A comparison between three different methods of measuring knot parameters in picea abies

Both foresters and sawmillers are interested in the knot structure of trees; in particular, position and number of knots, knot diameter, knot length and dead knot border. For research purposes, it is possible today to carry out non‐destructive measurements using computer tomography (CT) and image analysis. The aim of this study was to measure knot parameters on Norway spruce (Picea abies (L.) Karst.) using a non‐destructive method developed for Scots pine (Pinus sylvestris L.), and to compare the results of this method with the results of two different destructive methods. In order to do this, two Norway spruce stems were scanned by CT. Then five logs from one stem were cut into flitches 20 mm thick and the defects on the sawn surfaces were scanned manually. The other stem was cut just above every whorl and then each knot was split through its centre and the knot parameters were measured manually. The study showed that the CT method compares well with the destructive methods. It is a reasonably fast, non‐destructive method which measures position and diameter of knots and detects larger knots with acceptable accuracy. The study also showed that a large number of smaller knots were not found by the CT method and that the CT method measured knot length and dead knot border with low accuracy. This means that the CT method has to be adjusted to Norway spruce in order to improve its ability to measure knot length and dead knot border and to detect smaller knots.     

Predicting Knot Diameter of Pinus sylvestris in Sweden

Average diameter of the thickest knot of each whorl within a specific stem section of Scots pine (TK) was studied using functions based on growth ring widths, diameter of dry branches, site index, stand age, and latitude. Data from the Pine Stem Bank - a database of external and internal properties where knots were detected by computerized tomography (CT) scanning - were used. A high value of the corrected coefficient of determination, R²(adj)=0.63, was found between TK and two independent variables, average width of growth rings 11 - 20 at stump height and latitude. It is argued that TK is a good parameter for describing timber quality, and that it now is predictable on standing trees as well as on existing data from the National Forest Inventory (NFI). An attempt was made to quantify the change in the TK - value by site index, tree class, age class, and region by applying functions to NFI data from 1988 - 92. In a second analysis, also based on NFI data, the TK - value had increased by 17% from 1966 to 1988 - 92. The authors believe that this is mainly a result of the silvicultural systems used and that it is possible to reverse the negative trend by changing silvicultural methods.     

Predicting knottiness of Pinus sylvestris for use in tree bucking procedures

Abstract

The quality and accompanying value of Scots pine (Pinus sylvestris L.) lumber varies markedly in the Nordic countries. Consequently, tree bucking has a great impact on the economic result. The objectives of this study were (1) to analyse which knot characteristics usually reduce pine lumber sawn from the butt-logs to the next quality grade, (2) to determine the most appropriate characteristics that could be used in predicting lumber quality, and (3) to develop models that could be used in practice for predicting the probability of certain quality grades. The study was based on field experiments and test sawing data on 100 Scots pine stems from south-western Finland. Since the results showed that the maximum dead knot is the most crucial knot characteristic when the first cross-cutting point is determined, models were created that predict the height of the first dead knot that lowers grade A to B (B-grade dead knot). Both early growth rate and dead branch height should be measured to predict pine butt-log quality. Early growth rate seems to be appropriate in predicting between-stand variation, while dead branch height is appropriate for predicting within-stand variation.     

Modelling of knots in logs

A geometrical model was derived to describe knots in logs and on the surface of lumber beams sawn from those logs. Each knot is defined by 7 parameters related to the shape and position in the stem. A computer simulation program was written to study knot shapes on a variety of observation planes.An initial investigation on the shape of knots in Scots pine logs and lumber beams suggests that the model is sufficiently accurate to describe knottiness in this species. Potential applications of this model include automated lumber grading, computerized log reconstitution and yield optimization studies.This research was carried out when the author was a Visiting Scientist at the Technical Research Centre of Finland (VTT), Forest Products Laboratory, P.O. Box 207, SF-02151 Espoo, Finland. Technical assistance of U. Saarelainen, A. Usenius and C. O. Sommardahl from VTT is gratefully acknowledged. This work was partially supported by Forestry Canada and the Natural Sciences and Engineering Research Council of Canada     

Effects of commercial thinning,log position in the stem,and cutting width on the surface quality of cants produced by a chipper-canter

Fifteen stems of jack pine (Pinus banksiana Lamb.) of 3 commercial thinned plots (control, moderate, and intensive thinning) and 15 stems of black spruce (Picea mariana (Mill.) B.S.P), both coming from the Abitibi-Témiscamingue region – Canada, were cross-cut into three 2.4?m length sections: bottom, middle, and top logs. Logs were processed with a chipper-canter at three cutting widths (12.7, 19.1, and 25.4?mm), producing chips and a three-faced cant. The middle section of the cant was used to evaluate surface quality across the grain on each face. Roughness and waviness parameters and depth of torn grain were recorded. Knot characteristics were assessed in the three cant faces. Poorer surface quality was found in the lower part compared to the upper part of the cant for both species. At larger cutting widths, jack pine logs coming from a natural stand showed lower surface quality compared to logs from thinned stands. Black spruce waviness increased with the cutting width and stem height. These results were attributed to the increase of forces and vibration when cutting at larger cutting widths, which was worsened by the presence of bigger, more numerous knots at the control plot and in the top logs. Black spruce had deeper torn grain compared to jack pine. Their differences in knot characteristics resulted in a maximum torn grain depth favored by the presence of more knots rather than by bigger knot size. Other knot characteristics, such as the position of the knots in the cant face, the insertion angle of the branch and the distribution of the knots around the log, should be studied to better understand the relationship between torn grain formation and knottiness.     

Patterns of Stem Damage by Moose (Alces alces) in Young Pinus sylvestris Stands in Sweden

The incidence of recent moose browsing of the main stem on young Scots pine (Pinus sylvestris L.) trees, and correlations with tree or stand characteristics, were examined using data from a large-scale survey in Sweden. On average, 10% of all Scots pine main stems showed one or more types of recent damage, with browsing of the apical leader accounting for about 75% of all damage recorded. Stripping of bark off the main stem occurred most frequently in the southern area, where site productivity is highest. Apical leader browsing was negatively correlated with height of the main stems, length of the apical leader and incidence of pre-commercial thinning, whereas bark stripping and stem breaking were positively correlated with the same variables. All types of recent stem damage correlated positively with the extent of previous stem damage and also with the extent of recent browsing of lateral shoots.     

Development of Pinus sylvestris Main Stems Following Three Different Precommercial Thinning Methods in a Mixed Stand

Reducing competition by point cleaning may be an attractive alternative to conventional precommercial thinning in forestry. In this study, survival and development of main stems of Scots pine (Pinus sylvestris L.) following point cleaning were examined in a mixed stand of mainly Scots pine and birch (Betula pendula Roth and Betula pubescens Ehrh.) in northern Sweden. Treatments studied were: no precommercial thinning, conventional precommercial thinning, point cleaning of all secondary stems, and point cleaning of only the secondary stems that were higher than the main stem, within a radius of 0.8 m from the main stem, respectively. A randomised complete block design with three replicates was used. Measurements taken 13 growing seasons after these treatments showed that conventional precommercial thinning was the best treatment for retaining Scots pines as main stems. However, conventional precommercial thinning resulted in the poorest timber quality of the remaining Scots pines in terms of stem taper, thickest branch diameter and relative live crown height. In conclusion, point cleaning has to be followed by a complementary cleaning operation if the objective is to retain Scots pines as main stems in such mixed stands.     

Basal sweep and compression wood in young Scots pine trees

This study demonstrates the correlation between stem form and compression wood content in 36 sampled trees from a 6-yr-old container grown Scots pine ( Pinus sylvestris L.) plantation in central Sweden. Root analyses were carried out to examine causes for the high incidences of basal sweep. On the sampled trees basal sweep, stem sweep and maximum bow-height were measured. Discs were cut at different heights and the compression wood content was analysed using digital image analysis. Pith eccentricity and out-of-roundness were calculated for each disc as well as per stem. Compression wood and pith eccentricity was most pronounced near the stem base, where sweep tends to be high. In general, pith eccentricity increased with degree of basal sweep. As a conclusion, expression of basal sweep can be used to predict compression wood content in young Scots pine trees. This study also shows the importance of anchoring of a tree to prevent basal sweep formation due to instability.     

Carbon footprint including effect of carbon storage for selected wooden facade materials

Abstract

The outer facade constitutes a substantial volume of the total consumption of materials used in a building and the need for maintenance of the facade makes it especially interesting from a life cycle perspective. The range of wooden materials and products used for facades has different impacts over the life cycle, but the analyses so far have not included a time-adjusted global warming potential (GWP). Wooden facade materials were assessed with respect to their life cycle carbon footprint based on the environmental product declarations (EPD) and adjusted according to EN15804. The results showed low impacts of untreated Scots pine heartwood (≈1 kg CO₂-eq. per square meter [m²]), medium for thermally modified Scots pine, coated Norway spruce and oil/copper–organic preservative-treated Scots pine (1–5 kg CO₂-eq. per m²) and high for furfurylated Scots pine and acetylated Radiata pine (5–10 kg CO₂-eq. per m²). The results with time-adjustment showed that these methods have a potential large effect on the carbon footprint of wooden claddings. The inclusion of biogenic carbon flows and timing seems to be more important than the difference between the product when biogenic carbon is not included. This fact highlights the importance time-adjusted GWP would have for wood products EPDs.     

Differences in Agrobacterium infections in silver birch and Scots pine

The aim of this study was to investigate the differences in infections caused by Agrobacterium tumefaciens in a conifer, Scots pine (Pinus sylvestris), and in a non-host deciduous species, silver birch (Betula pendula). All the Agrobacterium tumefaciens strains tested caused crown-gall formation in both tree species, but the infection rates varied remarkably. In Scots pine, the development of galls was rare, and slower than in silver birch. Inoculation into the base of the stem were the most successful in gall induction. Silver-birch galls were large, often surrounding the whole stem, in contrast to Scots pine galls, which were characterized by their small size and neck-like connection with the host plant. In silver birch, no other morphological changes could be seen. In Scots pine, abnormal phenotypes with proliferating short shoots above the galls were observed during the second and third growing season. The results indicate that, of the two non-host tree species, the deciduous one, silver birch, is more susceptible to an A. tumefaciens infection than the conifer, Scots pine. The matrix for A. tumefaciens infection in silver birch differs from that in Scots pine, since the terpene compounds of Scots pine seem either to kill the agrobacteria or to suppress their growth. The differences between the species could be partly caused by their difference in sensitivity to phytohormones. These features reflect evolutionary incompatibility between A. tumefaciens and a gymnosperm.     

Models of Internal Knot Diameter for Pinus sylvestris

The objective of this investigation was to develop models describing the vertical variation in internal knot size of Scots pine (Pinus sylvestris L.) stems. The sawlog portion of 198 mature trees was scanned using computed tomography in order to measure internal knot size. The variation in knot diameter at the sound/loose knot border was described in terms of a non-linear segmented (hyperbolic-quadratic-quadratic) model, and as a function of stand variables, tree variables and height above ground. A second, simpler (hyperbolic-quadratic) model which was deemed easier to implement was also presented. Although no validation data set was available, the models performed adequately for trees with different growth rates, growing on different sites and being at different stages of development. These results are intended to be integrated in a model system for conversion simulation studies applicable to mature trees.     

Predicting Log Type and Knot Size Category Using External Log Shape Data from a 3D Log Scanner

The use of new technology such as 3D scanners for measuring log shape at sawmills is increasing. These scanners can provide a detailed model of log shape and evenness of the log mantle area. These data can be used for optimizing yield but also for predicting quality of the sawn goods. This report presents a model for quality - related log features based on data from a 3D log scanner. The model includes routines for development of variables related to four categories of log properties: surface unevenness, log taper, cross - sectional out - of - roundness and straightness. In total, 230 Scots pine (Pinus sylvestris L.) logs are used for developing and validating logistic regression models for sorting logs into classes of log type and knot size. The models are tested on validation data: 97% of the logs were sorted correctly according to log type and 79% were sorted correctly according to knot size.     

Long-term trends in height growth of Picea obovata and Pinus sylvestris during the past 100 years in Komi Republic (north-western Russia)

Abstract

Adapting forest management practices to the changing environment of Komi Republic requires an understanding of the response of unmanaged natural forests to climatic changes. Komi Republic is a region of north-western Russia where large areas of natural boreal forest still exist. Apical growth of Scots pine (Pinus sylvestris L.) (108 trees, 529 discs) and Siberian spruce (Picea obovata Ledeb.) (88 trees, 423 discs) was analysed using stem analysis techniques. Mean apical growth curves were calculated for four zones of boreal forests in two subsequent 50 year periods starting from 1900. A statistically significant increase in height increment of 40% for Siberian spruce and 30% for Scots pine was identified from samples representing the Komi Republic. Within this region statistically significant height increment increases were found in the middle taiga zone for Siberian spruce of 240% and Scots pine of 140%, while northern taiga Siberian spruce increased by 164%. Taking into account that trees were samples in remote untouched pristine forests, the main causes of increased height increment are suggested to be climatic, which shows a large increase in temperature (0.43°C during the past 30 years) and a modest decrease in precipitation (2.2% over the past 30 years).     

帽儿山地区不同种源樟子松树轮对气候因子的响应

[目的]为了进一步了解不同种源的樟子松在帽儿山地区的生长差异,研究该地区气候因子对樟子松径向生长的影响,本文建立了来自于阿尔山、高峰、红花尔基、卡伦山、图强罕达盖和金山等7个种源樟子松树轮年表。[方法]通过年轮-气候响应分析、相关分析、主成分分析,探讨了不同种源樟子松径向生长与气候因子的响应差异。[结果]表明:7个种源地樟子松树轮年表整体变化趋势基本相似,但局部也有不同之处,除图强种源外,其余6个种源地樟子松在生长初期年轮宽度呈增加趋势。阿尔山、高峰、红花尔基和卡伦山种源地樟子松径向生长与当年2月平均温度显著正相关,罕达盖种源地樟子松径向生长与前一年4月平均温度显著正相关;高峰、图强、卡伦山种源地樟子松径向生长与当年6月降水显著正相关,阿尔山、高峰、金山、卡伦山、红花尓基、图强种源樟子松的径向生长主要与前一年8月降水显著负相关。[结论]多数种源的樟子松在初期径增长较快,与当年2月份的温度和6月份的降水量有正相关的响应性,而与前一年8月份的降水量有负相关的响应性。     

Reconstruction of Pinus Sylvestris knots using measurable log features in the Swedish Pine Stem Bank

Abstract

The objective of this study was to develop a method for reconstruction of parametrically described whorls and knots from data possible to extract from industrial scanning of logs, using X-ray scanners. The method was conceived using the logs in the Swedish Pine Stem Bank as a foundation, and was based on a few predictor features extracted from these logs; namely whorl volume, distance between whorls and distance between pith and surface. These features were not measured in images but calculated from existing parameterised knots. Simulated test sawing shows that the reconstruction method results in a representative model of the knot structure in the log, when considering the grade distribution of the sawn timber produced by the simulation program. The results of this study could, for instance, be used for improved online quality predictions at sawmills. One step in this direction is to use industrial X-ray data to enlarge the amount of log data available for sawing simulation research. Future work can, therefore, focus on developing a practical application of the results presented here.     

Predicting lumber grade and by-product yields for Scots pine trees

The purpose of this study was to develop models for estimating yields of lumber grades and by-products of individual Scots pine (Pinus sylvestris L.) trees using stem and crown dimensions as explanatory variables. Two separate data sets were used: (1) one simulated by the process-based growth model, PipeQual, which provides information about stem form and branch properties. The model was used to predict the 3D structure of Scots pine stems from thinning regimes of varying intensity and rotation periods and (2) an empirical data set with detailed 3D measurements of stem structure. The stems were sawn using the WoodCim sawing simulator and the yields and grades of the individual sawn pieces, as well as by-products, were recorded. The sawn timber was classified on A, B, C and D-grades for side and centre boards separately (Nordic Timber grading). By-products were pulpwood, sawmill chips, sawdust and bark.     

Scarification and Seedfall affects Natural Regeneration of Scots Pine Under Two Shelterwood Densities and a Clear-cut in Southern Sweden

A study was undertaken to evaluate the effect of Scots pine (Pinus sylvestris) shelterwood density and timing of removal on the regeneration of forests with improved wood quality. This paper focuses on the effect of scarification and seedfall on the success of natural regeneration of Scots pine under two shelterwood densities and in a clear-cut. Wood quality aspects will be addressed later in the study. After 4 yrs, natural regeneration of Scots pine under a 200 stems ha^-1 shelterwood reached 90000 seedlings ha^-1, 53000 under a 160 stems ha^-1 shelterwood and 3700 in a clear-cut. The high natural regeneration under the densest shelterwood resulted from a high seedfall, slower invasion by competing vegetation, consequent prolonged recruitment and low mortality. Since mortality largely decreased for both shelterwood densities and recruitment seems to continue, the success of regeneration should be maintained in the future if proper release operations are conducted. The latter could begin when seedlings reach a height of about 0.5 m and the cover should be maintained until they reach a height of about 6 m. Therefore, it may be possible to use 200 stems ha-1 Scots pine shelterwoods in southern Sweden to obtain dense stands and thus improve wood quality (stem taper, wood density, etc.).     

Seedling shoot,needle and bud development in three provenances of Pinus sylvestris and Pinus contorta cultivated in northern Sweden

The patterns of current‐year shoot, needle and terminal bud elongation in seedlings of three Scots pine (Pinus sylvestris L.) and three lodgepole pine (Pinus contorta Dougl. var. latifolia Engelm.) provenances were compared during the third and fourth growing seasons after planting. Lodgepole pine produced longer shoots and buds than did Scots pine, mainly because lodgepole pine formed more stem units and elongated at a faster rate. Stem unit length and the duration of shoot and bud elongation differed relatively little between species and provenances. Lammas or polycyclic growth occurred in some lodgepole pine provenances, but not in any Scots pine provenance, and was associated with enhanced shoot elongation. Needle elongation commenced earlier, proceeded at a faster rate, and was greater in lodgepole pine than in Scots pine, but ceased about the same time in all species and provenances. The heat sum required to attain 50% of final length was lower for shoots and needles in lodgepole pine than in Scots pine, and for shoots in northern provenances than in southern ones. Mitotic activity in the apical meristem of the terminal bud, which occurred less than one week after the seedlings were free from snow, started and ceased about the same time in each species, but was higher in lodgepole pine than in Scots pine early in the shoot elongation period.