Effects of cryostabilizers, low temperature, and freezing on the kinetics of the pectin methylesterase-catalyzed de-esterification of pectin

The kinetics of the pectin methylesterase (PME)-catalyzed de-esterification of pectin was studied at 25 degrees C in the presence of sucrose, fructose, maltodextrin (DE = 16.5-19.5), and carboxymethylcellulose at different concentrations and in the presence of maltodextrin and sucrose at different concentrations in a temperature range between +25 and -4 degrees C in subcooled and frozen states. The objective was to determine whether the reaction is diffusion-controlled, to gain insight about the factors determining the diffusion of the reactants, and to determine the effect of the carbohydrates, low temperature, and freezing on the structural conformation of the enzyme. The results indicate that the PME-catalyzed de-esterification of pectin is diffusion-controlled. Nevertheless, the diffusion is not controlled by the macroviscosity of the reaction medium, but rather by the microviscosity experienced by the diffusants. Low temperature in the temperature range studied does not affect the structural conformation of the enzyme, while freezing seems to have some effect.     

Inactivation of apple pectin methylesterase induced by dense phase carbon dioxide

The inactivation of apple pectin methylesterase (PME) with dense phase carbon dioxide (DPCD) combined with temperatures (35-55 degrees C) is investigated. DPCD increases the susceptibility of apple PME to the temperatures and the pressures have a noticeable effect on apple PME activity. A labile and stable fraction of apple PME is present and the inactivation kinetics of apple PME by DPCD is adequately described by a two-fraction model. The kinetic rate constants k L and k S of labile and stable fractions are 0.890 and 0.039 min (-1), and the decimal reduction times D L and D S are 2.59 and 58.70 min at 30 MPa and 55 degrees C. Z T representing temperature increase needed for a 90% reduction of the D value and the activation energy E a of the labile fraction at 30 MPa is 22.32 degrees C and 86.88 kJ /mol, its Z P representing pressure increase needed for a 90% reduction of the D value and the activation volume V a at 55 degrees C is 21.75 MPa and -288.38 cm (3)/mol. The residual activity of apple PME after DPCD exhibits no reduction or reactivation for 4 weeks at 4 degrees C.     

Mode of de-esterification of alkaline and acidic pectin methyl esterases at different pH conditions

Highly esterified citrus pectin was de-esterified at pH 4.5 and 8.0 by a fungal pectin methyl esterase (PME) that was shown to have an acidic isoelectric pH (pI) and an acidic pH optimum and by a plant PME that was characterized by an alkaline pI and an alkaline pH optimum. Interchain and intrachain de-esterification patterns were studied by digestion of the pectin products with endo-polygalacturonase and subsequent analysis using size exclusion and anion-exchange chromatography. No effect of pH was observed on the de-esterification mode of either of the two enzymes. Acidic, fungal PME converted pectin according to a multiple-chain mechanism, with a limited degree of multiple attack at the intrachain level, both at pH 4.5 and at pH 8.0. A multiple-attack mechanism, with a high degree of multiple attack, was more appropriate to describe the action mode of alkaline, plant PME, both at pH 4.5 and at pH 8.0.     

Thermal inactivation of pectin methylesterase,polygalacturonase, and peroxidase in tomato juice

Thermal inactivation kinetics have been determined for pectin methylesterase (PME), polygalacturonase (PG), and peroxidase (POD) in tomato juice. Two parameters, the inactivation rate constant (k) at a reference temperature and the activation energy for inactivation (E(a)), were determined for each enzyme. For PME and PG, the k and E(a) values reported here do not agree with those in several previously published reports. These differences can be explained either by the differences in pH values used for inactivation determinations or by inadequacies in the heating methods used in some previous studies. POD showed simple first-order inactivation kinetics and was less thermally stable than either PME or PG. When different cultivars of tomatoes were evaluated, there was no difference in the thermal inactivation kinetics of these enzymes.     

Activity and process stability of purified green pepper (Capsicum annuum) pectin methylesterase

Pectin methylesterase (PME) from green bell peppers (Capsicum annuum) was extracted and purified by affinity chromatography on a CNBr-Sepharose-PMEI column. A single protein peak with pectin methylesterase activity was observed. For the pepper PME, a biochemical characterization in terms of molar mass (MM), isoelectric points (pI), and kinetic parameters for activity and thermostability was performed. The optimum pH for PME activity at 22 degrees C was 7.5, and its optimum temperature at neutral pH was between 52.5 and 55.0 degrees C. The purified pepper PME required the presence of 0.13 M NaCl for optimum activity. Isothermal inactivation of purified pepper PME in 20 mM Tris buffer (pH 7.5) could be described by a fractional conversion model for lower temperatures (55-57 degrees C) and a biphasic model for higher temperatures (58-70 degrees C). The enzyme showed a stable behavior toward high-pressure/temperature treatments.     

Lipoxygenase inactivation in green beans (Phaseolus vulgaris L.) due to high pressure treatment at subzero and elevated temperatures

The kinetics of lipoxygenase (LOX) inactivation in green beans due to high-pressure treatment were studied in the pressure-temperature area of 0.1 up to 650 MPa and -10 up to 70 degrees C for systems with different levels of food complexity, i.e., in green bean juice and intact green beans (in situ study). For both systems, LOX was irreversibly inactivated by high-pressure treatment combined with subzero and elevated temperatures and the inactivation could be described as a first-order reaction. At ambient pressure, in situ LOX was less thermostable than in the juice at temperatures below 68 degrees C whereas the stability ranking was reverse at temperatures above 68 degrees C. At temperatures below 63 degrees C, sensitivity of the inactivation rate constants to temperature changes was on the same order of magnitude in the juice and in situ, while at higher temperature it was lower in situ. The pressure needed to obtain the same rate of LOX inactivation at a given temperature was lower in situ than in the juice. Application of high-pressure treatment at low/subzero temperature resulted in an antagonistic effect on LOX inactivation for both systems, whereas no such effect was found above room temperature. The pressure-temperature dependence of the LOX inactivation rate constants in green beans was successfully modeled.     

Nonenzymatic degradation of citrus pectin and pectate during prolonged heating: effects of pH, temperature, and degree of methyl esterification

The underlying mechanisms governing nonenzymatic pectin and pectate degradation during thermal treatment have not yet been fully elucidated. This study determined the extent of nonenzymatic degradation due to beta-elimination, acid hydrolysis, and demethylation during prolonged heating of citrus pectins and its influence on physicochemical properties. Solutions of citrus pectins, buffered from pH 4.0 to 8.5, were heated at 75, 85, 95, and 110 degrees C for 0-300 min. Evolution of methanol and formation of reducing groups and unsaturated uronides were monitored during heating. Molecular weight and viscosity changes were determined through size exclusion chromatography and capillary viscometry, respectively. Results showed that at pH 4.5, the activation energies of acid hydrolysis, beta-elimination, and demethylation are 95, 136, and 98 kJ/mol, respectively. This means that at this pH, acid hydrolysis occurs more rapidly than beta-elimination. Furthermore, the rate of acid hydrolysis is diminished by higher levels of methyl esterification. Also, citrus pectin (93% esterified) degrades primarily via beta-elimination even under acidic conditions. Acid hydrolysis and beta-elimination caused significant reduction in relative viscosity and molecular weight.     

Heat inactivation and reactivation of broccoli peroxidase

Heat inactivation characteristics differed for acidic (A), neutral (N), and basic (B) broccoli peroxidase. At 65 degrees C, A was the most heat stable followed by N and B. The activation energies for denaturation were 388, 189, and 269 kJ/mol for A, N, and B, respectively. Reactivation of N occurred rapidly, within 10 min after the heated enzyme was cooled and incubated at room temperature. The extent of reactivation varied from 0 to 50% depending on the isoenzyme and heating conditions (temperature and time). The denaturation temperature allowing the maximum reactivation was 90 degrees C for A and horseradish peroxidase (HRP) and 70 and 80 degrees C for B and N, respectively. In all cases, heat treatment at low temperatures for long times prevented reactivation of the heated enzymes. Calcium (5 mM) increased the thermal stability of N and B but had no effect on reactivation. The presence of 0.05% bovine serum albumin decreased thermal stability but increased the extent of reactivation of A..     

Role of cations in the catalysis of thermostable pectinmethylesterase extracted from Marsh grapefruit pulp

The de-esterification of high methoxyl pectin by thermostable pectinmethylesterase (TS-PME) from Marsh grapefruit was studied at pH 7.5, in a temperature range between 25 degrees and 50 degrees C and in the presence of various cations. Arrhenius plots were constructed for CaCl(2) (5 to 20 mM), SrCl(2) (5 to 20 mM), and spermidine (2.5 to 10 mM) added reactions. Enthalpy (DeltaH()) and entropy (DeltaS()) of activation changed with cation type and concentration. The presence of cations modified the free energy of the resulting enzyme/substrate complex. The entropy of activation was positive at all concentrations of CaCl(2) studied, and negative in the same concentration range with SrCl(2). Reactions with spermidine showed negative entropy of activation at concentrations <5 mM and positive values of entropy at higher concentrations.     

Influence of critical storage temperatures on degradative pathways of pigments in green beans (Phaseolus vulgaris cvs. Perona and boby)

In this work a study of critical storage temperatures on pigment degradation of green beans (Phaseolus vulgaris, cvs. Perona and Boby) was conducted. In this way, green beans kept better quality at 4 degrees C than either 8 or 12 degrees C, maintaining a bright green color and good texture. Nevertheless, temperatures of 4 degrees C induced chilling injury (CI) after eight days of storage, which became evident when the pods were transferred to 20 degrees C. Cold storage temperatures, 12, 8, and 4 degrees C, produced different changes on the green beans chlorophyll profile. Green beans of both cultivars, Perona and Boby, stored at 4 and 12 degrees C showed a continuous degradation of chlorophyll pigments during storage, while samples stored at 8 degrees C showed an increase of chlorophyll content at the first 15 days. Carotenoid pigments also suffered different changes during cold storage. Perona was the green beans cultivar which maintained the higher level of lutein, mainly when samples were stored at the most suitable temperature (8 degrees C).     

Extraction of green labeled pectins and pectic oligosaccharides from plant byproducts

Green labeled pectins were extracted by an environmentally friendly way using proteases and cellulases being able to act on proteins and cellulose present in cell walls. Pectins were isolated from different plant byproducts, i.e., chicory roots, citrus peel, cauliflower florets and leaves, endive, and sugar beet pulps. Enzymatic extraction was performed at 50 degrees C for 4 h, in order to fulfill the conditions required for microbiological safety of extracted products. High methoxy (HM) pectins of high molar mass were extracted with three different enzyme mixtures. These pectins were subsequently demethylated with two pectin methyl esterases (PMEs), either the fungal PME from Aspergillus aculeatus or the orange PME. It was further demonstrated that high molar mass low methoxy (LM) pectins could also be extracted directly from cell walls by adding the fungal PME to the mixture of protease and cellulase. Moreover, health benefit pectic oligosaccharides, the so-called modified hairy regions, were obtained after enzymatic treatment of the residue recovered after pectin extraction. The enzymatic method demonstrates that it is possible to convert vegetable byproducts into high-added value compounds, such as pectins and pectic oligosaccharides, and thus considerably reduce the amount of these residues generated by food industries.     

Vacuum infusion of plant or fungal pectinmethylesterase and calcium affects the texture and structure of eggplant

The effect of vacuum infusion on eggplant quality of a commercial fungal (Aspergillus niger) and citrus pectinmethylesterase (PME) with calcium chloride (4000 ppm) was investigated after processing and during storage. Firmness of infused eggplants using fungal or citrus PME was significantly increased compared to controls (fresh noninfused and water-infused control) after processing and during storage for 7 days at 4 degrees C. Activity of fungal PME-infused eggplant increased almost 32 times, whereas activity of eggplant infused with Marsh grapefruit PME increased 2-fold. Degree of esterification of pectin of eggplants infused with fungal or citrus PME decreased slightly. Cryo-SEM showed that samples treated with fungal PME/ CaCl2 displayed more integrity among cells as compared with water-infused control. The change of pectin in the cell wall was visualized using monoclonal antibodies JIM5 (low-esterified pectin) and JIM7 (high-esterified pectin). JIM5 showed more binding than JIM7 with the cell walls of eggplant tissues from fungal PME/ CaCl2 treatment.     

Contribution of tomato phenolics to antioxidation and down-regulation of blood lipids

This study was performed to understand the characteristics and biological activities of phenolics in tomatoes and to examine the effect of tomato on the regulation of blood lipids. Tomatoes of both big and small sizes were used fresh, after blanching, or after blanching and heating. Moreover, a human clinical trial was conducted to examine plasma antioxidation, status of blood lipids, and phenolic responses after ingestion of fresh tomato, tomato juice, and a lycopene drink. The contents of tomato phenolics were increased by 34% for small tomato and by 23% for big tomato after treatment by blanching and heating at 100 degrees C for 30 min. Tomato phenolics showed fair antioxidant activity (57-71%) and also synergistically promoted the antioxidation (81-100%) of tomato carotenoids. In the human clinical study, total antioxidant capacity and phenolic contents in plasma were increased after administration of fresh tomato and tomato juice, but no significant difference was found for lycopene drink consumption. Triglyceride levels and low-density lipoprotein cholesterol were decreased after administration of fresh tomato and tomato juice, and high-density lipoprotein cholesterol was increased.     

Elimination of trypsin inhibitor activity and beany flavor in soy milk by consecutive blanching and ultrahigh-temperature (UHT) processing

Soy foods contain significant health-promoting components but also may contain beany flavor and trypsin inhibitor activity (TIA), which can cause pancreatic disease if present at a high level. Thermal processing can inactivate TIA and lipoxygenase. Ultrahigh-temperature (UHT) processing is relatively new for manufacturing soy milk. Simultaneous elimination of TIA and soy odor by UHT processing for enhancing soy milk quality has not been reported. The objective was to determine TIA in soy milk processed by traditional, steam injection, blanching, and UHT methods and to compare the products with commercial soy milk products. Soybean was soaked and blanched at 70-85 degrees C for 30 s-7.5 min. The blanched beans were made into base soy milk. The hexanal content of the base soy milk was determined by gas chromatography to determine the best conditions for further thermal processing by indirect and direct UHT methods at 135-150 degrees C for 10-50 s using the Microthermics processor. Soy milk was also made from soaked soybeans by traditional batch cooking and steaming methods. Eighteen commercial products were selected from the supermarket. Residual TIA in soy milk processed by the traditional and steam injection to 100 degrees C for 20 min was approximately 13%. Blanching could inactivate 25-50% of TIAs of the raw soy milk. The blanch conditions of 80 degrees C and 2 min were selected for UHT processing because these conditions produced blanched soy milk without hexanal, indicating a complete heat inactivation of lipoxygenases. The TIA decreased with increased temperature and time of UHT heating. The maximal trypsin inhibitor inactivation was achieved by UHT direct and indirect methods with residual activities of approximately 10%. Some commercial soy milk products contained high TIAs. The results are important to the food industry and consumers. Kinetic analysis showed that heat inactivation (denaturation) of TIA, under the continuous processing conditions of the Microthermics processor, followed first-order reaction kinetics, and the activation energy of the inactivation was 34 kJ/mol.     

Tomato (Lycopersicon esculentum) pectin methylesterase and polygalacturonase behaviors regarding heat- and pressure-induced inactivation.

The combined high pressure/thermal (HP/T) inactivation of tomato pectin methyl esterase (PME) and polygalacturonase (PG) was investigated as a possible alternative to thermal processing classically used for enzyme inactivation. The temperature and pressure ranges tested were from 60 degrees C to 105 degrees C, and from 0.1 to 800 MPa, respectively. PME, a heat-labile enzyme at ambient pressure, is dramatically stabilized against thermal denaturation at pressures above atmospheric and up to 500-600 MPa. PG, however, is very resistant to thermal denaturation at 0.1 MPa, but quickly and easily inactivated by combinations of moderate temperatures and pressures. Selective inactivation of either PME or PG was achieved by choosing proper combinations of P and T. The inactivation kinetics of these enzymes was measured and described mathematically over the investigated portion of the P/T plane. Whereas medium composition and salinity had little influence on the inactivation rates, PME was found less sensitive to both heat and pressure when pH was raised above its physiological value. PG, on the other hand, became more labile at higher pH values. The results are discussed in terms of isoenzymes and other physicochemical features of PME and PG.     

Partial purification and characterization of pectin methylesterase from acerola (Malpighia glabra L.)

The enzyme pectin methylesterase (PME) is present in acerola fruit and was partially purified by gel filtration on Sephadex G-100. The results of gel filtration showed different PME isoforms. The total PME (precipitated by 70% salt saturation) and one of these isoforms (fraction from Sephadex G-100 elution) that showed a molecular mass of 15.5 +/- 1.0 kDa were studied. The optimum pH values of both forms were 9.0. The total and the partially purified PME showed that PME specific activity increases with temperature. The total acerola PME retained 13.5% of its specific activity after 90 min of incubation at 98 degrees C. The partially purified acerola (PME isoform) showed 125.5% of its specific activity after 90 min of incubation at 98 degrees C. The K(m) values of the total PME and the partially purified PME isoform were 0.081 and 0.12 mg/mL, respectively. The V(max) values of the total PME and the partially purified PME were 2.92 and 6.21 micromol/min/mL/mg of protein, respectively.     

Effect of intrinsic and extrinsic factors on the interaction of plant pectin methylesterase and its proteinaceous inhibitor from kiwi fruit

A proteinaceous pectin methylesterase inhibitor (PMEI) was isolated from kiwi fruit (Actinidia chinensiscv. Hayward) and purified by affinity chromatography on a cyanogen bromide (CNBr) Sepharose 4B-orange PME column. The optimal pH of banana PME activity was 7.0, whereas that for carrot and strawberry PME activity was 9.0. The optimal pH for the binding between kiwi fruit PMEI and these PMEs was 7.0. The kiwi fruit PMEI has a different affinity for PME depending on the plant source. The inhibition kinetics of kiwi fruit PMEI to banana and strawberry PME followed a noncompetitive type, whereas that to carrot PME followed a competitive type. The kiwi fruit PMEI was mixed with banana, carrot, and strawberry PME to obtain PMEI-PME complexes, which were then subjected to thermal (40-80 degrees C, atmospheric pressure) or high-pressure (10 degrees C, 100-600 MPa) treatment. Experimental data showed that the PMEI-PME complexes were easily dissociated by both thermal and high-pressure treatments.     

Transacylation and de-esterification reactions of pectin as catalyzed by pectinesterases from tomato and citrus

The optimal conditions for the de-esterification reaction of tomato pectinesterase (PE) and citrus PE was 0.1-0.2 M NaCl and at pH 7.5-8.5, 65 degrees C, almost identical to those for the transacylation reaction as observed by turbidity (absorbance at 400 nm) change. Among the PEs tested, pea pod PE presented the most remarkable catalysis on the transacylation reaction, and 1.5% pectin solution was determined to be suitable for this reaction. Low methoxy pectin with a DE (degree of esterification) of 31% displayed a slow turbidity increase, revealing that the extent of DE was influential on the transacylation. Besides citrus pectin, apple pectin was also proved to progress transacylation reaction by PEs from tomato and citrus sources as apparently observed by turbidity method.     

Effects of heat treatment and dehydration on properties of cauliflower fiber

The effects of heat treatment and dehydration on fiber structure and hydration properties, using cauliflower floret/curd and stem tissues, have been investigated. No major changes in fiber composition resulted from sample treatments, but the degree of esterification of pectic polysaccharides, approximately 60% in fresh cauliflower, decreased by approximately 12% in samples heated at temperatures >40 degrees C. Enzymic activity was considered to be responsible, through pectin methyl esterase activity. De-esterification was temperature and moisture sensitive. Hydration properties were also affected by processing conditions. The solubility of nonstarch polysaccharides in fresh, freeze-dried, and 40 degrees C dried samples was approximately 6% but increased to 12% in boiled samples and decreased in samples dried at 75 degrees C. Similar behavior occurred for swelling and water retention capacity (WRC), with swelling and WRC highest for boiled samples and lowest for samples dried at 75 degrees C. Hence, a decrease in de-esterification was not directly responsible for changes in hydration properties. The results demonstrate the importance of processing history on functional properties and on the preparation of fiber-rich ingredients for successful incorporation into foods.     

Thermal stability of anthocyanin extract of Hibiscus sabdariffa L. in the presence of beta-cyclodextrin

The thermal stability of anthocyanin extract isolated from the dry calyces of Hibiscus sabdariffa L. was studied over the temperature range 60-90 degrees C in aqueous solutions in the presence or absence of beta-cyclodextrin (beta-CD). The results indicated that the thermal degradation of anthocyanins followed first-order reaction kinetics. The temperature-dependent degradation was adequately modeled by the Arrhenius equation, and the activation energy for the degradation of H. sabdariffa L. anthocyanins during heating was found to be approximately 54 kJ/mol. In the presence of beta-CD, anthocyanins degraded at a decreased rate, evidently due to their complexation with beta-CD, having the same activation energy. The formation of complexes in solution was confirmed by nuclear magnetic resonance studies of beta-CD solutions in the presence of the extract. Moreover, differential scanning calorimetry revealed that the inclusion complex of H. sabdariffa L. extract with beta-CD in the solid state was more stable against oxidation as compared to the free extract, as the complex remained intact at temperatures 100-250 degrees C where the free extract was oxidized. The results obtained clearly indicated that the presence of beta-CD improved the thermal stability of nutraceutical antioxidants present in H. sabdariffa L. extract, both in solution and in solid state.