Effect of Temperature on the Induction of Bud Dormancy in Ecotypes of Betula pubescens and Betula pendula

The purpose of this study was to determine the influence of temperature applied during short day-induced budset on induction of dormancy in six ecotypes of Betula pubescens Ehrh. and two ecotypes of Betula pendula Roth. Seedlings were grown in a phytotron at constant temperatures of 9–21°C under a 12 h photoperiod (SD) during dormancy induction. Induction of dormancy was monitored by following bud flushing and shoot growth after transfer to long photoperiod conditions (24 h) at 18°C. Chilling requirement was studied in seedlings exposed to 10 weeks of SD. In both species induction of bud dormancy developed most rapidly at 15–18°C, and both 9–12°C and 21°C delayed the induction of dormancy. Raising the temperature (from 9 to 21°C) applied during induction of dormancy significantly increased the chilling requirement. These responses were noted for all ecotypes tested, but in general the northern ecotypes entered dormancy more quickly than the southern ones. No such trend was recorded for chilling requirement, although a B. pubescens ecotype from Iceland and another from the coast of northern Norway appeared to require a longer chilling treatment than the other ecotypes. In conclusion, induction and depth of bud dormancy in birch are significantly affected by temperature conditions and these effects may explain some of the annual variation in dormancy and chilling requirement observed in nature.     

木材微波干燥缺陷产生原因及其预防措施分析

从木材介电特性、微波穿透深度、微波设备、干燥工艺等方面分析了木材微波干燥缺陷产生的主要原因,并从优化干燥器设计,改善微波场分布均匀性,控制微波辐射功率和辐射时间,改变微波辐射方式等方面探讨了预防干燥缺陷产生的主要措施,以期为木材微波干燥技术的研究和应用提供参考。     

Dependence of dormancy release on temperature in different origins of Pinus sylvestris and Betula pendula seedlings

The chilling requirement of rest completion and the high temperature requirement of growth initiation were determined in three origins of silver birch (Betula pendula Roth.) seedlings and five origins of Scots pine (Pinus sylvestris L.) seedlings. In both the pine and birch the chilling requirement was highest in maritime Scottish origins and lowest in the most continental Finnish and Russian origins. The requirement for southern mountainous Spanish and Bulgarian pine origins was in between. In terms of the high temperature requirement, there were no clear differences between origins. These results suggest that owing to their high chilling requirement, which prevents the beginning of growth and the loss of frost hardiness during the frost‐exposed season, origins from a maritime climate could be the most tolerant under climatic warming.     

Effects of log storage and drying on birch (<Emphasis Type="Italic">Betula pendula</Emphasis>) wood proanthocyanidin concentration and discoloration

In conventional drying, sawn birch (Betula sp.) timber darkens and reddens from the inside while the layer a few millimetres under the yellowish surface remains light in color. Lack of information concerning the chemical basis of the discoloration hinders the development of a reliable solution for this problem. In this study, the role of soluble proanthocyanidins in discoloration of birch wood was investigated because the polymerization and oxidation of these compounds are known to yield insoluble reddish compounds. Different periods of log storage affected the synthesis of soluble proanthocyanidins during conventional drying. Concentration of proanthocyanidins also correlated with changes in the color of birch wood. Discoloration appeared differently in conventionally dried and vacuum-dried wood, which indicates that the discoloration mechanism in these drying methods may differ chemically, and/or the compounds that take part in discoloration may be different at different drying temperatures.     

Effects of Demand-driven Fertilization on Nutrient Use,Root:Plant Ratio and Field Performance of Betula pendula and Picea abies

Norway spruce [Picea abies (L.) Karst.] and silver birch (Betula pendula Roth) seedlings were grown for one season under three different fertilization regimens in the forest nursery. During the first 50 days the seedlings were grown in a glasshouse, and thereafter outdoors until the beginning of September. Finally, the plants were exposed to 16 h nights in the glasshouse throughout September. When the seedlings were supplied with fertilizers at a rate adjusted to expected plant demand (R_O), less than half as much of each nutrient was applied as in a conventional regimen (R_C), in which equal amounts were supplied per unit time during the growth season, yet the plants still looked healthy. Utilization of N increased by almost 50% in spruce when supply was adjusted to plant demand. In the third treatment (R_L), nutrients were supplied as in the R_O treatment, but at a growth-limiting rate. These plants were loaded with nutrients at the end of the season and had higher root:plant ratios, i.e. root weight in relation to total plant weight, compared with the other treatments. The nutrient status of the plants was not growth limiting at the end of the growing season in any of the treatments. The plants given the different treatments differed in size at planting out, but they had similar heights after 3 yrs in the field. This indicates that the root:plant ratio may be important for growth performance, provided that nutrient status is not at a growth-limiting level. This study suggests that the use of fertilizers can be considerably reduced in Swedish forest nurseries.     

Effect of Betula pendula Admixture on Tree Growth and Branch Diameter in young Pinus sylvestris Stands in Southern Finland

The effects of a birch admixture on the height and diameter growth and maximum branch diameter in planted Scots pine stands was studied using models constructed with a data set from 13 stands of 9–16 yrs of age and 2–8 m dominant height on average sites on mineral soils in southern Finland. The density and height of the birch varied highly between and within stands. Simulated results indicated that the pines were capable of keeping up in height growth with birches that had originated from seed. Even a very high number of birches (10?000 stems ha^?1) had virtually no effect on the height growth of the pines. The number of birches had a pronounced effect on the diameter growth and the maximum branch diameter in pine. Retention of a temporary birch component in young pine stands seems a feasible way of mitigating the adverse effects of low planting densities on the external quality of pine.     

Effect of harvest date,drying, short-term storage and freezing after chilling on the germination of rowan seeds

The effects of seed pretreatment and harvest date on the germination of European rowan (Sorbus aucuparia L) seeds were examined. In one experiment, seeds were subjected to drying, storage, soaking, warm and chilling treatments after harvesting in mid- and late August. In another experiment, fully imbibed (FI) seeds were given warm treatment for six weeks and then various durations of chilling (4?±?1°C) for up to 24 weeks. Thereafter, the seeds were adjusted to target moisture content of 35% and 30% or remained in the FI state and were then subjected to either subsequent chilling or freezing (?3°C) for up to 32 weeks. The treated seeds were allowed to germinate at a constant 15°C with 8 hours of lighting per day. Treatment effects were generally consistent for each harvest date. Seeds did not germinate unless they were chilled and germination rates were low unless the seeds were soaked. Warm treatment applied before chilling appeared to induce dormancy. The effect of storage varied with harvest date and storage treatment, with germination being highest for seeds harvested in late August. Mild freezing of ≥16 weeks duration following 16–24 weeks initial chilling resulted in >80% germination, more than could be achieved using chilling alone.     

Effect of site and elevation on wood density and shrinkage and their relationships in Carpinus betulus

This study examined the effect of site and elevation on the oven-dry density and volumetric shrinkage of hornbeam (Carpinus betulus) wood.For this purpose,45 normal hornbeam trees from three different sites (Mazandaran,Guilan and Golestan) at three elevations,300 m (low elevation),700 m (intermediate elevation) and 1100 m (high elevation) from natural forest in northern Iran were selected.Disks were cut at breast height from mature wood and test samples were prepared to determine physical properties,i.e.,wood density and volumetric shrinkage.The results show that there are significant differences between site and elevation on these physical properties of wood.The interaction effects between site × elevation on wood density and volumetric shrinkage were also statistically significant.At any fixed site,wood density and volumetric shrinkage increased with elevation.As well,their values at Guilan were higher than those at the other two sites.The relationship between wood density and volumetric shrinkage was determined by simple regression equations.Strong,positive relationships between wood density and volumetric shrinkage at each site were found.Again,these were stronger at the Guilan site than at the other two sites.Given a fixed site,the correlation at high elevation was stronger than at the other two elevations.     

Thinning effect on height and radial growth of Pinus thunbergii Parlat. trees with special reference to trunk slenderness in a matured coastal forest in Hokkaido, Japan

To evaluate the effect of thinning on a mature coastal Pinus thunbergii Parlat. forest in Hokkaido, northern Japan, we established four study plots with different thinning intensities (control and 20, 40, and 60 % thinned at individual base; each 20 m × 20 m) and monitored them for 10 years. Radial growth of individual trees in the 60 % thinned plot was significantly greater than that in the other plots, whereas height growth in the 60 % thinned plot was significantly lower than in the other plots. Applying the height growth contribution index, which represents the trade-off between relative height growth rate and relative diameter growth rate, revealed that individual trees in the control and weakly (20 and 40 %) thinned plots had invested more in height growth compared to trees in the 60 % thinned plot. Though higher trunk slenderness value (>80) indicates higher susceptibility to meteorological disturbance such as wind storm and heavy snow, trunk slenderness in the control and the weakly thinned plots increased significantly compared to that in the 60 % thinned plot. In this study, 44.3 % of trees in the control plot had trunk slenderness values >80 over a period of 10 years. The number of trees with trunk slenderness values >80 also increased in the weakly thinned plots. In contrast, no increase was observed in the 60 % thinned plot. In Japan, the thinning intensity is legally supposed to be <35 % of stand volume, which is not enough to improve tree architecture in terms of trunk slenderness.     

Influence of geographical location, site and silvicultural parameters, on volatile composition of Quercus pyrenaica Willd. wood used in wine aging

For the current study, the volatile and semi-volatile composition of several samples of Quercus pyrenaica wood from NW Spain were analyzed and compared. The research was performed on a wide sample set of more than 100 samples (test tubes) obtained from different stands of this species. The relationship between some silvicultural and site parameters and volatile composition was studied. Altitude seemed to be the most influential parameter on the volatile composition. However, other factors such as distance from tree center, average annual precipitation, and number of trees per hectare whose effects on the volatile compounds were not significant. The influence of soil texture was not a determining factor while geographical location seemed to have a more specific impact on the extractive volatile content. The content of all extractable compounds studied allowed a good separation of oak samples of the same species according to their geographical origin.     

Erratum to: Mechanical properties of wood in an unstable state due to temperature changes,and analysis of the relevant mechanism III: Effect of quenching on stress relaxation of chemically modified woods

In order to understand the mechanism of destabilization occurring when wood is quenched, we applied chemical modifications, and controlled the number of moisture adsorption sites in wood. The degree of destabilization was evaluated according to the fluidity (1-E _t/E ₀), increase in fluidity, and relative fluidity in relation to the nonmodified wood, and was discussed by comparing these quantities with the hygroscopicity or swelling of wood. We found that destabilization of chemically modified wood was lower than that in nonmodified wood, and the amount of adsorbed water controlled the magnitude of flow of wood. Moreover, according to the analysis of water state by the Hailwood-Horrobin equation, it was shown that the function of dissolved water to the fluidity is almost identical for both chemical modifications, whereas hydrated water has more effect on acetylated wood than on formaldehydetreated wood. We speculate that the motion of water molecules due to quenching accompanied with the redistribution of energy resulting from the exchange of their potential energy and movement to attain a new balance, and the introduced acetyl groups and cross-linking restrict the water molecule movement. An erratum to this article is available at .     

The influences of boiling and drying treatments on the behaviors of tension wood with gelatinous layers in <Emphasis Type="Italic">Zelkova serrata</Emphasis>

This study examined how boiling and drying treatments influenced various physical properties of the tension wood with gelatinous fibers (G-fibers) of a 29-yearold Zelkova branch. By boiling treatment, tension wood with numerous G-fibers contracted considerably in the longitudinal direction and the longitudinal Young’s modulus decreased in spite of the water-saturated condition. The drying treatment caused green tension wood and boiled tension wood with numerous G-fibers to shrink longitudinally and increased their longitudinal Young’s moduli. These specific behaviors in tension wood were highly correlated with the proportion of G-fibers in a specimen and were probably caused by the microscopic behavior of cellulose microfibril (CMF) in the gelatinous layers (G-layers). The longitudinal shrinkage of tension wood due to drying suggests the existence of a hygro-sensible, noncrystalline region in the CMF, which is abundant in the G-layer. Furthermore, the noncrystalline region in the CMF softens during boiling treatment, resulting in the reduction of the longitudinal Young’s modulus in tension wood. The longitudinal contraction of tension wood with G-fibers by boiling might be caused by the tensile growth stress remaining in green G-layers. However, no changes were detected in the 004 d-spacing of cellulose crystal in tension wood from the boiling and drying treatments, regardless of the proportion of G-fibers.     

Effects of serpentine substrate on vegetation and soil development with special reference to Picea glehnii forest in Teshio district, Hokkaido, Japan

Characteristics of vegetation and soils in the serpentine area of northern Hokkaido were studied in comparison with non-serpentine areas of the same region, and with other serpentine areas of Japan and elsewhere in the world. The relationship between vegetation and soils is discussed.

Although forest vegetation of northern Hokkaido is generally represented by deciduous forest, coniferous forest, predominantly Picea glehnii, develops in the serpentine area. Deciduous trees are limited both in number and in size. Forest floor is densely covered with Sasa kurilensis. The shrub layer is also well developed, whereas the herb layer is poor but contains characteristic species. Soils developing in the serpentine area are determined as Podzol (Wet Iron Podzol), while Brown Forest Soil is commonly found in the non-serpentine areas of the region. The serpentine soils are shallow and moist, showing general morphology and chemistry of podzolic soil in upper horizons of the profile. In lower horizons, however, physico-chemical properties are strongly affected by the parent rock. In comparison with other serpentine areas of Japan and elsewhere, northern Hokkaido is unique in that the vegetation is represented by a relatively closed forest of fair-sized trees, and the soils by a podzol.

Such Picea glehnii forests and podzolic soils are considered an intrazonal phytogeocoenosis strongly affected by serpentine substrate. In this regard, the cool and humid climate as well as undulating relief of northern Hokkaido are also important factors for the development of the unique phytogeocoenosis.