而逐渐缩小。[结论]马尾松人工林生长对不同强度采伐的动态响应以树冠最敏感,冠面积首先陡然增大,进而引起胸径的快速生长。树高和枝下高在采伐后年均增量变化相对平稳。4个采伐强度均显著促进单株材积生长,而仅保留密度为225株·hm~(-2)的采伐对林分蓄积增长量影响显著。综合比较林分的单株材积和林分蓄积连年增长量,建议在桂西南15年生马尾松人工林近自然经营中宜选择300株·hm~(-2)的保留密度进行采伐。     

Stability of height positions in young naturally regenerated stands of Scots pine

The stability of height positions of saplings in young stands of Scots pine (Pinus sylvestris L.) was examined by comparing the height order of trees at successive measurements. The data consisted of six naturally regenerated stands and one planted stand for comparison. The length of the examination period was approximately 20 years, covering the mean height development of stands from 0.5 to 5.5 m. For each stand, a structural equation model was fitted by which the covariance structure occurring in the data could be described. In terms of the stability coefficients between the variables produced by the model, the height position of the saplings was very stable. The height positions had mainly been established during the first 5–10 years of age and at a mean height of less than 0.5–1 m. In the naturally regenerated stands, stability was virtually complete from the stage of 15–20 years and 1.5–2 m onwards. In the planted stand, stability became complete slightly later than in the naturally regenerated stands. According to the results, the height of the sapling can be emphasized as a selection criterion in precommercial thinning.     

Timing and intensity of precommercial thinning in Pinus sylvestris stands

The effects of timing and intensity of precommercial thinning were studied in three Scots pine artificially regenerated stands on Vaccinium forest sites in southern Finland. A two-level factorial design (3×3) was used in each stand: thinning at dominant height of 3, 6 and 9 m to 1000, 1600 and 2200 stems ha^?1. The effects of the treatments were analysed after a period of 23–25 yrs when the dominant height was 14–15 m. Early thinning resulted in the highest standing volume and amount of merchantable wood, and also in slightly accelerated height development. Thinning to 1000 stems ha^?1 caused a considerable production loss, but there were no differences between the densities of 1600 and 2200 stems ha^?1. Branches became thicker after early thinning, but the differences between the treatments were negligible for crop trees. Crown ratio was lowest as the result of early or moderate thinning (2200 stems ha^?1).     

Stand dynamics and tree quality response to precommercial thinning in a northern hardwood forest of the Acadian forest region: 23 years of intermediate results

In the late 1980s, large forest companies began precommercial thinning (PCT) operations in young northern hardwood cutovers in New Brunswick, Canada. To provide supporting growth and yield information, an industrial experiment was established at residual stand densities of 1300, 1600, 1900, and 2200?stems?ha^?1. Stand responses were examined for measurements recorded at 0 (1987), 5 (1992), 10 (1997), 16 (2003), and 23 (2010) years after establishment. Average diameter at breast height, quadratic mean diameter, stand basal area, and stand total volume growth increased as stem density decreased from PCT. There were significant linear differences for many of these variables between treatments and time periods (year). No significant differences were detected in tree height between treatments. In 2010, the four PCT thinning treatments did not exhibit any differences in potential sawlogs at 2.4?m (8?ft) and 3.6?m (12?ft) lengths. Significant differences were observed for 4.9?m (16?ft) sawlogs that were produced at the least dense spacing (1300?stems?ha^?1). Results from this study and recommendations from the European literature suggest that value-added timber products may be produced from more intense PCT treatments than are currently being practiced on sites dominated by yellow birch (Betula alleghaniensis Britt.).     

抚育间伐对杉木人工林生长及出材量的影响

间伐对人工林生长及木材质量具有重要影响。在浙江开化开展了间伐强度（强度、中度和对照）和间伐方式（间伐1次,间伐2次）对杉木人工林生长及出材量等的影响研究,第1试验区大径材培育林分在第7年和第14年进行了2次间伐,第2试验区中径材培育林分仅在第12年时进行1次间伐。结果表明：22年生大径材培育林分和19年生中径材培育林分不同间伐处理之间树高、总断面积的差异均不显著。间伐显著增加了林木胸径的生长,大径材培育林分强度和中度间伐处理的平均胸径分别比对照增加13.78%和9.69%,中径材培育林分强度和中度间伐处理的平均胸径分别比对照增加12.28%和7.02%。间伐显著促进了林木单株材积的增加,2组试验林分活立木材积随着间伐强度的增加而降低,第1试验区22年生林分不同间伐强度之间活立木材积的差异不显著（P>0.05）,第2试验区强度间伐活立木材积显著低于对照（P<0.05）,中度间伐林分活立木材积与对照和强度间伐之间的差异不显著（P>0.05）。2组试验林分总蓄积和出材量也随着间伐强度的增加而降低,二者在3种间伐处理之间均没有显著差异（P>0.05）。间伐强度不能有效增加林分活立木材积和林分出材量,间伐次数对林分出材量及出材规格有重要影响。试验区杉木大径材培育以2次间伐,总间伐强度50%左右较为适宜,而中径材培育则以1次中度间伐（约25%）为宜。     

Simulation Study of a Single-grip Harvester in Thinning from Below and Thinning from Above

Abstract

The time consumption and productivity of a single-grip harvester were studied, using a simulation model, when thinning from below and above in eight randomly selected stands. The model estimated the time required for each work element, given machine and tree positions, and tree size. A 2×5 factorial design was used with factors thinning type [from below (T_b) and above (T_a)] and tree size. Trees were subjectively selected for harvest according to thinning type. Total basal area removal was 30% plot^?1. Approximately 50% more trees were harvested in T_b than in T_a Time consumption tree^?1 was higher for T_a than T_b. Time consumption for machine and boom movements decreased with increasing number of harvested trees, and time for felling and processing of trees increased with harvested mean stem volume. Harvester productivity was 36% higher for T_a, since the increase in harvested mean stem volume was higher than the increase in time consumption tree^?1.     

Effects of thinning and site productivity on culmination of stand growth: results from long-term monitoring experiments in Japanese cedar (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis> D. Don) forests in northeastern Japan

We analyzed data from 28 long-term experimental monitoring plots installed in Japanese cedar (Cryptomeria japonica D. Don) plantations in northeastern Japan to examine how site productivity and thinning practices relate to culmination in stand growth. Site productivity and thinning practices in the plots were evaluated by site index (dominant tree height at 40-years old) and by cumulative thinning rate (cumulative thinning volume divided by cumulative gross production during the entire period of measurement). Culmination of stand growth was evaluated by culmination age of the mean annual increment (MAI) and its maximum value (Max MAI). Max MAI for the mean annual gross increment (MAIgross) and mean annual net increment (MAInet) increased with increasing site index, but did not change with cumulative thinning rate. Culmination age for MAIgross decreased with increasing site index, but did not change with cumulative thinning rate. Culmination age for MAInet decreased with increasing site index. Additionally, culmination age for MAInet increased with increasing cumulative thinning rate in sites with a high site index (>19.3 m) but not in those with a low site index (<19.3 m). These results indicate that thinning extends the culmination age without changing Max MAInet under high site productivity. Therefore, thinning increases total net yield in sites with high productivity based on a long-term perspective.     

Simulation of the long-term effects of different strategies for precommercial thinning in Pinus sylvestris

The influence of the intensity and timing of precommercial thinning (PCT) on stand development and financial return was studied in Scots pine stands. Functions describing the early development of the stand structure after PCT were developed. The functions were based on 195 plots within 41 PCT experiments in Sweden. The dimension distribution of the established stand was estimated and used as input to the decision support system Heureka, to simulate the stand development until final felling. The studied treatments included PCT to 1000, 2000 and 3000?stems?ha^?1 at mean heights of 2, 4 and 6 m. Separate simulations were carried out for different site fertilities. Mean annual volume increment increased with increasing number of stems after PCT whereas the timing of PCT had only a small effect. The land expectation value (LEV) generally decreased with increasing mean height at PCT, primarily because of the increased cost of PCT. LEV decreased with increasing number of stems after PCT at low fertility sites whereas only minor differences were found for PCT to 1000 and 2000?stems?ha^?1 at medium and high fertility sites. The general pattern persisted when different scenarios of future timber quality were simulated.     

Influence of Shelterwood Density on Survival and Height Increment of Picea abies Advance Growth

Abstract

The increases in the arithmetic mean diameter at breast height (dbh) of the 100, 200, 300 and 400 largest stems ha^?1 by dbh associated with six different thinning regimens for periods up to 35 years were compared, by analyses of variance, to the corresponding stem fractions in unthinned stands using permanent sample plot data. In addition, the expected mean dbh of these stand fractions at future points in time was modelled, based on site and stand data obtained at the time of the first thinning. Thirty-five years after the first thinning, the thinning from below regimens resulted in actual increases (a measure affected by both the thinning intensity and the thinning method), compared with the unthinned stands, in the mean dbh for the 100, 200, 300 and 400 largest stems ha^?1 of 2.6–9.0 cm. The corresponding genuine increases (a measure principally affected solely by the thinning intensity) were 4–11 cm. The functions predicting the future dbh of these stand fractions yielded good fits.     

Crown radius of pedunculate oak (Quercus robur L.) depending on stem size,stand density and site productivity

Crown size is a good indicator of the growth potential of trees and is often used in forest management for outlining thinning guidelines or constructing forest growth models. The aim of this study was to analyse mean crown radius as a function of stem size, stand density and site productivity in even-aged stands of pedunculate oak (Quercus robur L.). Data included measurements of 620 trees from 53 plots in nine thinning experiments and one operational stand in Sweden, Denmark and Great Britain, representing a wide spectrum of thinning practices ranging from the strictly unthinned control to extremely heavy thinning with essentially solitary trees. Three sets of models were constructed based on different predictor variables, including indicators of individual stem size (diameter at breast height, DBH), stand density/thinning grade (quadratic mean diameter and stand basal area) and site productivity (stand top height). Preliminary results indicated a significant effect of DBH and (nominal) thinning grade on crown radius. The response pattern of the final models indicated an increasing crown radius with increasing DBH, with increasing thinning grade (decreasing stand density) and with decreasing site productivity. The models are valid for predicting the crown radius of pedunculate oak in even-aged forest stands.     

Incidence of Heterobasidion annosum in precommercial thinning stumps in coastal British Columbia

Coniferous stumps in 83 stands in coastal British Columbia were sampled 3-5 years after precommercial thinning. The percentage of stumps and surface area colonized by Heterobasidion annosum were determined for 25 stumps of each species in each 5-cm diameter class present in each stand. There were significant differences among species in the percentages of stumps and surface area colonized, with Douglas-fir (Pseudotsuga menziesii) having the lowest values, amabilis fir (Abies amabilis) and Sitka spruce (Picea sitchensis) the highest and western hemlock (Tsuga heterophylla) being intermediate. For stumps of each species 5–20 cm in diameter, both the percentage of stumps and surface area colonized increased with increasing diameter. In stumps that were grafted to an adjacent tree, there was decreased incidence of H. annosum for Douglas-fir and Sitka spruce and increased incidence for western hemlock and amabilis fir. There were trends in the percentage of stumps and area colonized for season of thinning and biogeoclimatic subzones with the values for most species decreasing as the amount of precipitation increased. Colonization of precommercial thinning stumps by H. annosum occurs throughout the coastal region of British Columbia, and this will increase the amount of inoculum and will likely increase the incidence of butt rot. The results of this study suggest that the increase in inoculum can be minimized by thinning before age 15, by cutting only trees less than 10 cm in diameter and by thinning during low risk seasons.     

Impacts of different forest management scenarios on forestry and reindeer husbandry

In northern Sweden, the forests are used simultaneously for both timber production and reindeer husbandry. During the winter months, lichen is the most important fodder for reindeer. Forest management operations are generally considered having a negative impact on reindeer husbandry as harvesting and dense stands remove or obscure the ground lichen cover. In this study, we simulate three different scenarios for forest management, differing in the intensity and types of harvest operations. The resulting 100-year scenarios are analyzed with respect to their estimated suitability for providing reindeer pasture areas. Suitability is determined by vegetation type, stand density and stand height. The results indicate that the current trend of a decrease in lichen area will continue if existing forestry practice prevails. Implementing continuous cover forestry as a management alternative and carrying out precommercial thinning could halt the decrease in reindeer pasture area and even lead to a future increase in pasture area, with losses of approximately 5% in the net present value of forestry.     

Production of hybrid aspen on agricultural land during one rotation in southern Sweden

High potential productivity together with short rotation periods have made hybrid aspen an interesting option for wood production on former arable land in Nordic countries.In this study,some of the oldest active experimental plots with hybrid aspen in Sweden were remeasured at 23-30 years of age.A main aim was to assess age and productivity at the time of maximum mean annual volume increment.In addition,the influence of commercial thinning on stand development and differences in genetic gain among clones were investigated.Data from five experiments in southern Sweden were used,including three genetic trials,one demonstration stand with a clone mixture and one stand regenerated from root suckers.The three genetic trials were treated as single plot experiments,subject to a standard thinning program.In the remaining experiments,different thinning strategies were tested in a balanced block design.Volume growth had culminated or was close to maximum at age25-30 years.Mean annual stem volume increment at culmination was 20-22 m~3 ha~(-1) a~(-1).Dominant height reached30-35 m at 28-30 years of age.Mean diameter at breast height was 27-29 cm after 29-30 years in the genetic trials.Clonal ranking based on diameter at age 7-9 years was positively correlated with the ranking at the final measurement in the genetic trials,20 years later.This indicates that clones can be selected for superior growth based on results from young trials.More intense thinning programs increased the mean diameter compared to light thinning.The study indicates that one or two early and relatively heavy thinnings can promote the development of crop trees,without jeopardizing total volume production during a rotation of 25-30 years.     

广西凭祥西南桦中幼林林木生长过程与造林密度的关系

造林密度决定着林分后期密度大小,是影响人工林生长的重要因素之一,与林木生长过程密切相关,决定着林分的健康状况及生产力,是林分合理结构的数量基础[1].造林密度过高将过早加剧林分内部竞争,增加林木死亡率,减少生长量[2-5],因此,确定合理的造林密度是人工林营造的关键技术环节,揭示造林密度与林木生长过程的关系,将有助于制定合理的人工林经营制度.     

造林密度对米老排人工林初期生长的影响

[目的]探讨不同造林密度对米老排人工林生长的影响规律,为米老排人工林定向培育过程中的密度控制提供参考。[方法]以广东省云浮市造林后6年生米老排人工林为研究对象,对不同造林密度(625、833、1 111、1 667、2 500株·hm~(-2))林分平均树高、优势木高、胸径、保留率和枝下高等生长指标进行连续4年调查。[结果]表明:随着造林密度的增大,米老排林分平均胸径、胸径连年生长量、保留率、单株材积和材积连年生长量均显著减小,而枝下高、林分蓄积量和蓄积连年生长量显著增加。在一定密度范围内,造林密度对林分高生长的影响比较小。造林后第6年,密度1 667株·hm~(-2)林分的平均树高最大(11.4 m),优势木高以密度1 111株·hm~(-2)林分的最大(13.3m),树高连年生长量以密度625株·hm~(-2)林分的最大(1.5 m·a~(-1));密度625株·hm~(-2)林分的平均胸径、胸径连年生长量、单株材积和材积连年生长量均最大,分别为14.3 cm、2.5 cm·a~(-1)、0.097 3 m~3和0.038 2 m~3·a~(-1),比密度2 500株·hm~(-2)林分的分别增加27.7%、81.0%、49.0%和82.4%;密度2 500株·hm~(-2)林分的枝下高、蓄积量和蓄积连年生长量均最大,分别为6.0 m、149.4 m~3·hm~(-2)和44.8 m~3·hm~(-2)·a~(-1),分别是密度625株·hm~(-2)林分的2.61、2.52、1.95倍。[结论]分析了造林密度对米老排初期生长的影响,对米老排人工林的培育具有理论指导意义。     

Effects of wide spacing and thinning strategies on wood quality in Norway spruce (Picea abies) stands in southern Sweden

Abstract

The initial density of a stand influences both the prethinning growth and the quality of the harvested trees. This study investigated the effects of different square spacings (2.0, 2.5 and 3.0 m) with thinning from above and thinning from below on stand development and tree characteristics in a 33-year-old Norway spruce [Picea abies (L.) Karst.] plantation in southern Sweden. Before thinning the total standing volume was not significantly different between treatments. Diameter at breast height (dbh) and diameter of the thickest branch were positively correlated. Before thinning, dbh of the trees and their thickest branches were significantly higher in the stands with 3.0 m spacing. After thinning, the dbh and the diameter of the thickest branch did not significantly differ between the 3.0 m spacing with thinning from above and 2.0 and 2.5 m spacing with thinning from below. Spacing did not significantly influence the presence or size of spike knots. The results suggest that a combination of wide spacing with thinning from above may yield timber of similar quality to denser spacing with thinning from below.