C_(60)-D-氨基葡萄糖衍生物的制备及其抗氧化性的研究

在非均相碱性体系中,合成了C60-D-氨基葡萄糖衍生物,用FT-IR和1HNMR对产物的结构进行了表征。考察了C60-D-氨基葡萄糖衍生物的超氧阴离子清除能力、羟基自由基清除能力、还原能力以及金属螯合能力。结果表明:C60-氨基葡萄糖衍生物对超氧阴离子自由基O2-.和羟基自由基.OH的半抑制浓度分别是0.42mg/mL和0.26mg/mL;在还原能力体系中当吸光度达到0.5时,所需C60-D-氨基葡萄糖衍生物的浓度是2.44mg/mL;在金属螯合能力体系中,C60-D-氨基葡萄糖衍生物对亚铁离子的半螯合浓度是0.013mg/mL;即表明C60-D-氨基葡萄糖衍生物在4个抗氧化体系中都表现出明显的抗氧化性。并且D-氨基葡萄糖盐酸盐在4个体系中表现出的抗氧化能力都不强,说明C60-D-氨基葡萄糖衍生物的抗氧化能力可能主要来自于C60上保留下来的双键。     

C60H2: Synthesis of the Simplest C60 Hydrocarbon Derivative

The reaction of C(60) with BH(3): tetrahydrofuran in toluene followed by hydrolysis yielded C(60)H(2). This product was separated by high-performance liquid chromatography and characterized as the addition product of H(2) to a 6,6-ring fusion (1alb isomer). The (1)H nuclear magnetic resonance (NMR) spectrum of the product remained a sharp singlet between -80 degrees and +100 degrees C, which suggests a static structure on the NMR time scale. Hydrolysis of the proposed borane addition product with acetic acid-d(1) or D(2)O yielded C(60)HD, and its (3)J(HD) coupling constant is consistent with vicinal addition. The observation of a single C(60)H(2) isomer is in complete agreement with earlier calculations that indicated that at most 2 of the 23 possible isomers of C(60) would be observable at equilibrium at room temperature. These results suggest that organoborane chemistry may be applied to further functionalization of fullerenes.     

C_(60)-D-氨基葡萄糖衍生物的制备及其抗氧化性的研究

在非均相碱性体系中,合成了C60-D-氨基葡萄糖衍生物,用FT-IR和1HNMR对产物的结构进行了表征。考察了C60-D-氨基葡萄糖衍生物的超氧阴离子清除能力、羟基自由基清除能力、还原能力以及金属螯合能力。结果表明:C60-氨基葡萄糖衍生物对超氧阴离子自由基O2-.和羟基自由基.OH的半抑制浓度分别是0.42mg/mL和0.26mg/mL;在还原能力体系中当吸光度达到0.5时,所需C60-D-氨基葡萄糖衍生物的浓度是2.44mg/mL;在金属螯合能力体系中,C60-D-氨基葡萄糖衍生物对亚铁离子的半螯合浓度是0.013mg/mL;即表明C60-D-氨基葡萄糖衍生物在4个抗氧化体系中都表现出明显的抗氧化性。并且D-氨基葡萄糖盐酸盐在4个体系中表现出的抗氧化能力都不强,说明C60-D-氨基葡萄糖衍生物的抗氧化能力可能主要来自于C60上保留下来的双键。     

Closely Approaching the Silylium Ion (R3Si+)

The crystal structure of the tri-isopropyl silyl species, i-Pr(3)Si(Br(6)-CB(11)H(6)), where the brominated carborane Br(6)-CB(11) H(6)(-) is perhaps the least nucleophilic anion presently known, has revealed the highest degree of silylium cation character (R(3)Si(+)) yet observed. The average C-Si-C angle is 117 degrees , only 3 degrees short of the planarity expected of a pure silylium ion(120 degrees ). This value compares to 114 degrees recently reported for a toluene-solvated silyl cation, [Et(3)Si(toluene)](+) by Lambert and co-workers. The greater silylium ion character of i-Pr(3)Si(Br(6)-CB(11)H(6)) versus [i-Pr(3)Si(toluene)](+) is also reflected in the larger downfield shift of the silicon-29 nuclear magnetic resonance, 109.8 versus 相似文献   

Structural aspects of reversible molecular oxygen uptake

The system IrX(CO)[P(C(6)H(5))(3)](2) in benzene solution adds mo lecular oxygen reversibly if X is chlorine and irreversibly if X is iodine. The crystal structure of the complex IrIO(2)(CO)[P(C(6)H(5))(3)](2) * CH(2)Cl(2) is reported here and compared with a previous study of the structure of IrClO(2)(CO)[P(C(6)H(5))(3)](2). The O-O bond length is 1.47 +/- 0.02 angstroms in the irreversibly oxygenated iodo-compound and 1.30 +/- 0.03 angstroms in the reversibly oxygenated chloro compound.     

Radical reactions of c60

Photochemically generated benzyl radicals react with C(60) producing radical and nonradical adducts Rn C(60) (R = C(6)H(5)CH(2)) with n = 1 to at least 15. The radical adducts with n = 3 and 5 are stable above 50 degrees C and have been identified by electron spin resonance (ESR) spectroscopy as the allylic R(3)C(60)(.) (3) and cyclopentadienyl R(5)C(60)(.) (5) radicals. The unpaired electrons are highly localized on the C(60) surface. The extraordinary stability of these radicals can be attributed to the steric protection of the surface radical sites by the surrounding benzyl substituents. Photochemically generated methyl radicals also add readily to C(60). Mass spectrometric analyses show the formation of (CH(3))nC(60) with n = 1 to at least 34.     

C60的惰性气体原子化合物分子力学研究

利用分子间相互作用势模型对惰性气体原子在Ｃ６０分子内所形成的化合物进行了研究，讨论了惰性气体原子Ｘ的平衡位置及体系的稳定性，Ｈｅ，Ｎｅ和Ａｒ原子的平衡位置在Ｃ６０笼的中心，而Ｋｒ和Ｘｅ原子则在Ｃ６０笼外比在其内部时体系更稳定，通过考察其附加原子半径大小，可以对附加原子与Ｃ６０笼能否形成稳定的化合物提供预见性。     

Electrical resistivity and stoichiometry of kkhgr c60 films

Electrical resistances of polycrystalline fullerene (C(60)) films were monitored while the films were being doped in ultrahigh vacuum with potassium from a molecular-beam effusion source. Temperature- and concentration-dependent resistivities of K(chi) C(60) films in equilibrium near room temperature were measured. The resistance changes smoothly from metallic at chi approximately 3 to activated as chi --> = 0 or chi --> 6. The minimum resistivity for K(3)C(60) films is 2.2 microohm-centimeters, near the Mott limit. The resistivities are interpreted in terms of a granular microstructure where K(3)C(60) regions form nonpercolating grains, except perhaps at chi approximately 3. Stoichiometries at the resistivity extrema were determined by ex situ Rutherford backscattering spectrometry to be chi = 3 +/- 0.05 at the resistance minimum and chi = 6 +/- 0.05 at the fully doped resistance maximum.     

Electrical Resistivity and Stoichiometry of CaxC60 and SrxC60 Films

The temperature- and concentration-dependent resistivities of annealed CaxC(60) and SrxC(60) films were measured near room temperature. Resistivity minima were observed at x = 2 and 5. The resistivities of these films were rho(min) approximately 1 ohm-centimeter for x = 2 and rho(min) approximately 10(-2) ohm-centimeter for x = 5. This latter value is comparable to the resistivities found in similar experiments on K(3)C(60) films. There is a maximum in the resistivity between x = 2 and 3, and another at x approximately 7. The conductivity is activated over the whole range of compositions, and the activation energy scales with the logarithm of the resistivity. The results suggest that the conductivity and superconductivity observed in Ca(5)C(60) are associated with the population of bands derived from the t(1g) level of C(6O).     

Acetylation by Tip60 is required for selective histone variant exchange at DNA lesions

Phosphorylation of the human histone variant H2A.X and H2Av, its homolog in Drosophila melanogaster, occurs rapidly at sites of DNA double-strand breaks. Little is known about the function of this phosphorylation or its removal during DNA repair. Here, we demonstrate that the Drosophila Tip60 (dTip60) chromatin-remodeling complex acetylates nucleosomal phospho-H2Av and exchanges it with an unmodified H2Av. Both the histone acetyltransferase dTip60 as well as the adenosine triphosphatase Domino/p400 catalyze the exchange of phospho-H2Av. Thus, these data reveal a previously unknown mechanism for selective histone exchange that uses the concerted action of two distinct chromatin-remodeling enzymes within the same multiprotein complex.     

Chemistry. Superacids--it's al lot about anions

Superacids are powerful agents for protonating weak bases, with applications ranging from synthetic chemistry to batteries and fuel cells. DesMarteau explains in his Perspective that many superacids have undesirable properties, because after proton donation, the resulting anion may interact strongly with the protonated base or the solvent. Reed et al. report the discovery of a superacid that overcomes this problem. In the anion, charge is distributed efficiently over many atoms, reducing unwanted interactions.     

Planar hexacoordinate carbon: a viable possibility

The viability of molecules with planar hexacoordinate carbon atoms is demonstrated by density-functional theory (DFT) calculations for CB6(2-), a CB6H2 isomer, and three C3B4 minima. All of these species have six pi electrons and are aromatic. Although other C3B4 isomers are lower in energy, the activation barriers for the rearrangements of the three planar carbon C3B4 minima into more stable isomers are appreciable, and experimental observation should be possible. High-level ab initio calculations confirm the DFT results. The planar hexacoordination in these species does not violate the octet rule because six partial bonds to the central carbons are involved.     

Charge Donation by Calcium into the t1g Band of C60

Photoemission spectra of compounds prepared by the reaction of C(60) films with calcium show two distinct metallic phases, whereas alkali-doped C(60) films have only one. In the first phase the bulk t(1u) band, derived from the lowest unoccupied molecular orbital of C(60), is partially occupied. This is followed by an insulating phase that has the composition Ca(3)C(60) in which the t(1u) band is filled and has properties analogous to those of K(6)C(60). Continued exposure to calcium produces a second metallic phase in which electrons are donated into the t(1g) band. The superconductivity of Ca(5)C(60) is associated with the t(1g) band.     

Fabrication and properties of free-standing c60 membranes

Van der Waals forces that bind C(60) molecular solids are found to be sufficiently strong to allow the reproducible fabrication of free-standing C(60) membranes on (100) silicon wafers. Membranes, 2000 to 6000 angstroms thick, were fabricated by a modified silicon micro-machining process and were found to be smooth, flat, and mechanically robust. An important aspect of the silicon-compatible fabrication procedure is the demonstration that C(60) films can be uniformly and nondestructively thinned in a CF(4) plasma. Young's modulus and fracture strength measurements were made on membranes with areas larger than 6 millimeters by 6 millimeters. It may be possible to use C(60), membranes for physical property measurements and applications.     

Synthesis and Single-Crystal X-ray Structure of a Highly Symmetrical C60 Derivative, C60Br24

C(60) and liquid bromine react to form C(60)Br(24), a crystalline compound isolated as a bromine solvate, C(60)Br(24)(Br(2))(x), The x-ray crystal structure defines a new pattern of addition to the carbon skeleton that imparts a rare high symmetry. The parent C(60) framework is recognizable in C(60)Br(24), but sp(3) carbons at sites of bromination distort the surface, affecting conformations of all of the hexagonal and pentagonal rings. Twenty-four bromine atoms envelop the carbon core, shielding the 18 remaining double bonds from addition. At 150 degrees to 200 degrees C there is effectively quantitative reversion of C(60)Br(24) to C(60) and Br(2).     

Crystal Structure, Bonding, and Phase Transition of the Superconducting Na2CsC60 Fulleride

The crystal structure of superconducting Na(2)CsC(60) was studied by high-resolution powder neutron diffraction between 1.6 and 425 K. Contrary to the literature, the structure at low temperatures is primitive cubic [See equation in the PDF file], isostructural with pristine C(60). Anticlockwise rotation of the C(60) units by 98 degrees about [111] allows simultaneous optimization of C(60)-C(60) and alkali-fulleride interactions. Optimal Na(+)-C(60)(3-) coordination is achieved with each sodium ion located above one hexagon face and three hexagon-hexagon fusions of neighboring fulleride ions (coordination number 12). Reduction of the C(60) molecule lengthens the hexagon-hexagon fusions and shortens the pentagon-hexagon fusions (to approximately 1.43 angstroms). On heating, Na(2)CsC(60) undergoes a phase transition to a face-centered-cubic [See equation in the PDF file] phase, best modeled as containing quasi-spherical C(60)(3-) ions. The modified structure and intermolecular potential provide an additional dimension to the behavior of superconducting fullerides and should sensitively affect their electronic and conducting properties.     

13C NMR Spectroscopy of KxC60: Phase Separation, Molecular Dynamics, and Metallic Properties

The results of (13)C nuclear magnetic resonance (NMR) measurements on alkali fullerides KxC(60) are reported. The NMR spectra demonstrate that material with 0 < x < 3 is in fact a two-phase system at equilibrium, with x = 0 and x = 3. NMR lineshapes indicate that C(3-)(60) ions rotate rapidly in the K(3)C(60) phase at 300 K, while C(6)-(60) ions in the insulating K(6)C(60) phase are static on the time scale of the lineshape measurement. The temperature dependence of the (13)C spin-lattice relaxation rate in the normal state of K(3)C(60) is found to be characteristic of a metal, indicating the important role of the C(3-)(60) ions in the conductivity. From the relaxation measurements, an estimate of the density of electronic states at the Fermi level is derived.     

Electron solvation in finite systems: femtosecond dynamics of iodide. (Water)n anion clusters

Electron solvation dynamics in photoexcited anion clusters of I-(D2O)n=4-6 and I-(H2O)4-6 were probed by using femtosecond photoelectron spectroscopy (FPES). An ultrafast pump pulse excited the anion to the cluster analog of the charge-transfer-to-solvent state seen for I- in aqueous solution. Evolution of this state was monitored by time-resolved photoelectron spectroscopy using an ultrafast probe pulse. The excited n = 4 clusters showed simple population decay, but in the n = 5 and 6 clusters the solvent molecules rearranged to stabilize and localize the excess electron, showing characteristics associated with electron solvation dynamics in bulk water. Comparison of the FPES of I-(D2O)n with I-(H2O)n indicates more rapid solvation in the H2O clusters.     

Visualization of the molecular Jahn-Teller effect in an insulating K4C60 monolayer

We present a low-temperature scanning tunneling microscopy (STM) study of K(x)C60 monolayers on Au(111) for 3 < or = x < or = 4. The STM spectrum evolves from one that is characteristic of a metal at x = 3 to one that is characteristic of an insulator at x = 4. This electronic transition is accompanied by a dramatic structural rearrangement of the C60 molecules. The Jahn-Teller effect, a charge-induced mechanical deformation of molecular structure, is directly visualized in the K4C60 monolayer at the single-molecule level. These results, along with theoretical analyses, provide strong evidence that the transition from metal to insulator in K(x)C60 monolayers is caused by the Jahn-Teller effect.     

Influence of lactic acid bacteria,cellulase, cellulase-producing Bacillus pumilus and their combinations on alfalfa silage quality

This study assessed the effects of lactic acid bacteria(LAB), cellulase, cellulase-producing Bacillus pumilus and their combinations on the fermentation characteristics, chemical composition, bacterial community and in vitro digestibility of alfalfa silage. A completely randomized design involving a 8(silage additives)×3 or 2(silage days) factorial arrangement of treatments was adopted in the present study. The 8 silage additive treatments were: untreated alfalfa(control); two commercial additives(GFJ and Chikuso-1); an originally selected LAB(Lactobacillus plantarum a214) isolated from alfalfa silage; a cellulase-producing Bacillus(CB) isolated from fresh alfalfa; cellulase(C); and the combined additives(a214+C and a214+CB). Silage fermentation characteristics, chemical composition and microorganism populations were analysed after 30, 60 and 65 days(60 days followed by exposure to air for five additional days). In vitro digestibility was analysed for 30 and 60 days. Compared with the other treatments, selected LAB a214, a214 combined with either C or CB, and Chikuso-1 had the decreased(P0.001) pH and increased(P0.001) lactic acid concentrations during the ensiling process, and there were no differences(P0.05) among them. Fiber degradation was not significant(P≥0.054) in any C or CB treatments. The a214 treatment showed the highest(P=0.009) in vitro digestibility of dry matter(595.0 g kg~(–1) DM) after ensiling and the highest abundance of Lactobacillus(69.42 and 79.81%, respectively) on days 60 and 65, compared to all of other treatments. Overall, the silage quality of alfalfa was improved with the addition of a214, which indicates its potential as an alfalfa silage inoculant.