Distribution of Trace Elements in Soils from the Sudbury Smelting Area (Ontario,Canada)

The sequential extraction procedure proposed by the European Commission Measurement and Testing Programme, combined with Scanning Electron Microscopy and Energy Dispersive X-ray Analysis(SEM/EDS), was applied to identify and quantify the chemical andmineralogical forms of Cu, Ni, Fe, Mn, Zn, Pb, Cr and Cd presentin the topsoil from a mining and smelting area near Sudbury (Ontario, Canada). The possible mobility of the chemical forms was also assessed. The metal fractions: (1) soluble and exchangeable, (2) occluded in manganese oxides and in easily reducible iron oxides, (3) organically bound and in form of sulphides, (4) residual mainly present in the mineral lattice structures were separated. Cu and Ni were the major metallic contaminants, occurring in soils in broad ranges of concentrations: Cu 11–1890 and Ni 23–2150 mg kg^-1. Cu was uniformly distributed among allthe extracted fractions. Ni was found associated mainly withthe residual forms, accounting for 17–92%, with an averageof 64%, of the total Ni present in the soils. Fe, Mn, Zn,Pb, Cr and Cd, while occurring in most analysed samples innormal soil concentrations, were primarily held in theresidual mineral fraction (on average >50%). The solubleand exchangeable forms made a small contribution (≤8.1%)to the total content of metals extracted. At least 14% ofthe total Cd, Mn and Pb was mobilised from the reducibleforms. The oxidizable fraction assumed mean values higher than10% only for Pb and Zn. Statistical treatment of the experimental data showed significant correlations between totalmetal content of the soils, some soil properties such as pH value, clay and organic matter content, and metal concentrationsin the various fractions. SEM/EDS analysis showed Fe in form ofoxides and sulphides in soils and Cu, Ni, Mn, Zn and Cr in association with iron oxides. Numerous black carbonaceous particles and precipitates of aluminium fluoride salts, observedin the solid residue left after `total’ digestion, were found tocontain Fe, Ni and Cr.     

云南滇池沉积物中重金属的形态分布特征

Fractionation of heavy metals in sediments can help in understanding potential hazards of heavy metals. The present study analyzed total concentrations and fractions of selected heavy metals （Cd, Cr, Cu, Pb, and Zn） in surface sediments from Dianchi Lake, Yunnan Province, China, as well as factors that may affect distributions of the various heavy metal fractions. Total concentrations of the heavy metals decreased in the order Zn 〉 Cu 〉 Pb 〉 Cr 〉 Cd. These heavy metals, except Cr, were much higher than their background levels, indicating that Dianchi Lake was polluted by Cd, Zn, Pb, and Cu. Cadmium occurred mainly as the non-residual fraction （sum of the HOAc-soluble, reducible, and oxidizable fractions） （97.6%）, and Zn （55.7%） was also predominantly found in the non-residual fraction. In contrast, most of the Cr （88.5%）, Pb （81.8%）, and Cu （59.2%） occurred in the residual fraction. Correlation analysis showed that total heavy metal concentrations, organic matter and reducible Fe were the main factors affecting the distributions of the various heavy metal fractions. In the Walhai section of Dianchi Lake （comprising 97% of the lake area）, the concentrations of Cd, Zn, Pb, and Cu in the non-residual fraction were significantly lower （P ≤ 0.01 or 0.05） than those of the Caohal section （3% of the lake area）. This indicated that potential heavy metal hazards in the Caohai section were greater than the Waihai section.     

水稻子实对不同形态重金属的累积差异及其影响因素分析

在分析成都平原核心区土壤重金属(Cd、Cr、Pb、Cu、Zn)全量、各形态含量及相应点位种植的水稻子实重金属含量的基础上,通过统计分析、空间插值及线性回归方程的模拟,研究了土壤Cd、Cr、Pb、Cu、Zn全量的空间分布状况、各形态重金属含量统计特征,以及水稻子实对重金属各形态的累积差异及其影响因素。结果表明,成都平原水稻土重金属污染较轻,除Cd外,均低于国家土壤环境质量二级标准。土壤中重金属的可交换态含量均较低,Cd主要以铁锰氧化态存在,Cr、Cu、Zn、Pb主要以残渣态存在。水稻子实对5种重金属的累积效应顺序为:Cd>Zn>Cu>Pb>Cr。与水稻重金属累积关系密切的重金属活性形态(可交换态、碳酸盐结合态、铁锰氧化物结合态和有机物结合态)主要有:Cd的碳酸盐结合态、Cr的可交换态、Pb的有机物结合态和Cu的碳酸盐结合态含量;Zn各活性形态对水稻子实含量的影响不明显。土壤理化性质对不同活性形态重金属元素的影响效应各不相同。活性态Cd主要受有机质、pH和容重的影响;活性态Cr与pH、有机质、CEC和容重密切相关;活性态Pb与有机质、容重、中细粉粒、砂粒等均有密切的关系;Cu的活性主要受粘粒、有机质含量的影响;Zn的有效性主要受pH、有机质、砂粒、容重的影响。总的看来,对土壤Cd、Cr、Pb、Cu、Zn各活性形态含量影响效应较强的是有机质、pH、容重,而与土壤吸附性能密切相关的颗粒组成、CEC的影响不甚明显。     

Trace metal composition and speciation in street sediment: Sault Ste. Marie,Canada

Street sediment collected in Sault Ste. Marie, Ontario was examined for trace element composition (As, Cd, Cr, Cu, Fe, Pb, Hg, Ni and Zn) and the metal partitioning to various sediment properties was determined by sequential extraction. Total Ni, Cu, Zn and Pb concentrations exceeded the lowest effect levels specified in the Ontario Provincial Sediment Quality Guidelines for Metals (Environment Ontario, 1992) and derived from bioassay studies. According to these Guidelines, the disposal of such sediment has to be guided by environmental considerations. A significant fraction of these metals was extractable in 0.5 N HCl over a 12-hour period and considered as potentially bioavailable. The major accumulative phases of toxic metals in this sediment are exchangeable, carbonate, Fe/Mn oxides and organic matter but the relative importance of each phase varied for individual metals. Approximately 20% of the total extractable Cd is found in each of these four fractions. Pb, Zn and Mn are predominantly bound to carbonates, Fe/Mn oxides and organic matter. Cu shows a high affinity for organic matter and to a lesser extent for carbonates. Elevated levels of Cd, Pb, Cu, Zn, Mn and Cr in the exchangeable and/or soluble phase suggest that sediment associated metals, mobilised from streets in Sault Ste. Marie during runoff and snowmelt, would adversely impact water quality in the receiving waters. However, large fractions of the total metal load are associated with coarser particles which are unlikely to be transported through the drainage system into receiving waters.     

Changes of Al and Heavy Metal Concentrations in Slovak Soils During the Last 25 Years

The objective of this study was to investigate changes of total concentrations and various extract-defined Al and heavy metal fractions in Slovak agricultural soils during the last 25 years. We compared 7 stored soil samples collected between 1966 and 1970 with samples collected in 1994 at the same sites. Seven fractions of Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn were determined with a sequential extraction procedure in all samples. Total concentrations of Cd, Zn, Mn, Ni, and Cu were lower in the 1994 samples; those of Al, Fe, Pb, and Cr were higher. Based on the initial concentrations, the average total concentration changes were: Cd(-10,3%)<Zn(-7,2%)<Mn(-4,8%)<Ni(-2,3%)<Cu(-1,4%)<Al(+2,1%)<Fe(+2,9%)<Cr(+7,4%)<Pb(+8,3%). This row is consistent with the decrease in metal mobility. The differences in salt-extractable metals showed the same pattern; however, changes were more pronounced than for total concentrations. The results suggest that decreases during the last 25 years are caused by higher leaching than deposition rates and increases vice versa. The highest increase in Cr and Pb concentrations is observed in the EDTA-extractable fraction, which mainly characterizes organically bound metals.     

Heavy‐Metal Contamination of Soil and Vegetables in Wastewater‐Irrigated Agricultural Soil in a Suburban Area of Hanoi,Vietnam

The To Lich and Kim Nguu Rivers, laden with untreated waste from industrial sources, serve as sources of water for irrigating vegetable farms. The purposes of this study were to identify the impact of wastewater irrigation on the level of heavy metals in the soils and vegetables and to predict their potential mobility and bioavailability. Soil samples were collected from different distances from the canal. The average concentrations of the heavy metals in the soil were in the order zinc (Zn; 204 mg kg^?1) > copper (Cu; 196 mg kg^?1) > chromium (Cr; 175 mg kg^?1) > lead (Pb; 131 mg kg^?1) > nickel (Ni; 60 mg kg^?1) > cadmium (Cd; 4 mg kg^?1). The concentrations of all heavy metals in the study site were much greater than the background level in that area and exceeded the permissible levels of the Vietnamese standards for Cd, Cu, and Pb. The concentrations of Zn, Ni, and Pb in the surface soil decreased with distance from the canal. The results of selective sequential extraction indicated that dominant fractions were oxide, organic, and residual for Ni, Pb, and Zn; organic and oxide for Cr; oxide for Cd; and organic for Cu. Leaching tests for water and acid indicated that the ratio of leached metal concentration to total metal concentration in the soil decreased in the order of Cd > Ni > Cr > Pb > Cu > Zn and in the order of Cd > Ni > Cr > Zn > Cu > Pb for the ethylenediaminetetraaceitc acid (EDTA) treatment. The EDTA treatment gave greater leachability than other treatments for most metal types. By leaching with water and acid, all heavy metals were fully released from the exchangeable fraction, and some heavy metals were fully released from carbonate and oxide fractions. The concentrations of Cd, Cr, Cu, Ni, Pb, and Zn in the vegetables exceeded the Vietnamese standards. The transfer coefficients for the metals were in the order of Zn > Ni > Cu > Cd = Cr > Pb.     

Spatial distribution of soil heavy metal concentrations as indicator of pollution sources at Mount Križna (Great Fatra,central Slovakia)

The objective of this study was to test the suitability of a simple approach to identify the direction from where airborne heavy metals reach the study area as indication of their sources. We examined the distribution of heavy metals in soil profiles and along differently exposed transects. Samples were taken from 10 soils derived from the same parent material along N-, S-, and SE-exposed transects at 0—10, 10—20, and 20—40 cm depth and analyzed for total Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn concentrations. The heavy metal concentrations at 0—10 cm were larger than background concentrations in German arable soils except for Cr (Cd: 0.6—1.8 mg kg^—1; Cr: 39—67; Cu: 40—77; Ni: 87—156; Pb: 48—94; Zn: 71—129; Fe: 26—34 g kg^—1; Mn: 1.1—2.4). Decreasing Cd, Cu, Mn, and Pb concentrations with increasing soil depth pointed at atmospheric inputs. Aluminum and Ni concentrations increased with soil depth. Those of Fe, Cr, and Zn did not change with depth indicating that inputs at most equalled leaching losses. The Pb accumulation in the surface layer (i.e. the ratio between the Pb concentrations at 0—10 to those at 20—40 cm depth) was most pronounced at N-exposed sites; Pb obviously reached Mount Križna mainly by long-range transport from N where several industrial agglomerations are located. Substantial Cd, Cu, and Mn accumulations at the S- and SE-exposed sites indicated local sources such as mining near to the study area which probably are also the reason for slight Cr and Zn accumulations in the SE-exposed soils. Based on a principal component analysis of the total concentrations in the topsoils four metal groups may be distinguished: 1. Cr, Ni, Zn; 2. Mn, Cd; 3. Pb (positive loading), Cu (negative loading); 4. Al, Fe, indicating common sources and distribution patterns. The results demonstrate that the spatial distribution of soil heavy metal concentrations can be used as indication of the location of pollution sources.     

Concentrations and forms of heavy metals in Slovak soils

The risk assessment of heavy‐metal contamination in soils requires knowledge of the controls of metal concentrations and speciation. We tested the relationship between soil properties (pH, CEC, C_org, oxide concentrations, texture) and land use (forest, grassland, arable) and the partitioning of Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn among the seven fractions of a sequential extraction procedure in 146 A horizons from Slovakia. Using a cluster analysis, we identified 92 soils as representing background metal concentrations while the remaining 54 soils showed anthropogenic contamination. Among the background soils, forest soils had the lowest heavy‐metal concentrations except for Pb (highest), because of the shielding effect of the organic layer. Arable soils had the highest Cr, Cu, and Ni concentrations suggesting metal input with agrochemicals. Grassland soils had the highest Cd and Zn concentrations probably for geogenic reasons. Besides the parent material (highest metal concentrations in soils from carbonatic rock, lowest in quartz‐rich soils with sandy texture), pedogenic eluviation processes controlled metal concentrations with podzols showing depletion of most metals in E horizons. Partitioning among the seven fractions of the sequential extraction procedure was element‐specific. The pH was the overwhelming control of the contributions of the bioavailable fractions (fractions 1–4) of all metals and even influenced the contributions of Fe oxide‐associated metals (fractions 5 and 6) to total metal concentrations. For fractions 5 and 6, Fe concentrations in oxides were the most important control of contributions to total metal concentrations. After statistically separating the pH from land use, we found that the contributions of Cu in fractions 1–4 and of NH₄NO₃‐extractable Al, Cd, Pb, and Zn to total metal concentrations were significantly higher under forest than under grassland and in some cases arable use. Our results confirm that metal speciation in soils is mainly controlled by the pH. Furthermore, land use has a significant effect.     

Heavy metal contamination of soils in Northern Slovakia

Environmental damages like forest decline in Northern Slovakia could be a result of long-distance transport of pollutants with the dominating north-west winds. On 10 sites, primarily in the northbound upper slopes of west-east oriented mountain ranges in Northern Slovakia, the extent of the heavy metal contamination in soils along a north-south transect was examined. Oi, Oe, Oa, A, and B horizons were sampled and the total concentrations of Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn were determined. The ranges of heavy metal concentrations in the forest floor were higher than reported for comparable samples from Bavarian soils except for Zn (Cd: 0.65–1.77; Cr: 12–40; Cu: 19–41; Ni: 8–24; Pb: 70–187; Zn: 31–92 mg kg^?1), in the mineral soil the concentrations were lower. The depth distribution of the metal concentrations indicated a contamination with Cd, Cr, Cu, Ni, Pb, and Zn. The concentration differences between forest floor and mineral soil tended to be higher at the northern than at the southern sites for Cu, Ni, Pb, and Zn, indicating a long-distance transport from the north. Correlation and principal component analyses of the total metal concentrations revealed three groups: Cu, Pb, and Zn inputs mainly seemed to result from long-distance transport from the north, Cr and Ni inputs additionally from local sources. Cd probably had its origin mainly in local sources. This result was further confirmed by the grouping of the sites when clustered.     

泉州走马埭典型土壤重金属的赋存形态分析

采用改进的Tessier连续萃取方法研究了泉州走马埭国家农田示范保护区典型土壤中重金属(Cr、Ni、Cu、Zn、Cd、Pb)的化学形态分布,通过土壤重金属的赋存形态分析比较了6种重金属的生物可利用性。研究结果表明,土壤中不同重金属元素化学形态分布具有不同的特点:Cr和Ni主要以残渣态存在,其余形态所占的比例很小;Cu以残渣态含量最高,碳酸盐结合态含量最低;Zn以残渣态为主,可交换态含量最低;Cd以可交换态和碳酸盐结合态为主,水溶态含量最低;Pb以残渣态和铁锰氧化物结合态为主,水溶态含量最低。土壤中除Cd外,Zn、Cu、Cr、Pb、Ni在正常自然条件下相对比较稳定。     

Modelling trace metal extractability and solubility in French forest soils by using soil properties

Soil/solution partitioning of trace metals (TM: Cd, Co, Cr, Cu, Ni, Sb, Pb and Zn) has been investigated in six French forest sites that have been subjected to TM atmospheric inputs. Soil profiles have been sampled and analysed for major soil properties, and CaCl₂‐extractable and total metal content. Metal concentrations (expressed on a molar basis) in soil (total), in CaCl₂ extracts and soil solution collected monthly from fresh soil by centrifugation, were in the order: Cr > Zn > Ni > Cu > Pb > Co > Sb > Cd , Zn > Cu > Pb = Ni > Co > Cd > Cr and Zn > Ni > Cu > Pb > Co > Cr > Cd > Sb , respectively. Metal extractability and solubility were predicted by using soil properties. Soil pH was the most significant property in predicting metal partitioning, but TM behaviour differed between acid and non‐acid soils. TM extractability was predicted significantly by soil pH for pH < 6, and by soil pH and Fe content for all soil conditions. Total metal concentration in soil solution was predicted well by soil pH and organic carbon content for Cd, Co, Cr, Ni and Zn, by Fe content for Cu, Cr, Ni, Pb and Sb and total soil metal content for Cu, Cr, Ni, Pb and Sb, with a better prediction for acidic conditions (pH < 6). At more alkaline pH conditions, solute concentrations of Cu, Cr, Sb and Pb were larger than predicted by the pH relationship, as a consequence of association with Fe colloids and complexing with dissolved organic carbon. Metal speciation in soil solutions determined by WHAM‐VI indicated that free metal ion (FMI) concentration was significantly related to soil pH for all pH conditions. The FMI concentrations of Cu and Zn were well predicted by pH alone, Pb by pH and Fe content and Cd, Co and Ni by soil pH and organic carbon content. Differences between soluble total metal and FMI concentrations were particularly large for pH < 6. This should be taken into account for risk and critical load assessment in the case of terrestrial ecosystems.     

Metal composition of soil,sediments, and urban dust and dirt samples from the Menomonee River Watershed,Wisconsin, U.S.A.

The Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn contents of the sand, silt, and clay fractions were determined for soils, urban street dust and bottom- and suspended-sediments sampled in the Menomonee River watershed, Wisconsin. The samples were dispersed by ultrasound prior to fractionation. The ultrasound dispersion avoids chemical contamination or alteration resulting from use of chemical dispersants and insures the dispersion of aggregates present in mechanically-sieved samples. Chemical analyses of fractionated samples were more precise than analyses of unfractionated samples in identifying areas in the watershed receiving pollutant inputs. Higher levels of Cr, Cu, Fe, and Ni were found in the coarser particles than in the finer particles of urban street dust samples. The Cd, Pb and Zn contents of some bottom and suspended sediments were greater than in the soils of the watershed. Contents of these metals were correlated significantly with each other in the clay-sized fraction of sediments but not in soils. The metal contents of sediments were largely controlled by vehicular emission.     

Heavy metal distribution in different soil aggregate size classes from restored brackish marsh,oil exploitation zone,and tidal mud flat of the Yellow River Delta

Purpose

Heavy metal distribution in soils is affected by soil aggregate fractionation. This study aimed to demons trate the aggregate-associated heavy metal concentrations and fractionations in “sandy,” “normal,” and “mud” soils from the restored brackish tidal marsh, oil exploitation zone, and tidal mudflat of the Yellow River Delta (YRD), China.

Materials and methods

Soil samples were sieved into the aggregates of >2, 0.25–2, 0.053–0.25, and <0.053 mm to determine the concentrations of exchangeable (F1), carbonate-bound (F2), reducible (F3), organic-bound (F4), and residual fraction (F5) of Cd, Cr, Cu, Ni, Pb, and Zn.

Results and discussion

The 0.25–2 mm aggregates presented the highest concentrations but the lowest mass loadings (4.23–12.18 %) for most metal fractions due to low percentages of 0.25–2 mm aggregates (1.85–3.12 %) in soils. Aggregates <0.053 mm took majority mass loadings of metals in sandy and normal soils (62.04–86.95 %). Most soil aggregates had residual Cr, Cu, Ni, Zn, and reducible Cd, Pb dominated in the total Cd, Cr, Cu, Ni, Pb, and Zn concentrations. Sandy soil contained relatively high F4, especially of Cu (F4) in 0.25–2 mm aggregates (10.22 mg kg^?1), which may relate to significantly high organic carbon contents (23.92 g kg^?1, P?<?0.05). Normal soil had the highest total concentrations of metals, especially of Cu, Ni, and Pb, which was attributed to the high F3 and F5 in the <0.053 mm aggregates. Although mud soil showed low total concentrations of heavy metals, the relatively high concentrations of bioavailable Cd and Cu resulted from the relatively high Cd (F2) and Cu (F2) in the >2 mm aggregates indicated contribution of carbonates to soil aggregation and metal adsorption in tidal mud flat.

Conclusions

Soil type and aggregate distribution were important factors controlling heavy metal concentration and fractionation in YRD wetland soil. Compared with mud soil, normal soil contained increased concentrations of F5 and F3 of metals in the 0.053–0.25 mm aggregate, and sandy soil contained increased concentrations of bioavailable and total Cr, Ni, and Zn with great contribution of mass loadings in the <0.053 mm aggregate. The results of this study suggested that oil exploitation and wetland restoration activities may influence the retention characteristics of heavy metals in tidal soils through variation of soil type and aggregate fractions.

     

Long-term cultivation impact on the heavy metal behavior in a reclaimed wetland,Northeast China

Purpose

Heavy metal fractionation varies according to land uses. To understand the behavior of heavy metals in wetland soils under long-term agricultural cultivation, we examined the distribution, source, and associated environmental risk of heavy metals in different types of wetland soils.

Materials and methods

Soils were collected in cultivated lands, artificial ditches, and riparian zones from a reclaimed wetland in the Sanjiang Plain, Northeast China. They were analyzed for total concentrations and chemical fractions of Pb, Cd, Cu, Zn, Cr, and Ni, as well as pH, soil organic matter, total phosphorus, and particle size distribution.

Results and discussion

Heavy metal concentrations were significantly lower in cultivated wetland than in ditch and riparian wetlands. Riparian wetland was found to exhibit the highest metal concentrations. When compared with other two wetland types, the cultivated wetland showed much higher partitioning levels of heavy metals in the acid-soluble fraction and lower partitioning levels in the oxidizable fraction. Although Cr, Cu, and Ni in ditch and riparian wetlands were identified as the metal pollutants of primary concern, they had a low or no risk of further dispersion to other environmental components. Weathering of parent materials was the main source of Cr and Cu, Pb, Cd, and Zn originated mainly from agricultural practices, and Ni emanated from a mixture of sources.

Conclusions

Long-term agricultural cultivation can lead to significant heavy metal loss in cultivated wetland but enrich heavy metal concentrations in ditch and riparian wetlands. Periodic ditch dredging is considered an effective measure for decreasing heavy metal input into the fluvial system and thereby reducing the dispersion to the regional water environment.     

新乡市寺庄顶污灌区土壤中重金属的形态分布及生物有效性研究

对长期电池废水灌溉的新乡市寺庄顶污灌区和对照区土壤重金属进行取样分析,结果表明,对照区土壤中Cd,Ni,Zn,Cu和Cr含量都能达标,污灌区土壤中Cr含量能达标,Cd,Ni,Zn和Cu的含量超标,其平均含量分别为65.31,1 196.64,2 799.25,145.78 mg/kg,是国家土壤环境质量二级标准的108.85,19.94,9.33和1.46倍。形态分析结果表明,污灌区污染最严重的Cd主要以铁-锰氧化物结合态存在,所占比例平均为56.84%;Ni主要以铁-锰氧化物结合态和残余态存在,所占比例平均为37.44%和39.55%;Zn主要以残余态存在,所占比例平均为78.24%;Cu主要以有机结合态存在,所占比例平均为57.70%;Cr主要以有机结合态和残余态存在,所占比例平均为45.55%和34.18%。与对照相比,污灌降低了Cd,Ni,Zn,Cu和Cr残余态所占比例,提高了重金属迁移能力和生物有效性。在4种超标重金属中Cd可交换态所占比例最高,平均为24.54%,由于其生物有效性最高,Cd迁移能力和植物毒性最值得关注。     

Transport and distribution of heavy metals in Cauvery river

Heavy metal transport in Cauvery river chiefly takes place in the particulate form. Tributaries Hemevathi and Kabini draining highly mineralized areas contribute significantly to the heavy metal load of the Cauvery river. Particulate metal transport is influenced by the presence of major dams built across the river. Factor analysis of the elemental data identifies two major group of heavy metals, (a) Fe, Mn, Cr, V and Ti and (b) Cu, Pb and Zn in the suspended sediments of Cauvery river. Heavy metals in surface sediments show wide variations in their concentrations due to the non-uniform grain size distribution of the sediments. The elements Fe, Mn, Pb, Cu, Zn, Ni, Co and As are dominantly present in the <20 μm fraction of the river sediments. Speciation studies show that Fe-Mn oxide phase held the largest share of heavy metals in the sediments. The depth variation of heavy metals in the core sediments suggest their similar mobility during diagenesis. Geoaccumulation indices calculated suggest that Cd, Zn, Cr, Pb, Cu and Ni are enriched in sediments several times over background values.     

皖南茶园土壤重金属化学形态及其生物有效性

以皖南茶园为研究对象,通过Tessier连续提取分级法对茶园土壤重金属(Zn,Cu,Pb,Ni)全量及其化学形态进行了分析,利用活性态重金属占全量之比来评价其生物有效性。结果表明,皖南茶园土壤中Zn,Cu,Pb,Ni含量均未超过国家标准;除Zn外,其他元素均高出背景值,存在较明显的富集现象;土壤中4种重金属在5种形态上表现出不同的分布规律,Zn,Cu,Ni以残渣态为主,分别占总量的72.55%,90.00%和81.79%,而Pb以铁锰氧化物结合态为主,占总量的70.09%;Zn,Cu,Pb,Ni的活性态部分占全量比例分别为5.04%,1.51%,0.97%和0.23%,土壤重金属活性态部分与茶叶中重金属含量之间呈现正相关关系,且皖南茶区的茶叶重金属含量在限量值的安全范围内。     

Heavy Metals in Freshly Deposited Stream Sediments of Rivers Associated with Urbanisation of the Ganga Plain,India

Freshly deposited stream sediments from six urban centres of the Ganga Plain were collected and analysed for heavy metals to obtain a general scenery of sediment quality. The concentrations of heavy metals varied within a wide range for Cr (115–817), Mn (440–1 750), Fe (28 700–61 100), Co (11.7–29.0), Ni (35–538), Cu (33–1 204), Zn (90–1 974), Pb (14–856) and Cd (0.14–114.8) in mg kg^-1. Metal enrichment factors for the stream sediments were <1.5 for Mn, Fe and Co; 1.5–4.1 for Cr, Ni, Cu, Zn and Pb; and 34 for Cd. The anthropogenic source in metals concentrations contributes to 59% Cr, 49% Cu, 52% Zn, 51% Pb and 77% Cd. High positive correlation between concentrations of Cr/Ni, Cr/Cu, Cr/Zn, Ni/Zn, Ni/Cu, Cu/Zn, Cu/Cd, Cu/Pb, Fe/Co, Mn/Co, Zn/Cd, Zn/Pb and Cd/Pb indicate either their common urban origin or their common sink in the stream sediments. The binding capacity of selected metals to sediment carbon and sulphur decreases in order of Zn > Cu > Cr > Ni and Cu > Zn > Cr > Ni, respectively. Stream sediments from Lucknow, Kanpur, Delhi and Agra urban centres have been classified by the proposed Sediment Pollution Index as highly polluted to dangerous sediments. Heavy metal analysis in the <20-μm-fraction of stream sediments appears to be an adequate method for the environmental assessment of urbanisation activities on alluvial rivers. The present study reveals that urban centres act as sources of Cr, Ni, Cu, Zn, Pb and Cd and cause metallic sediment pollution in rivers of the Ganga Plain.     

新乡市环宇大道工业区周边土壤重金属的污染特征和评价

通过实地采样及室内化学分析的方法,研究了新乡市环宇大道工业区周边土壤Pb、Cd、Ni、Zn、Cu和Cr 6种重金属污染特征和风险评价,并应用Tessier五步连续萃取的方法对土壤中超标的Cd,Ni和Zn进行形态分析。结果表明:(1)土壤中Pb、Cd、Ni、Zn、Cu和Cr的平均含量分别是63.08 mg kg-1、176.85 mg kg-1、307.2 mg kg-1、485.6 mg kg-1,38.7 mg kg-1和47.9 mg kg-1,Pb、Cu、Cr平均含量达标,Cd、Ni、Zn平均含量均超标,分别是国家土壤环境质量二级标准的176.85、5.12、1.62倍。(2)Ni和Zn主要以铁锰氧化物结合态和残渣态存在,Cd主要以铁锰氧化物结合态存在,其次为碳酸盐结合态,3种重金属的迁移能力依次为:Cd>Zn>Ni。(3)每种重金属都存在不同程度的潜在生态风险,Cd的潜在生态风险最大并构成了很强的危害。     

新乡市寺庄顶污灌区土壤及小麦重金属污染特征的研究

通过田间采样及室内样品分析,对新乡市寺庄顶污灌区土壤和小麦子实中重金属污染特征进行了初步探讨。结果表明,土壤中cr含量达标,Cd、Ni、Zn和Cu的含量超标,其平均含量分别为65．31、1196．64、2799．25和145．78mg·kg-1,是国家土壤环境二级标准的108．85、19．94、9．33和1．46倍;污染最严重的Cd主要以铁-锰氧化物结合态存在,所占比例平均为56．84％,Ni主要以铁-锰氧化物结合态和残渣态存在,所占比例平均为37．44％和39．55％,Zn主要以残渣态存在,所占比例平均为78．24％,Cu主要以有机结合态存在,所占比例平均为57．70％。小麦子实中cd污染最严重,其平均含量为2．55mg·kg-1,是国家食品卫生标准的25．5倍,这主要是由于土壤中Cd总量严重超标且迁移能力最强的可交换态所占比例较高引起的,Ni、Cr和Zn含量分别是国家食品卫生标准的12．98、6．12和1．32倍,表明长期污水灌溉对寺庄顶灌区小麦的食品安全造成严重威胁,应引起足够的重视。