表型可塑性对木本植物树冠结构与发育的影响

作为一组固生生物 ,树木具备一种独特的生存能力来适应在漫长生长过程中发生的环境变化。正是因为这样的原因 ,树木的许多生物学特性 ,如分枝习性与树冠结构 ,代表了树木的生长“蓝图”或基因型与其生长环境及历史的互作关系。遗传因子通过突变 ,染色体重组、基因重复 ,易位与互换等过程形成树木发育成固定的结构。早期形态学家已认识到 ,树木存着大量的形态与发育方面的重复 ,利用这些重复的分化 ,许多热带树种可以被划分成少数几组形态。类似的工作已用在温带树木的结构分析上。但是 ,尽管发展这样的一个分类机制是很容易的 ,然而实际的应用却非常困难 ,这是因为在相同的树木类别内 ,甚至在相同树种内 ,存在着巨大的表型分化。不同的环境或发育过程会使具有相同基因型的树木产生不同的结构 ,由此可见其影响和遗传影响同样复杂环境对树木结构的影响称为表型可塑性。通过缓解自然选择的效应 ,表型可塑性对提高植物适应能力具有重要作用。如果表型可塑性存在遗传变异 ,那么 ,具有不同可塑性的群体会产生进化。表型可塑性亦可用于分析由环境引起的性状相关 ,例如环境能导致性状相关在方向与大小上的变化。基因型与环境互作的结果导致有机体的发育以外遗传的系统的改变 ,产生所谓的异时性生长 (heterochron     

马尾松高产脂种子园家系选择

以马尾松（Pinus rnassoniana）高产脂种子园自由授粉家系子代测定林为对象,分析了4年生家系生长性状（树高、胸径、材积和活轮枝数）及抗虫性的遗传变异规律,估算了各性状的遗传力,并进行了相关性分析。结果表明,除抗虫性存在显著差异外,材积、胸径、树高、活轮枝数生长性状在家系问均存在极显著的遗传差异;生长性状受较强遗传力控制,而抗虫性受中强度遗传力控制;家系各生长性状问具有高度相关性,而产脂力、抗虫性和各生长性状间没有相关性。利用最佳线性预测的单性状（材积）及多性状联合（抗虫性和家系产脂力）估算家系育种值,选出了2个马尾松优良家系作为桂东南育种和推广材料。     

马尾松实生种子园自由授粉子代测定及亲本家系选择增益估算

以福建省白砂国有林场的马尾松实生种子园自由授粉子代测定林为材料,分析了5、6年生家系生长量(树高、胸径及材积)及形质指标(通直度、冠幅及侧枝粗度)的遗传变异规律,估算了各性状的遗传力。结果表明,材积、胸径、树高生长性状及冠幅、通直度、侧枝粗度等形质指标在家系间和家系内均存在显著的遗传差异,且家系内变异大于家系间。家系、单株遗传力分别在0.493 0.731、0.080 0.199之间。利用最佳线性预测的单性状(材积)及多性状联合(材积、冠幅、侧枝粗度及通直度)估算了6年生家系育种值。分析了材积单性状选择方式、多形状联合选择以及冠幅约束选择在不同入选率下亲本家系的预测及现实遗传增益(材积及通直度)的变化规律,结果表明,在等权重条件下,联合材积及通直度指标进行亲本家系选择是最佳选择方式,能够获得相对较高的遗传增益。     

5年生南方红豆杉生长和分枝性状家系变异与选择

[目的]对5年生南方红豆杉优树家系进行全林测定,以揭示其生长和分枝性状家系遗传变异规律,为不同区域和立地筛选出速生优质和遗传稳定的家系。[方法]利用2014年设置在浙江淳安、江西分宜和福建明溪3个地点的5年生南方红豆杉优树家系测定林,分析其家系遗传变异规律及家系与地点的互作,初选出一批速生优质家系。浙江淳安、江西分宜和福建明溪3个地点参试的家系数分别为55、39和32个,浙江淳安和江西分宜、浙江淳安和福建明溪及江西分宜和福建明溪的共有家系数分别为38、14和12个,3个试验点的共有家系为11个。[结果]5年生南方红豆杉生长和分枝性状在家系间的差异均达到极显著水平,树高和一级分枝数这2个性状的家系X地点互作效应明显,其它性状的家系与立地互作效应则较小。南方红豆杉家系各生长性状间,以及生长性状与一级分枝数和最大分枝粗等均呈极显著的正相关。5年生南方红豆杉家系遗传力估算值总体较高,与家系遗传力比较,其单株遗传力估算值稍低。以树高为选择标准并兼顾分枝性状,在3个试验点共初选出10个优良家系。[结论]5年生南方红豆杉家系间,各生长与分枝性状具有丰富的遗传差异,南方红豆杉家系遗传力普遍较高,受较强遗传控制。树高和地径生长突出的家系,分枝多且粗、枝叶茂密、冠幅宽。树高和一级分枝数是两个对立地条件较敏感的性状,其家系X地点互作效应极显著,立地对其影响较大,其中,SY10家系在多个地点皆表现较好且稳定。     

马尾松无性系种子园半同胞子代变异分析和家系选择

以福建省漳平五一林场马尾松无性系种子园自由授粉子代半同胞家系为研究对象,分析其树高、胸径、材积、冠幅、通直度、高径比、冠径比、木材基本密度、管胞长度和宽度、管胞长宽比等性状,发现家系间除管胞长宽比性状差异显著,其余性状均达差异极显著,暗示着马尾松种子园半同胞家系间存在较为丰富的变异,具选育潜力。8年生林分内各性状的家系遗传力以树高性状为最高(0·691),其次是木材基本密度(0·640)。各性状间的相关性分析结果表明,生长量性状的改良可间接改善通直度,且生长量性状与木材基本密度存在显著正相关关系,木材基本密度与管胞长度和宽度不相关。采用10%入选率,发现5年生林分和8年生林分入选家系一致,材积遗传增益分别达19·74%和19·23%,且5年生林分和8年生林分生长量性状的遗传相关极显著,认为马尾松制浆造纸材短轮伐期的初选年龄可确定为5年生;根据性状遗传力的相对大小和典型相关分析的结果,认为马尾松家系选择可适当注重树高生长量指标。以树高和材积为选择指标,按照10%入选率,兼顾材性和种子园内无性系的开花结实情况,筛选出制浆造纸材短轮伐期优良家系12个。     

湖北省马尾松优树半同胞子代测定研究

1991～1992年从湖北省马尾松主要分布区选出116株优良单株,1994年建立了相应的半同胞子代测定林。2011年对子代测定林生长性状、通直度、树皮厚度指数、弹性模量等进行了调查和分析。结果表明:树高、胸径、材积和弹性模量等4个性状在家系间都存在极显著的差异,也表明各优树之间存在广泛变异。树高、胸径和材积的家系遗传力分别为0.689、0.729和0.791,均大于单株遗传力,表明:各家系的主要生长性状受到较强的遗传控制,对参试家系进行选择,能取得比较理想的结果。弹性模量家系遗传力为0.507,属于中等程度的遗传,而树皮厚度指数这一指标家系遗传力较低。按照大于整体平均值加1倍标准差进行选择,树高、胸径、材积和弹性模量4个性状分别有14、14、15和14个家系入选,遗传增益分别为6.4%、11.1%、28.1%和6.6%。     

Juvenile genetic parameter estimates for vigour,stem form,branching habit and survival in three radiata pine (<Emphasis Type="Italic">Pinus radiata</Emphasis> D.Don) progeny tests in Galicia,NW Spain

Individual and family heritabilities, as well as phenotypic and genetic correlations were estimated 2 and 3 years after plantation, in progeny tests carried out in plantations of open-pollinated Pinus radiata D.Don progeny located at three different sites in Galicia (NW Spain). The following factors were considered: survival, growth (free growth, height, diameter, volume, height/diameter ratio), form (number of branches, number of whorls, number of branches per whorl, number of branches per tree height meter, number of ramicorn branches, diameter of the thickest branch, internode length, branch angle, stem straightness, stem sinuosity, number of forks) and resistance (frost and insect resistance). Each plantation contained 50 female parents that had been selected as plus trees in genetically unimproved plantations in Galicia, as well as 6 female parents selected from the radiata pine breeding programme in the Basque Country (northern Spain) and two commercial lots of seed from Galicia, as controls. Individual heritabilities varied from low to high levels for each trait studied. Family heritabilities followed similar trends for individual heritabilities, but were of much greater magnitude. The results suggested that all traits except the number of branches per whorl and insect resistance could be expected to respond to selection based on individual performance. The less heritable traits could be improved by progeny testing. Height and diameter were strongly and positively correlated, and both traits were also correlated with the number of branches, the number of whorls and the branch diameter. The results are compared with previously published data and discussed in relation to the implications for breeding activities.     

Inheritance of growth and survival in two 9-year-old,open-pollinated progenies of an advanced breeding population of Chinese firs in southeastern China

Tree growth traits (tree height, DBH and stem volume) and survival from two 9-year-old, open-pollinated progeny tests of Chinese fir were investigated for heritability, genotype × environment interaction, age-age genetic correlation and selection efficiency. The 97 and 79 families planted at two sites were collected from the third-cycle seed orchard. Individual heritability was estimated between 0.05 and 0.21 for tree height, DBH, and volume and between 0.45 and 1.0 for survival. Family heritability was between 0.20 and 1.14. Significant genotype × environment interaction was observed for the three growth traits. Type B genetic correlation was between 0.41 and 0.67 with an increasing trend as tree grows. High age-age genetic correlation was observed with correlation reaching 0.9 after age 4 for height, DBH, and volume. The genetic gains were estimated at 3.26, 3.39 and 5.98 % for tree height, DBH, and volume with 10 % selection intensity. The implication for advanced tree breeding in Chinese fir is discussed.     

大径材杂种落叶松优良家系选择

为选择适宜大径材培育的杂种落叶松优良家系,以40年生全同胞子代测定林31个家系为研究对象,对其生长性状、干形性状、遗传力及遗传增益进行了测定.结果 表明:生长性状单株遗传力整体高于干形性状,树高单株遗传力平均值超过0.5,胸径平均值超过0.4,中央直径平均值超过0.3,材积的平均值超过0.5.胸径和材积的相关系数为0....     

Variation analysis and fine family selection on half-sib progenies from clonal seed orchard of Pinus massoniana

Variation of traits that include height, diameter at breast height (DBH), stem volume, crown width, straightness, wood basic density, tracheid length and width of open-pollinated progenies from clonal seed orchard of Pinus massoniana was analyzed. Differences in traits such as growth, tree form and wood quality among families was significant, which indicated that the improvement potential was notable. Heritability of height and wood basic density reached 0.691 and 0.640, respectively. According to a correlation analysis between traits, stem straightness could be improved indirectly when growth traits are improved; growth traits were significantly correlated with wood basic density; and wood basic density was not significantly correlated with length and width of the tracheid. Under the selection ratio of 10%, genetic gains were 19.74% and 19.32% respectively, and selected families from the progeny test stands at the age of five years and eight years were the same. Genetic correlation of height, DBH and stem volume was also significant at the level of 0.01. These show that selection of the short rotation of P. massoniana for pulp and paper use would be efficient for five-year-old trees. According to the comparison of the heritability of all the traits and taking into account the result of canonical correlation analysis, height could be considered as the most important index for selection. Given wood quality of all the families, and flowering and fruit settings of the clones in a seed orchard, twelve fine families were selected at 10% selection ratio of height growth and stem volume. Translated from Scientia Silvae Sinicae, 2005, 41(6): 43–49 [译自: 林业科学]     

Clonal variation in crown structure, absorbed photosynthetically active radiation and growth of loblolly pine and slash pine

Crown structure, absorbed photosynthetically active radiation (APAR) and growth were analyzed in 300 replicated loblolly (Pinus taeda L.) and slash pine (Pinus elliottii Engelm. var. elliotti) clones to: (1) quantify genetic variation in crown structural traits, growth and APAR at the species, family and clonal levels; and (2) estimate within-family genetic and environmental influences on measured variables. Species and family-within-species differences were found in some growth traits, crown size, leaf area, APAR and branch angle. Loblolly pine developed larger crowns, exposed more leaf area with an acute angle, and intercepted more radiation than slash pine. Significant differences among clones within-family were found for stem volume and crown architecture. Loblolly pine and slash pine within-family, individual-tree broad-sense heritabilities ranged from 0.00 to 0.41 for growth and crown structural traits and most were between 0.10 and 0.25 when estimated from a combined analysis across families. Genetic correlations of crown size, leaf area and APAR with volume increment generally ranged from 0.60 to 0.75. This knowledge of the genetic interactions among growth and crown structural traits improves our understanding of how crown morphology affects light interception and stand development, and ultimately how these attributes can be incorporated in the selection of families or clones for the development of new crop tree ideotypes.     

日本落叶松半同胞家系生长变异研究

以建始县长岭岗林场17 a生日本落叶松种子园半同胞家系试验林为研究对象，研究不同家系间生长性状的遗传变异和相关性，选择出优良家系并对早期选择的结果进行验证，为日本落叶松遗传改良提供材料。结果表明： 各家系之间胸径、树高和材积的生长差异均达到极显著水平；6 a生与17 a生胸径、树高、材积之间的相关系数在0.541～0.947之间，呈极显著正相关；日本落叶松家系6a生早期选择结果与17 a生选择结果基本一致；以17 a生材积为选择指标，选出排名前10位的优良家系，胸径、树高和材积的遗传增益分别达到3.03%、1.77%和7.11%。     

特呈岛3种生境条件下白骨壤天然林的生长与树冠特征

文章以广东省湛江特呈岛高潮带、中潮带、低潮带白骨壤纯林为研究对象,调查了其树高、地径、冠长、冠幅以及分枝角度等,揭示了其生长及树冠特征.结果表明:不同潮带间白骨壤冠幅及树冠面积差异不显著(P＞0.05),而树高、地径、冠长及树冠体积均存在显著差异(P＜0.05),中潮带、高潮带与低潮带的树冠体积分别达31.522,15...     

马尾松实生种子园五年生的植株生长与分枝

本文研究了马尾松实生种子园建立第五年时植株的生长与分枝状况,研究的性状包括树高、胸径、枝条总数、年高生长、 年枝条生长量、年分枝数、不同分枝处树干直径等。对总的生长与分枝性状(含树高、胸径、枝条总数)分析表明:家系间只在胸径方面存在显著差异。对分年度的生长与分枝性状的研究表明:家系间在年高生长、年枝条生长量、年枝条直径方面无显著差异;年分枝数在刚建立的前两年家系间没有显著差异,后两年则差异显著;不同分枝处树干直径在连续的四年内,家系间均存在显著差异。不同年度的生长与分枝的趋势分析结果发现,大部分家系的年高生长与年枝条生长呈递增型,而大部分家系每年的分枝数却为波动型。这些研究结果表明,该马尾松实生种子园到建立的第五年时,家系间的差异大部分都不显著。究其原因,一方面可能是马尾松初期生长节律;另一方面可能是因为建园家系复杂的父本构成。因此,这个时期进行家系选择不太有效,建议在利用优树自由授粉子代建立实生种子园时,对他们先期进行苗期选择,而不是采用所有的子代。图1表4参20。     

思茅松自由授粉家系遗传参数与早期选择分析

[目的]通过对思茅松自由授粉子代测试林的生长与形质性状遗传参数的估计,进行优良家系选择,为建立思茅松高世代种子园及培育优良无性系苗木提供种质资源。[方法]采用随机区组试验设计,在214个思茅松自由授粉家系子代测试林中选择胸径、地径、树高、枝下高、冠幅、通直度、树干圆满度、树冠圆满度、材积及地上生物量等生长与形质性状,利用线性混合模型进行遗传参数的估计,进行优良家系筛选。[结果]思茅松自由授粉子代测试林生长与形质性状的遗传参数在家系间差异极显著。各性状的家系遗传力较高,其中,地径的家系遗传力最大(1.105)。材积的预期遗传增益高于地上生物量,利用家系/家系内选择方法进行优良家系的筛选,材积的预期遗传增益为60.75%,入选家系为60个;地上生物量的预期遗传增益为44.22%,入选家系为66个。轮盘数、通直度和树干圆满度对材积和地上生物量都有显著影响。[结论]在早期选择中,形质性状的遗传变异对思茅松自由授粉优良家系的选择有重要参考作用,4年生思茅松自由授粉家系子代测试林中各性状存在着丰富的遗传变异,在早期选择中可以筛选出适合不同培育目标的优良家系,最大限度挖掘其遗传潜力。     

杉木改良代无性系种子园子代测定林营建与评价

以阳新县七峰山林场杉木改良代无性系种子园自由授粉子代半同胞家系为研究对象,分析其树高、胸径、材积等生长性状,发现家系间存在极显著差异,说明杉木改良代无性种子园半同胞家系,经初级种子园子代测定林的选择,仍存在着较为丰富的变异,具选育潜力。其树高、胸径和材积间呈紧密相关关系。树高、胸径和材积的家系遗传力分别是0.4187、0.3315、0.4988,单株遗传力分别是0.2113、0.1329、0.2494,均为材积>树高>胸径,具有较强遗传力。按照33.3%的入选率,树高、胸径和材积入选10个家系均相同,其遗传增益分别是6.15%、7.21%、26.06%,可作为营建高世代种子园和进行人工交配进行全同胞测定的优良家系。     

南方红豆杉2年生容器苗多点试验的生长节律家系变异

[目的]对南方红豆杉家系进行了生长节律变异研究,以选育优良速生的南方红豆杉家系.[方法]在江西分宜、湖北京山、浙江淳安和浙江龙泉4个地点对2年生南方红豆杉家系容器苗进行了苗期遗传测定和苗高生长节律观测,分析了其性状变异的家系效应、地点效应及家系×地点的互作效应.[结果]表明参试的南方红豆杉苗高、地径和苗高生长节律参数在家系间、地点间和家系×地点间均表现出极显著差异.南方红豆杉家系间苗高最大值分别高出最小值76.20%(江西分宜)、52.98%(湖北京山)、55.42%(浙江淳安)和78.10%(浙江龙泉);地径最大值分别高出最小值126.67%、23.68%、37.02%和26.48%.南方红豆杉家系间苗高和地径变异系数在11.81%~26.50%之间.对南方红豆杉2年生容器苗各性状进行遗传力估算,遗传力在0.80~0.97之间.相关性分析认为不同测试点间苗高与苗高生长节律参数具有不同相互关系,江西分宜点苗高与线性生长速率呈负相关,而浙江龙泉点苗高与线性生长速率则呈显著正相关.以苗高作为主要性状指标,从4个测试点中筛选出7个南方红豆杉优良家系.[结论]南方红豆杉家系间,苗高、地径与苗高生长节律具有较丰富的遗传差异,遗传改良潜力较大,家系各性状遗传力较大,受较强的遗传控制,早期选择有一定的可靠性.家系与地点的互作效应显著说明部分家系生长受环境因素影响较强,遗传稳定性较弱;其中闽11和三元06两个优良家系在4个测试点中均被选中,遗传稳定性较强,可在多点进行推广.     

火炬松纸浆材优良家系多性状选择

对６年生火炬松自由授粉子代测定林进行了生长、材性和干形等性状的遗传参数估算和相关关系分析。树高、木材基本密度在家系间存在极显著差异，且具有较高的遗传力，胸径、材积、干材干重和管胞长度具中度遗传力，树干通直度和分枝性状未发现显著的家系间差异。干材干重与生长性状呈高度正相关，与木材基本密度呈微弱的负相关，而与管胞长度呈负相关。以浆材为选择目的进行家系指数选择，认为包含产量（干材干重）和质量（木材基本密     

美洲黑杨与不同种源青杨杂种子代无性系遗传变异和初步选择研究

参试材料为美洲黑杨50号(母本)和5个种源(各10个单株)青杨(父本)杂交获得的25个家系115个子代无性系。5年生生长性状的方差分析结果表明,子代无性系在父本不同种源间、种源内家系间和家系内无性系间3个不同水平上存在a=0．001水平的显著差异,具有较大选择潜力。根据子代无性系的生长量和水泡溃疡病抗性,初步选择出了36个生长量大且对水泡溃疡病有一定抗性的优良无性系。     

Modelling self-pruning and branch attributes for young Quercus robur L. and Fagus sylvatica L. trees

The aim of this study was to develop statistical models for first order branchiness in young planted forest stands of pedunculate oak (Quercus robur L.) and European beech (Fagus sylvatica L.), and to give an ecological and silvicultural interpretation to these models. The reported models focus on the lower most-valuable stem part (i.e. until 6 m height), and cover different tree development classes to capture the development of branchiness over time. For each species 30 study plots were selected spread over two nearby forests in Flanders (northern Belgium), minimising site and genetic variability. Branches were counted on a total of 399 oak and 376 beech trees. On a subsample of 30 trees per species (one tree per plot), detailed non-destructive branch measurements were performed, yielding data for 555 oak and 438 beech branches. For both species, models for tree self-pruning (i.e. total branch number and dead branch portion), branch mortality and branch architecture (i.e. branch diameter and branch insertion angle) were built. A generalised linear mixed modelling approach was adopted. The models for total branch number and dead branch portion may be interpreted in terms of four processes contributing to self-pruning: (1) stand and tree development, (2) tree competitive status, (3) stand density and (4) site humidity. The reported models reveal similar self-pruning rates in oak and beech, but with different driving factors: early branch dying and slow shedding for oak and the other way around for beech. Mortality of individual branches is further determined by branch position and branch dimension. Branch diameter and branch insertion angle of both species are mainly related to branch cord length and relative branch position. All modelled effects are consistent with known ecological and ecophysiological processes. Silvicultural implications for stand establishment and early tree selection are discussed. The reported models can be used to fine-tune operational silvicultural choices for quality timber production. This is a first step towards the integration of branchiness models for oak and beech into forest growth simulators.