The Significance of Inoculum Standardization and Cell Density on the Cr(VI) Removal by Environmental Yeast Isolates

The influence of inoculum preparation and cell density on the efficiency of Cr(VI) removal was assessed with two chromate-resistant yeasts, Pichia jadinii M9 and Pichia anomala M10, isolated from textile wastewaters. Batch cultures in yeast nitrogen base (YNB)′ liquid medium (YNB without amino acids and ammonium sulfate plus sucrose and ammonium sulfate) containing 1-mM initial Cr(VI) concentrations revealed that heavy metal removal in both isolates was substantially affected by the inoculation procedure. Inocula with high initial density or pregrown in a nutritionally rich medium (Malt Czapek) were found to be key factors in order to achieve successful Cr(VI) decontamination. In contrast, low-density inocula and/or synthetic media-precultured cells were shown to negatively influence Cr(VI) disappearance, either by increasing the time for complete degradation or by reducing the percentage of heavy metal removed. These results emphasized the relevance of the selection of an appropriate inoculum culture medium and the positive influence of increasing one order of magnitude inoculum cell density in order to achieve successful and rapid Cr(VI) removal. Under these considerations, the selected yeasts, P. jadinii M9 and P. anomala M10, exhibited a remarkable ability to tolerate and completely remove Cr(VI) concentrations up to 1 mM, thus being candidates for potential applications in bioremediation of Cr(VI)-contaminated environments.     

The Monitoring of Cr(III) and Cr(VI) in Natural Water and Synthetic Solutions: An Assessment of the Performance of the Dgt and Dpc Methods

The technique of diffusive gradients in thin films or diffusive gradient in thin films (DGT) has been used in this work for the in situ measurement of labile Cr(III) and Cr(VI) species. Direct measurement of Cr(VI) was also carried out in parallel with a field-based colourimetric technique based on the EPA 7196 diphenyl-carbohydrazide (DPC) method. The efficiency of the DGT and DPC methods were tested (a) in the laboratory, using synthetic solutions in the presence of realistic concentrations of Cr, humic substances (HS), and ethylenediaminetetraacetic acid (EDTA), and (b) in the field, in river water affected by effluents discharged by the tannery industry. The main advantage of the DGT method is that it allows the in situ separation of labile species of Cr(III) and Cr(VI), though there are still uncertainties about its performance in field conditions. The DPC method proved to be a fast, accurate, and relatively economical option for the field-based determination of Cr(VI). Sample acidification and ageing of unacidified samples from contaminated aquatic environments, produced significant errors in the determination of ‘dissolved’ Cr. The concentration of Cr(VI) determined by either the DGT or the DPC method exceeds recommended international guidelines.     

Treatment of Cr(VI)-spiked soils using sulfur-based amendments

The objective of this research was to assess the hexavalent chromium (Cr(VI)) reducing efficiency of sulfur-based inorganic agents including calcium polysulfide (CPS), iron sulfide (FeS), pyrite (FeS₂) and sodium sulfide (Na₂S) in three soils. An alkaline soil (soil 1), a neutral soil (soil 2) and a slightly acid soil (soil 3) constituted the investigated soils. The soils were spiked with two levels of Cr(VI) (100 and 500 mg Cr(VI) kg^?1 soil) and incubated at field capacity (FC) for one month. Then, CPS, FeS, FeS₂ and Na₂S were added at 0, 5 and 10 g kg^?1 and the concentrations of exchangeable Cr(VI) were measured after 0.5, 4, 48 and 168 h in a batch experiment. The pH and organic carbon content of the soils played predominant role in Cr(VI) self-reduction by the soil itself. Complete self-reduction of Cr(VI) from soils 1, 2 and 3 was achieved at maximum Cr(VI) levels of 1, 50 and 500 mg kg^?1, respectively. Therefore, the concentration of Cr(VI) should not exceed the given levels in order to ensure that Cr(VI) is not released into the environment from contaminated sites. Moreover, decreasing pH in the alkaline soil caused significant increase of Cr(VI) reducing efficiency. Na₂S, CPS and FeS, in contrast to FeS₂, were efficient Cr(VI) reducing agents in all three soils. For all added amendments the following order of Cr(VI) reducing capacity was observed: Na₂S > CPS > FeS > FeS₂ in soil 1, Na₂S ? CPS ~ FeS > FeS₂ in soil 2 and Na₂S ? FeS > CPS ~ FeS₂ in soil 3.     

Development of Analytical Procedure for the Determination of Exchangeable Cr(VI) in Soils by Anion-exchange Fast Protein Liquid Chromatography with Electrothermal Atomic Absorption Spectrometry Detection

Analytical procedure for the determination of exchangeable Cr(VI) was developed. In order to optimise the extraction procedure, the efficiency of extraction of exchangeable Cr(VI) in soil samples was investigated in KH₂PO₄–K₂HPO₄ buffer solutions (0.015 up to 0.2 mol l^?1), adjusted to the pH of the soil. Phosphate buffer was used to efficiently desorb Cr(VI) from soil particles. The extraction time (mechanical shaking) ranged from 1 up to 72 h. Cr(VI) in soil extracts was determined by anion-exchange fast protein liquid chromatography with electrothermal atomic absorption detection (FPLC-ETAAS). The study was performed on soil samples from the field treated with the tannery waste for seventeen years. Samples were analysed in the 16 year after the last waste application. It was experimentally proven that the optimal phosphate buffer concentration was 0.1 mol l^?1 and extraction time 16 h. An additional experiment was done to confirm that during the extraction, soluble Cr(III) was not oxidised to Cr(VI) by Mn(IV) oxides present in soil samples. For this purpose soil with the same characteristics, but not treated with tannery waste, was spiked with Cr(III) and the analytical procedure performed. No measurable Cr(VI) concentrations were detected. The repeatability of measurement was 2.5%, while the reproducibility of measurement was 6.9%. The accuracy of the analytical procedure was tested by spiking of soil samples with Cr(VI). The recoveries were better than 95%. The analytical procedure with limit of detection (LOD) 15 ng g^?1 of Cr(VI) was sensitive enough for the determination of exchangeable Cr(VI) in soils. In field soil samples analysed the concentrations of exchangeable Cr(VI) were found to be about 200 ng g^?1.     

Evaluation of the Combined Cr(VI) Removal Capacity of Sawdust and Sawdust-Immobilized Acinetobacter haemolyticus Supplied with Brown Sugar

The purpose of this study is to evaluate the combined Cr(VI) removal capacities of nonliving (untreated rubber wood sawdust, URWS) and living biomass (URWS-immobilized Acinetobacter haemolyticus) in a continuous laboratory scale downward-flow two column system. Synthetic solutions of Cr(VI) between 237 and 320 mg L^?1 were mixed with 1 g L^?1 brown sugar in a nonsterile condition. Final Cr(VI) of between 0 and 1.6 mg L^?1 indicate a Cr(VI) removal capacity of 99.8–100%. The bacterial Cr(VI) reduction capacity increased with column length. This study shows the feasibility of using the two column system consisting of living (bacteria) and nonliving biomass (URWS) as a useful alternative treatment for Cr(VI) contamination in the aqueous system.     

Reduction of Cr(VI) by soil humic acids

The rate of hexavalent chromium reduction by a soil humic acid (SHA) was investigated in aqueous solutions where concentrations of Cr(VI), H⁺, and SHA were independently varied. Rate experiments were done with a large excess of SHA over Cr(VI). Rates of reduction depend strongly on [H⁺], increasing with decreasing pH. Typical Cr(VI)-SHA reactions display a nonlinear reduction of Cr(VI) with time that cannot be modelled with simple first- or second-order rate equations. An empirical rate equation is developed for Cr(VI)-soil humic acid reactions over a range of experimental conditions. The model is in part based on a reactive continuum concept developed for soil fulvic acids. The rate equation describing Cr(VI) reduction by SHA is: R= -(k₀+k[H⁺]^1/2)[HCrO₄^?]^1/2X_e^?1, where k₀ is (8·3 ± 1·2) × 10^?12, s^?1k is (2·04 ± 0·05) × 10^?9 l^1/2 mol^?1/2 s^?1, and X_e is the equivalent fraction of SHA oxidized. The rate equation adequately models Cr(VI) reduction in an experiment with [Cr(VI)]₀ four times greater than the maximum concentration used in its derivation. Cr(VI) reduction at pH 3 by two other SHAs can also be modelled using the rate equation. The difference between the rate coefficients for the humic acid and the fulvic acid from the same soil was greater than the difference in the rate coefficients for humic acids from different soils.     

Cr(III) oxidation coupled with Mn(II) bacterial oxidation in the environment

Purpose  

Cr(III) oxidation to Cr(VI) significantly increases Cr mobility and toxicity and thus its environmental risks. Manganese (Mn) oxides may serve as the potential oxidants of Cr(III) in environment. Natural Mn oxides in the environment are believed to be derived from bacterial oxidation. The objective of this study was to examine the Cr(III) oxidation capacity of biogenic Mn oxide and the role of Mn-oxidizing bacteria in Cr(III) oxidation.     

Organic Matter Effects on the Cr(VI) Removal Efficiency and Tolerance of <Emphasis Type="Italic">Typha domingensis</Emphasis>

The removal efficiency and tolerance of Typha domingensis to Cr(VI) in treatments with and without organic matter (OM) addition were evaluated in microcosm-scale wetlands. Studied Cr(VI) concentrations were 15 mg L^?1, 30 mg L^?1, and 100 mg L^?1, in treatments with and without OM addition, arranged in triplicate. Controls (without neither metal nor OM addition—without metal with OM addition) were disposed. Cr(VI) was removed efficiently from water in all treatments. OM addition enhanced significantly Cr(VI) and total Cr removals from water. In the treatments with OM addition, significantly higher Cr concentrations were found in sediment than the treatments without OM addition. Plants of the treatments without OM addition showed significantly higher Cr concentrations in tissues but lower biomass increase than the treatments with OM addition. The highest Cr concentrations in tissues were observed in submerged parts of leaves, followed by roots. According to SEM analysis, in the 100 mg L^?1 treatments, the highest Cr accumulation was observed in the epidermis of old leaves. Although Cr(VI) produced changes in root morphology, the OM addition favored the plant growth. In T. domingensis, root morphological plasticity is an important mechanism to improve metal tolerance and Cr uptake in wetland systems minimizing the environmental impact.     

Kinetic and Equilibrium Modeling for Cr(III) and Cr(VI) Removal from Aqueous Solutions by Citrus reticulata Waste Biomass

The pulp left after the extraction of juice from Citrus reticulate (kinnow), is a waste material, which was used as a potential sorbent for Cr(III) and Cr(VI) in the present study. The effect of experimental parameters such as pH, biosorbent dosage, biosorbent particle size, initial metal concentrations, temperature, shaking speed and sorption time on the Cr removal is apparent from the obtained results. The Freundlich isotherm and pseudo second order kinetic models fitted well to the data of Cr(III) and Cr(VI) biosorption by Citrus reticulata waste biomass. Effect of several pretreatments such as gases, natural coagulant and many other chemicals on Cr(III) and Cr(VI) sorption capacity of Citrus reticulata waste biomass was first time analyzed in the present study. The metal sorption capacity of Citrus reticulata waste biomass after a specific pretreatment was not only related to the nature of chemical but also strongly dependent on the oxidation state of the metal.     

Emerging resistant microbiota from an acidic soil exposed to toxicity of Cr, Cd and Pb is mainly influenced by the bioavailability of these metals

Purpose

The effect of pollutants in soil microorganisms is an important issue in order to understand their toxic effects in the environment, as well as for developing adequate bioremediation strategies. In this sense, the main objective of this study was to assess the involvement of the indigenous microbiota of an acidic forest Mediterranean soil by artificial pollution with heavy metals, and to detect and isolate resistant microorganisms that could be useful for bioremediation.

Materials and methods

Samples from a previously unpolluted acidic forest soil were amended with Cr(VI), Cd(II) or Pb(II) at total amounts ranging from 0.1 to 5,000 mg?kg^?1. These soil microcosms were incubated under controlled laboratory conditions for 28 days. Soluble fractions of metals were determined from aqueous extracts. Both activity and composition of the microbial community were assessed, respectively, by respirometric assays and molecular analysis (polymerase chain reaction denaturing gradient gel electrophoresis). The isolation of metal-resistant microorganisms was attempted by culture plating from microcosms incubated with high concentrations of metals. Isolated strains were tested in cultures with minimal medium to check for their metal resistance and their capacity to reduce the presence of toxic Cr(VI).

Results and discussion

A decrease in the soil respirometric activity and changes in the microbial community composition were detected from 10/100 mg?kg^?1 Cr and 1,000 mg?kg^?1 Cd and Pb. Presumably resistant bacterial and fungal populations developed in most of these polluted microcosms; however, the microbiota was severely impaired at the highest additions of Cr. Even though Cr was the most damaging metal in soil microcosms, if the soluble fractions of metals are considered instead of their total added amounts, the comparison among their toxic effects suggests a similar potential toxicity of Cr and Pb. Isolated multiresistant microorganisms were related mainly to Actinobacteria, Firmicutes and Ascomycota. Some of them showed the capacity to reduce Cr(VI) concentrations between 54 % and 70 % of the initial value. These strains were affiliated to several species of Streptomyces and Bacillus.

Conclusions

The combination of respirometric assays with molecular methods has been useful to assess the effect of metals on the soil microbial community, which can greatly be explained by their differential bioavailability. Cultivation-dependent and -independent approaches have proved the presence and development of multiresistant microorganisms in a previously unpolluted soil. Due to their properties, some of the isolated strains are potentially useful for soil bioremediation.     

Molecular characterization of chromium (VI) reducing potential in Gram positive bacteria isolated from contaminated sites

Hexavalent chromium [Cr(VI)] is highly toxic, teratogenic and carcinogenic to man and other animals. Some bacterial species have the ability to reduce Cr(VI) to a stable speciation state of trivalent chromium [Cr(III)], which is insoluble and comparatively less toxic. Therefore, the reduction of Cr(VI) thus provides potential as a means for environmental bioremediation of Cr(VI) pollution. In the present study bacteria isolated from chromium and diesel contaminated sites were found to have the ability to rapidly reduce highly toxic concentrations of Cr(VI) to Cr(III) when grown in minimal medium supplemented with glucose as the sole carbon source. Partial chromate reductase gene sequences were retrieved after PCR amplification of genomic DNA extracted from three Gram positive isolates which were highly similar (>99% sequence similarity) to chromate reductase genes found in Gram negative bacteria, more specifically those identified from Escherichia coli and Shigella spp. whole-genome studies. The isolated bacteria were putatively identified by 16S rRNA gene sequencing as Arthrobacter aurescens strain MM10, Bacillus atrophaeus strain MM20, and Rhodococcus erythropolis strain MM30.     

内源性土壤苏云金杆菌(BRC-ZYR2)对含氧铬还原的影响研究

Chromium（Cr） may cause losses in the yield of field plant, which is one of the favorite habitats of Bacillus thuringiensis（Bt）. The purposes of our study were to assess the Cr（VI）-resistance and Cr（VI）-reducing abilities of an indigenous soil isolate of Bt and to determine the factors governing Cr（VI） reduction. Towards this end a novel dichromate-reducing Bt BRC-ZYR2, characterized with insecticidal crystal proteins（ICPs）, was isolated from a uranium deposit. Minimum inhibitory concentrations（MICs） of Cr（VI） were determined by broth dilution method and the concentrations of Cr（VI） and total Cr in the supernatant were quantified colorimetrically using 1,5-diphenylcarbazide（DPC） reagent and a mixture of sulfuric-nitric acids, respectively. The isolate contained five ICP genes（cry1Ba, cry1 Bb, cry1Be/cry1 Bf, cry9 Ca and cry9Da） and exhibited a high level of Cr（VI） resistance with MICs of 150 mg L-1at pH 7.0 and 30？C, and 500 mg L-1under optimal conditions（pH 9.0 and 40？C）. The total Cr concentration was similar to initial concentration of Cr（VI） under the optimal condition, suggesting that the essential removal of the Cr（VI） was dependent on Bt reduction. Under optimal conditions, the initial Cr（VI） concentrations from 25 to 75 mg L-1significantly decreased in 24 h after incubation. Addition of Mn2＋, Co2＋, Mo2＋and Cu2＋activated Bt-mediated Cr（VI） reduction, while Zn2＋, Ni2＋and glucose were found to inhibit the reduction. Our results indicated that this isolate could be a promising biopesticide with the potential for both insect biocontrol and Cr bioremediation in the field.     

Intracellular chromium accumulation by <Emphasis Type="Italic">Streptomyces</Emphasis> sp. MC1

Streptomyces sp. MC1, previously isolated from sugar cane, has shown ability to reduce Cr(VI) in liquid minimal medium and soil samples. The objective of this work was to demonstrate the intracellular chromium accumulation by Streptomyces sp. MC1 under different culture conditions. This strain was able to accumulate up to 3.54 mg of Cr(III) per gram of wet biomass, reducing the 98% of Cr(VI) and removing 13.9% of chromium from the culture medium supernatants. Streptomyces sp. MC1 chromium bioaccumulation ability was corroborated by using Timm’s reagent technique, a low-cost method, which has been used by first time to detect chromium deposits in bacteria. The results of atomic absorption spectrometry, scanning electron microscopy, and energy dispersive X-ray analysis suggest that the mechanism of Cr(VI) resistance observed in Streptomyces sp. MC1 includes adsorption coupled with reduction to Cr(III), and finally, Cr(III) bioaccumulation. This mechanism have special relevance to remediation of Cr(VI) contaminated environments by Streptomyces sp. MC1.     

Stabilization of chromium(VI) by hydroxysulfate green rust in chromium(VI)-contaminated soils

Chromium (Cr)-contaminated soils pose a great environmental risk, with high solubility and persistent leaching of Cr(VI). In this study, hydroxysulfate green rust (GR_SO4), with the general formula Fe(II)₄Fe(III)₂(OH)₁₂SO₄·8H₂O, was evaluated for its efficiency in Cr(VI) stabilization via Cr(VI) reduction to Cr(III) in four representative Cr(VI)-spiked soils. The initial concentrations of phosphate buffer-extractable Cr(VI) (Cr(VI)_b) in soils 1, 2, 3, and 4 were 382.4, 575.9, 551.3, and 483.7 mg kg^-1, respectively. Reduction of Cr(VI) to Cr(III) by structural Fe(II) (Fe(II)_s) in GR_SO4 in all studied soils was fast, wherein the application of GR_SO4 markedly decreased the amount of Cr(VI)_b at the Cr(VI)_b/Fe(II)_s stoichiometric mole ratio of 0.33. The kinetics of Cr(VI) reduction by GR_SO4 could not be determined as this reaction coincided with the release of Cr(VI) from soil during the experiment. The concentration of Cr(VI)_b decreased, as the Cr(VI)_b/Fe(II)_s ratio decreased from 0.46 to 0.20, generally to below 10 mg kg^-1. Back-transformation of the generated Cr(III) was examined in the presence of manganese oxide birnessite at the birnessite/initial Cr(III) mole ratio of 4.5. The results of batch tests showed that only 5.2% of the initial Cr(III) was converted to Cr(VI) after two months, while under field capacity moisture conditions, less than 0.05% of the initial Cr(III) was oxidized to Cr(VI) after six months. The results illustrated that remediation of Cr(VI)-contaminated soils would be fast, successful, and irreversible with an appropriate quantity of fresh GR_SO4.     

Isolation and characterization of multi-potential Rhizobium strain ND2 and its plant growth-promoting activities under Cr(VI) stress

Soil contaminated by chromium (Cr) is a major concern for sustainable agriculture. Considering this as a basis, the present study was designed to isolate Cr(VI)-reducing and plant growth-promoting bacterial strain from contaminated sampling sources. In this study, Rhizobium strain ND2 was isolated from the root nodules of Phaseolus vulgaris grown in leather industrial effluent contaminated soil. The strain ND2 exhibited strong resistance to different heavy metals and reduced 30 and 50 µg ml^?1 concentrations of Cr(VI) completely after 80 and 120 h of incubation, respectively, as well as chromium adsorption and immobilization were confirmed by scanning electron microscopic equipped with energy X-ray spectroscopy. In addition, the strain produced 21.73 and 36.86 µg ml^?1 of indole-3-acetic acid at 50 and 100 µg ml^?1 of L-tryptophan supplimentations, respectively. Strain ND2 positively affected the exo-polysaccharide, ammonia, protease and catalase production and stimulated root length of various test crops under Cr(VI) stress. Moreover, Rhizobium strain ND2 has the potential to colonize the diverse agricultural crops. Thus, the present findings strongly suggested that the multipotential properties of ND2 could be exploited for bioremediation of contaminated sites with Cr(VI) as well as potential bio fertilizer for enhancing the agricultural productivity.     

Selective Determination of Chromium(VI) in Industrial Wastewater Samples by Micro-Electromembrane Extraction Combined with Electrothermal Atomic Absorption Spectrometry

This study describes application of free liquid membrane (FLM) in micro-electromembrane extraction (μ-EME) of Cr(VI) from wastewater samples. Amount of Cr(VI) was quantified by electrothermal atomic absorption spectrometry. The transportation of Cr(VI) across the FLM was explored by electrokinetic migration and ion-exchange process. FLM and acceptor solution types, pH of donor and acceptor solutions, applied electrical potential, as well as FLM thickness were optimized. Presence of an anion exchange carrier (methyl trialkyl-ammonium chloride, Aliquat 336) in FLM facilitated Cr(VI) transportation. The best performance was observed for 1-octanol (containing 5% Aliquat 336) with thickness of 1 mm used as FLM, under applied electrical potential of 75 V, when 0.5 M NaClO₄ and 0.1 M HCl were used as the acceptor and donor phases, respectively; and the extraction time was set to 5 min. Linearity was obtained in the working range of 0.5–14.0 ng mL^?1 Cr(VI) (R²?>?0.98). The calculated limit of detection was below 0.06 ng mL^?1. Application of this method to wastewater samples showed that relative recoveries of the spiked Cr(VI) in the samples were in the range of 73.8–85.1%, based on the standard addition method.     

Characterization of Reactive Red-120 Decolorizing Bacterial Strain Acinetobacter junii FA10 Capable of Simultaneous Removal of Azo Dyes and Hexavalent Chromium

Continual discharge of textile wastewaters loaded with a variety of synthetic dyes and metals is considered as a huge threat to surrounding ecosystems. In order to treat these undesirable pollutants, microbial bioremediation is considered as an efficient and economical technique. This study was conducted to evaluate the use of bacterial strains for simultaneous removal of azo dyes and hexavalent chromium [Cr(VI)]. Fifty-eight bacterial strains were isolated from Paharang drain wastewater and tested for their potential to decolorize reactive red-120 (RR-120) in the presence of 25 mg L^?1 of Cr(VI). Among the tested isolates, FA10 decolorized the RR-120 most efficiently and was identified as Acinetobacter junii strain FA10. Based on quadratic polynomial equation and response surfaces given by the response surface methodology (RSM), Cr concentration and pH were found to be the main factors governing the RR-120 decolorization by FA10. The strain FA10 also exhibited a substantial salt resistance since it showed a considerable decolorization of RR-120 even in the presence of 150 g L^?1 of NaCl. Moreover, the strain FA10 also showed the potential to simultaneously remove the Cr(VI) and the selected azo dyes in the same medium. More than 80 % of the initially added Cr(VI) was removed over 72 h of incubation along with the appreciable decolorization efficiency. The strain FA10 also exhibited good tolerance to considerable levels of different heavy metals. The findings of this study suggest that the strain FA10 might serve as an efficient bioresource to develop the biotechnological approaches for simultaneous removal of different azo dyes and heavy metals including Cr(VI).     

Role of Humic Substances on Cr(VI) Removal from Groundwater with Pyrite

Groundwater composition may have a pronounced impact on long-term performance of permeable reactive barriers (PRBs). Here, batch and column experiments were conducted to investigate the effects of humic acid (HA) on Cr(VI) removal by pyrite in systems containing cations such as Ca²⁺ and Mg²⁺. HA was observed to have inhibitory effect on Cr(VI) uptake by pyrite under the experimental conditions studied (e.g., pH 3 to 8). HA sorbed onto pyrite surface and thus (1) competed against Cr(VI) for pyritic surface sites and/or (2) increased electrostatic repulsion between Cr(VI) and pyrite. In systems with HA and Ca²⁺/Mg²⁺, the Cr(VI) uptake by pyrite decreased drastically relative to HA alone due to the aggregation of HA with Ca²⁺/Mg²⁺. The formation of such HA aggregates/precipitates blocked Cr(VI) ions to reach its binding sites, thereby resulting in a substantial decrease in Cr(VI) uptake. Overall, the results have major implications for proper design and operation of PRBs with pyrite as the reactive material.     

Hexavalent Chromium Removal by Candida sp. in a Concentric Draft-Tube Airlift Bioreactor

The main purpose of this work was to conduct a kinetic study on cell growth and hexavalent chromium [Cr(VI)] removal by Candida sp. FGSFEP in a concentric draft-tube airlift bioreactor. The yeast was batch-cultivated in a 5.2-l airlift bioreactor containing culture medium with an initial Cr(VI) concentration of 1.5 mM. The maximum specific growth rate of Candida sp. FGSFEP in the airlift bioreactor was 0.0244 h^?1, which was 71.83% higher than that obtained in flasks. The yeast strain was capable of reducing 1.5 mM Cr(VI) completely and exhibited a high volumetric rate [1.64 mg Cr(VI) l^?1 h^?1], specific rate [0.95 mg Cr(VI) g^?1 biomass h^?1] and capacity [44.38 mg Cr(VI) g^?1 biomass] of Cr(VI) reduction in the airlift bioreactor, with values higher than those obtained in flasks. Therefore, culture of Candida sp. FGSFEP in a concentric draft-tube airlift bioreactor could be a promising technological alternative for the aerobic treatment of Cr(VI)-contaminated industrial effluents.     

Removal of Pb(II), Cr(III) and Cr(VI) from Aqueous Solutions Using Alum-Derived Water Treatment Sludge

The sorption of Pb(II), Cr(III) and Cr(VI) from aqueous solution using alum-derived water treatment sludge was investigated using the batch adsorption technique. Samples of sludge from two separate water treatment plants were used (one where alum was used alone and one where it was used in combination with activated C). The sorption characteristics of the two samples were generally very similar. Sorption isotherm data for all three ions fitted equally well to both Freundlich and Langmuir equations. Maximum sorption capacity and indices of sorption intensity both followed the order: Cr(III)?>?Pb(II)?>?Cr(VI). Kinetic data correlated well with a pseudo-second-order kinetic model suggesting the process involved was chemisorption. Sorption was pH-dependant with percentage sorption of Cr(III) and Pb(II) increasing from <30% to 100% between pH?3 and 6 whilst that of Cr(VI) declined greatly between pH?5 and 8. HNO₃ at a concentration of 0.1?M was effective at removing sorbed Cr(III) and Pb(II) from the sludge surfaces and regeneration was successful for eight sorption/removal cycles. It was concluded that water treatment sludge is a suitable material from which to develop a low-cost adsorbent for removal of Cr and Pb from wastewater streams.