Should unthinned oak stands of advanced age (≥ 60 yr) be thinned?

ABSTRACT

Oaks (Quercus sp.) account for nearly one-third of the sawtimber harvest in Wisconsin. As trees age, their ability to respond to thinning is reduced; therefore, the objective of this study was to determine whether thinning previously unthinned oak stands of advanced age (≥ 60 yr) would achieve biological, financial, and operational objectives. During 2014, we conducted an inventory of 25 oak stands in northern Wisconsin. Fifteen received their first thinning 8–14 yr ago at ages 60–78 yr and 10 had never been thinned. Stand-level volume growth, logging costs, and net present values were estimated for each site. The age and site index of the thinned and unthinned sites were not significantly different (p > .10). Thinned and unthinned sites grew comparable net volumes per ha (5.09 and 5.90 m³, respectively); however, because this growth was concentrated on fewer trees, the trees on the thinned sites responded vigorously to thinning. As age at first thinning increased, growth response was reduced (p = .067); however, thinning still increased the growth of residual trees. Thinned sites had higher net present values compared to unthinned sites (p < .01) and logging costs were 10.6% lower (p = 0.06). Overall, for stands between 60 and 78 years old, thinning was beneficial financially, operationally, and biologically.     

Effect of natural root grafting on growth response of jack pine (Pinus banksiana) after commercial thinning

Commercial thinning is a silvicultural treatment used to increase the merchantable yield of residual trees. Growth response to thinning, however, is highly variable and discrepancies between studies remain largely unexplained. The objective of this study was to demonstrate the effect of natural root grafting on growth response after thinning. We excavated root systems of jack pine (Pinus banksiana) in five naturally regenerated stands, in which three had been commercially thinned 6 and 9 years earlier. Radial growth before and after thinning was examined using dendrochronological techniques. Thinning increased radial growth of trees, however growth increments were significantly less for trees that had root grafts with removed trees, while growth of grafted trees was better in unthinned stands. Furthermore, radial growth response of trees grafted to removed trees was smaller than that of non-grafted trees 4 years and more post-thinning. On average, non-grafted stumps survived less than 1 year (0.4 year), while grafted stumps lived 2.0 years after the stem was removed. Differences in growth response to thinning between grafted and non-grafted trees thus appear to be linked to the support of roots and stumps of removed trees by live residual trees.     

Stem Form and Taper Changes After Thinning and Nitrogen Fertilization in Picea abies and Pinus sylvestris Stands

Stem form and taper changes after thinning and thinning combined with N fertilization were studied in 23 Norway spruce [Picea abies (L.) Karst.] and 46 Scots pine (Pinus sylvestris L.) stands in Sweden observed for 5-28 yrs. Average taper was calculated for the stem section 1.3-6.0 m above ground level and as the ratio between the diameter at breast height and total tree height for periods of 5-10 yrs. At the start of the experiment, before the first thinning, the dominant height was 12-15 m. Once 65% of the basal area had been removed in a single thinning from below, the remaining trees showed a strong increase in taper compared with trees in unthinned stands. Stems in stands treated with heavily recurrent thinnings from below also increased in taper, although the increases were not always statistically significant. Trees in thinned, N-fertilized Scots pine stands in middle and northern Sweden developed a more pronounced taper compared with stems in equally thinned, unfertilized stands.     

Influence of early thinning in broadleaved stands on development of remaining stems

Abstract

Precommercial thinning studies were performed in eight hardwood stands in southern Sweden. Birch (Betula pendula Roth and B. pubescens Ehrh.) was the dominating tree species, but aspen (Populus tremula L.), black alder [Alnus glutinosa (L.) Gaertn.] and lime (Tilia cordata Mill.) were also present. Main stems were selected before thinning. Three treatments were applied in each stand: (1) no thinning (control), (2) standard thinning, and (3) strong thinning, i.e. leaving about two-thirds of the stem number of treatment 2. Each treatment was replicated three times on all sites. The development of the main stems were recorded during the five consecutive years. Breast height diameter and green crown size (length and width) developed significantly more slowly in the control treatment than in the thinned ones, whereas tree height development was little affected by treatment. Simulation of 10 years’ future growth from the time of the end of the study indicated that future diameter growth will be lower in initially non-thinned stands than in immediately thinned ones. The study results stress the importance for future growth of proper early silviculture in young broadleaved stands (i.e. early and high intensity thinning), a topic that has not been fully evaluated before.     

Mortality and growth of dwarf mistletoe‐infected red and white fir and the efficacy of thinning for reducing associated losses

In managed forests dominated by true fir (Abies) species, stands are often restocked using understory trees retained during timber harvest, making the effects of dwarf mistletoe (Arceuthobium spp.) infestation on small true fir a concern. This study examined the response of small red (A. magnifica) and white (A. concolor) fir and their dwarf mistletoes (A. abietinum f.sp. magnificae and A. abietinum f.sp. concoloris, respectively) to precommercial thinning treatments in fir‐dominated stands in the Sierra Nevada Mountains of California. Tree diameters and dwarf mistletoe ratings were monitored from 1981 to 2001, and mortality was observed from 1981 to 2006. Red and white fir survival and radial growth decreased significantly with greater mistletoe ratings and increased with larger diameters and live crown ratios. Thinning significantly increased survival and growth of white, but not red fir. Over the course of the study, mistletoe ratings for both fir species did not change significantly in unthinned stands, but increased in thinned stands. However, while statistically significant, increases in mistletoe ratings in thinned stands were gradual and mistletoe ratings did not statistically differ between treatments 20 years post‐thinning. Additionally, thinning did not significantly influence mistletoe spread to uninfected trees, indicating that precommercial thinning in lightly infested red and white fir stands will not likely result in substantial increases in dwarf mistletoe abundance over typical harvesting intervals. Overall, while severe dwarf mistletoe infection ratings reduced tree survival and growth, because ratings remained low, actual losses resulting from mistletoes during this study were minor and will not likely result in substantial economic losses over normal harvesting intervals. This finding indicates that precommercial thinning treatments designed specifically to compensate for mistletoe‐associated losses may not be necessary when managing red and white fir for timber production.     

Models for Assessing Timber Grade Distribution and Economic Value of Standing Birch Trees

In order to obtain a more precise prediction of the distribution of each timber grade or log grade with regard to the volume of birch (Betula pendula Roth., B. pubescens Ehrh.) in models for long-term planning, ordered probit models were developed. These models were developed by using data from three mixed birch and Norway spruce stands in Norway. The data consisted of 168 stems. In Norway, three ordinary birch saw log grades are commonly used, with pulpwood as a fourth grade. In this study, these four grades were applied in addition to waste timber, which was treated as a fifth grade. The developed models showed that the grade distribution of birch trees of mixed birch and spruce stands was highly correlated with tree height (p<0.01) and height to first visible dry branch (p=0.081). The statistical significance of both models was good (p<0.0001), as measured by log likelihood test statistics. Classifying the 168 stems by saw timber or pulpwood in butt log led to greatly improved estimates (p<0.01). The developed models would allow the incorporation of timber grade in stand simulators, enabling more precise predictions regarding the economic implications of alternative management strategies for birch trees.     

Control of tracheid cross-sectional dimensions in Norway spruce and Scots pine wood raw material

Abstract

Wood properties, including tracheid cross-sectional dimensions, show a large degree of variation. To improve the properties of products made from wood, different methods to control variation have been developed. This study aims to determine the theoretical efficiency of three control strategies: the fractionation of pulped tracheids into earlywood and latewood, the separation of juvenile and mature wood, and sorting of logs according to tree size. The efficiency of each method was studied by first constructing virtual trees from measured tracheid cross-sectional dimensions, then simulating the efficiency of above-mentioned methods. The tracheid dimension data include Norway spruce (Picea abies (L.) Karst.) and Scots pine (Pinus sylvestris L.). The simulations show that separation into earlywood and latewood classes has the highest theoretical efficiency and yields the lowest variances in raw material. Classification into juvenile and mature wood groups is the second most efficient method, and the sorting of logs according to the size class of the tree is the least efficient method. It was also concluded that the variation in cell-wall thickness and radial diameter mainly originates from differences between earlywood and latewood, whereas the variation in tangential diameter mainly originates from differences between mature and juvenile wood.     

Effects of wide spacing and thinning strategies on wood quality in Norway spruce (Picea abies) stands in southern Sweden

Abstract

The initial density of a stand influences both the prethinning growth and the quality of the harvested trees. This study investigated the effects of different square spacings (2.0, 2.5 and 3.0 m) with thinning from above and thinning from below on stand development and tree characteristics in a 33-year-old Norway spruce [Picea abies (L.) Karst.] plantation in southern Sweden. Before thinning the total standing volume was not significantly different between treatments. Diameter at breast height (dbh) and diameter of the thickest branch were positively correlated. Before thinning, dbh of the trees and their thickest branches were significantly higher in the stands with 3.0 m spacing. After thinning, the dbh and the diameter of the thickest branch did not significantly differ between the 3.0 m spacing with thinning from above and 2.0 and 2.5 m spacing with thinning from below. Spacing did not significantly influence the presence or size of spike knots. The results suggest that a combination of wide spacing with thinning from above may yield timber of similar quality to denser spacing with thinning from below.     

Response of old-growth conifers to reduction in stand density in western Oregon forests

The positive growth response of healthy young trees to density reduction is well known. In contrast, large old trees are usually thought to be intrinsically limited in their ability to respond to increased growing space; therefore, density reduction is seldom used in stands of old-growth trees. We tested the null hypothesis that old-growth trees are incapable of responding with increased growth following density reduction. The diameter growth response of 271 Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco), ponderosa pine (Pinus ponderosa Dougl. ex Laws) and sugar pine (Pinus lambertiana Dougl.) trees ranging in age from 158 to 650 years was examined 20 to 50 years after density reduction. Density reduction involved either light thinning with removal of less vigorous trees, or shelterwood treatments in which overstory trees were not removed. Ratios of basal area growth after treatment to basal area growth before treatment, and several other measures of growth, all indicated that the old trees sometimes benefited and were not harmed by density reduction. Growth increased by 10% or more for 68% of the trees in treated stands, and nearly 30% of trees increased growth by over 50%. This growth response persisted for at least 20 years. During this 20-year period, only three trees in treated stands (1.5%) exhibited a rapid decrease in growth, whereas growth decreased in 64% of trees in untreated stands. The length of time before a growth response to density reduction occurred varied from 5 to 25 years, with the greatest growth response often occurring 20 to 25 years after treatment. These results have important implications both for the basic biology of aging in woody plants as well as for silvicultural practices in forests with old-growth trees.     

Intra-increment circumferential variation in tracheid length as a basis for sampling genetically superior trees of deodar (Cedrus deodara (Roxb.) Loud.)

Summary Intra-increment circumferential variation in tracheid length at breast-height in deodar (Cedrus deodara (Roxb.) Loud. vern. diar) has been studied with the main objective of evolving an efficient sampling procedure for the purpose of comparing tracheid length amongst individual trees of forest stands. It has been studied in five sampling strata namely: whole-annual ring, whole-earlywood, whole-latewood, first-firmed earlywood and last-formed latewood. Tracheid length shows significant circumferential variation in whole-annual ring, whole-earlywood, whole-latewood and last-formed latewood. However, when the mean tracheid length of two opposite directions is compared with the mean tracheid length of eight cardinal directions in these sampling strata, then no significant difference is observed. First-formed stratum of an annual ring exhibits statistically consistent values around the circumference and thus sampling from any random radial direction can serve the purpose for the comparison of inherent values of tracheid length amongst the deodar trees.The financial assistance given by Himachal Pradesh University as H.P.U. Junior Research Fellowship to second author is highly acknowledged     

Altered light conditions following thinning affect xylem structure and potential hydraulic conductivity of Norway spruce shoots

Trees must respond to many environmental factors during their development, and light is one of the main stimuli regulating tree growth. Thinning of forest stands by selective tree removal is a common tool in forest management that increases light intensity. However, morphological and anatomical adaptations of individual shoots to the new environmental conditions created by thinning are still poorly understood. In this study, we evaluated shoot morphology (shoot length, needle number, projected leaf area) and anatomy (tracheid lumen area, tracheid number, tracheid dimensions, xylem area, potential hydraulic conductivity) in three Norway spruce (Picea abies/L./Karst.) families exposed to different thinning regimes. We compared shoot characteristics of upper-canopy (i.e. sun-exposed) and lower-canopy (i.e. shaded) current-year shoots in a control plot and a plot thinned to 50 % stand density the previous year. One tree per family was chosen in each treatment, and five shoots were taken per canopy position. We found that upper-canopy shoots in both plots had higher values than lower-canopy shoots for all studied parameters, except lumen roundness and tracheid frequency (i.e. tracheid number per xylem area). Thinning had little effect on shoot morphology and anatomy 1 year after thinning, except for small but significant changes in tracheid dimensions. Needles were more sensitive to altered light conditions, as projected leaf area of shoot, needle number and leaf hydraulic conductivity changed after thinning. Differences between upper- and lower-canopy shoots did not seem to be influenced by thinning and were almost the same in both plots. Our results suggest that lower-canopy shoots require several years to modify their morphology and anatomy to new light conditions following thinning. The slow light adaptation of the lower canopy may be of practical importance in forest management: thinned stands may be predisposed to drought stress because newly exposed shoots experience increased illumination and transpiration after thinning.     

Tree Mortality,Needle Biomass Recovery and Growth Losses in Scots Pine Following Defoliation by Diprion pini (L.) and Subsequent Attack by Tomicus piniperda (L.)

Tree mortality and growth losses following insect defoliation are poorly documented in Scandinavia. In 1990-1991, Diprion pini (L.) caused extensive defoliation to Scots pine in Lauhanvuori national park and surrounding areas in south-western Finland. Most trees lost all their foliage in 1990. In 1991, the outbreak area was sprayed with diflubenzuron (Dimilin®), except in the national park, where trees were severely defoliated again. No further defoliation occurred in 1992. In spring 1993, sprayed trees had ca 30% foliage, whereas unsprayed trees on average carried less than 10% of full foliage. The latter trees were susceptible to attack by Tomicus piniperda (L.), whereas the former largely escaped beetle attack. Beetle attacks peaked in 1993, and depletion of suitable host trees probably terminated the beetle outbreak in the area. Two years of severe defoliation resulted in substantial tree mortality and growth losses. In spring 1997, these unsprayed stands had suffered a ca. 50% loss in basal area which was mainly because of mortality, and about half of the dead trees had been attacked by T. piniperda. Surviving trees had ca 50% of full foliage, and radial growth had still not recovered. Basal area growth was reduced by 40-70%, depending on the amount of foliage left after the second year of defoliation. In contrast, tree mortality and beetle attack in the sprayed stands were negligible, and these trees had recovered full foliage and radial growth by spring 1997. Thus, one year of total defoliation resulted in an estimated loss in basal area growth of approximately 30% during ca. 5 yrs. In conclusion, the spraying operation was economically justified, as it prevented substantial tree mortality and reduced growth losses.     

Variation in density of Picea sitchensis in relation to within-tree trends in tracheid diameter and wall thickness

The influences of cambial age and ring width on density of Sitkaspruce (Picea sitchensis (Bong.) Carr) were analysed in relationto within-tree trends in tracheid diameter and cell wall thickness.Discs were sampled at breast height from a total of 24 trees,from seven stands at three contrasting sites in Wales, and atbreast height, 30 per cent and 60 per cent total tree heightfrom one of the stands. Across the juvenile wood, ring density decreased with ring numberfrom the pith while radial tracheid diameter increased. Theseoverall trends were considered to be inherent to tree growth,presumably associated with cambial ageing, since they occurredin all trees on all sites. In juvenile wood, density also variedwith site growth rate (as indicated by ring width) at similarcambial age, wider rings being associated with more rapidrateof change in tracheid diameter with ring number and with decreasein tracheid wall thickness. Consequently, on a site having treeswith high growth rate density decreased more rapidly acrossthe juvenile wood, down to a lower minimum value, than on siteswith a slower growth rate. In mature wood, the decrease in densitywith increase in ring width was associated with differencesin both tracheid diameter and wall thickness. Density was slightly(though not significantly) higher at breast height than in comparablerings at 30 per cent total height, associated with significantlythicker tracheid walls at breast height. Changes in radial tracheid diameter (with ring number, or withring width) were associated with greater differences in theearlywood than towards the latewood end of each growth ring,while variations in wall thickness with ring width were associatedwith rate of increase in wall thickness towards the latewoodend. This may account for some previously conflicting reportson influence of silvicultural management on density, for densityis likely to vary with influence of environment on the seasonalcycle of cambial activity. The extent of the juvenile wood as delimited by the inner coreof wide growth rings does not necessarily correspond to theregion of varying tracheid dimensions in Sitka spruce.     

Growth response of coniferous stands to whole‐tree harvesting in early thinnings

A series of 15 field experiments was established to quantify the growth response of first‐thinning stands of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst) to whole‐tree harvesting and to estimate the need for nutrient compensation. The experiments were undertaken in Finland, Norway and Sweden and represent a wide range of site conditions. The site index (H ₁₀₀) of Scots pine stands varied from 19 to 29 m, and that of Norway spruce stands from 28 to 36 m. Total amounts of biomass and nutrients removed were calculated based on data obtained from felled sample trees. During the first 5‐yr period the growth response to the removal of logging residues varied considerably in both pine and spruce stands. Regression analyses did not reveal any functions that explained the variation in results satisfactorily. In cases where whole‐tree harvesting influenced tree growth negatively, this effect was counteracted by compensatory fertilization. It was concluded that to determine the response of remaining trees to harvesting intensity reliably, the post‐harvest period analysed must be longer than 5 yrs.     

Modelling the impacts of various thinning intensities on tree growth and survival in a mixed species eucalypt forest in central Gippsland,Victoria, Australia

The response of tree survival and diameter growth to thinning treatments was examined over 29 years, in various thinning treatments established in a 21-year-old even-aged mixed species regenerating forest in Victoria, Australia. The treatments were control, crown release, strip thinning and three different intensities of thinning from below (light, moderate, and heavy). Each treatment was replicated three times in a complete randomised design. Logistic and multilevel regression analyses showed that tree survival, growth and thinning response (change of tree growth due to a thinning treatment) were functions of tree species, size, age, removed and remaining competition, as well as time since the treatment. Mean annual tree diameter growth in unthinned stands was highest for Eucalyptus sieberi L. Johnson (1.9 mm) followed by Eucalyptus baxteri (Benth.) Maiden & Blakely ex J. Black (1.6 mm), and lowest for both Eucalyptus consideniana (Maiden) and Eucalyptus radiata (Sieber ex DC) combined (0.7 mm). Diameter growth increased with tree size for both E. sieberi and E. baxteri, but not for E. consideniana and E. radiata. Smaller trees were more likely to die due to shading and suppression than their larger counterparts. A mortality model suggested, however, that both shading and suppression had very little effect on trees in both E. consideniana and E. radiata species, which were less likely to die compared to trees in the other species. This result indicates that both E. consideniana and E. radiata species may be relatively shade tolerant compared with the other species. Total thinning response was a sum of positive (increased growing space) and negative (thinning stress) effects. Following thinning, smaller trees showed signs of thinning stress for the first one or two years, after which the highest percentage thinning response was observed. While larger trees were initially less responsive to thinning, the rate of decrease in the response for subsequent years was greater in smaller trees than larger ones. The average amount of thinning response showed similar trends to diameter growth increasing from E. sieberi (1.7 mm) through E. baxteri (0.6 mm) to both E. consideniana and E. radiata (0.5 mm). This translates into low average percentage thinning response in E. baxteri (34%), twice as much in both E. consideniana and E. radiata (69%) and highest overall percentage response in E. sieberi (87%). Thinning response and the duration of this response appeared to increase with thinning intensity and was still evident 29 years after thinning. Heavy thinning did, however, reduce the number of trees to a severely under-stocked condition, which prohibited optimum site occupancy, requiring 29 years of post-thinning development for the heavily thinned stands to regain their pre-thinning stand basal area.     

Two studies to assess the risk to Pinus sylvestris from Heterobasidion spp. in southern Sweden

Abstract

Pine stumps are not being treated against Heterobasidion spp. in Sweden. To determine whether they should be, the frequency of stump infections and the species of Heterobasidion involved were investigated in nine newly thinned pure Scots pine (Pinus sylvestris L.) stands in southern Sweden. The incidence of Heterobasidion was measured in roots of standing Scots pine in another 15 stands. Infections by both H. annosum (Fr.) Bref. s.s. and H. parviporum Niemelä & Korhonen were numerous in stumps six months after a summer thinning. The pathogen, mostly H. annosum, was found in 44 of 60 sampled root systems, from 14 of the 15 stands. Twenty of the infected pines were assessed as healthy on the basis of crown symptoms while 24 trees had defoliated crowns. Infected root systems were most frequent among trees with thin crowns in stands on former agricultural land, where previous thinnings had been carried out during the growing season when airborne spores are plentiful. The study suggests that stump treatment may be a profitable way to reduce disease development in Scots pine monocultures on sandy soils as well as in mixtures with Norway spruce [Picea abies (L.) Karst.] on any soil.     

Functions for Biomass Estimation of Young Pinus sylvestris,Picea abies and Betula spp. from Stands in Northern Sweden with High Stand Densities

New silvicultural regimes with high within-stand competition require new functions for estimation of standing stock and growth of biomass components, since the allometry of trees is changed by light competition. This paper presents functions for estimation of the aboveground biomass dry weights for stem wood, stem bark, branches and leaves of young (diameter at breast height <10 cm) Scots pine (Pinus sylvestris L.), Norway spruce [Picea abies (L.) Karst.] and birch (Betula pendula Roth. and Betula pubescens Ehrh.) trees growing in dense mixed stands. The functions were derived from a sample consisting of 84 Scots pine, 43 Norway spruce and 66 birch trees from six stands in northern Sweden with high stand densities (>10000 st ha^-1). The logarithmically transformed power function displayed a good ability to stabilize the variance of dry weights and showed a good fit to the material (0.37< R ² <0.99). A comparison with the most commonly used biomass functions in Sweden today showed that they overestimated the weight of stem wood and branches, while the weight of foliage was underestimated. The nature of these discrepancies suggested that the precision of biomass estimations might also be improved for young trees at wider spacing.     

Thinning around old oaks in spruce production forests: current practices show no positive effect on oak growth rates and need fine tuning

The expansion of spruce-dominated forestry in Southern Sweden during the twentieth century has led to a considerable amount of oak (Quercus robur L.) woodlands being converted into stands dominated by planted spruce. The thinning of spruces around oak trees is currently done in Sweden to improve local diversity of insects, oak growing conditions and eventually decrease their mortality. To evaluate the effect of these treatments, we dendrochronologically studied growth of old (100–200 years old) oaks subjected to thinning of different intensity at nine locations in southern Sweden, and compared them to oaks located in nearby pastures. The overall pattern suggests that commonly adopted thinning intensities do not significantly affect oak growth. Oak growth was positively related to oak age and negatively to the amount of dead oak crown. Analyses of correlations between oak growth and summer drought conditions, as reflected by location-specific chronologies of the Monthly Drought Code (MDC), indicated that older trees exhibited generally negative correlations, whereas the correlation remained generally positive for the younger trees, both inside and outside forest stands. We propose that removal of spruces should be primarily done around older and healthier-looking trees.     

Heterobasidion annosum infection of Picea abies following manual or mechanized stump treatment

Heterobasidion annosum (Fr.) Bref. s. l. colonization following thinning was studied in 1246 stumps of Picea abies (L.) Karst. trees from 14 previously unthinned stands in Sweden. Treatments included mechanized and manual application of (1) 35% urea solution, (2) Phlebiopsis gigantea (Fr.) Jül. spores, and (3) 5% solution of disodium octaborate tetrahydrate (DOT), and untreated stumps, cut in the summer and winter. Compared with untreated stumps cut in the summer, all stump treatments and winter cuttings significantly reduced the colonized stump area 6–7 weeks after thinning by 88–99%. Mechanized stump treatment provided as good protection as manual treatment against H. annosum infections. The probability of spore infection (p _ij ) was reduced by 53–83% in mechanized treatment and 79–98% in manual treatment compared with untreated summer thinning. In terms of p _ij , urea had significantly higher control efficacy than P. gigantea and manual treatment performed better than mechanized treatment.     

The effects of heavy thinning on stem quality and timber properties of silver birch (Betula pendula Roth)

A study was carried out into the effects of heavy thinning onstem quality and timber properties of silver birch (Betula pendulaRoth). Comparisons were made with lightly thinned and unthinnedbirch stands. Birch stands from the UK were also compared withsimilarly managed stands from Germany and Denmark. In general,trees from lightly thinned and unthinned stands had similarcharacteristics. Heavy thinning enhanced diameter incrementthrough greater ring width in comparison with the other treatments.The timber properties of basic density, grain angle and shrinkagecoefficients in the radial, tangential and longitudinal directions,however, were largely unaffected. More and bigger branches andgreater stem taper were found on trees from heavily thinnedstands, but these stems still met the current Finnish veneerbirch quality and dimension standards. Comparisons between birchstands, managed by heavy and light thinning, from the UK andGermany and Denmark revealed no meaningful differences in timberproperties. The results suggest that veneer dimension and qualitylogs could be produced in the UK in rotations as short as 40years on good sites if heavy thinning is adopted.