Automatic flow system with voltammetric detection for diacetyl monitoring during brewing process

Diacetyl can be determined by adsorptive stripping voltammetry after derivatization with o-phenylenediamine. The method may be applicable to the determination of diacetyl in different foods, being a good alternative to other analytical methods. In this work an on-line automated analytical system for diacetyl determination in beer is described. A hanging mercury drop electrode voltammetric flow detector was used, and the analyte was determined without the traditional deoxygenation procedure. The method was successfully applied to the determination of diacetyl during beer fermentation and in the final product. The automation strategy used was based on a flow network similar to those used in multicommutated flow systems, with a pervaporation unit used for diacetyl separation. The developed system was tested in real conditions in the monitoring of brewing processes. The results obtained were similar to those obtained with the usual GC-ECD methodology in the 5-600 ppb range. The analytical rate of the developed method is about 12 determinations/h.     

Differential pulse polarographic determination of sulfites in foods: collaborative study

A differential pulse polarographic (DPP) method for the determination of "free" and "total" sulfite in foods was collaboratively studied by 8 laboratories. The collaborators analyzed blind duplicate samples of shrimp, orange juice, peas, dried apricots, and dehydrated potatoes. Collaborators also analyzed the same samples spiked with sulfites at 2 levels, which ranged from 10 to 1100 micrograms added SO2/g. The variability of free SO2 results was excessive for quantitative analysis, but the method can be used for qualitative detection of free SO2. The method for total SO2 determination was suitable for as low as approximately 10 micrograms/g. Recoveries are comparable to those for the official Monier-Williams method at high levels and are superior at low levels. The method has been adopted official first action for determination of total SO2 in the foods studied.     

Ion chromatographic determination of sulfites in foods

Ion chromatography (IC) is shown to be a promising technique for the determination of sulfites (SO2, SO2/3-) in foods. Results of a 10 min flash distillation and 10 min IC determination compare favorably with the results from the conventional Monier-Williams method for total sulfite in a variety of food matrices. The IC technique also provides a wealth of additional information, such as (1) sulfite and sulfate (oxidized sulfite) content of the spiking or treatment solution, (2) residual sulfite applied to the food after oxidation losses in the treatment process, (3) free sulfite in foods, and (4) total sulfite in foods. As a further check on the Monier-Williams method, the sulfate content of the trapping solution can be determined by IC. Because the IC technique traps the liberated SO2 in a non-oxidizing rather than an oxidizing medium, it is considered free from interfering sulfides and organic sulfur-containing groups which can give false positives in the Monier-Williams method. IC thus offers a high speed, more sensitive, and cost-effective alternative to conventional techniques for the determination of sulfite in foods.     

Single-drop and nanogram level determination of sulfite (SO3(2-)) in alcoholic and nonalcoholic beverage samples based on diffuse reflectance fourier transform infrared spectroscopic (DRS-FTIR) analysis on KBr matrix

The diffuse reflectance Fourier transform spectroscopic (DRS-FTIR) method, using potassium bromide matrix, has been developed for the one-drop microdetermination of sulfite in beverage samples. The present method is very simple, rapid, and precise for the determination of sulfite. The nanogram level of sulfite determination is based on the selection of a quantitative analytical peak at 495 cm (-1) among the three observed vibrational peaks obtained by diffuse reflectance Fourier transform infrared spectroscopy (DRS-FTIR). As little as a single drop of sample is sufficient for quantitative analysis of sulfite. The limit of detection (LOD) and the limit of quantification (LOQ) of the method are found to be 8 and 40 ng of SO 3 (2-) 0.1 g (-1) of KBr matrix, respectively. The linear range of the method (LR) as well as the LOD based on the concentration of sulfite in the solution are 5-500 and 0.8 microg/mL, respectively. The precision in terms of standard deviation and relative standard deviation value at a level of 100 ng of SO 3 (2-) 0.1 g (-1) of KBr for n = 10 are found to be 2 ng of SO 3 (2-) and 2.3%, respectively. The relative standard deviation ( n = 10) for the determination of sulfite in beverage samples available in the local market was observed to be in the range of 2.4-7.8%. The method is free from interionic effects of foreign species. No sample pretreatment is required in this method. The proposed method avoids the requirement of large numbers and bulk amounts of reagents. The method is well-suited to the need of green chemistry.     

Kolorimetrische Bestimmung von Dicyandiamid in Böden

A colorimetric method for the determination of dicyandiamide in soils A colorimetric method derived from the diacetyl reaction for the determination of creatine has been developed for the determination of dicyandiamide in soil extracts. Dicyandiamide reacts with 1-naphtol and diacetyl forming a red colour complex with maximum absorption between 535 and 540 nm. The detection limit ranges between 0.1 and 0.3 mg dicyanidiamide-N/100 g soil. In soil extracts neither naturally occurring substances nor metabolites of dicyandiamide influenced this colour reaction. After addition of 1, 5, 10, 20 mg dicyandiamide-N to 100 g soil and immediate extraction by water an average recovery rate of 95% was found. The relative standard deviation amounted to ± 1.60%.     

Development and validation of a high-performance liquid chromatography method for the determination of diacetyl in beer using 4-nitro-o-phenylenediamine as the derivatization reagent

Diacetyl is a natural byproduct of fermentation and known to be an important flavor compound in many food products. Because of the potential undesirable effects of diacetyl on health safety and beer flavor, determination of its concentration in beer samples is essential and its analytical methods have attracted close attention recently. The aim of the present work is to develop and validate a novel high-performance liquid chromatography method for the quantification of diacetyl in beer based on the derivatization reaction of diacetyl with 4-nitro-o-phenylenediamine (NPDA). After the derivatization with NPDA in pH 3.0 at 45 °C for 20 min, diacetyl was separated on a kromasil C(18) column at room temperature in the form of the resulting 6-nitro-2,3-dimethylquinoxaline and detected by the ultraviolet detector at 257 nm. The results showed that the correlation coefficient for the method was 0.9992 in the range of 0.0050-10.0 mg L(-1) and the limit of detection was 0.0008 mg L(-1) at a signal-to-noise ratio of 3. The applicability of the proposed method was evaluated in the analysis of beer samples with the recovery range of 94.0-99.0% and relative standard deviation range of 1.20-3.10%. The concentration levels of diacetyl detected in beer samples from 12 brands ranged from 0.034 to 0.110 mg L(-1). The proposed method showed efficient chromatographic separation, excellent linearity, and good repeatability that can be applied to quantification of diacetyl in beer samples.     

Determination of total sulfite in shrimp, potatoes, dried pineapple, and white wine by flow injection analysis: collaborative study

A method for the determination of total sulfite in shrimp, potatoes, dried pineapple, and white wine by flow injection analysis (FIA) was collaboratively studied by 8 laboratories. In the method, the sample solution is reacted with sodium hydroxide to liberate aldehyde-bound sulfite. The sample stream is acidified to produce SO2 gas, which diffuses across a Teflon membrane in the gas diffusion cell into a flowing stream of malachite green. The degree of discoloration of the malachite green is proportional to the amount of sulfite in the sample solution. Red wine was included in the study but interlaboratory precision for these samples was not satisfactory and correlation with Monier-Williams results was poor. The present method is not recommended for use with these samples. For shrimp, potatoes, dried pineapple, and white wine, average reproducibility (RSDR) of results was 25% for samples at 10 ppm SO2 and 10% for samples at greater than 50 ppm. Overall average reproducibility was 14%. Recoveries of sulfite added to samples averaged 80%. Comparison of FIA with the Monier-Williams method indicated comparable results by the 2 methods. The FIA method has been adopted official first action for determination of greater than or equal to 5 ppm total sulfite in shrimp, potatoes, dried pineapple, and white wine.     

Polarographic determination and aqueous potentiometric titration of cimetidine in tablets

A method is described which uses the direct current (dc) polarographic behavior of cimetidine in a strong acid solution to determine this compound. The diffusional characteristics of the reduction wave of cimetidine in 1M HCl (about -0.8 V vs SCE) are shown, and their analytical usefulness was studied. This polarographic method was used to determine cimetidine in standard solutions ranging from 4 to 80 micrograms/mL with a coefficient of variation of 1.3%, and was further applied to the determination of cimetidine in tablets. The results obtained by the dc polarographic method agree with those obtained by an aqueous potentiometric titration of cimetidine with HClO4 and estimation of the end point by the Gran graphic method.     

Comparison of the ion exclusion chromatographic method with the Monier-Williams method for determination of total sulfite in foods

Experimental data comparing the alkali extraction/ion exclusion chromatographic method with the Monier-Williams method for determination of total sulfite are presented in (a) enzymatic and nonenzymatic browning systems, (b) vegetables containing naturally occurring sulfite, and (c) a carbohydrate-type food additive, erythorbic acid. Excellent agreement, with a linear correlation coefficient of 0.99, was observed in fresh potato samples homogenized with sulfite and allowed to react for different time intervals (enzymatic browning system). A good overall correlation was observed in dehydrated, sulfited apple samples heated for different times (nonenzymatic browning system); however, as heating time increased, higher results were obtained by the Monier-Williams method than by the alkali extraction/ion exclusion chromatographic method. The results of determining sulfite in the alkali trapping solution following acid distillation or acid treatment without heat suggested that this deviation was due to a fraction of sulfite bound to the browning reaction products in such a way that it was released by acid distillation but not by alkali extraction or acid treatment without heat. Similar behavior was demonstrated in cabbage with naturally occurring sulfite, which was released by acid distillation but not by alkali extraction or acid treatment without heat. The ion exclusion chromatographic method could overcome interference by the volatile caramelization reaction products in the Monier-Williams determination of erythorbic acid.     

Determination of sulfite in foods and beverages by ion exclusion chromatography with electrochemical detection: collaborative study

A liquid chromatographic (LC) method for determination of total sulfite in foods and beverages by alkali extraction followed by ion exclusion chromatographic separation and electrochemical detection (IEC-EC) was collaboratively studied by 9 laboratories. Blind duplicate samples of starch, diluted lemon juice, wine cooler, dehydrated seafood, and instant mashed potatoes were analyzed without spiking and with added sulfite at 2 levels. The initial sulfite levels varied from 0 to 384 ppm SO2, and the levels added varied from 10 to 400 ppm. The initial sulfite levels determined by the IEC-EC method and the Monier-Williams method were in good agreement. Recovery of added sulfite by the IEC-EC method was generally higher than that by the Monier-Williams method. Within-laboratory repeatability (RSDr) for the IEC-EC method varied from 4.4 to 26.0%, and overall reproducibility (RSDR) varied from 8.5 to 39.3%. The collaborators found the method to be fast, sensitive, and easy to use, which makes it a useful alternative to the Monier-Williams method. The method has been adopted official first action.     

Liquid chromatographic determination of sulfite in grapes and selected grape products

A liquid chromatographic (LC) method is described for the determination of sulfite in grapes and certain grape products. Sulfite is extracted from grapes with aqueous formaldehyde solution buffered at pH 5; free sulfite is converted to hydroxymethylsulfonate (HMS), which is extremely stable at pH 3-7. Subsequent heating to 80 degrees C for 30 min converts reversibly bound forms of sulfite to HMS. The extract is then analyzed by reverse-phase ion-pairing liquid chromatography, using a C18 column and a mobile phase of aqueous 0.005 M tetrabutylammonium ion in 0.05 M acetate, pH 4.7, and a flow rate of 1 mL/min. Aqueous KOH is added to the eluate to convert HMS to free sulfite, which is then treated with 5,5'-dithiobis[2-nitrobenzoic acid]. This reaction produces the 3-carboxy-4-nitrothiophenolate anion, which is determined by measurement of electronic absorption at 450 nm. For grapes spiked with HMS at 5-20 ppm (as SO2), recoveries ranged from 92 to 112%, with a coefficient of variation of 4.6%. The method was also used to determine sulfite in various grape products. Results were comparable to those obtained by the AOAC official Monier-Williams method.     

Isolation and determination of alpha-dicarbonyl compounds by RP-HPLC-DAD in green and roasted coffee

Glyoxal, methylglyoxal, and diacetyl formed as Maillard reaction products in heat-treated food were determined in coffee extracts (coffee brews) obtained from green beans and beans with different degrees of roast. The compounds have been reported to be mutagenic in vitro and genotoxic in experimental animals in a number of papers. More recently, alpha-dicarbonyl compounds have been implicated in the glycation process. Our data show that small amounts of glyoxal and methylglyoxal occur naturally in green coffee beans. Their concentrations increase in the early phases of the roasting process and then decline. Conversely, diacetyl is not found in green beans and forms later in the roasting process. Therefore, light and medium roasted coffees had the highest glyoxal and methylglyoxal content, whereas dark roasted coffee contained smaller amounts of glyoxal, methylglyoxal, and diacetyl. For the determination of coffee alpha-dicarbonyl compounds, a reversed-phase high performance liquid chromatography with a diode array detector (RP-HPLC-DAD) method was devised that involved the elimination of interfering compounds, such as chlorogenic acids, by solid phase extraction (SPE) and their derivatization with 1,2-diaminobenzene to give quinoxaline derivatives. Checks of SPE and derivatization conditions to verify recovery and yield, respectively, resulted in rates of 100%. The results of the validation procedure showed that the proposed method is selective, precise, accurate, and sensitive.     

Indirect spectrophotometric method for determining epicillin

A new UV spectrophotometric assay for determination of epicillin in capsules and plasma is reported. The method is based on the absorptivity of a degradation product obtained from the acidic hydrolysis of the antibiotic. The isolation, identification, individual capsule assays, composite assay, and recovery studies are described. Also, the proposed method is compared with a dc polarographic assay in plasma.     

Determination of sulfites in foods by simultaneous nitrogen purging and differential pulse polarography

An improved technique has been developed for determination of sulfites in food by differential pulse polarography. A Teflon sleeve is fitted to the dropping mercury electrode capillary so that SO2 is purged from the sample and simultaneously detected at peak potential. Bound sulfite in the sample is released at room temperature by addition of base in the absence of oxygen. For some foods, the prepared sample was passed through a Sep-Pak C-18 cartridge to remove naturally occurring sulfur compounds so that only added sulfite is measured. The level of detection was approximately 1 microgram SO2/g. Results agreed with those obtained by the optimized Monier-Williams method for a variety of foods.     

Comparison of three liquid chromatographic methods with FDA optimized Monier-Williams method for determination of total sulfite in foods

Three liquid chromatographic (LC) methods employing amperometric detection were compared with the collaboratively studied FDA optimized Monier-Williams distillation method for the determination of total sulfite in 5 food types. The foods included lemon juice, white wine, instant mashed potatoes, golden raisins, and onion flakes. Two of the LC methods (one employing headspace sampling and the other direct injection) used ion-exchange chromatography with a basic mobile phase (pH about 10.8) and a glassy carbon electrode; the third (employing direct injection) used ion-exclusion chromatography with an acidic mobile phase (pH about 2) and a platinum electrode. All 4 methods produced similar results for the wine, lemon juice, and raisins. Results were different for instant mashed potatoes and onion flakes. The headspace-LC method and direct ion-exclusion LC method, both of which employed an alkaline sample extraction, yielded significantly higher values for sulfite in instant potatoes than did the other 2 methods. A large interfering peak with both direct LC methods prevented quantitation of sulfite in the onion flakes. All methods can detect sulfite as low as about 1 microgram/g in 4 of 5 food types examined.     

Simple determination of ranitidine in dosage forms by in-phase selective AC polarography

A new AC polarographic method for the determination of pharmaceutical forms of ranitidine is proposed, based on the electroactivity of the ranitidine nitro group. Individual and composite assays as well as recovery studies are described. Results show adequate precision and accuracy. Sample preparation is easy and no excipient separation is required.     

DC polarography of cephradine and its application to capsules.

A polarographic method has been developed for the quantitative analysis of cephradine and its dosage forms. Direct determinations on capsules are carried out; excipients and coloring matter do not interfere in the determination. The electroactive product is formed by acidic hydrolysis with 5.0N HCl and heating at 80 degrees C for 60 min. Two polarographic waves are obtained: I = -0.46 V and II = -0.78 v vs. SCE. Both reduction waves are diffusion controlled. Wave I is preferred for analytical purposes. The precise chemical identity of the electroactive product has not been determined, but UV spectral data and the TLC Rf value are reported. A linear relation is established for levels of cephradine between 10(-2) and 10(-5)M in 5.0N HCl.     

Determination of sulfur dioxide in grapes: comparison of the Monier-Williams method and two ion exclusion chromatographic methods

Results for determination of sulfur dioxide in grapes were compared by 3 methods: the modified Monier-Williams method, acid distillation/ion exclusion chromatography with electrochemical detection (AD/IEC-EC), and alkali extraction/ion exclusion chromatography with electrochemical detection (AE/IEC-EC). An unusual positive response was observed during the later stage of the Monier-Williams distillation of both control grapes and sulfited grapes. Development of volatile acidic compounds in parallel with this Monier-Williams response and darkening of sample was also observed by collection in an alkali trap and analysis using anion exclusion chromatography and photodiode array detection. No parallel increase in sulfite was observed by the more selective AD/IEC-EC method, which clearly demonstrated that the response observed during the later stage of the Monier-Williams method is a false positive, probably due to caramelization reaction products. Monier-Williams results for grapes containing ca 10 ppm sulfite were in reasonably good agreement with those by either the AD/IEC-EC or AE/IEC-EC methods, presumably because the false positive response in the Monier-Williams analysis compensated for the somewhat incomplete recovery of sulfite. The AE/IEC-EC method is recommended because it is rapid, sensitive, straightforward, and free from interference. Accurate results by Monier-Williams analysis could be obtained by limiting distillation to 60 min and correcting for recovery.     

Accurate determination of oosporein in fungal culture broth by differential pulse polarography

A simple and accurate differential pulse polarographic method has been developed for the determination of oosporein in the culture broth of the fungus Beauveria brongniartii. This hydroxybenzoquinone derivative is the only major secondary metabolite secreted by this entomopathogenic fungus, which is used as biological pest control agent (BCA) against Melolontha melolontha larvae. It can be found in the host organism as well as in the formulated product. The polarographic behavior of oosporein was examined in various buffer systems over the pH range 3-10. In Britton-Robinson buffer/methanol solution (3:7 v/v, pH 5.5) the differential pulse polarograms exhibited reproducible peaks at E(p) = -0.18 V vs silver/silver chloride/potassium chloride (3 M). Under these conditions, a plot of peak height vs concentration of oosporein was found to be linear over the range 5.9 x 10(-)(7) to 2.5 x 10(-)(5) M (0.18-7.74 microg mL(-)(1); r = 0.9998). The detection limit was calculated to be 54 ng mL(-)(1). To evaluate the concentration of oosporein, the standard addition method was applied. The analysis of oosporein in the culture broth led to a mean value of 524.9 microg mL(-)(1) broth with a relative standard deviation (S(rel)) of +/-2.6%. The proposed polarographic method is accurate, not time-consuming, and it is of low cost because no separation steps are necessary.     

Hydroxymethanesulphinate salts and related decomposition products in wastewater

Hydroxymethanesulphinate (HMS) and its decomposition products such as HCHO, Zn and sulphites can be determined quantitatively in each other's presence by a polarographic method. In the alkaline medium it is possible to have well defined and separated waves relative to the oxidation of HMS ion and to the reduction of HCHO and zincate ion. The quantitative determination of these compounds is carried out with standard addition methods since the concentration-current relationship is linear. The SO₂ is determined in HClO₄ 0.1 M and in the same sample it is possible to determine even HMS, HCHO and Zn after addition of NaOH up to 0.1 M. Moreover, a method of indirect determination of HMS is herein described. This is based on the determination of HCHO released by means of a weak oxidation of HMS which is stoichiometrically proportional to the total HMS. The method is sensitive and is made specific for such types of wastewater which come from textile industries.