Tillage systems and soil properties in West Africa

West African soil resources have high potentials for enhancing agricultural productivity, if well-managed and restored. In this context, the importance of tillage systems have not been fully appreciated as an integral part of good farming systems in order to tally with the peculiarities of the soil, crops and the environment. Most improved tillage systems are not widely used, although the relatively small-scale uncontrolled application of mechanical tillage has had untold adverse effects on properties and productivity of soils in the humid and subhumid regions.

In contrast, mechanical soil tillage involving deep plow-till and soil inversion has proven beneficial on compact soils of arid and semi-arid regions. The plow-based systems not only reduce soil bulk density and soil strength but also improve the efficiency of water and nutrient use.

The exposure of structurally unstable Alfisols and Ultisols predominant in the humid and sub-humid regions by mechanical tillage can cause more adverse effects than beneficial effects on soil properties and crop yields, especially on a long-term basis. On the other hand, the no-till system with crop residue mulch can maintain favorable soil properties. The conservation tillage system, however, requires more research to make it applicable to diverse soil types, crops and ecoregions.

Apart from the long-term effects of tillage on the level of soil organic matter and the attendant release of nutrients, the effects of tillage systems on the chemical properties of soil are often contradictory and are confounded by many other factors so that clear-cut cause and effect relationships are not obvious. The interactions between fertilizer application, liming, soil organic matter content and tillage systems, especially on acid soils, are such examples. More detailed studies on nutrient dynamics under different tillage systems are necessary. The interactions between the relatively new technologies of alley cropping and agroforestry which allow a more continuous use of the land should be investigated vis-à-vis tillage systems.

Long-term, well-designed, adequately equipped experiments (which are scanty in West Africa) should be encouraged to elucidate and confirm results of many short-term experiments.     

Tillage systems and soil compaction in Africa

Introduction of mechanized agriculture induces profound changes in soil characteristics. Soil compaction originating from mechanical land clearing, mechanized cultivation, and continuous cropping is aggravated by crusting and hard-setting phenomena of soils, and widespread occurrence of naturally compacted upland soils and subsoil gravel horizons. Natural and anthropogenically induced soil compaction has detrimental effects on growth and yields of a wide range of crops. Furthermore, compaction can persist for a long time if no adequate measures are taken to minimize or alleviate it.

In humid and subhumid regions of Africa, the no-tillage system with crop residue mulch is an important method of controlling soil compaction, followed in significance, by biological and mechanical loosening where motorized land clearing is the causative agent. Biological methods involve cover crops and alley cropping or agroforestry. Where new land areas need to be opened up, land clearing should be done by the slash-and-burn method, so that most of the nutrients in the vegetation are returned to the soil. Where mechanical land clearing is inevitable, forest removal should be done by the use of shear blade, whereby most of the roots and stumps are left in the ground intact, and the forest litter is not removed.

In semi-arid and arid regions of Africa, alleviation of soil compaction can be done by two methods. One method is to use the controlled traffic tillage system. Controlled traffic results in both a loose-rooting zone and a firmed traffic lane, thereby providing good plant growth and trafficability for timely field operations. The second method is to use mechanical loosening techniques, i.e. ploughing by animal traction or tractor power, chiseling, deep ripping, subsoiling, and tied-ride system. The effect of mechanical loosening, however, tends to be of short duration if the ensuing field traffic is not controlled.     

Tillage and soil physical properties in semi-arid West Africa

In the semi-arid zone of West Africa, the growth of annual crops is severely constrained by soil and climatic conditions. Soil physical properties, specifically low porosity resulting from the particle-size distribution and predominantly low-activity clay, restricts root system development and crop growth. Using intensive mechanical tillage is an effective method in enhancing soil porosity and physical properties.

This paper summarizes the results of tillage experiments conducted for about 30 years in West Africa. Tillage methods evaluated involved deep plowing with motorized equipment or animal powered tools using tined equipment and ridgers for earthing up. Soil properties and plant characteristics evaluated were porosity, root development, microbial life, soil-water reserves, and crop yields. Results of no-tillage and minimum-tillage studies are also discussed. Application of reduced tillage techniques did not produce satisfactory results. Several mulch farming systems, using dead or living vegetative covers, were also tested in regions where annual rainfall exceeds 1000 mm.

The results obtained support the conclusion that soil tillage is an excellent means of improving soil physical properties and crop yields in the semi-arid regions of West Africa. However, adaptation of this technique by resource-poor small farmers poses several technical and logistical problems.     

Tillage systems and soil properties in North America

This paper reviews current knowledge on the range and extent of various tillage systems used in North America with special reference to the effects on soil properties, the erosion hazard and water quality. The increasing adoption of conservation-tillage systems since their introduction in the early 1960s follows an enhanced awareness of the increasing risks of soil erosion and non-point source pollution and the high cost of fuel with conventional tillage. Most “conventional tillage” systems encompass complete inversion tillage along with several secondary and tertiary tillage methods. In contrast, conservation-tillage systems involve streamlining various farm operations, thereby reducing the frequency and intensity of the soil manipulative operations. Reduction in tillage intensity has been accompanied by the development of rotations and cropping systems, methods of surface and internal drainage, fertilizer technology and pest management alternatives.

The status of antecedent soil physical properties is an important factor affecting the choice of tillage systems. Important soil physical properties governing the choice of tillage systems include soil wetness and anaerobiosis, soil temperature and soil structure including its susceptibility to compaction, crusting or erosion. Tillage systems affect soil physical, chemical and biological properties. Among drastic tillage-induced changes in soil properties are bulk density, infiltration rate, aggregation and aggregate size distribution, soil organic carbon and nutrient profile, microbial activity and species diversity, and the population of earthworms. Macropores and biochannels are usually more prevalent in conservation-tillage than conventional-tillage systems. Conservation tillage induces stratification of soil organic matter and related nutrients, enhances the activity of soil fauna and leads to acidification. The magnitude of these changes depends on the soil type, the cropping systems and the type of conservation tillage adopted. Soil organic carbon and nutrient stratification are generally more pronounced in coarse-textures than in clayey soils. Conservation tillage is also associated with greater biomass pool size. The latter affects the nutrient response curves of the soil. Nitrification and denitrification are other important processes affected by tillage systems.

The widespread adaption of conservation-tillage systems, although beneficial in controlling off-site sedimentation, has raised concerns about the potential for increased leaching of nutrients and pesticides to groundwater. Important pollutants associated with conservation tillage are nitrate and pesticides. Some studies have shown little effect of tillage on losses of pesticides. Conservation tillage may suppress crop yields, especially on heavy textured soil with poor internal drainage and in those prone to soil compaction caused by vehicular traffic.     

Tillage systems and soil properties in Latin America

A review of tillage systems in Latin America revealed that considerable research on this topics has been done and much is currently in progress. Results of most of this tillage research, however, have not been published in international refereed journals, thus making it difficult to assess the current state of the art on this topic. A high percentage of tillage research results has not been published at all. In general, conservation tillage practices, that is, those commonly referred to as no-till and minimum till, had higher bulk densities in the surface soil, but lower macroporosities, infiltration rates and crop yields as compared with conventional tillage, which was typically disk plowing. Chisel plowing and subsoiling, deep tillage practices whose action extends below the usual depth of disk plowing, usually decreased mechanical impedance, improved root penetration and increased crop yields. Soil loss from cropped land was usually greatest under conventional tillage unless mulch was applied to the soil surface. We believe that some form of tillage practice that mixes the surface soil layer will have to be incorporated from time to time into any tillage system to maintain soil conditions adequate for sustained continuous cropping.     

Tillage methods and soil and water conservation in eastern Africa

This paper reviews some research studies on tillage methods influencing soil and moisture conservation in the eastern African countries of Kenya, Tanzania, Malawi and Ethiopia during the past four decades. Most of these studies were conducted in marginal rainfall (semi arid) areas and on shallow soils of various textures (sandy clay loam, sandy clay, clay and loam). The studies were meant to establish the effects of tillage and residue management practices on physico-chemical soil properties (i.e. structure, bulk density, soil moisture and organic matter contents), runoff and infiltration.

This review emphasizes the importance of appropriate tillage and residue management methods (contour bunds and terraces, minimum tillage, tied ridging, mulching and conventional tillage) in providing soil conditions favourable for soil moisture conservation and subsequent crop performance and yield on smallholder farms.     

Tillage methods and soil and water conservation in West Africa

A review is made of appropriate tillage methods for West African soils. Soil and ecological constraints to crop production and soil and water conservation measures in West Africa are discussed. Experimental results relating to the effects of different tillage methods on soil productivity and crop responses are described for different eco-regions in relation to the potentials of different tillage methods for soil and water conservation. The review shows that limited experimental data and diverse research methodologies make generalizations from the available information tenuous at best. Serious gaps in our knowledge of the ecological suitability of alternative tillage methods and soil and water conservation technologies are identified. The future course for regionally coordinated research in soil tillage and soil and water conservation is suggested.     

Tillage effects on near-surface soil hydraulic properties

The processes for the formation of porosity are thought to differ between tilled and non-tilled cropping systems. The pores are created primarily by the tillage tool in the tilled systems and by biological processes in non-tilled systems. Because of the different methods of pore formation, the pore size distribution, pore continuity and hydraulic conductivity functions would be expected to differ among tillage systems. The objective of this study was to determine effects of three tillage systems — mold-board plow (MP), chisel plow (CP), and no-till (NT) — on hydraulic properties of soils from eight long-term tillage and rotation experiments. Tillage effects on saturated and unsaturated hydraulic conductivity, pore size distribution, and moisture retention characteristics were more apparent for soils with a continuous corn (CC) rotation than for either a corn-soybean (CS) rotation or a corn-oats-alfalfa (COA) rotation. Pore size distributions were similar among tillage systems for each soil except for three soils with a CC rotation. The MP system increased volume of pores >150 μm radius by 23% to 91% compared with the NT system on two of the soils, but the NT system increased the volume of the same radius pore by 50% on one other soil. The NT system had 30 to 180% greater saturated hydraulic conductivity than either the CP or MP systems. The NT system with a CC rotation showed a greater slope of the log unsaturated hydraulic conductivity; log volumetric water content relationship on two of the soils indicating greater water movement through a few relatively large pores for this system than for either the CP or MP systems.     

Tillage choices affect biochemical properties in the soil profile

Intensive conventional farming and continuous use of land resources can lead to agro-ecosystem decline and increased releases of CO₂ to the atmosphere as soil organic matter (OM) decays. The aim of this research was to evaluate the influence of varying types and depths of tillage on microbial biomass, C content, and humification in the profile of a loamy-sandy soil in the Mugello valley, close to the Apennine Mountains, in Italy. Soil samples were collected to depths of 0–10, 10–20, 20–30 and 30–40 cm, in the ninth year following introduction of tillage practices. Highest content of all C forms examined (total, extractable and humified) was found at the 0–10 cm depth with minimum tillage (MT) and ripper subsoiling (RS) and at the 30–40 cm depth with conventional tillage (CT). Humified C decreased with depth in soils under MT and RS. None of the tillage systems showed any difference in total N and microbial biomass C in the upper depths, but concentrations were greater below 20 cm in soils subjected to CT, than other tillage systems. Crop production was similar in all tillage systems. Stratification and redistribution of nutrients were consistent with the well known effects of tillage reduction. Total organic C and its distribution in the profile depended on the tillage system employed. MT and RS can be regarded as excellent conservation tillage systems, because they also sequester C.     

Tillage effects on soil properties and wheat cultivars traits

Information regarding the evaluation of tillage effects on soil properties and rainfed wheat (Triticum aestivum L.) cultivars of Iranian fields is not available. Therefore, this research was conducted in Sanandaj (west of Iran) using a randomized complete block design in a split-plot arrangement. Three types of tillage including conventional tillage (moldboard plow to soil depth of 30 cm plus disk harrow twice), minimum tillage (chisel plow to soil depth of 15 cm plus disk harrow once) and no-tillage are assigned to the main plots. Wheat cultivars (Sardari and Azar2) were randomly distributed within the subplots in each tillage system. Results showed that the greatest bulk density and cone index were found in the minimum tillage and no tillage systems. The highest rate of grain yield was obtained in the minimum tillage system. The grain yield of Sardari cultivar (1624.1 kg ha^?1) was significantly greater than that of Azar2 (1572 kg ha^?1). Minimum tillage improved soil physical properties and wheat growth compared with the other tillage systems. No tillage increased microbial biomass carbon and bacteria number in soil compared with the other tillage systems. We conclude that using minimum tillage for Sardari cultivar will be more effective compared with other treatments.     

Tillage effects on soil properties and maize productivity in western Turkey

Information regarding the evaluation of long-term tillage effects on soil properties and summer maize growth after winter vetch in western Turkey is not available. Therefore, this study was conducted for 5 years with three types of tillage including conventional (mouldboard plough) and conservation (rototiller and chisel). Results indicated that tillage had no significant effect on penetration resistance, except at the bottom of 20 cm soil depth where it was higher in mouldboard plough than in rototiller and chisel. Bulk density in the topsoil of 10 cm decreased with the degree of soil manipulation during tillage practices. Rototiller caused significantly higher root, leaf and stems biomass and plant height than the other systems. The root dry weight was higher in the topsoil of 10 cm than at the bottom of this soil depth for all systems. The highest root dry weight was found in fourth year of chisel, but the lowest was recorded in the same year of plough, especially at the bottom of 20 cm due to higher penetration. Rototiller improved soil properties and maize growth compared to other systems in 2 of 5 years. We concluded that using rototiller for maize after winter vetch will be more effective compared with other systems.     

Tillage and cover effects on soil microbial properties and fluometuron degradation

This research concerns the influence of no tillage (NT) or conventional tillage (CT) and a ryegrass (Lolium multiforum Lam.) cover crop in a cotton (Gossypium hirsutum L.) production system on soil and ryegrass microbial counts, enzyme activities, and fluometuron degradation. Fluorescein diacetate hydrolysis, aryl acylamidase, and colony-forming units (CFUs) of total bacteria and fungi, gram-negative bacteria, and fluorescent pseudomonads were determined in soil and ryegrass samples used in the degradation study. Fluometuron (14C-labelled herbicide) degradation was evaluated in the laboratory using soil and ryegrass. The CT and NT plots with a ryegrass cover crop maintained greater microbial populations in the upper 2 cm compared to their respective no-cover soils, and CT soils with ryegrass maintained greater bacterial and fungal CFUs in the 2–10 cm depth compared to the other soils The highest enzymatic activity was found in the 0–2 cm depth of soils with ryegrass compared to their respective soils without ryegrass. Ryegrass residues under NT maintained several hundred-fold greater CFUs than the respective underlying surface soils. Fluometuron degradation in soil and ryegrass residues proceeded through sequential demethylation and incorporation of residues into nonextractable components. The most rapid degradation was observed in surface (0 to 2 cm) soil from CT and NT–ryegrass plots. However, degradation occurred more rapidly in CT compared to NT soils in the 2 to 10 cm depth. Ryegrass cover crop systems, under NT or incorporated under CT, stimulated microbiological soil properties and promoted herbicide degradation in surface soils.     

Tillage and straw management for modifying physical properties of a subarctic soil

Conservation tillage practices are intended to minimize soil erosion. Yet little is known concerning changes in physical properties of subarctic soils subject to tillage practices. This study ascertained whether physical properties of a newly cleared subarctic soil are altered after 7 years of continuous barley (Hordeum vulgare L.) using different tillage and straw management strategies. Tillage and straw treatments were established in 1983 near Delta Junction, Alaska, and consisted of conventional fall and spring disk, fall chisel plow, spring disk, and no-tillage. Tillage plots were split by straw management practices, which included straw and stubble, stubble only, and no straw or stubble. Soil samples were collected from the upper 0.15 m of the profile in the spring of 1990 to assess water content, bulk density, saturated hydraulic conductivity, dry aggregate and mechanical stability, penetration resistance, water retention, and particle size distribution. Percent non-erodible aggregates, mechanical stability, and penetration resistance were greater for no-tillage compared to conventional tillage, chisel plow, and spring disk. No-tillage soils were also typically wetter, denser, and had a greater hydraulic conductivity. The spring disk treatment was least susceptible to erosion and also conserved soil water compared with chisel plow. Straw maintained on the surface conserved water and promoted soil stability.     

Tillage implement disturbance effects on soil properties related to soil and water conservation: a literature review

The effects of tillage implement distrubance on the physical properties of soil have been widely studied. However, because soil properties resulting from the use of a given implement vary due to implement factors (depth and speed of tillage) and soil factors (water content, texture, residue cover, etc.), soil properties for a given operation are difficult to visualize, let alone predict. This report summarizes the ranges of selected soil property responses observed in previous tillage studies and identifies factors that must be considered in developing useful models to predict the effects of tillage on soil properties that are related to soil and water conservation. Considered are soil mechanical properties (surface micro-relief, aggregate size distribution and bulk density) and hydraulic properties and processes (water retention, saturated conductivity, infiltration and evaporation). For future literature reports on tillage to be useful for developing comprehensive relationships between tillage and soil properties, the reports should include information on: soil classification, texture, water content (or time of precipitation), bulk density, mechanical impedance and organic matter concentration; tillage method, depth and speed of operation; previous crop, including availability of crop residues; and previous soil management history (compacted soil, irrigated or dryland, etc.).     

Tillage effects on soil hydraulic properties in space and time: State of the science

Soil tillage practices can affect soil hydraulic properties and processes dynamically in space and time with consequent and coupled effects on chemical movement and plant growth. This literature review addresses the quantitative effects of soil tillage and associated management (e.g., crop residues) on the temporal and spatial variability of soil hydraulic properties. Our review includes incidental management effects, such as soil compaction, and natural sources of variability, such as topography. Despite limited research on space–time predictions, many studies have addressed management effects on soil hydraulic properties and processes relevant to improved understanding of the sources of variability and their interactions in space and time. Whether examined explicitly or implicitly, the literature includes studies of interactions between treatments, such as tillage and residue management. No-tillage (NT) treatments have been compared with various tillage practices under a range of conditions with mixed results. The trend, if any, is for NT to increase macropore connectivity while generating inconsistent responses in total porosity and soil bulk density compared with conventional tillage practices. This corresponds to a general increase in ponded or near-zero tension infiltration rates and saturated hydraulic conductivities. Similarly, controlled equipment traffic may have significant effects on soil compaction and related hydraulic properties on some soils, but on others, landscape and temporal variability overwhelm wheel-track effects. Spatial and temporal variability often overshadows specific management effects, and several authors have recognized this in their analyses and interpretations. Differences in temporal variability depend on spatial locations between rows, within fields at different landscape positions, and between sites with different climates and dominant soil types. Most tillage practices have pronounced effects on soil hydraulic properties immediately following tillage application, but these effects can diminish rapidly. Long-term effects on the order of a decade or more can appear less pronounced and are sometimes impossible to distinguish from natural and unaccounted management-induced variability. New standards for experimental classification are essential for isolating and subsequently generalizing space–time responses. Accordingly, enhanced methods of field measurement and data collection combined with explicit spatio-temporal modeling and parameter estimation should provide quantitative predictions of soil hydraulic behavior due to tillage and related agricultural management.     

Tillage intensity effects on soil properties and crop yields in a long-term trial on morainic loam soil in southeast Norway

Many tillage studies focus primarily on grain crops, whereas other important agricultural crops receive little attention. This paper presents yield results for various crops grown in the tenth to sixteenth year of a long-term tillage trial on loam soil in southeast Norway. Traditional plough tillage was compared with deep and shallow tine cultivation and with minimum tillage, and the residual effects of tillage were measured in the seventeenth and eighteenth years. Soil bulk density, air permeability and other soil conditions were found to be favourable for crop growth on all treatments in the tenth year. The yield levels of cereals (Hordeum vulgare L., Triticum aestivum L. and Avena sativa L.) and potatoes (Solanum tuberosum L.) showed consistent increases of 2–8% with declining tillage intensity, whereas yields of fodder beet (Beta vulgaris L.) were highest after plough tillage. The latter result was thought to be due to lower soil temperatures under reduced tillage. Yields of brassica crops were greatly affected by tillage intensity, owing to a marked reduction of clubroot (Plasmodiophora brassicae Wor.) infection with reduced tillage. Average yields for these crops were 23%, 52% and 59% higher with deep tine cultivation, shallow tine cultivation and minimum tillage, respectively, than with plough tillage. The effects were particularly dramatic in the case of fodder rape (Brassica napus L. ssp. oleifera Sinsk. f. biennis Reichb.) and cabbage (Brassica oleracea L. var. capita L.). Liming raised the yields of some brassica crops but did not influence the effect of tillage.

Soil acidity was measured twice during the trial period and again in the second residual year, and showed values which were 0.1–0.3 pH units lower with reduced tillage than with plough tillage. This rules out the conclusion that the effect of tillage on clubroot was associated directly with acidity. Positive residual effects of reduced tillage systems were found on the yields of both brassicaceous and gramineous crops. Reduced tillage intensity may thus be recommended for all crops studied, with the exception of fodder beet, on morainic loam soils of southeast Norway.     

Tillage and residue management effects on soil physical properties and rice yield in northwestern Himalayan soils

Field experiments were conducted on a silty clay loam (Typic Hapludalf) during 1988–1990 to study the effect of tillage practices, such as puddling (P), compaction (C) and non-puddled dry tillage (NP) with four rates of lantana (Lantana camara L.) residue incorporation (0(M₀), 10(M₁), 20(M₂) and 30 (M₃) t ha⁻¹), on soil physical properties and yield of rice. Greatest water retention was noticed under PM₃, followed by CM₃ and NPM₃. The soil penetration resistance was lowest for NPM₃, followed by PM₃ and CM₃. Puddled treatments either with or without residue impeded infiltration as compared with C and NP. Puddled treatments either with or without residue had higher soil as well as flood water temperature. Residue addition invariably reduced the ploughing energy required after rice harvest; however, among puddling and compaction treatments, puddling consumed less energy. The rice grain yields under puddled treatments were significantly higher than under C and NP irrespective of residue addition.     

Tillage systems for a cotton–peanut rotation with winter-annual grazing: Impacts on soil carbon, nitrogen and physical properties

Integrating livestock with cotton (Gossypium hirsutum L.) and peanut (Arachis hypogaea L.) production systems by grazing winter-annuals can offer additional income for producers provided it does not result in yield-limiting soil compaction. We conducted a 3-year field study on a Dothan loamy sand (fine-loamy, kaolinitic, thermic plinthic kandiudults) in southern Alabama, USA to determine the influence of tillage system prior to cotton–peanut planting on soil properties following winter-annual grazing. Two winter-annual forages [oat (Avena sativa L.) and annual ryegrass (Lolium mutiflorum L.)] and four tillage practices [chisel + disk, non-inversion deep tillage (paratill) with and without disking and no-till] were evaluated in a strip-plot design of four replications. We evaluated cone index, bulk density, infiltration, soil organic carbon (SOC), and total nitrogen (N). Paratilling prior to cotton or peanut planting, especially without surface soil tillage, reduced compaction initially to 40 cm and residually to 30 cm through the grazing period in winter. There were no significant differences in cone index, bulk density, or infiltration between forage species. No-tillage resulted in the greatest bulk density (1.65 Mg m⁻³) and lowest infiltration (36% of water applied), while paratilling increased infiltration in no-tillage to 83%. After 3 years, paratilling increased SOC 38% and N 56% near the soil surface (0–5 cm), as compared to concentrations at the beginning of the experiment, suggesting an improvement in soil quality. For coastal plain soils, integrating winter-annual grazing in a cotton–peanut rotation using a conservation tillage system of non-inversion deep tillage (paratill) with no surface tillage can improve soil quality by reducing cone index, increasing infiltration, and increasing SOC in the soil surface.     

Tillage methods and soil and water conservation in Australia

Tillage in Australia has evolved from ‘imported’ European practices to tillage systems more in tune with ‘older’ fragile soils and more severe climatic conditions. Cereal yields are commonly limited by water supply and the native fertility of many soils is poor. Crop/pasture rotations involving pasture legumes have been the mainstay of cereal production in the winter rainfall areas while production in much of the summer rainfall area has relied more on exploiting native fertility. Soil erosion and structural decline are still considered major issues facing long-term production. The general trend in tillage methods is for less tillage and greater retention of crop residues for soil and water conservation.

Tillage experiments have shown that management strategies involving retention of crop residues (stubble), reduced tillage and crop rotation can reduce erosion and improve yield. Results from experimentation are highly variable, both in magnitude and direction of responses to tillage treatments. Much of this variation is due to variation in seasonal conditions. Simulation models are being used to examine management options and to design experiments based on a knowledge of climate variability and physical and biological processes.     

Stratification of soil aggregation and organic matter under conservation tillage systems in Africa

Soil degradation due to tillage has been reported Africa-wide. Other main causes of soil degradation are overgrazing, extensive cultivation of marginal lands, widespread clearing of vegetation for agriculture, deforestation, exploitation of unsuitable agricultural technologies, mis-management of arable lands, and frequent drought. Hence, declining soil fertility and increasing population pressure on lands are fragile bases on which to build expectations for improved crop production. This paper recognizes conservation tillage systems as one means for preventing food shortages and natural resources degradation throughout the continent. Conservation tillage has the potential for increasing soil organic matter content and enhancing soil aggregation. Conservation tillage systems can create an aggregated, fertile surface layer that is important from a soil erosion reduction perspective and thus for a sustainable agriculture in Africa. Some indigenous tillage systems in Africa can be adapted to meet objectives of conservation tillage systems. Further, recent technological developments in tillage and seeding machinery will certainly enhance the rate of farmer’s acceptance and adoption of conservation tillage.