Selection for cold chipping genotypes from three early generations in a potato breeding program

Chipping potatoes are an important market for the processing industry. Of the traits influencing chip quality,chip color is market limiting since other traits have diminished value without light chip color. Cold (4 ^°C) storage can reduce storage losses and cultivars producing light colored chips directly from cold storage are needed for this reason. Selection for cold chipping cultivars is traditionally practiced by visual evaluation of progeny the first few years in the field, followed by selection for cold chipping in years 4–5. Early generation selection for cold chipping may reduce cultivar development time by identifying good chipping progeny, families and parents earlier in the breeding cycle. Progeny from 175 4x × 4x families were evaluated from three early generations. They were greenhouse grown tubers (GGT) evaluated after6 mo. storage using randomly selected progeny, and field grown single hills propagated from either seedling transplants (FTR), or from greenhouse grown tubers (FGT). Progeny from field grown generations were selected first by visual evaluation, and then by random selection and chipped after6 mo. (visual selections) or 3 and 6 mo. storage (random selections). Cold chipping progenies were found in all three early generations. The earliest generations for selection are GGT or FTR, but may be less efficient than FGT. Correlations suggest that reliable parent and family selection is possible using GGT data. Visual selection eliminated 4/5 of the good chipping progeny, while identifying 8 of 11,714 genotypes combining visual merit and cold chipping potential. Increased genetic variation and sexual polyploidization are possible strategies for increasing the number of desirable genotypes. This revised version was published online in August 2006 with corrections to the Cover Date.     

Early selection for extreme resistance to potato virus Y and tobacco etch virus in potato using a β-glucuronidase-tagged virus

The Ry_sto gene from Solanum stoloniferum introduced into potato cultivars (Solanum tuberosum L. ssp. tuberosum) confers resistance to potato virus A, potato virus V and potato virus Y (PVY). In addition to PVY, tobacco etch virus (TEV) and a TEV construct that encodes β‐glucuronidase (TEV‐GUS) were inoculated to determine the inheritance of resistance to these viruses in progenies obtained from potato cultivars containing the Ry_sto gene. While cultivars ‘Karlena’ and ‘Delikat’ were susceptible, ‘Bettina’ and clone 927eY were resistant to PVY, TEV and TEV‐GUS, as determined by enzyme linked immunosorbent assay, biotest and GUS assay, respectively. The segregation ratios obtained from the progenies of ‘Bettina’בDelikat’ and 816eY בKarlena’ indicate that resistances to PVY and TEV are governed by one dominant gene or two genes tightly linked in coupling phase. Evidently, Ry_sto confers broad spectrum resistance to potyviruses. TEV resistance could be reliably detected 4 days after inoculation with the TEV‐GUS construct by GUS assay. Therefore, the GUS‐tagged TEV construct can be used for early selection for resistances based on the gene Ry_sto or closely linked genes.     

Components of Visual Selection in Early Clonal Generations of a Potato Breeding Programme

In the first two clonal generations of a potato breeding programme, clones are visually selected for ‘plant appearance’. Selection for plant appearance based on unreplicated small plots is unreliable, due to significant genotype × environment interaction and high error variance. In order to improve the selection efficiency, component traits of plant appearance were identified and the effect of selection for these components was studied. Tuber yield was found to be the principal component of plant appearance while stolon length and tuber appearance contributed significantly, but to a lesser extent. Tuber yield had a higher heritability than plant appearance. Characters determining the appearance of stolons and tubers were found to have equal or lower heritabilities than plant appearance at 80 days after planting and somewhat higher heritabilities than plant appearance at 145 days after planting. Hence, since the expected and observed selection responses of the component characters have been found to be equivalent to that of plant appearance, selection for plant appearance cannot be improved upon by separately selecting for characters like tuber yield and tuber appearance.     

Molecular breeding for resistance to Phytophthora infestans (Mont.) de Bary in potato (Solanum tuberosum L.): a perspective of cisgenesis

Late blight caused by Phytophthora infestans is one of the most devastating diseases in potato cultivation and is mostly controlled by the application of chemicals. However, introduction of combinations of resistance ( R ) genes conferring broad-spectrum resistance from wild Solanum species into cultivated potatoes is considered the most practical and promising approach to achieve durable resistance. This can be realized via classical breeding or genetic modification (GM). Because classical breeding is very time-consuming and is often hampered by linkage drag, a GM approach seems logic in this heterozygous and vegetatively propagated crop. During the last decades, many R genes have been identified in several wild Solanum species. Some have been cloned and more will follow. When these genes are derived from species crossable with cultivated potato (so-called cisgenes), application in resistance breeding using a GM approach is similar to an introgression breeding approach, in that the exploited genes are indigenous to the crop. Pending deregulation or derogation of cisgenesis, the use of cisgenic R genes would be an ideal strategy to accomplish durable resistance in potato.     

Improvement of diagnostic markers for resistance to Globodera pallida and application for selection of resistant germplasms in potato breeding

Occurrence of pale potato cyst nematode, Globodera pallida (Stone) Behrens, was first recorded in Japan in 2015. Among several control measures, cultivation of resistant potato (Solanum tuberosum L.) varieties is the most effective in cost and environmental impact. As no G. pallida-resistant varieties have yet been developed in Japan, great emphasis is being placed on screening of germplasm possessing the resistance and development of the resistant varieties. In this study, we first improved previously reported DNA markers linked to the G. pallida resistance loci (GpaIV^s_adg and Gpa5) and then used these to screen more than 1,000 germplasms to select several candidate germplasms with resistance. We performed inoculation testing on the selected candidates and identified several resistant germplasms to the Japanese G. pallida population. Furthermore, we developed a simultaneous detection method combining three DNA markers linked to G. pallida and Globodera rostochiensis (Wollenweber) Behrens resistance loci. We validated the ability of C237-I marker to select resistant allele of GpaIV^s_adg and predict the presence of resistance in a Japanese breeding population. Resistant germplasms identified in this study could potentially be used to develop G. pallida-resistant varieties. The marker evaluation methods developed in this study will contribute to the efficient development of resistant varieties.     

Breeding behavior of yield components and hollow heart in tetraploid-diploid vs. conventionally derived potato hybrids

Summary A factorial mating design with six 4x cultivars as stylar parents mated to three groups of pollen parents (4x cultivars, 4x high protein selections, and 2x S. phureja) was used to study breeding behavior of yield, tuber set, marketable yield and hollow heart in potatoes. Mean yield for the 4x-2x hybrids was equivalent to that of their cultivar parents although yield components, tuber set and average tuber size, were greater and less, respectively, than the cultivar parents. High estimates of general combining ability were found in both pollen and stylar parents for yield, tuber set, marketable yield, number of marketable tubers and hollow heart in all three hybrid populations. Specific combining ability estimates were significant only for yield and hollow heart. Frequency of white-fleshed 4x-2x progeny of five heterozygous yellow-fleshed 2x phureja genotypes was used to confirm cytological identification of a first division restitution mechanism operative in the 2x parents. Although three of these phureja genotypes generated high-yielding progeny, two others produced 4x-2x progeny with mean yield similar to that of hybrids among 4x cultivars.Scientific journal series article 11,601 of the Minnesota Agricultural Experiment Station.     

Adaptation to day length and yield stability of families from 4x×2x crosses in potato

Summary The objectives of this research were to evaluate the response to day length and the yield stability of environments of 4x families from 4x×2x crosses in potato. Twenty families from crosses between 4x female parents with different genetic backgrounds and 2x parents, which formed 2n pollen by first division restitution and were selected under short days, were evaluated in four locations in Peru (short days) and during two years at Rhinelander, USA (long days). Results from the USA indicate that the 4x progeny from 4x×2x crosses were very late maturing and poor yielding.Further, vine maturity, tuber size and tuber number are highly correlated with the percentage of Tuberosum germplasm in the parentage. Results from Peru indicate that most 4x×2x families had high tuber yield, stability for yield and high dry matter content. The lack of correlation between rank order of the parental value, based on progeny testing, of the male and female parents among short day locations and between short and long day environments indicates that selection of parents must be done in each location in which the final product, either a family or a clone, will be used.International Potato Center (CIP)     

Correlations within and between characters between and within generations as a measure for the early generation selection in potato breeding

Summary The main objective was to determine the reliability of selection in early generations of a potato breeding programme. To that end data were recorded in the seedling generation, an early and a late harvested experiment of the first clonal generation and the late harvested second clonal generation on up to 30 genotypes of 55 populations from crosses of three Solanum tuberosum ssp. tuberosum cultivars and seven selected S. tuberosum ssp. andigena clones, adapted to the northern temperate zone. Phenotypic correlations were computed per population in almost all possible combinations within and between characters between and within generations. The mean across 55 comparable correlation coefficients was considered to be the best estimate of the relationship concerned.In all four experiments data were collected on number of tubers, tuber yield and mean tuber weight; in the three experiments of the two clonal generations in addition on date of emergence, number of stems, plant height, haulm type, and general impression of the underground plant parts and in the two late harvested clonal generations on date of maturity and under water weight.The results confirmed that general impression which is largely decisive for the selection in early generations, is a little reliable measure. However, from the magnitude of the mean correlations between experiments within characters it must be concluded that selection for most of these separate characters is hardly more reliable. An exception was date of maturity for which a mean correlation was determined of r=0.78 between the two clonal generations. The second strongest mean correlations, perhaps surprisingly, were for tuber yield, viz. r=0.52 between the seedling generation and the late harvested first as well as the second clonal generation and r=0.63 between the late harvested clonal generations. From the correlations between characters it appeared that for a high tuber yield, besides its components, in particular an early emergence, a large plant height, an attractive haulm type and a late maturity are of importance.The main conclusion is that, as long as not enough seed tubers are available for the layout of statistically sound experiments, a negative instead of a positive selection should be applied to avoid the rejection of most of the valuable genotypes in an early stage. On the basis of the results directives for the application of such a negative selection are given.     

Resistance to Pseudomonas solanacearum in the potato: I. Effects of sources of resistance and adaptation

Summary F1 hybrid true potato seed progenies with multiple sources of specific resistance to Pseudomonas solanacearum and adaptation were evaluated under tropical greenhouse conditions for resistance to a race 1 isolate of P. solanacearum. Results indicated that genes for adaptation are involved in conferring resistance to bacterial wilt. The effect of a particular resistant parent clone on the resistance level of its progeny depended on the resistance, adaptation or the combination of both characteristics of its mate. A heat tolerant parent gave a higher frequency of resistant offspring in combination with an ascertained source of resistance. Combining ability was an apparent feature of resistance to bacterial wilt and resistance was highest in the majority of the crosses that had a wide genetic background for both resistance and adaptation. The possible genetic nature of the resistance to bacterial wilt is discussed.     

The effect of seed tuber weight on characters in the first and the second clonal generation of potato populations

Summary Fifty-five populations from crosses of three Solanum tuberosum ssp. tuberosum cultivars and seven selected S. tuberosum ssp. andigena clones adapted to the northern temperate zone have been studied in the seedling and the first and second clonal generation. This paper only deals with the effect of seed tuber weight on various important agronomic characters which are selected for in early clonal generations, independently of the type of crosses.The results showed that a distinction has to be made between the effects of differences in seed tuber weight within and between seedlings, i.e. genotypes. The effects on the first clonal generation of differences in weight of the tubers within seedlings and those of the first heaviest tubers between seedlings were similar and comparable to seed tuber weight effects within cultivars. In contrast to the within seedlings effects the between seedlings effects proved to be heritable. This is concluded from the fact that, on average, independent of seed tuber weight seedlings with larger first heaviest tubers performed better in the second clonal generation than those with smaller ones. Notably plant height, general impression, date of maturity and particularly tuber yield and mean tuber weight in the second clonal generation were related to the weight of the first heaviest tubers of the seedlings. The potentialities of these findings for an early generation selection are discussed.     

Early generation selection for potato tuber quality in progenies of late blight resistant parents

Developing disease resistant cultivars is one of the major objectives for a potato (Solanum tuberosum L.) breeding program, but many resistant clones have not achieved commercial acceptance because of late maturity and non-marketable tuber characteristics. Selection for tuber quality should have greater emphasis inbreeding disease resistant cultivars. The objectives of this study were 1) to evaluate the ability of late blight (Phytophthora infestans (Mont.) de Bary) resistant parents to transmit chip-processing (tuber appearance, specificgravity, and chip-color) or tablestock (tuber appearance) quality to the offspring and 2) to compare selecting for tuber quality in single-hill versus eight-hill generations. We made crosses among eight unadapted potato cultivars (B0718-3,Bertita, Bzura, Greta, Libertas, Stobrawa, Tollocan, and Zarevo) with reported late blight resistance with adapted susceptible cultivars/breeding clones to generate 95populations (4,750 seedlings). Approximately 10% of the progeny from each cross were selected from single-hill plots based on tuber appearance, number, shape, and internal defects. These selected clones (408) were evaluated for tuber appearance, specific gravity, and chip-color. The same evaluations in the following year were made on tuber samples from eight-hill plots. Libertas and Tollocan were the best parents for transmitting chip-color; B0718-3, Zarevo, and Tollocan for transmitting tuber appearance; and Bzura, Libertas, and Zarevo for transmitting high specific gravity to the highest percentage of the offspring. Overall, 50% and 56% of the clones based on single- and eight-hill generation, respectively, were considered to possess chip-processing quality; over 90% of the clones had acceptable tablestock quality. A total of 71% of the clones possessing acceptable chip-processing and 95% of the clones possessing acceptable tablestock quality selected in both generations were identified in single-hill plots. The evaluation of tuber quality characteristics in single-hill generation not only permitted the identification of clones with acceptable chip-processing and tablestock, but also increased the amount of clonal information for the following generation of selection. In crosses between late blight resistant and susceptible clones, selection for tuber quality traits can be initiated in single-hill generation using a moderate selection intensity and precede late blight testing. This revised version was published online in August 2006 with corrections to the Cover Date.     

Molecular breeding for the BaMMV/BaYMV resistance gene ym4 in winter barley

The aim of this investigation was to develop a procedure for the largescale molecular breeding for ym4, allowing resistance to BaMMV/BaYMV to be fixed in early breeding generations of winter barley. A codominant STS marker derived from the restriction fragment length polymorphism marker MWG838 for the ym4 resistance gene was combined with a new and easy procedure for preparing leaf samples for polymerase chain reaction (PCR), theoretically allowing one person to extract DNA from 5000 samples in a single day. In the procedure for molecular breeding for ym4, all steps, including leaf sampling, DNA extraction, PCR amplification and digestion with restriction enzyme were assembled in microtitre plates allowing multipipetting throughout the procedure, including the loading of gels. The method is amenable to further automation with the aid of a robot arm. Double haploid (DH) lines, as well as F₂ and F₄ breeding lines were analysed and, based on markers, homozygous and heterozygous BaMMV/BaYMV resistant plants were identified for further breeding. The winter barley breeding programmes were modified to include marker-based selection for BaMMV/BaYMV resistance on DH or on F₂ individuals, which had been preselected for mildew and leaf rust resistance.     

Somaclonal variation for resistance to Verticillium dahliae in potato (Solanum tuberosum L.) plants regenerated from callus

Summary Plant tissue culture is recognized as an important tool to generate useful genetic variability for crop improvement. Regenerated plants from callus induced from stem explants of Solanum tuberosum cv Désirée were assessed by in vitro selection, for resistance to Verticillium dahliae. This fungus is the causal agent of Verticillium wilt, a serious vascular wilt disease both in crops and wild species.The rate of in vitro multiplication by single node cuttings was used as a parameter of screening in two selection cycles with different concentrations of V. dahliae filtrate. One resistant clone was selected and then evaluated by inoculation in the growth chamber. Induced damage, and morphological traits (dry weight, leaf area and tuber production) were estimated. The selected clone was comparable to the resistant control, cv Kondor.The results suggest that genetic variation induced in tissue culture cound be utilized to generate disease resistance.