Net primary production of forests: a constant fraction of gross primary production?

Considerable progress has been made in our ability to model and measure annual gross primary production (GPP) by terrestrial vegetation. But challenges remain in estimating maintenance respiration (R(m)) and net primary production (NPP). To search for possible common relationships, we assembled annual carbon budgets from six evergreen and one deciduous forest in Oregon, USA, three pine plantations in New South Wales, Australia, a deciduous forest in Massachusetts, USA, and a Nothofagus forest on the South Island of New Zealand. At all 12 sites, a standard procedure was followed to estimate annual NPP of foliage, branches, stems, and roots, the carbon expended in synthesis of these organs (R(g)), their R(m), and that of previously produced foliage and sapwood in boles, branches, and large roots. In the survey, total NPP ranged from 120 to 1660 g C m(-2) year(-1), whereas the calculated fraction allocated to roots varied from 0.22 to 0.63. Comparative analysis indicated that the total NPP/GPP ratio was conservative (0.47 +/- 0.04 SD). This finding supports the possibility of greatly simplifying forest growth models. The constancy of the NPP/GPP ratio also provides an incentive to renew efforts to understand the environmental factors affecting partitioning of NPP above and belowground.     

Can predicted mountain pine beetle net production be used to improve stand prioritization for management?

Stand-level planning of lodgepole pine management can benefit from the use of mountain pine beetle susceptibility-risk model analyses to assign treatment priority. Priority is currently assigned based solely on relative levels of expected volume loss in the event of a mountain pine beetle outbreak. We evaluated the possibility to predict the relative contribution of brood beetles, by infested stands, to the next beetle generation. Existing data were used to develop generalized parameters for inclusion in predictive models of stand-level mortality and brood production. Model output for independent stands achieved a highly significant relationship with measured outcomes of brood productivity, indicating that relative levels of brood production can be predicted and incorporated into decision-models.     

Chemical characterization of smoke from the production process of wood-plastic composites

The chemical composition of unpleasant smell, emitted from the production process of wood-plastic composites using Manchurian ash sawdust (Fraxinus mandschurica Rupr.) and polypropylene powder as the raw material, was investigated. Wood sawdust and polypropylene powder were subjected to heat treatment to 290°C during 8 min (the conditions were similar to those employed on an industrial scale). The emitted compounds were collected and analyzed by gas chromatography-mass spectrometry (GC-MS). The analytical r...     

Length of cuttings in establishment and production of short-rotation plantations of Salix ‘Aquatica’

The effect of length of cuttings, 10 to 50 cm long, on establishment and productivity of short-rotation plantations was investigated in five trials, for periods of 2 to 9 years. The trials were established on abandoned agricultural fields planted with unrooted Salix Aquatica cuttings. The effect of cutting length was very similar in all five trials: the longer the cuttings (up to 30–50 cm), the better the survival and growth. In most trials the greatest difference in survival was between cutting lengths of 10 and 20 cm, especially in unfavorable growing conditions. In an annually harvested trial during the 9-year test period, a cutting length up to 30 cm affected biomass production per stool positively. In two trials grown with 5-year rotation, the longest cuttings produced 7 times the above-ground biomass of the shortest ones. Results of these trials also emphasize the importance of establishment for the future success of willow plantations.     

Simultaneous saccharification and fermentation of steam-pretreated lespedeza stalks for the production of ethanol

1 Introduction Ethanol is now recognized as a potential alternative to petroleum-derived vehicle fuels, and offers environ- mental advantages. The combustion of biofuels does not result in a net contribution of CO2 to the atmos- phere, so they do not contribute to the greenhouse ef- fect. Lignocellulosic material is the most abundant renewable resource available for the production of fuel ethanol. The cellulose and hemicellulose fractions of lignocellulosic material can be hydrolyzed to sugar…     

Effects of an environmental friendly slow-releasing woodchip fertilizer on cabbage production

Wood from three tree species was used for making slow-releasing woodchip fertilizer. Fertilizer made from Populus tomen-tiglandulosa retained the highest amounts of N (29.04%), P2O5 (26.03%) and K2O (16.93%). On the other hand, woodchip fertilizer made from Pinus koraiensis retained the lowest amounts of N (26.22%), P2O5 (21.80%) and K2O (14.49%). A field experiment was performed in a 50 m2 experimental plot at Gangwon Agricultural Research and Extension Services, Chuncheon, Korea from August to November 1999. The effects of a general fertilizer along with compost and slow releasing woodchip fertilizer without compost on the cabbage production were observed. Cabbage production parameters, such as top height, head weight, head height, head width, number of outer and inner leaves, leaf width and head length, increased in the field where Larix kaempferi woodchip fertilizer was added as a basal dose. The result showed that the woodchip fertilizer made from Pinus koraiensis had faster releasing properties compared to other woodchip fertilizers. Without adding any compost in the woodchip fertilized field, woodchip fertilizer showed a superior outcome over a general chemical fertilizer. Although the amount of woodchip fertilizer was larger compared to that of a chemical fertilizer, it increased cabbage production.     

Storage of biomass and net primary productivity in desert shrubland of Artemisia ordosica on Ordos Plateau of Inner Mongolia, China

Biomass and net primary productivity （NPP） are two important parameters in determining ecosystem carbon pool and carbon sequestration. The biomass storage and NPP in desert shrubland of Artemisia ordosica on Ordos Plateau were investigated with method of harvesting standard size shrub in the growing season （June-October） of 2006. Results indicated that above- and belowground biomass of the same size shrubs showed no significant variation in the growing season （p〉0.1）, but annual biomass varied significantly （p〈 0.01）. In the A. ordosica community, shrub biomass storage was 699.76-1246.40 g.m^-2 and annual aboveground NPP was 224.09 g-m^-2·a^-1. Moreover, shrub biomass and NPP were closely related with shrub dimensions （cover and height） and could be well predicted by shrub volume using power regression.     

The importance of proleptic branch traits in biomass production of poplar in high?density plantations

Branch phenotypic traits determine tree crown architecture, which in turn governs leaf display, light inter-ception, and biomass production. Sylleptic and prole...     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Ecophysiology and multivariate analysis for production of Tachigali vulgaris in Brazil:Influence of rainfall seasonality and fertilization

Studies on fertilization management of species native to the Amazon for energy plantations contribute to the diversity of species use and reduce biological risk due to the excessive use of clones or hybrids of Eucalyptus.This study evaluates the effect of precipitation seasonality and phosphorus and potassium fertilization on gas exchange in a Tachigali vulgaris plantation.Three levels of P(zero,65.2,130.4 kg ha^-1) and three of K(zero,100.0,200.0 kg ha^-1)were applied in a 3...     

The production and use of knowledge in regulatory impact assessment – An empirical analysis

Regulatory Impact Assessment (RIA) – understood as the formalised analytical activities initiated or carried out by central government administrations when designing specific policy instruments – is currently receiving high levels of political attention. It is seen as a tool to improve regulatory quality and to promote cross-cutting objectives such as sustainable development. Often conceived as an economic analysis of costs and benefits, RIA tends to be depicted as a ‘neutral’ assessment process that informs decision-makers about ‘facts’. This does not explain, of course, why RIA often becomes an arena for political conflict involving both government departments and stakeholders. Based on empirical research on the design and practical application of RIA across the European Union, this paper explores the relationship between RIA, policy-making and politics. The aim is to shed light on what knowledge is produced, how it is used by different actors and what role it plays in decision-making. Based on this analysis, we explore to what extent and under what conditions RIA can serve as a tool for more evidence-based and sustainability oriented policy-making processes.     

Field-scale influence of karité (Vitellaria paradoxa) on sorghum production in the Sudan zone of Burkina Faso

Sorghum (Sorghum bicolor L. Moench) production in 15 transect blocks, each with a karité (Vitellaria paradoxa C. F. Gaertn.) tree at each end, was evaluated on-farm in a village of southern Burkina Faso in a season of below-average rainfall. Under tree crowns, plant height and grain yield were significantly lower, by a factor of 16% for grain yield, than elsewhere in transects. In addition, mean plant height, and mean biomass and grain production per area as well as per plant were higher at the outside edge of tree crowns than in the middle of the field. Soil moisture content decreased significantly with increasing distance from the tree in the 0–20 cm soil layer. Top soils were also richer in organic carbon and potassium around tree crowns than in the middle of blocks. Sorghum performance in the zone under and around canopies was projected at field scale and compared to central transect controls. Grain production in karité parklands was higher with trees of mean crown radii of 225 to 275 cm, average densities of 12 and 31 trees/ha than in areas without trees. Therefore, farmers do not improve cereal production by reducing parkland tree densities below these levels. When nut production is included in the analysis, maintaining trees in fields can be economically advantageous at all densities.This revised version was published online in November 2005 with corrections to the Cover Date.     

Can forest trees compensate for stress-generated growth losses by induced production of volatile compounds?

Plants produce a variety of volatile organic compounds (VOCs). Under abiotic and biotic stresses, the number and amount of produced compounds can increase. Due to their long life span and large size, trees can produce biogenic VOCs (BVOCs) in much higher amounts than many other plants. It has been suggested that at cellular and tree physiological levels, induced production of VOCs is aimed at improving plant resistance to damage by reactive oxygen species generated by multiple abiotic stresses. In the few reported cases when biosynthesis of plant volatiles is inhibited or enhanced, the observed response to stress can be attributed to plant volatiles. Reported increase, e.g., in photosynthesis has mostly ranged between 5 and 50%. A comprehensive model to explain similar induction of VOCs under multiple biotic stresses is not yet available. As a result of pathogen or herbivore attack on forest trees, the induced production of VOCs is localized to the damage site but systemic induction of emissions has also been detected. These volatiles can affect fungal pathogens and the arrival rate of herbivorous insects on damaged trees, but also act as signalling compounds to maintain the trophic cascades that may improve tree fitness by improved efficiency of herbivore natural enemies. On the forest scale, biotic induction of VOC synthesis and release leads to an amplified flow of BVOCs in atmospheric reactions, which in atmospheres rich in oxides of nitrogen (NOx) results in ozone formation, and in low NOx atmospheres results in oxidation of VOCs, removal in ozone from the troposphere and the resulting formation of biogenic secondary organic aerosol (SOA) particles. I will summarize recent advances in the understanding of stress-induced VOC emissions from trees, with special focus on Populus spp. Particular importance is given to the ecological and atmospheric feedback systems based on BVOCs and biogenic SOA formation.     

Essential oil production increases value of Psiadia altissima fallows in Madagascar’s eastern forests

Fallow with Psiadia altissima is one of the most common post-‘slash and burn’ vegetation successions described in the evergreen forests of eastern Madagascar. Some fallows consist of almost pure stands of this species, of which the leaves produce an essential oil offering international commercial interest. The present research aims to evaluate the production potential of essential oil derived from different fallows rich in P. altissima. The study has revealed that fallows aged 4 and 6 years since the last crop abandonment produce the most essential oil (around 20 l ha⁻¹), but relative to fallow duration, the youngest fallows (1- or 2-year-old) are the most productive, respectively producing 12 and 6 l ha⁻¹ year⁻¹. Additionally, the trees from the youngest fallows have a substantial capacity for regeneration from coppice shoots, on condition that the cut is performed well above the root collar. Although farmers earn five times less from harvesting leaves than from cultivating rice from tavy, the possibility is there for them to complement their income and diversify their production. The overall results show that sustainable exploitation of fallows of P. altissima is a conceivable option. However, this can only be achieved through an integrated approach that takes into account the environmental and social constraints associated with the development of this new activity.     

Stress-wave velocity of trees and dynamic Young’s modulus of logs of 4-year-old Eucalyptus camaldulensis trees selected for pulpwood production in Thailand

Eucalyptus camaldulensis Dehnh. is extensively planted in Thailand to produce wood chips used as raw material for pulp and paper. To promote the utilization of the wood from plantation-grown E. camaldulensis for solid lumber, stress-wave velocity of trees and dynamic Young’s modulus of logs were investigated for 4-year-old trees of eight half-sib families selected for pulpwood production on the basis of the growth characteristics in the previous tree breeding program. For the eight families, the mean stem diameter at 1.3 m above ground level and mean tree height were 7.6 cm and 11.9 m, respectively. The mean stress-wave velocity of eight families was 3.45 km/s. Dynamic Young’s modulus of logs ranged from 7.88 to 17.64 GPa, and the mean value for the eight families was 11.72 GPa. Stress-wave velocity of trees was significantly correlated with dynamic Young’s modulus of logs, suggesting that dynamic Young’s modulus of wood can be evaluated nondestructively by stress-wave velocity of trees. Significant differences in stress-wave velocity and dynamic Young’s modulus of logs were obtained among families. Thus, to promote the utilization of E. camaldulensis wood for solid lumber production, selection of trees with high Young’s modulus should be applied to trees already selected for the growth characteristics in the previous tree breeding program.     

打造中国竹子网www.chinesebamboo.net

研制了国内外目前内容最为丰富、功能最为完善的竹子网站http://www.chinese-bamboo.net,并且在页面上不断优化,功能上不断完善,以期成为中国竹子的专业数据和信息平台。     

The characteristics of financing arrangements for the production and marketing of shea (Vitellaria paradoxa) butter in Tamale in the Northern Region of Ghana§

Shea (Vitellaria paradoxa) butter is an important internationally recognised economic commodity because of its food and medicinal potentials. However, access to finance for small-scale forest enterprises such as shea butter production and marketing remains a fundamental problem, which affects the growth and performance of these enterprises. This study, therefore, assessed the financing schemes and delivery mechanisms available for the production and marketing of the product in Tamale, Northern Region of Ghana. It also identified the financial structures available to shea butter producers, including constraints of the financial delivery mechanisms. Using a social survey, the study purposively selected and interviewed 83 women who engaged in shea butter processing. Of these, 86% were full-time processors of shea butter and 14% were involved in other businesses, such as petty trading, groundnut and rice processing. The study revealed low patronage of financial services as only 18% of the respondents took loans. A high proportion (82%) of the respondents were under contract financing with companies that purchased the shea butter. This financing arrangement made it difficult for the women to expand their activities as they usually were unable to negotiate and receive competitive prices for their shea butter. Non-governmental organisations and some financial organisations were involved in providing technical support services to the producers. However, there was an absence of continuous support services in credit management. The high illiteracy rate (97%) of shea butter producers made it challenging for the women to access formal training programmes to make them aware of opportunities that exist for financing their business. There is the need for targeted collaboration among stakeholders to improve existing financing schemes. In the long term, there should be policies to standardise the activities of the shea butter industry to improve access to credit, which could lead to the sustainable growth of these enterprises.     

Agricultural residues in panel production – Impact of silica particle content and morphology on tool wear

Abstract

Considering ongoing global deforestation and the increased demand for raw materials in all wood-processing sectors it is necessary to seek and employ alternative resources. Agricultural residues are potential sources of alternative lignocellulose-based raw materials. Research on substitute materials for wood panel production mainly focused on physical and mechanical properties of boards while much remains to be learned about machining. Therefore, studies were carried out to analyse the relationship between ash and silica content and their impact on tool wear. Ash and silica contents of agricultural residues were determined following ISO 3340. Particle morphology and elemental composition of selected materials were analysed using scanning electron microscopy and energy-dispersive X-ray analysis. Tool wear tests were carried out using particleboards made from wheat straw, canola straw and spruce. Analyses of various plant materials displayed no correlation between ash and silica content. Bio-mineralised silica structures in wheat and canola were different compared to coarse silica found in wood-based particleboard. Tool wear caused by these agricultural residues was just moderately increased compared to wood, despite the fact that their silica contents were many times higher. Furthermore, the impact of abrasive substances on wear behaviour was influenced by the density of the panels.     

Litterfall production in forests located at the Pre-delta area of the Paraná River (Argentina)

? The objectives of this study were to measure litterfall production of the four floodplain forest types and to analyze the relationship between litterfall (forest type, dominant species, and organic fractions) and flood pulses.

? Litterfall production was measured in two mono-specific stands of Salix humboldtiana or Tessaria integrifolia, respectively, and two mixed forests dominated by A. inundata or Nectandra angustifolia, during 1998 and the 2000–2002 periods.

? Mono-specific stands presented similar productivities (6.8 and 6.5 Mg dry matter ha^?1 y^?1, respectively), but differed significantly from the two other. The highest litterfall production was obtained during the large flood that occurred during 1998, decreasing later throughout the study period. Leaves were the dominant fraction of litterfall, followed by branches, flowers, and fruits.

? Only S. humboldtiana, T. integrifolia and A. inundata forests showed distinct patterns of litterfall production, depending on the flooding pulse. N. angustifolia did not show a distinctive litterfall pattern.

? The forests studied here presented patterns of litter production associated with the flood pulse according to its location along a topographic gradient, that controls the litter productivity of these forests.