带锚FRP受剪加固梁非剥离破坏模式BP网络预测

对带可靠锚固FRP受剪加固混凝土梁的非剥离剪切破坏模式做了细化分类,即包括FRP断裂控制的破坏、受压区混凝土（达到极限应力状态）压碎控制的破坏、FRP断裂与混凝土压碎同步发生的界限破坏等3种模式;利用BP神经网络建立了带锚纤维受剪加固梁破坏模式的智能预测模型,与31根非剥离破坏加固梁试验的对比结果显示：模型总体精度达到90%,说明建立的破坏模式网络预测模型适用于带锚纤维受剪加固梁非剥离剪切破坏模式的判别。     

冻融损伤喷射混凝土本构关系及微观结构

采用棱柱体试件,通过快速冻融试验方法,对冻融损伤后同配合比普通混凝土、喷射混凝土及钢纤维喷射混凝土单轴受压应力应变全曲线进行研究。对应力应变关系中相关参数进行回归分析,得出冻融循环后试件应力应变全曲线方程。结果表明：随着冻融循环次数增加,受压应力应变曲线趋于扁平;峰值应力降低,峰值应变增大,分别与冻融循环次数呈线性和指数变化。与普通混凝土相比,喷射混凝土峰值应力下降速率小,而钢纤维喷射混凝土的下降速率进一步减小。而后,采用扫描电子显微镜及压汞法,对损伤后试件微观结构和孔结构进行观察分析,发现随着冻融循环次数增加,在渗透压和冻胀压力综合作用下,试件内部微裂纹及气孔增多,孔径增大,试件密实度显著降低;而钢纤维喷射混凝土中仅出现少量连通毛细孔,这与宏观力学性能变化呈现一致性。     

钢筋混凝土无腹筋细长梁剪切破坏机理模型研究综述

根据现有关于钢筋混凝土无腹筋细长梁剪切破坏机理问题的研究成果,介绍了基于修正压力场理论的抗剪模型、临界剪切裂缝理论、塑性理论、压力路径理论、劈裂破坏理论和基于截面应变分析的抗剪模型的基本假设、核心观点及受剪承载力计算方法,并给出总结、归纳及评析;另一方面,利用相关试验数据和ACI-DAfStb无腹筋细长梁剪切破坏数据库,分别对不同理论模型的受剪承载力计算公式进行了设计参数的影响评估和统计评估;并展望了无腹筋细长梁剪切破坏机理研究的发展方向。研究结果表明：不同理论模型的部分假设缺少直接的试验依据支持,梁腹混凝土的受拉（劈裂）或受剪（骨料咬合）以及受压区混凝土对抵抗剪力的贡献成为抗剪机制的主要分歧;不同受剪承载力计算公式对不同影响因素的考虑方式的合理性和计算结果的准确度均有待进一步提高。后续深入研究应综合考虑剪切破坏问题的随机性和物理属性,利用先进测试技术、应力演化分析方法,进一步揭示剪切破坏机理。     

改性竹筋混凝土受弯构件力学性能试验研究

针对竹筋混凝土结构存在的问题,提出了多种对竹筋的改性方法。在此基础上,对12根采用不同配筋和不同改性方法的受弯构件(11根竹筋混凝土梁和1根钢筋混凝土梁)进行了试验研究,分析了不同改性方法和不同配筋率竹筋混凝土受弯构件的力学性能、破坏形态及其影响因素。研究结果表明：竹筋能有效提高混凝土受弯构件的承载能力;经过适当方法改性后的竹筋能确保竹筋和混凝土之间的有效粘结,其正截面强度计算可以采用平截面假定;竹筋混凝土受弯构件的破坏均为脆性破坏,其破坏形态与其截面配筋率有关。     

高速铁路隧道基底软岩动力累积损伤特性

利用相似材料模拟高速铁路隧道基底软岩,采用荷载控制和非对称正弦波循环加载方式对软岩试件进行动三轴疲劳与损伤检测综合试验。通过试验结果分析,建立了软岩3参数多项式疲劳寿命计算模型和4参数多项式累积损伤参量计算模型,获得了软岩疲劳损伤特性,即：软岩疲劳破坏表现为端部拉-剪复合破坏和中部压-剪复合破坏两种模式;疲劳破坏全过程表现为初始微孔隙压密、裂纹发生与稳定扩展以及损伤裂纹加速发展3个发展阶段;软岩疲劳寿命主要取决于本身强度和动应力水平,强度愈高、动力应力水平愈低,其疲劳寿命就越长;当动应力水平相同时,软岩疲劳寿命与其弹性模量呈线性增长关系。     

页岩烧结保温砌块砌体基本力学性能试验研究

通过对页岩烧结保温砌块砌体轴心抗压、沿通缝抗剪、剪压复合抗剪性能试验研究,分析其破坏特征和破坏机理。试验结果表明:页岩烧结保温砌块砌体受压破坏时,在竖向灰缝附近形成主裂缝,接近极限荷载时砌体出现表皮剥落现象;沿通缝抗剪破坏模式主要为单剪破坏,脆性明显;剪压破坏有剪磨、剪压和斜压3种类型;实测轴心抗压强度平均值高于规范值,沿通缝抗剪强度、复合抗剪强度平均值低于计算值,并分别给出砌体轴心抗压强度平均值、抗剪、剪压复合受力抗剪强度平均值建议公式;剪压复合抗剪强度随着压应力的增大而增大;建立了页岩烧结保温砌块砌体受压应力应变关系表达式;给出该类砌块的弹性模量和泊松比的建议值。     

混凝土拉压强度尺寸效应的细观非均质机理

为了从材料细观非均质角度揭示混凝土强度尺寸效应机理,建立了混凝土细观单元等效非均质力学模型,开展了立方体抗拉、抗压强度尺寸效应细观数值模拟研究。研究结果表明：混凝土强度尺寸效应根源于材料细观非均质性,随着模型尺寸的增加,混凝土材料细观单元弹性模量变异系数增大,材料细观非均质性增强,大尺寸模型内部存在更多的低强度单元或缺陷,导致混凝土立方体抗拉、抗压强度降低,极限应变减小,脆性增大;混凝土损伤破坏由少量集中区域,发散扩展形成多条非贯通的裂纹带;数值模拟结果与尺寸效应实验数据相吻合。     

索承式桥梁吊索钢丝腐蚀疲劳寿命评估

根据吊索镀锌钢丝腐蚀疲劳破坏特点,把镀锌钢丝腐蚀疲劳纹形成和扩展过程分解成镀锌层腐蚀失效、蚀坑萌生、蚀坑形成、短裂纹扩展、长裂纹扩展和断裂破坏等阶段,建立各阶段时间表达式,得到镀锌钢丝疲劳寿命表达式,提出基于断裂力学的吊索钢丝腐蚀疲劳寿命评估研究结果方法。通过算例分析复杂运营条件下腐蚀环境和应力幅等因素对吊索钢丝腐蚀疲劳寿命的影响,研究结果表明：吊索钢丝腐蚀疲劳寿命主要由钢丝镀锌层腐蚀、蚀坑发展和短裂纹扩展等3个阶段组成,为了准确地评估吊索腐蚀疲劳寿命,需要掌握大桥的运营环境和交通荷载。     

各向异性砂土剪切带角度的理论分析

针对平面应变条件下各向异性砂土剪切带角度的试验规律,采用传统的3种理论和分叉理论进行对比分析。将平面应变条件下剪切带角度的试验结果按照传统3种理论整理发现,尽管传统3种理论可以估算同种砂剪切带角度的极小、中间和极大值,但无法解释其各向异性规律。砂土在平面应变条件下破坏时会产生明显的剪切带,当剪切带方向和砂土沉积面方向接近时,会较早诱发剪切带的产生,使材料强度降低,造成了平面应变条件下各向异性强度规律明显不同于常规三轴条件下的试验规律,采用分叉理论结合各向异性模型则可以有效解释这个规律。随砂土沉积面角度的变化,模型可以从细观角度解释常规三轴条件下剪切带角度的单调变化的试验规律,结合分叉理论可以描述平面应变条件下其先减小然后增大的规律。通过几种理论对比分析表明,模型结合分叉理论不但能够描述多种应力状态下的平面应变和常规三轴应力条件下剪切带角度表现的不同规律,而且能够从细观角度解释其各向异性成因。     

稻谷吸湿裂纹生成与扩展的机理分析

当前对KUNZE湿应力模式的分析有两种模式：一种是基于最大拉应力与裂纹形成的高度相关性,一种则是从吸湿裂纹敏感性与谷粒中存在的微裂纹大小的相关性考虑,两种机制各有适用之处。研究了两种裂纹生成机制随吸湿时间的变化规律,并分析了不同热力学条件下垩白对裂纹生成与扩展的影响,结果表明：稻谷吸湿过程的前期,拉应力机制处于主导裂纹生成的地位,吸湿后期,微裂纹机制处于主导地位,两者间存在一个过渡阶段,在过渡阶段,所有影响因素的作用均会被削弱。     

Location of a high-lysine gene and the DDT-resistance gene on barley chromosome 7

Summary The high-lysine gene in Risø mutant 1508 conditions an increased lysine content in the endosperm via a changed protein composition, a decreased seed size, and several other characters of the seed. The designation lys3a, lys3b, and lys3c, is proposed for the allelic high-lysine genes in three Risø mutants, nos 1508, 18, and 19. Linkage studies with translocations locate the lys3 locus in the centromere region of chromosome 7. A linkage study involving the loci lys3 and ddt (resistance to DDT) together with the marker loci fs (fragile stem), s (short rachilla hairs), and r (smooth awn) show that the order of the five loci on chromosome 7 from the long to the short chromosome arm is r, s, fs, lys3, ddt. The distance from locus r to locus ddt is about 100 centimorgans.     

Biological Activity and Quantification of Suspected Allelochemicals from Alfalfa Plant Parts

Autotoxicity restricts reseeding of alfalfa (Medicago sativa L.) after alfalfa until autotoxic chemical(s) breaks down or is dispersed into external environments. A series of aqueous extracts from leaves, stems, roots and seeds of alfalfa ‘Vernal’ were bioassayed against alfalfa seedlings of the same cultivar to determine their autotoxicity. The highest inhibition was found in the extracts from the leaves. Extracts at 40 g dry tissue l^?1 from alfalfa leaves were 15.4, 17.5 and 28.7 times more toxic to alfalfa root growth than were those from roots, stems and seeds, respectively. A high‐performance liquid chromatography (HPLC) analysis with nine standard compounds showed that the concentrations and compositions of allelopathic compounds depended on the plant parts. In leaf extracts that showed the most inhibitory effect on root growth, the highest amounts of allelochemicals were detected. Among nine phenolic compounds assayed for their phytotoxicity on root growth of alfalfa, coumarin, trans‐cinnamic acid and o‐coumaric acid at 10^?3 m were most inhibitory. The type and amount of causative allelochemicals found in alfalfa plant parts were highly correlated with the results of the bioassay, indicating that the autotoxic effects of alfalfa plant parts significantly differed.     

Simultaneous Determination of Four Phenolic Acids in Radix Salviae Miltiorrhizae Formula Granules by QAMS

[Objectives]This study aimed to establish a QAMS(quantitative analysis of multi-components by single-marker)method for simultaneous determination of four phenol...     

Changes in Seed Yield and Quality with Maturity in Onion (Allium cepa L., cv. 'Early Cream Gold')

Development of onion (Allium cepa L., cv. ‘Early Cream Gold’) seed under cool climate conditions in Tasmania, Australia occurred over a longer duration than previously reported, but similar patterns of change in yield components were recorded. In contrast to previous studies, umbel moisture content declined from 85 to 67 % over 57 days while seed moisture content decreased from 85 to 31 %. Seed yield continued to increase over the duration of crop development, with increasing seed weight compensating for seed loss resulting from capsule dehiscence in the later stages of maturation. Germination percentage was high and did not vary significantly from 53 to 77 days after full bloom (DAF), but mean germination time declined and uniformity of germination increased significantly over the same time period. The percentage abnormal seedlings declined with later harvest date, resulting in highest seed quality at 77 DAF. The results of this study suggest that the decision to harvest cool climate onion seed crops before capsule dehiscence will result in a loss of potential seed yield and quality.     

Water Extraction Process of Chinese Herbal Compound Man Gan Ning

[Objectives]To optimize the water extraction process of Chinese Herbal Compound Man Gan Ning and establish a method for its extraction and content determination...     

Present status and future strategy in breeding faba beans (Vicia Faba L.) for resistance to biotic and abiotic stresses

Progress is being made, mainly by ICARDA but also elsewhere, in breeding for resistance to Botrytis, AScochyta, Uromyces, and Orobanche; and some lines have resistance to more than one pathogen. The strategy is to extend multiple resistance but also to seek new and durable forms of resistance. Internationally coordinated programs are needed to maintain the momentum of this work.Tolerance of abiotic stresses leads to types suited to dry or cold environments rather than broad adaptability, but in this cross-pollinated species, the more hybrid vigor expressed by a cultivar, the more it is likely to tolerate various stresses.     

Pollen and pollination experiments. III. The viability of apple and pear pollen as affected by irradiation and storage

Summary Apple and pear pollen was irradiated with doses of 0, 50, 100, 250 and 500 krad (gamma rays) and stored at 4°C and 0–10% r.h. From the in-vitro germination percentages an average LD 50 dose of about 220 krad was estimated. For both irradiated and untreated pollen a close and corresponding lineair relationship existed between germination percentage and pollen tube growth.Irradiated pollen was much more sensitive to dry storage conditions than untreated pollen, resulting in less germination and more bursting. Apparently, irradiation caused the pollen cell membrane to lose its flexibility faster than normal. Rehydration of dry-stored, irradiated pollen in water-saturated air restored germination percentages up to their initial levels. The importance of this procedure in germination trials is stressed.     

Optimization of Extraction Technology and Determination of Content of Total Phenols of Leaves in Acanthopanax giraldii Harms

[Objectives] To determine the optimum extraction technology for total phenols of leaves in Acanthopanax giraldii Harms.[Methods]The single factor test and ortho...     

Cytoplasmic male sterility,resistance to gall mite and mildew,and season of leafing out in black currants

Summary Cytoplasmic male sterility (cms) is described in the F₁ hybrids Ribes × carrierei (R. glutinosum albidum × R. nigrum) and R. sanguineum × R. nigrum. In backcrosses to R. nigrum, progenies with R. glutinosum cytoplasm were either all male sterile, or segregated for full male fertility (F) and complete (S) and partial (I) male sterility. Ratios of F:I+S suggested that two linked genes controlled cms, F plants being dominant for one (Rf ₁) and recessive for the other (Rf ₂).Segregation for cms in relation to three linded genes, Ce (resistance to the gall mite, Cecidophyopsis ribes), Sph ₃(resistance to American gooseberry mildew, Sphaerotheca mors-uvae) and Lf ₁(one of two dominant additive genes controlling early season leafing out) indicated that Rf ₁and Rf ₂were in this linkage group. The gene order and approximate crossover values appeared to be: % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqef0uAJj3BZ9Mz0bYu% H52CGmvzYLMzaerbd9wDYLwzYbItLDharqqr1ngBPrgifHhDYfgasa% acOqpw0xe9v8qqaqFD0xXdHaVhbbf9v8qqaqFr0xc9pk0xbba9q8Wq% Ffea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8frFve9Fve9Ff0dme% aabaqaciGacaGaamqadaabaeaafaaakeaacaWGdbGaamyzamaamaaa% baGaaiiiaiaacccacaGGWaGaaiOlaiaacgdacaGG0aGaaiiiaiaacc% caaaGaaiiiaiaacccacaGGGaGaamOuaiaadAgaliaaigdakmaamaaa% baGaaiiiaiaacccacaGGGaGaaiiiaiaaccdacaGGUaGaaiOmaiaacs% dacaGGGaGaaiiiaiaacccacaGGGaGaaiiiaaaacaWGsbGaamOzaSGa% aGOmaOWaaWaaaeaacaGGGaGaaiiiaiaacccacaGGGaGaaiiiaiaacc% cacaGGGaGaaiiiaiaacccaaaGaamitaiaadAgaliaaigdakmaamaaa% baGaaiiiaiaacccacaGGGaGaaiiiaiaacccacaGGGaGaaiiiaiaacc% cacaGGGaGaaiiiaiaacccacaGGGaaaaiaadofacaWGWbGaamiAaSGa% aG4maaaa!6E4D!\[Ce\underline { 0.14 } Rf1\underline { 0.24 } Rf2\underline { } Lf1\underline { } Sph3\]. Crossover values of 0.36 for Ce-Lf ₁, and 0.15 for Lf ₁-Sph ₃were estimated from the relative mean differences in season of leafing out between seedlings dominant and recessive for Ce and Sph ₃.It is suggested that competitive disadvantage of lf ₁-carrying gametes and/or zygotes at low temperatures may be implicated in the almost invariable deficit of plants dominant for the closely linked mildew resistance allele Sph ₃. Poor performance of lf ₁- (and possibly lf ₂-) carrying gametes and young zygotes during periods of low temperature at flowering might also account for the liability of some late season cultivars and selections to premature fruit drop (running off).     

Screening techniques and sources of resistance to parasitic angiosperms

Parasitic angiosperms cause great losses in many important crops under different climatic conditions and soil types. The most widespread and important parasitic angiosperms belong to the genera Orobanche, Striga, and Cuscuta. The most important economical hosts belong to the Poaceae, Asteraceae, Solanaceae, Cucurbitaceae, and Fabaceae. Although some resistant cultivars have been identified in several crops, great gaps exist in our knowledge of the parasites and the genetic basis of the resistance, as well as the availability of in vitro screening techniques. Screening techniques are based on reactions of the host root or foliage. In vitro or greenhouse screening methods based on the reaction of root and/or foliar tissues are usually superior to field screenings and can be used with many species. To utilize them in plant breeding, it is necessary to demonstrate a strong correlation between in vitro and field data. The correlation should be calculated for every environment in which selection is practiced. Using biochemical analysis as a screening technique has had limited success. The reason seems to be the complex host-parasite interactions which lead to germination, rhizotropism, infection, and growth of the parasite. Germination results from chemicals produced by the host. Resistance is only available in a small group of crops. Resistance has been found in cultivated, primitive and wild forms, depending on the specific host-parasite system. An additional problem is the existence of pathotypes in the parasites. Inheritance of host resistance is usually polygenic and its transfer is slow and tedious. Molecular techniques have yet to be used to locate resistance to parasitic angiosperms. While intensifying the search for genes that control resistance to specific parasitic angiosperms, the best strategy to screen for resistance is to improve the already existing in vitro or greenhouse screening techniques.