One-cycle Control Three-phase Four-wire Active Power Filter with Four-arm

This paper presents a three-phase four - wire active power filter based on one-cycle control. This method need not sense the three phase load currents or the three phase voltages, need not use any multipliers. It has simplified circuit , and the controller is composed of four integrators with reset along with several flip-flops, comparators and some analog components. The main circuit switching frequency is constant, which is desirable for industrial applications. Analysis and simulation are carried out with the four-arm inverter, the simulation results verify that the APF with one-cycle control can dynamically and effectually compensate the harmonics, reactive current and zero sequence current.     

Control Method of Single-phase APF

As one-cycle controlled single-phase active power filter(APF) only can compensate harmonics and reactive currents simultaneously,this paper detects circuit based on instantaneous reactive theory and current traces control circuit based on one-cycle control with harmonic current.The control equations and circuit are set up.The results of simulation verify that this scheme is effective and APFs can compensate harmonic and reactive current according to requirement with the distorted source voltages.     

Research on a Novel Inverter of VSC

In order to improve waveform performance of light HVDC system, a lot of switches which operate in high frequency are used, which causes large switching losses and results high cost. A new Buck type voltage source converter(BVSC) is proposed. The new BVSC comprises a dual-buck converter and a three-phase inverter operating in grid frequency. Only two high frequency switches are used, which results good output waveform performance. In order to reduce the high frequency switching losses, a novel improved double-frequency Buck type voltage source converter(DBVSC) is also proposed. An additional dual-Buck converter is added to the BVSC, the added dual-Buck converter deals with the fundamental power that operates in low frequency, and BVSC only deals with harmonic power that operates in high frequency. The output waveform is enhanced and the switching losses are reduced in DBVSC, and the power rating is also increased. The DBVSC is very suitable for large power rating application. The one cycle control theory is adopted to control the proposed DBVSC with analog circuit, which is very simple. The proposed DBVSC and control method are verified by simulation.     

A new control design for grid integration ofDFIG wind farm with VSC-HVDC

This paper proposes a control scheme for a doubly-fed induction generator (DFIG) wind farm with VSC-HVDC grid integration to ensure secure and reliable operation of power system with fluctuated wind power penetration. The whole system dynamic models are respectively described. Based on vector control system with a virtual voltage orientation, a steady-state voltage control block and a dynamic voltage control block with a cross-product term of d-q currents are separately designed for WFVSC to control the corresponding parts of the wind farm voltage. Meanwhile, with the consideration of AC and DC side parameter variation and external disturbance, an improved backstepping control scheme with Lyapunov stability provement is also proposed for the GSVSC. The combination of the two schemes makes up the new control design of this study. Besides, to verify the performance of the proposed new control design, three different cases are suggested which contain the AC and DC side parameter variation and external disturbance such as local load cut off-in, grid voltage harmonics. Finally, numerical simulations using MATLAB/Simulink are presented for a 200MW DFIG wind farm with VSC-HVDC grid integration to validate the proposed control scheme and demonstrate the improved system operation performance. Moreover, the corresponding discussions are also presented for further illustrations.     

Parameter design and simulation for animproved direct current side active power filter

Considering the characteristics of the dc side series active power filter (APF) that the output voltage cannot be adjusted and the control circuit is complex , an improved single phase dc series APF topology is proposed. The improvement of the new circuit topology and fundamental working principle are analyzed. Following the circuit power factor pre regulator principle, the designing method for the main circuit parameters is given. The voltage ring and the current ring are designed by using the zero pole method. The main circuit power switch is controlled with the same frequencies, while the control circuit was simplified further. Compared with the paralleled APF, the main circuit of topology structure is simplified and the number of the active switches is reduced, which show low input current harmonics, high power factor, large voltage output adjustment range and low cost. The simulation results prove that the proposed topology is correct and reliable.     

Vector control of permanent magnet synchronous motor with variable DC-link voltage

As for the drive of control system in electric vehicles, if the inverter power is supplied by a constant DC-link voltage, there are some disadvantages in the system, such as small utilization of the voltage, big current harmonic distortion of the motor windings. A new strategy for vector control of permanent magnet synchronous motor (PMSM) with variable DC-link voltage is proposed, which is suitable for electric vehicles. According to the reference voltage amplitude of the inverter, the new system uses bidirectional DC/DC converter to adjust the DC-link voltage to improve the performance of the vector control system. At last, the whole system is simulated with MATLAB software. The simulation results show that the new strategy for vector control can increase voltage utilization, decrease torque ripple, improve current waveform effectively and decrease the total harmonic distortion of motor current. The results also verify the effectiveness and feasibility of the new strategy.     

Compensation of Dead Time Effects Based on the New Switching Strategy

The dead-time inserted into the switching signals of inverters case the dead-time effect of output voltage distortion. The influence of dead-time on output voltage in inverters is analyzed in detail, Then, a new switching strategy, which can provide excellent inverter output voltage distortion correction, is proposed. At last, the experiment results of inverter are presented to demonstrate the practicability and validity of the control strategy.     

Theoretical Analysis and Design of Resonant DC Base High Frequency Inverter

A theoretical analysis of the Resonant DC Base High Frequency Inverter is given. A optimal control scheme for the short circuit current of the resonant inductor is proposed. The system parameters,output current,output voltage and characteristics of the Resonant DC Base in this scheme are analysed. In the theoretical analysis the load is supposed as a resistor to void the calculating error while the load is treated as a constant current source. The analysis and test result have proved that the optimal parameters of the Resonant DC are only determined by the load resistance and the output frequency.     

含旋转电机接口和逆变器接口的微网小信号稳定性分析

提出了一种包含了逆变器接口（voltage source inverter,VSI）、同步电机接口（synchronous generator,SG）的独立微网控制策略,并分析了其小信号稳定性。VSI接口和SG接口的分布式电源均采用下垂控制策略,二者之间无需实时通信,可实现负荷功率共享。建立了系统的小信号状态空间模型,主要包括：同步发电机及其控制器的小信号模型、逆变器及其控制器的小信号模型、电网络及负荷小信号模型。计算了下垂增益变化时的根轨迹,得到了系统主特征值随参数变化的根轨迹,计算了不同状态变量对特征值的参与因子。稳定性分析结果表明：当所有分布式电源采用下垂控制时,引入同步发电机接口的分布式电源,系统频率小信号稳定性大大增强。PSCAD时域仿真验证了特征值计算的正确性。     

The power-supply of X-ray machine adopting PID control and high-frequency inverter technology

To solve the problem of low control accuracy and low stability of current X-ray machines, a kind of digital power supply for X-ray machine is introduced. In the digital power supply, some key technologies are used to improve the output stability of the high frequency inverter, including improved BUCK circuit for voltage regulating circuit, high frequency inverter and soft switching technology for the high-voltage generator. The PWM control technology is used to control the switch transistor of voltage regulating circuit and inverter circuit, which makes the drive waveform output stable and easy to control. In order to improve the control accuracy, reduce the volume and change high voltage consecutively, the software PID of the microcomputer is used to control the feedback circuit. The high-accuracy power chip is used for the filament power supply to make the filament electric current stable. Through the analysis of the circuit, the parameters of the circuit are calculated and the circuit is simulated by PSPICE software. The results show that the theoretical analysis is consistent with the practical simulation results. The design can meet the requirement of the technology indices of the power supply of the X-ray machines.     

Hybrid Power Supply Based on One Cycle Control

A hybrid power supply is composed by both a linear and a switching source connected in parallel and it can improve the dynamic response. But the hybrid power supply cant not effectively reject the perturbations in the power supply. A hybrid power supply based on one cycle control theory is proposed in order to improve the capability and the control precision. A switching source based on one cycle control is adopted in the hybrid power supply. The analysis results indicate that the hybrid power supply can effectively reject the perturbations in the power supply. And the analysis results also show that not only the control precision is improved, but also the control circuit is simple. The simulation resuits given verify the correctness and effectiveness of the proposed method.     

Development of Virtual Sweep Signal Source

A new kind of virtual sweep signal source which can be used to output specific sweep signal according to(users') configuration and can be widely applied to frequency characteristics measurement in the field of mechanics,electrics and electronics,is developed by using Dot Net software engineering technique,C/S architecture and general data acquisition platform.The virtual instruments not only make up the intrinsic defect of traditional instruments based on hardware components in high performance,remote control and data processing,but also indicate the powerful life and nice future of virtual instrument technologies.     

Improvement and simulation on direct torque control system of permanent magnet synchronous motor

To solve the problems of large flux, torque ripple and inconstant inverter switching frequency in conventional direct torque control (DTC), a space vector modulation (SVM) technique is introduced to the conventional PMSM-DTC system and analyzed thoroughly based on the mathematical model. This novel control method which enjoys the advantages of VC and DTC has only one easy adjustable PI regulator and is easy to realize. The simulation verifies that this control system is capable of effectively improving the steady state performance and keeping the excellent dynamic performance of the PMSM-DTC system simultaneously and remain the switching frequency constant.     

An asymmetric fault ride-through control method forPMSG wind turbine based onsuper-capacitors

With the rapid increasing interaction between wind turbines and power systems, wind turbines have to have the fault ride-through (FRT) capability to ensure the safe operation of power grid. In order to improve the asymmetric FRT capability of permanent magnet synchronous generator (PMSG) wind turbine, a novel control FRT method based on super-capacitors is proposed. In this method, super-capacitors are connected to the DC bus of AC-DC-AC converter via a bi-directional DC-DC converter, and the power processed by the super-capacitors is controlled to limit the increasing of the DC bus voltage of the AC-DC-AC converter in grid failure condition, and to reduce the 2nd order voltage ripple in the DC bus. Meanwhile, the proposed control method employs the grid voltage feed-forward approach to reduce the negative sequence current component in the grid side converter. According to the low voltage ride through (LVRT) standard, the selection of the super-capacitor capacity is also discussed, and then a mathematical model of the super-capacitor with the bi-directional DC-DC converter is established for designing the controller. Simulation results for a 1MW PMSG wind turbine by MATLAB show that the proposed control method reduces both the negative sequence current component in grid side converter and the 2nd order voltage ripple in DC link at the same time. The results also demonstrate that the asymmetric FRT capability of PMSG wind turbine is improved, which verifies the effectiveness of the proposed control method in this paper.     

EQUAL ARA ALGORITHM OF PWW WAVEFORM

This paper presents the equal theory of the sine wave voltage and PWM waveform in the integration of time. Using the graphic method as well as the comparison method of sequential integration the PWM control pattern is calculated. Depending on an example for PWM circuit inverter the microcomputer is investi-gated. The method is simple and effective. It is specially adeguate to the engineering control.     

Image Secure Communication Based on Logistic Map

The chaotic sequences generated by logistic map are used as the carrier, and the image secure communication scheme is proposed based on that the sequences possess a good correlation property. Promising results are obtained on Lenna image by computer simulation. The obtained results indicate that the transmitted source image can be correctly recovered and the proposed scheme is reliable when transmitter and receiver using identical initial value even under the situations of a noisy channel. However, the tiny difference of initial value between transmitter and receiver will result in failure to communication. Finally, the quality of recovered source image is assessed, and the approximate formula of bit-error rate in term of code length is also obtained.     

The Electric Control System of Mechanical Transmission Test-bed With Mechanical Closed Cycle And Electric Colsed Cycle

This paper presented the principle and combinations of the mechanical transimssion test-bed with mechanical closed cycle and electric closed cycle. This system is composed of variable velocity driver, motor, generator, inverter and computer. It can be used both in mechanical closed cycle test-bed and electric ciooed cycle test-bed. The test-bed can keep a realting monitoring over the system and control the rotational speed and torque by computer. It can also simulate the real work condition of the test and to do the test. In this paper,the diminishable magnetization velocity modulation,invertiable control,the test data and curve,and the inverting efficiency as well as control scheme and presented.     

Application of digital phase-locked loop and filtering technique in PWM rectifier

VHS-ADC high speed digital signal processing platform based on MATLAB and FPGA could be used to build three-phase voltage source rectifier with space voltage vector PWM(SVPWM).The initial phase of coordinate transformation from three phase static coordinate to two phase static coordinate which is called Park transformation and from two phase rotating reference frame to two phase static coordinate is uncertain. There existed noise in acquiring grid voltage and current. Digital phase-locked loop is added to follow the frequency and phase of grid voltage, FIR filter is added to process signal and reduce the interference. External voltage control loop, internal current control loop and the model of coordinate transformation are designed on the VHS-ADC platform. The small power experiment is conducted to verify the stability and feasibility of the control system. The experimental results show that the digital phase-locked loop and FIR digital filter can be applied to three-phase voltage source rectifier.     

Development of Movement Control System of Shoe Leather Lumen CT Instrument

A method of solving the problem of shoe leather lumen measurement in shoe CAD/CAM by industrial CT technology is introduced,X ray industrial CT technology is studied. The paper gives a rational scheme of system dispose. This scheme can be not only meet the need of shoe leather lumen measurement, but also achieve ordinary measurement. An uncomplicated and practicable movement control system are proposed also. This scheme achieves high precision of movement position without expensive direct current servo-control. A new simple method measurement is developed and accurate control of position in movement of detector data insert is achieved. The image resolving power can meet shoe leather lumen measurement.