巯基纤维素处理重金属废水研究

纤维素与硫代乙醇酸在乙酸酐和乙酸介质中发生酯化反应，合成巯基纤维素(SC)。含重金属的废水中加入碱调节废水pH值至9～10，静置、过滤。滤液用酸调pH值至5～7后流经SC管，去除废水中镉、铅、铜、汞等重金属。SC用稀盐酸淋洗再生。对使用和再生条件及吸附机理进行了研究。实验结果：SC中巯基含量大于2％时，每公斤SC对金属离子的吸附容量大于0．2mol；处理水中镉、铅、铜、汞浓度低于0．05mg／L；SC再生后可循环使用。     

Immunolocalization of (1,4)-beta-galactan in tension wood fibers of poplar

The occurrence and distribution of (1,4)-beta-galactan in wood cells of poplar (Populus trichocarpa Torr. & A. Gray x P. koreana Rehder) were studied by immunolabeling with a monoclonal antibody (LM5) specific to this carbohydrate epitope. Immunofluorescence microscopy revealed exclusive binding of the LM5 antibody to tension wood fibers, indicating the specific presence of (1,4)-beta-galactan in cell walls of this wood cell type. Higher magnifications achieved with the fluorescence microscope and additional immunogold electron microscopy showed that the binding of the LM5 antibody was mainly restricted to a narrow cell wall area between the gelatinous G-layer and the secondary cell wall. This labeling pattern strongly suggests a role of (1,4)-beta-galactan in cross-linking the G-layer and secondary cell wall. Furthermore, the exclusive localization of (1,4)-beta-galactan in tension wood strengthens the view that this carbohydrate epitope can be considered a highly specific marker of reaction wood formation in mechanically stressed trees.     

壳聚糖前处理提高木材表面染色效果的研究

本文采用壳聚糖对木材表面进行前处理后，然后按不同树种，同一染料和同一树种，不同染料两种方式进行染色试验。结果表明：不同树种壳聚糖处理与未处理材的染色效果相比，处理材染色均一，没有色斑，颜色浓深，木材纹理清晰，当采用酸性红Ｇ染色，处理材明度减小，色饱和度增加，色差和色相差变化均很大；同一树种的处理材用不同染料染色，效果不同，亮色系染料染色效果较暗色系染料好。     

Formation of tyloses in felled Quercus rubra L.

Summary Tyloses form in red oak (Quercus rubra L.) sapwood in a period of hours if the wood is cut during the active growth season and stored in green condition in the laboratory. If the wood is cut during dormancy and stored in green condition, tyloses form in a period of months. Electron microscopic examination reveals that the wall of a tylosis forms from a promonths. Electron microscopic examination reveals that the wall of a tylosis forms from a protective layer that develops inside the secondary wall of the ray cell in the vessel-ray pit-pair. Protective layers are also present in fiber-parenchyma pit-pairs. Protective layers may exhibit variable thicknesses, with light and dark layers alternating. A young tylosis wall consists of two layers: An electron-dense outer layer and an electron-transparent inner layer. Tyloses walls may attach to each other and form multilamellate tyloses. Sometimes the individual layers of tyloses walls appear lamellated. Because of the type of formation and structure, the tylosis wall in red oak apparently is a primary wall rather than a secondary. Tyloses walls have simple pits. The findings of this study enable felled hardwoods with potential for forming tyloses to be used without the destructive influence of tyloses.     

A chemical and ultrastructural study of the Bamboo species Phyllostachys makinoi Hay

Summary A culm sample of Phyllostachys makinoi was investigated by analysis of its chemical composition, and by electron microscopic observations of the cell wall structure before and after extraction and degradation procedures. Quantitative determination of the components resulted in 2.6% extractives, 25.5% lignin, 45.3% alpha-cellulose, and 24.3% polyoses. The main polyose is an arabinoxylan with a Xyl: Ara ratio of about 17:1. The electron micrographs show a lamellar deposition of lignin and polyoses within the secondary walls. Lignin is obviously soluble by parts in alkaline as well as in acidic reagents. Sodium hydroxide solution removes cell wall substance mainly from the secondary walls, whereas trifluoroacetic acid removes substance from compound middle lamellae.     

壳聚糖及其金属配位聚合物在木材工业中的应用现状与展望

壳聚糖(chitosan)是从虾、蟹等甲壳动物中提取的一种天然碱性高分子多糖,壳聚糖易与过渡金属及稀土金属配位形成壳聚糖金属配位聚合物[chitosan metal complexes(CMC)],壳聚糖及壳聚糖金属配位聚合物是目前研究广泛的一类新型高分子生物材料,近年来的研究表明壳聚糖及壳聚糖金属配位聚合物在木材工业中有着广泛的应用前景,例如作为环保型木材防腐剂,促进木材防腐工业的持续发展。笔者介绍了其基本应用,重点报道其在木材染色、木材保护及用于木质材料胶合方面的应用及研究进展。     

Effect of adding steam-exploded wood flour to thermoplastic polymer/wood composite

The effect of steam-exploded wood flour (SE) added to wood flour/plastic composite was examined using SE from beech, Japanese cedar, and red meranti and three kinds of thermoplastic polymer: polymethylmethacrylate, polyvinyl chloride, and polystyrene. Addition of SE increased the fracture strength and water resistance of the composite board to an extent dependent on the polymer species and the composition of wood/SE/polymer. However, water resistance decreased with the increasing proportion of SE when SE meranti was added. Effects of the wood species of SE on the properties of resulting board were small. An increased moisture content of wood flour or SE (or both) increased the variation of board performance.     

聚乙烯亚胺-纤维素的合成及对胆红素吸附性能

以聚乙烯亚胺(PEI)为功能基团、微晶纤维素(MCC)为载体通过环氧氯丙烷将PEI接枝到MCC上,制得功能高分子吸附材料PEI-MCC,通过红外光谱、元素分析、X射线衍射对PEI-MCC进行结构表征;测定其对胆红素的吸附性能。结果表明PEI-MCC的合成条件为:在N2保护下,环氧化纤维素(EC)与PEI的质量比为1∶6,反应介质为pH值11的氢氧化钠水溶液40 mL,反应温度70℃,反应时间12 h;过滤产物,水洗至中性,40℃真空干燥24 h,得微黄色固体粉末PEI-MCC,此时结晶度为78.36%,含氮量5.27%。静态吸附测得PEI-MCC对胆红素吸附容量为9.23 mg/g,吸附达平衡的时间为4 h。     

漆酚—水杨酸接枝树脂的合成及对金属离子的吸附

介绍了漆酚－水杨酸接枝树脂的合成方法,用红外和紫外光谱对合成树脂进行了表征,初步研究了ＵＳＲ对多种金属离子的吸附性能,结果显示,ＵＳＲ能与Ａｇ＾＋,ｇ＾２＋,Ｃｕ６２＋,Ｆｅ＾３＋,Ａｌ＾３＋,Ａｉ＾３＋等金属离子络合,ＵＳＲ等用于金属离子的分离,也能作为高分子催化剂和固定化漆树酶的载体。     

Comparative sorption of copper and nickel from aqueous solutions by natural neem (<Emphasis Type="Italic">Azadirachta indica</Emphasis>) sawdust and acid treated sawdust

This study investigates the potential use of neem (Azadirachta indica) sawdust treated with hydrochloric acid for the removal of copper (II) and nickel (II) ions from wastewater. The effects of different system variables, viz, adsorbent dosage, initial metal ion concentration, pH and contact time were studied. The results showed that as the amount of the adsorbent was increased, the percentage of metal ion removal increased accordingly. Optimum pH value for metal adsorption is determined as 5.0 for Cu (II) and 4.0 for Ni (II) ions. Maximum metal is sequestered in 150 min for Cu (II) and 180 min for Ni (II) after the beginning of every experiment. Similar experiments were carried out with acid treated sawdust to compare the results. The adsorption of metal ions followed a first order rate equation. Both Freundlich and Langmuir adsorption models are suitable for describing the sorption of Cu (II) and Ni (II) on the two forms of sawdust. Furthermore, the natural organic matter (neem sawdust) is characterized by FTIR spectra and surface area analysis. At optimal conditions the maximum adsorption capacity is found to be 48.3 and 286 mg/g for Cu (II) and 31.5 and 74.1 mg/g for Ni (II) in natural and acid treated forms, respectively.     

Effect of moisture content on the longitudinal tensile creep behavior of wood

In our previous report, we investigated the effect of the microfibril angle (MFA) in the middle layer of the secondary wall (S₂) on the longitudinal creep behavior of a thin homogeneous earlywood specimen sugi. In the present study, we investigated the role of moisture on the tensile creep behavior of wood. We discuss the creep behavior of the wood cell wall from the viewpoint of the composite structure of the cell wall and the properties of the constituent materials. A microtomed thin specimen of earlywood of sugi (Cryptomeria japonica D.Don) was used for the longitudinal tensile creep test. Creep tests were conducted at three moisture stages (oven-dry, air-dry, fiber saturation point) over a broad range of MFA. Results showed that the longitudinal tensile creep behavior was highly dependent on both the moisture content and the MFA. With a small MFA, the variation in the creep function among the three moisture states was very small. For a large MFA, the variation in the creep function was larger. At low moisture contents, the magnitude of the creep function was very small, while at high moisture content, it was very large except for the case of specimens with very small MFA. Those results show that the longitudinal tensile creep behavior was directly affected by the fine composite structure and the internal properties of the cell wall constituents.     

多胺型螯合棉纤维的制备与吸附性能研究

棉纤维经碱化,环氧化,烯胺化,制得了三种多胺型系列离子螯合棉纤维,讨论了影响环氧化,烯胺化的各种因子,给出了一种简便的环氧值的测定方法,同时也讨论了该类螯合剂的吸附与解吸性能。     

Relation between growth stress and lignin concentration in the cell wall: Ultraviolet microscopic spectral analysis

Lignin content in the cell wall was investigated to examine its relation with growth stress, using an ultraviolet microscopic spectrum analyzer. Although a weak correlation existed between the growth stress and lignin concentration in the compound middle lamella, it was believed that the compound middle lamella did not contribute to compressive growth stress generation as there was no correlation between growth stress and lignin concentration in the cell corner part of the intercellular layer. In the secondary wall, larger compressive growth stress was associated with higher lignin concentration especially in the outer part. This finding confirms that lignin contributes positively to the generation of compressive longitudinal growth stresses in the compression wood and more substantially in the outer part of the secondary wall. This experimental result strongly supports our hypothesis of growth stress generation given by the model.This paper was presented at the International Academy of Wood Science Meeting at Vancouver, Canada, July 1997     

Comparison between 10,000-year old and contemporary spruce lignin

Wood from white spruce Picea glauca that had been preserved by rapid burial in lake sediments 10,000 years ago, was investigated and compared to a contemporary reference white spruce wood. The 10,000-year old sample appeared to have an intact primary cell wall and middle lamella, whereas the carbohydrate monomer distribution, and microscopic images showed that the secondary wall was at least partially removed, indicating that this structure had been selectively attacked by bacteria. The Klason lignin amount in the aged spruce was found to be 60%. The relative lignin monomer content in the aged spruce was 9% lower than that of the reference wood, showing that there were fewer β-O-4′ linkages in the aged sample. This finding was supported by SEC analysis of the thioacidolysed samples as a larger proportion of lignin oligomers were observed in the aged spruce than in the reference material. This indicates a somewhat greater number of condensed bonds in the aged spruce than in the reference spruce sample. Quantitative ¹³C NMR analysis and HSQC techniques applied on milled wood lignins (MWL) revealed no significant structural differences between the aged spruce and the reference.     

Electromagnetic shielding wood-based composite from electroless plating corrosion-resistant Ni–Cu–P coatings on Fraxinus mandshurica veneer

A novel and simple electroless Ni–Cu–P plating process was used for preparing corrosion-resistant and electromagnetic interference shielding wood-based composite. The effects of CuSO₄·5H₂O concentration, pH value in the plating solution and operation temperature on the metal deposition, surface resistivity, chemical composition, corrosion resistance and surface morphology of the composite were investigated. The surface morphologies were observed by using scanning electron microscopy and the chemical compositions were analyzed by X-ray energy dispersive spectrometer. The electromagnetic shielding effectiveness (ESE) was measured by spectrum analyzer. The corrosion resistance was evaluated by potentiodynamic corrosion measurement. The results show that metal deposition increases with pH value and temperature increase; however, it decreases with CuSO₄·5H₂O concentration increase. The corrosion resistance of the plated Ni–Cu–P coatings obviously depends on the total content of Cu and P in the coating. Higher total content of Cu and P leads to higher corrosion resistance. The optimum conditions are as follows: CuSO₄·5H₂O concentration of 1.0 g/L, pH value of 9.5, and operation temperature of 90 °C. The obtained coating contains 77.41 % Ni, 8.96 % Cu, and 13.63 % P. The wood-based composite exhibits higher corrosion resistance and ESE of around 60 dB in frequencies ranging from 9 kHz to 1.5 GHz. In this paper, a promising process for corrosion-resistant and electromagnetic shielding wood-based composites was developed.     

脱氢枞醇丁烯二酸单酯的合成及助焊性能研究

以脱氢枞酸和顺丁烯二酸酐为基本原料,先将脱氢枞酸经氢化铝锂还原为脱氢枞醇,再与顺丁烯二酸酐反应得到脱氢枞醇丁烯二酸单酯,并通过傅里叶红外光谱、核磁共振氢谱及质谱对产物进行表征。将脱氢枞醇丁烯二酸单酯配制成质量分数为25%的液体助焊剂,测试了助焊剂的物理性能,同时采用扩展率试验法研究了其对3种钎料Sn37Pb、Sn0.7Cu及Sn3.0Ag0.5Cu的助焊性能。结果表明,脱氢枞醇丁烯二酸单酯质量分数为25%的液体助焊剂在物理稳定性、干燥度、铜板腐蚀性以及焊后表面绝缘电阻等方面均符合相关标准要求,对3种钎料Sn37Pb、Sn0.7Cu及Sn3.0Ag0.5Cu的扩展率分别为76.6%、81.6%和75.3%,助焊活性均高于相同条件下的精制氢化松香助焊剂,并且钎焊Sn37Pb和Sn0.7Cu钎料时的焊点形貌规则,表面光亮无凹坑,明显优于精制氢化松香。     

西南桤木木塑复合材料的研究

采用乙烯基类系列单体——丙烯腈(AN)、甲基丙烯酸甲酯(MMA)、丙烯酸(AA)三元共聚单体注入西南桤木木材中，制成新型的高分子复合材料(AMA—WPC)。单体的注入用满细胞法，聚合用热引发法，并采用添加氯化锌对木材细胞壁进行活化等工艺对木塑复合材进行了研究和分析。实验样品按照国标GBl927—1943有关规定进行测试，并结合傅立叶红外光谱和扫描电镜探讨了各因素对AMA—WPC材料接枝率及性能的影响。结果表明：改性后西南桤木木塑复合材料具有优异的物理、力学性能。与素材相比较，AMA—WPC的密度提高了59．8％，顺纹抗压强度提高了76．7％，抗弯强度提高了90．4％，抗弯弹性模量提高22．2％，端面硬度提高102．3％，径面硬度提高153．6％，弦面硬度提高152．2％，吸水率降低56．7％，湿膨胀率降低19．0％。     

Seasonal differences in freezing stress resistance of needles of Pinus nigra and Pinus resinosa: evaluation of the electrolyte leakage method

Seasonal changes in freezing stress resistance of needles of red pine (Pinus resinosa Ait.) and Austrian pine (Pinus nigra Arnold) trees were measured by an electrolyte leakage method and by visual observation. During most of the year, freezing stress resistance determined by the two methods gave similar results. The electrolyte leakage method provided a good estimate of seasonal changes in freezing stress resistance except for red pine needles in their most winter-hardy state. To obtain a reliable estimate of freezing stress resistance in winter-hardy red pine needles it was necessary to combine the electrolyte leakage method with visual observations. When red pine needles survived exposure to -80 degrees C or lower, electrolyte leakage was never more than 30% even when the needles were exposed to a slow freeze-thaw stress of -196 degrees C. However, rapid freezing of red pine needles to -196 degrees C resulted in electrolyte leakage of over 80%. Red pine needles attained a much higher freezing stress resistance during the winter than Austrian pine. Red pine needles also acclimated and deacclimated faster than Austrian pine needles. An index of injury was developed based on the electrolyte leakage method ((R(2) + R(1))/2, where R(1) is the minimum % electrolyte leakage from noninjured tissue and R(2) is the maximum % electrolyte leakage at the highest injury) that reliably predicted freezing stress resistance of pine needles for most of the year. Important aspects for developing a successful index of injury for pine needles are: use of cut needles, vacuum infiltration and shaking during incubation in water.We conclude that: (1) during cold acclimation the cell wall properties of the pine needles changed and these changes, which appeared to differ in the two species, might explain the very low leakage of electrolytes from winter-hardy needles of red pine; (2) pine needles survive winter by developing the ability to tolerate extracellular ice formation, because after rapid freezing the needles were severely injured; and (3) red pine is adapted to a shorter growing season and colder winters than Austrian pine.     

Quantification of visual inducement of knots by eye-tracking

Knots have been considered an undesirable visual feature of lumber. To clarify the essence of this visual undesirability, eye-tracking data from 20 subjects, who freely observed 55 images of wood wall panels, were recorded and distribution maps of eye-fixation pauses were composed. These maps were compared with the arrangement of knots on each knotty wall panel image and the visual inducement of knots was evaluated using a new numerical index of pausing probability. The present study is the first to objectively quantify the visual inducement of knots. In addition, the subjective noticeability of knots and ten visual impressions of each wood panel image were investigated by a sensory evaluation. There was a very clear linear relationship between the visual inducement of knots and the subjective noticeability of knots. A correlation analysis suggested that many visual impressions of wood wall panels were influenced by a complementary effect between the subjective noticeability of knots and the visual inducement of knots. The visual impact of knots was masked to some extent by special visual stimuli such as deep red grooves on the wood wall panels. This study was presented at the 56th and 57th Annual Meetings of the Japan Wood Research Society, Akita and Hiroshima, August 2006 and August 2007, respectively     

PEI/APP改性脲醛树脂制备阻燃胶合板及性能

以聚乙烯亚胺(PEI)为改性剂处理聚磷酸铵(APP)制备得到APP@PEI阻燃体系,并将其加入到脲醛树脂(UF)中,制备阻燃胶合板.研究了APP@PEI对UF胶黏剂理化性能的影响,并进一步探讨其对胶合性能及阻燃性能的影响.结果表明:APP、PEI和APP@PEI对UF的黏度、pH和固化时间均有影响.当APP添加量为10...