Evaluation of rolling shear strength of plywood by flexural vibration method

The rolling shear strength of plywood was evaluated using a flexural vibration test. Test specimens were lauan and Douglas fir three-ply plywoods made from thick veneers. The dynamic shear and Young's moduli were determined using the flexural vibration method, which involved in-plane and out-of-plane flexural vibration. The rolling shear strength was determined using the static destructive method, which is dependent on the direction of the lathe check in the core veneer. Before and after accelerated aging treatments were conducted, there were relations between out-of-plane dynamic properties (out-of-plane shear and Young's moduli) and its rolling shear strength. It was concluded that the rolling shear strength is related not only to the shear property of the core but the flexural stiffness of two faces when the deformation of out-of-plane plywood was not restrained.Part of this work was presented at the 47th Annual Meeting of The Japan Wood Research Society, Kochi, April 1997     

Young’s modulus obtained by flexural vibration test of a wooden beam with inhomogeneity of density

The object of this study was to investigate the inhomogeneity of density within a beam from a relationship between the dynamic Young’s moduli from the Euler-Bernoulli elementary theory of bending (E _n) and resonance mode numbers (n), which is plotted as the “E-n” diagram in this article. Rectangular beams with dimensions of 300 (L) × 25 (R) × 5mm (T) of Sakhalin spruce (Picea glehnii Mast.), Sitka spruce (Picea sitchensis Carr.), Japanese red pine (Pinus densiflora Zieb. et Zucc.) and white oak (Cyclobalanopsis myrsinaefolia Oerst.) were used for specimens. Small parts of beams were replaced with a small portion of another species to examine the influence of the inhomogeneity of density on E _n. A free-free flexural vibration test was undertaken and E _n was calculated by the Euler-Bernoulli theory. The resonance frequency of a specimen with inhomogeneity of density was simulated by modal analysis. The density distribution in the longitudinal direction of the specimen for which E _n did not decrease monotonically with n was obtained. From the modal analysis, the inhomogeneity of density was equivalent to a concentrated mass attached to a uniform beam. The pattern of the E-n diagram was changed by replacing a part of the specimen with another species. Specimens for which E _n did not decrease monotonically with n had a high density part because of indented rings, knots, or resin.     

林业常用16种杀虫剂对赤眼蜂的急性毒性和安全性评价

采用管测药膜法测定了16种杀虫剂对松毛虫赤眼蜂的急性毒性,并进行安全性评价。急性毒性测定的结果表明:苏云金杆菌、球孢白僵菌、灭幼脲、杀铃脲、甲氧虫酰肼、苦皮藤素对松毛虫赤眼蜂毒性较低,其LR50均高于9.16×10-3mg·cm-2,为低风险性药剂。甲氨基阿维菌素苯甲酸盐、啶虫脒、噻虫啉、辛硫磷、高效氯氟氰菊酯、吡虫啉、氟虫腈和阿维菌素对松毛虫赤眼蜂毒性较高,其LR50分别是2.28×10-4、9.81×10-5、5.23×10-5、2.43×10-5、1.39×10-5、4.33×10-6、2.10×10-6和1.92×10-6mg·cm-2,安全性评价均为高风险性和极高风险性。敌敌畏对松毛虫赤眼蜂的毒性最高,其LR50是1.11×10-6mg·cm-2;其次为虫螨腈,LR50是1.31×10-6mg·cm-2,对松毛虫赤眼蜂伤害均较严重。     

带锯机板式弹簧张紧系统锯条扭转振动频率的研究

根据以前对带锯机杠杆压砣式张紧系统振动的分析,设计了一新型装置,并用实验结果对其功率谱进行了分析,找出了影响振动的主频率。     

林草结合的国土生态安全体系建设

本文在分析吉林西部的生态特点、植物地域分布规律和林少草稀的主要矛盾之后,论述了乔灌草结构是最佳生态结构,最后介绍了生态草建设工程是按照生态适应性和植物地域分布规律建设林草结合的国土生态安全体系的最佳模式。     

Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

Aerodynamic sound and self-excited vibration of circular saw with step thickness I: Comparison of dynamic characteristics between the common circular saw and the circular saw with step thickness

The natural frequencies, aerodynamic noise, whistling noise, and self-excited vibration between the common circular saw with uniform thickness and the circular saw with step thickness (thin on its outer part and thick on its inner part) were researched during idling. The natural frequencies of the circular saw with step thickness increased with an increase in the thickness and in the radius of the thick part. The frequencies of the circular saws with step thickness (thick at the inner part) were higher than that of the thin circular saw with a uniform thickness of 0.5mm. The aerodynamic sound pressure level induced from circular saw teeth increased with an increase in the tooth thickness. The whistling noise and self-excited vibration easily occurred in the thick circular saws (1.5, 2.0, and 2.5mm). The whistling sound pressure level and the vibration amplitude increased with an increase in the thickness of the saw. None of the designed circular saws with step thickness generated whistling noises or self-excited vibration during idling.Part of this report was presented at the 45th annual meeting of the Japan Wood Research Society at Tokyo, April 1995 and the 12th International Wood Machining Seminar at Kyoto, October 1995     

Application of modal analysis by transfer function to nondestructive testing of wood I: determination of localized defects in wood by the shape of the flexural vibration wave

This study was intended to detect nondestructively some defects such as knots and grain deviations in wood using modal analysis. The shapes of flexural vibration waves at the first mode generated by the tapping of wooden beams were determined using the transfer function. The wave shapes obtained were compared with the theoretical wave shape for a uniform material; and the possibility of detecting defects in wood was examined. The results are summarized as follows: (1) The shapes of flexural vibration waves at the first mode of wooden beams free of defects coincided almost completely with the theoretical wave shape. (2) The shapes of flexural vibration waves of wooden beams containing defects such as knots clearly differed from the theoretical wave shape, especially near the defect. (3) Based on these results, it should be possible to detect the presence of defects and to determine their location in wood.Part of this report was presented at the 49th Annual Meeting of the Japan Wood Research Society, Tokyo, April 1999. This article is translated from the Japanese edition published inMokuzai Gakkaishi Vol. 47, No. 4, 1988     

Piezoelectric behavior of wood under combined compression and vibration stresses I: Relation between piezoelectric voltage and microscopic deformation of a Sitka spruce (Picea sitchensis Carr.)

This study investigated the relation between piezoelectric behavior and the deformation of trachieds in real time under combined compression and vibration stresses. Scanning electron microscope images were recorded directly into a video recorder. Two types of microscopic destruction were observed in the specimens. With the first type, although a small uprush around the boundary of the annual ring was observed, the specimens were broken only by shearing fracture in the 45° direction. With the second type, the specimens were finally broken by shearing fracture after repeated buckling. In these cases the piezoelectric voltage increased almost linearly in the elastic region, proceeded to the maximal point, and then decreased gradually. Finally a clear peak appeared in the buckling and shearing fracture. There is a curved relation between the specific gravity and the piezoelectric parameter when the influence of voids is considered, and there is a linear relation between the dynamic Young's modulus and the piezoelectric parameter when the stress is considered.Part of this paper was presented at the 46th annual meeting of the Japan Wood Research Society in Kumamoto, April 1996     

Application of modal analysis by transfer function to nondestructive testing of wood II: modulus of elasticity evaluation of sections of differing quality in a wooden beam by the curvature of the flexural vibration wave

 The shape of the flexural vibration wave of wooden beams at the first mode was detected using the transfer function. The dynamic modulus of elasticity (MOE) of beam sections of differing quality was estimated from the ratio of the curvature of the wave shape in this section to that of a clear beam. The results were as follows: (1) If a section with a lower dynamic MOE was introduced into a clear wooden beam, the curvature of the wave shape in that section became higher. (2) The ratio of the MOE and the reciprocal of the curvature ratio were highly correlated. (3) The MOE of a defect could be estimated, and the position of the defect could be determined accurately by examining the curvature of the flexural vibration wave shapes. Received: March 22, 2002 / Accepted: May 15, 2002 Part of this report was presented at the 50th Annual Meeting of the Japan Wood Research Society, Kyoto, April 2000. This article is translated from the Japanese version, which was published in Mokuzai Gakkaishi 47(5), 2001 Correspondence to:Y. Ishimaru     

三达生态型现代农业园农业环境现状调查与评价

以标准NY/T1054-2006为依据,确定了对三达生态型现代农业园的环境调查内容,建立了园区环境监测方案,通过对园区农业环境要素:土壤、种植业灌溉水、畜禽饮用水、农产品加工用水和环境空气的监测评价,结合环境调查结果得出结论:三达生态型现代农业园农业生产环境达到了生产绿色食品的环境要求。     

提高杨木线性振动摩擦焊接胶合性能的研究

研究了杨木线性振动摩擦焊接的干剪切强度、湿剪切强度和木破率。为提高杨木摩擦焊接的湿剪切强度与木破率,采用表面氧化、表面磺化以及表面涂覆的方式处理杨木板材,再经线性振动摩擦焊接进行黏合,使用万能力学试验机测得其剪切强度,对比表面处理前后剪切强度的变化,并利用傅里叶红外光谱分析了其表面处理前后基材和摩擦焊接层的化学基团变化情况,对胶合性能的变化做出解释。研究结果表明:杨木经过表面氧化磺化涂覆醋酸锌处理后,摩擦焊接层的干剪切强度为5.41 MPa,木破率为63%,与未处理的杨木相比,分别提高了48.22%和96.88%;湿剪切强度从0提高到1.34 MPa;摩擦焊接时厚度损失减少了46.4%。杨木分别经过表面氧化和表面磺化处理后,摩擦焊接层的干剪切强度仅为3.45和4.10 MPa,木破率为28%和42%,湿剪切强度为0.76和0.96 MPa。摩擦焊接层的红外光谱分析表明,经表面氧化磺化涂覆醋酸锌处理后,杨木中的纤维素和半纤维素分解,使木质素的相对含量有所增加,且活化了杨木中的—OH,与醋酸锌生成多醚,消耗了亲水性的—OH。     

基于POE的青岛城阳新天地公园使用状况评价研究

基于POE(Post Occupancy Evaluation)研究方法对青岛城阳新天地公园进行调查研究,从新天地公园设计使用者的角度出发,通过实地考察、对园内使用者的问卷调查、随机访谈等方式了解该公园使用状况,尝试指出新天地设计的主要特色和不足,希望为以后城市公园的设计、管理服务和改建等方面提供一定的借鉴。     

油茶无性系的生长适应性和稳定性分析及综合评价方法

油茶的选择育种是一种行之有效的方法，对油菜无性系的鉴定则是选择育种的重要内容，油茶伏树无性系的遗传效应与环境效应之间总是存在着互作关系，为了测定油茶无性系的生长适应性和稳定性，本文引进性状回归参数ｂｉ及Ｓｉ，结构模型参数ａｉ及λｉ并对其内容，方法和特点作了系统阐述。     

正确使用安全标志 提高木工机械安全性能

介绍了木工机械安全标志的分类与形式,安全标志的尺寸及设置与安装;分析了安全标志在使用过程中存在的主要问题,并对正确使用安全标志提出了建议。     

某碟形弹簧疲劳失效分析

以某振动机构中碟形弹簧为研究对象,对其进行了瞬态分析。分析结果表明,该碟形弹簧在结构设计上存在缺陷,无法满足其使用寿命,通过理论分析为后续结构改进提供相关依据。     

木质材料舒适性属性的粗糙集约简与模糊评价

应用粗糙集模糊评价法对10种常见木质建材的舒适性属性进行指标约简和评价。首先初选出影响木质材料舒适性的14个因素指标;其次针对所选因素构建粗糙集模型,将因素集约简至5个指标;然后确定各种材料在各因素的隶属函数及隶属度,进行模糊综合评价,得出各材料的舒适性排序;最后对评价结果进行雷达图分析和分组比较。结果表明:这种方法能够为人们合理选择和利用木质材料提供科学依据。     

Thermal degradation modeling of flexural strength of wood after exposure to elevated temperatures

Abstract

Wood is being used heavily in single-family residential dwellings. Therefore, it is important to categorize their response when exposed to elevated temperatures for a sustained period of time. An important aspect of structural fire design is to assess postfire residual strength of existing structures. This study addresses this issue by developing models to predict strength degradation of wood after exposure to elevated temperature. The objectives were to (a) study the effect of exposure time on bending strength [Modulus of Rupture (MOR)] of wood at elevated temperatures, (b) interpret any relationships between different temperature and time of exposure using kinetics and a statistical approach, and (c) compare the two approaches. Two hundred thirty-two samples in total were tested in flexure as a function of exposure time and several temperatures. MOR of wood decreased as a function of temperature and exposure time. Rate of degradation was higher at higher temperatures. These results were fit to a simple kinetics model, based on the assumption of degradation kinetics following an Arrhenius activation energy model with apparent activation energy of 37.4 kJ/mol. A regression-based statistical model was also developed. The kinetics-based model fit the data better with one less parameter and predictions consistently matched the observed values, making the model preferred over the regression approach.     

浅议工程量清单计价模式

本文论述了实行工程量清单计价模式的重要性及其优越性;探讨了它与传统的定额计价模式的区别与联系。工程量清单计价模式是建筑市场发展的必然趋势,它对招投标机制的完善和发展及建立有序的建设市场公平竞争秩序起到积极的推动作用。