Photocatalytic Degradation of Textile Dye and Wastewater

In this study, the photocatalytic degradation of commercial azo dye (Remazol Red 133) in the presence of titanium dioxide (TiO₂) suspensions as photocatalyst was investigated. The effect of various operational parameters, such as pH of dye solution and catalyst concentration on the photocatalytic degradation process, was examined. The mineralization of dye was also evaluated by measuring the chemical oxygen demand of the dye solutions. The extent of photocatalytic degradation was found to increase with increasing TiO₂ concentration. For the Remazol Red dye solutions, a 120-min treatment resulted in 97.9% decolorization and 87.6% degradation at catalyst loading of 3 g/L. Experiments using real textile wastewater were also carried out. Textile wastewater degradation was enhanced at acidic conditions. The decolorization and degradation efficiencies for textile wastewater were 97.8% and 84.9% at pH 3.0, catalyst loading of 3 g/L, and treatment time of 120 min.     

Water Remediation by Columns Filled with Micelle–Vermiculite Systems

Photodegradation of four pharmaceuticals (i.e. carbamazepine, ibuprofen, ketoprofen and 17α-ethinylestradiol) in aqueous media was studied using a solar light simulator (Xe lamp irradiation) and sunlight experiments. These experiments were carried out in river and seawater and compared to distilled water. The latter was used to evaluate the direct photodegradation pathways. Irradiation time was up to 400 min and 24 days for the solar light simulator and sunlight assays, respectively. Pharmaceutical photodegradation followed a first-order kinetics and their half-lives calculated in every aqueous matrix. Moreover, the sensitizing effect of DOC was evaluated by comparison with the kinetics obtained in distilled waters. Ketoprofen was rapidly transformed via direct photolysis in all the waters under both sunlight (t _1/2?=?2.4 min) and simulated solar light simulator test (t _1/2?=?0.54 min). Under xenon lamp radiation, ibuprofen and 17α-ethinylestradiol were photodegraded at moderate rate with half-lives from 1 to 5 h. Finally, carbamazepine had the lowest photodegradation rate (t _1/2?=?8–39 h) attributable to indirect photodegradation. Indeed, its elimination was strongly dependent on the DOC concentration present in solution. Finally, several ketoprofen photoproducts were identified and plotted against solar light simulator irradiation time. Accordingly, the photodegradation pathway of ketoprofen was postulated.     

A Stable Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/Expanded Perlite Composite Catalyst for Degradation of Rhodamine B in Heterogeneous Photo-Fenton System

A stable and efficient Fe₂O₃/expanded perlite (Fe₂O₃-Ep) composite catalyst was synthesized by a simple hydrothermal method for degradation of refractory contaminants in heterogeneous photo-Fenton system. X-ray diffraction and FT-IR analyses confirmed the presence of the Fe₂O₃ in the synthesized catalyst. The catalytic activity of the Fe₂O₃-Ep catalyst was evaluated by the degradation of rhodamine B (RhB, 5 mg/L) and metronidazole (MET, 5 mg/L) in the presence of H₂O₂ under visible light irradiation. The Fe₂O₃-Ep catalyst exhibited high efficiency for degradation of RhB at a wide pH range from 2 to 10 and showed excellent catalytic property for decomposition of MET as well. The degradation ratio of RhB was achieved 99%, and the removal ratio of COD was 62% within 90 min at the best experimental conditions (0.5 g/L of Fe₂O₃-Ep catalyst, 2 mL/L of H₂O₂). Furthermore, iron leaching of the Fe₂O₃-Ep catalyst during the catalytic degradation reaction was negligible and the catalyst still exhibited high catalytic activity and stability after five cycles. These results show that the catalyst can be used as a highly efficient heterogeneous photo-Fenton catalyst for the degradation of non-biodegradable refractory pollutants in water.     

Efficient Photocatalytic Reduction of CO<Subscript>2</Subscript> Present in Seawater into Methanol over Cu/C-Co-Doped TiO<Subscript>2</Subscript> Nanocatalyst Under UV and Natural Sunlight

Photocatalytic reduction of CO₂ in seawater into chemical fuel, methanol (CH₃OH), was achieved over Cu/C-co-doped TiO₂ nanoparticles under UV and natural sunlight. Photocatalysts with different Cu loadings (0, 0.5, 1, 3, 5, and 7 wt%) were synthesized by the sol–gel method and were characterized by XRD, SEM, UV–Vis, FTIR, and XPS. Co-doping with C and Cu into TiO₂ remarkably promoted the photocatalytic production of CH₃OH. This improvement was attributed to lowering of bandgap energy, specific catalytic effect of Cu for CH₃OH formation, and the minimization of photo-generated carrier recombination. Co-doped TiO₂ with 3.0 wt% Cu was found to be the most active catalyst, giving a maximum methanol yield rate of 577 μmol g-cat^?1 h^?1 under illumination of UV light, which is 5.3-fold higher than the production rate over C-TiO₂ and 7.4 times the amount produced using Degussa P25 TiO₂. Under natural sunlight, the maximum rate of the photocatalytic production of CH₃OH using 3.0 wt% Cu/C-TiO₂ was found to be 188 μmol g-cat^?1 h^?1, which is 2.24 times higher than that of C-TiO₂, whereas, no CH₃OH was observed for P25.     

Biotreatment of Melanoidin-Containing Distillery Spent Wash Effluent by Free and Immobilized Aspergillus oryzae MTCC 7691

Humic acids (HA) are known as the precursors of carcinogenic compounds formed by the disinfection of drinking water. While conventional treatments were found to be inefficient HA removal processes in drinking water, advanced oxidation processes have been proven to have a significant effect in the treatment of HA. The degradation of HA was investigated using nano-sized zinc oxide (ZnO)/laponite composite (NZLC). The reactions occurred in a UVC reactor by considering following variables: pH, initial HA concentration, catalyst loading, addition of hydrogen peroxide (H₂O₂), and catalyst reuse. Water samples containing HA were analysed by ultraviolet/visible spectrophotometer and high-performance size-exclusion chromatography. Initial HA concentrations were tested by the Langmuir–Hinshelwood model with k and K _ads values, determined to be 0.126 mg/L.min and 0.0257 L/mg, respectively. The change in pH affected the HA degradation efficiency by the photocatalytic activity where it was higher under acidic conditions rather than alkaline ones. Optimal catalyst loading was proved to be a constrained factor in influencing the photocatalytic efficiency: the increase of catalyst concentration enhanced the HA decomposition efficiency up to an optimum value of 20 g/L, where there was no further degradation with excess loading. The addition of H₂O₂ was investigated through homogenous and heterogeneous photocatalysis, and, heterogeneous photocatalysis showed higher removal efficiency due to the combined effect of both catalysts and H₂O₂. Finally, NZLC was effective for reuse and exhibited an excellent stability after six times of usage.     

Speciation of Phosphorus and Cadmium in a Contaminated Soil Amended with Bone Char: Sequential Fractionations and XANES Spectroscopy

In this work, photocatalytic degradation of two reactive dyes, Reactive Yellow 84 (RY 84) and Reactive Black 5 (RB 5), on FeTiO₃/TiO₂ heterojunction in the presence of UV–visible radiation and H₂O₂ has been reported. FeTiO₃/TiO₂ heterojunction has been prepared from ilmenite FeTiO₃ and anatase TiO₂ by employing oxalic acid as an organic linker. FeTiO₃/TiO₂ ratios have been varied from 1 to 5 wt.%, and the materials were characterized by X-ray diffraction, scanning electron microscope and diffused reflectance UV–visible spectroscopic analysis. The photocatalytic activity of FeTiO₃/TiO₂ heterojunction for the degradation of the organic dyes RY 84 and RB 5 in the presence of UV–visible light was found to be higher than that of pure TiO₂. The addition of H₂O₂ increases the rate of degradation of both dyes on FeTiO₃/TiO₂ heterojunction. It facilitates the fast degradation of dye solutions even when their concentration was above 100 mg/l, which is otherwise very slow due to the low transmittance of light by the dye solution. The extent of mineralisation of the reactive dye during photocatalytic degradation was estimated from chemical oxygen demand analysis. FeTiO₃/TiO₂ heterojunction photocatalyst was also found to have good photostability; the material retains almost 97 % of its initial activity even in the fifth cycle.     

The Oxidation of Di-(2-Ethylhexyl) Phthalate (DEHP) in Aqueous Solution by UV/H2O2 Photolysis

The oxidation of di-(2-ethylhexyl) phthalate (DEHP) in solution using UV/H₂O₂ and direct UV photolysis are analyzed in this study. It was found that DEHP was 100% removal in the solution by 180-min UV/H₂O₂ treatment and 73.5% removal by 180-min direct UV photolysis. The effect of different factors, such as DEHP concentration, H₂O₂ concentration, and UV light intensity, on photochemical degradation was investigated. The degradation mechanism of DEHP and the acute toxicity of intermediates were also studied. The photochemical degradation process was found to follow pseudo-first-order kinetics. The results of our study suggested that the concentration with 40 mg/L H₂O₂ and 5 μg/mL DEHP in the solution at pH 7 with 10.0?×?10^?6 Einstein l^?1?s^?1 UV was the optimal condition for the photochemical degradation of DEHP. The photochemical degradation with UV/H₂O₂ can be an efficient method to remove DEHP in wastewater.     

Degradation of Leather Dye Using CeO2–SnO2 Nanocomposite as Photocatalyst Under Sunlight

Nanocomposite of CeO₂?CSnO₂ containing different CeO₂ contents was prepared by coprecipitation process. The material obtained was characterized by X-ray diffraction and N₂ adsorption?Cdesorption isotherms. Its photocatalytic activity was tested in the degradation of azo dye of leather, Direct Black 38, in aqueous solution under sunlight. The photocatalytic activity of the coupled CeO₂?CSnO₂ oxide ranged depending on the CeO₂ contents. The optimum amount of CeO₂ for the synthesis of CeO₂?CSnO₂ was 7?wt.% since the nanoparticles showed high photocatalytic activity in the degradation of the dye, similar to that of the TiO₂?CP25 photocatalyst. The kinetics of photocatalytic degradation and total organic carbon removal under sunlight were found to follow a first-order rate law. The results indicated that CeO₂?CSnO₂ can be used for the removal of dyes from wastewater.     

Visible-Light-Induced Photocatalytic Degradation of PAH-Contaminated Soil and Their Pathways by Fe-Doped TiO<Subscript>2</Subscript> Nanocatalyst

The aim of the present study was to establish the photocatalytic efficiency of Fe-doped TiO₂ nanocatalysts toward polycyclic aromatic hydrocarbons (PAHs), which were phenanthrene, anthracene, and fluoranthene, contaminated soil under visible irradiation. The morphology, phase, and particle size of the prepared nanocatalyst have been studied as a first mention in literature. The photoresponse of the TiO₂ extends from UV region to the visible region was proved by the diffuse reflectance spectrophotometry (DRS). The surface area is greatly increased though the Fe-doped TiO₂ compared with the bare TiO₂. The pH value of the media showed the beneficial to PAH absorption on the Fe-doped TiO₂ under the alkaline condition due to the surface catalyst possesses much negative charge, which is increase in percentage of PAH degradation. Based on GC-MS study, the mechanism of photoactivity of the selected PAHs involves hydroxylation, ring opening, and rearrangement reactions. The main intermediates of PAH photodegradation were found to be 9-octadecanoic acid, heptadecane, octadecane, cyclohexane (1-hexadecylheptadecyl), and 15-hydroxypentadecanoic acid.     

Synthesis of APTMS-Functionalized SiO2/TiO2 Transparent Film Using Peroxo Titanic Acid Refluxed Solution for Formaldehyde Removal

Amine-functionalized SiO₂/TiO₂ photocatalytic films have been synthesized using the peroxo titanic acid (PTA) approach coupled with the sol-gel dip-coating method. The 3-aminopropyl-trimethoxysilane (APTMS) and methyltrimethoxysilane (MTMOS) were employed as the amine functional groups and silica precursor. The effects of the ratio of APTMS/MTMOS, PTA refluxed time, and pH of prepared sol on the characteristics and the formaldehyde degradation efficiency were investigated. Physicochemical properties of prepared photocatalysts were characterized with nitrogen adsorption–desorption isotherm measurement, SEM, X-ray diffraction (XRD), UV-vis spectrophotometer, and Fourier transform infrared (FTIR) spectroscopy. The XRD and FTIR results indicated that the obtained photocatalysts consisted of –NH₂ groups, SiO₂, and anatase TiO₂. The photocatalytic films showed high transmittance of 80–90% in the visible light region. The obtained film prepared with the APTMS/MTMOS ratio of 0.03, pH of 1.8, and 10 h of refluxed time possessed high specific surface area (604.0 m² g^?1) and 85% formaldehyde degradation efficiency. The enhancement of formaldehyde degradation efficiency was observed when increasing the PTA refluxed time. The repeatability of photocatalytic film was also tested, and the degradation efficiency was 92.0% of initial efficiency after seven cycles.     

Photo-Degradation of Some Dyes using Ag-Loaded Titaniumdioxide

The photocatalytic degradation of organic dyes using TiO₂ andsilver-loaded TiO₂ has beenstudied. The dyes which were chosen (methyl violet, a cationicdye; Cibacron Blue FMR, areactive dye; and Maxilon Red GRL, a mono azo basic dye)represent the major structuralfamilies of organic dyes. Ag-loading dramatically reduceddegradation time. While theundoped TiO₂ degraded about 63% of the total amount ofmethyl violet within 4 min,degradation rose to 95% with Ag-loaded TiO₂ within the sametime period. The photo-decomposition of dyes was monitored as a function of pH anddissolved organic and inorganic matters.     

Degradation of Hazardous Dyes in Wastewater using Nanometer Mixed Crystal TiO2 Powders under Visible Light Irradiation

The partial phase transformation of nanometer TiO₂ powder from anatase phase to rutile phase was realized by heat-treatment and a new TiO₂ photocatalyst which could be excited by visible light was obtained. The heat-treated TiO₂ powder at different stage of transition crystal was characterized and monitored by XRD, TEM, FT-IR and UV–vis DRS methods. The test of photocatalytic activity of the heat-treated TiO₂ powder was carried out by the photocatalytic degradation of rhodamine B and acid orange II dyes, respectively, in aqueous solution under visible light irradiation. The results indicate that the nanometer TiO₂ photocatalyst heat-treated at 500°C for 60 min shows the highest photocatalytic activity, that is, it can effectively degrade the rhodamine B and acid orange II under visible light irradiation. The remarkable improvement of photocatalytic activity of heat-treated TiO₂ powder at 500°C for 60 min was mainly illustrated by the formation of special interphase between rutile and anatase phases, which not only restrains the recombination of photogenerated electrons and holes, but also reduces the adsorbability of nanometer anatase TiO₂ powder properly for various dyes. Additionally, the effects of dye-assisting chemicals such as Na₂CO₃ and NaCl on the photocatalytic degradation were also studied.     

Photocatalytic Degradation of Herbicide Quinmerac in Various Types of Natural Water

The efficiency of the photocatalytic degradation of the herbicide quinmerac in aqueous TiO₂ suspensions was examined as a function of the type of light source, TiO₂ loading, pH, temperature, electron acceptors, and hydroxyl radical (^?OH) scavenger. The optimum loading of catalyst was found to be 0.25?mg?mL^?1 under UV light at pH?7.2, with the apparent activation energy of the reaction being 13.7?kJ?mol^?1. In the first stage of the reaction, the photocatalytic degradation of quinmerac (50???M) followed approximately a pseudo-first order kinetics. The most efficient electron acceptor appeared to be H₂O₂ along with molecular oxygen. By studying the effect of ethanol as an ^?OH scavenger, it was shown that the heterogeneous catalysis takes place mainly via ^?OH. The results also showed that the disappearance of quinmerac led to the formation of a number of organic intermediates and ionic byproducts, whereas its complete mineralization occurred in about 120?min. The reaction intermediates (7-chloro-3-methylquinoline-5,8-dione, three isomeric phenols hydroxy-7-chloro-3-methylquinoline-8-carboxylic acids, and 7-chloro-3-(hydroxymethyl)quinoline-8-carboxylic acid) were identified and the kinetics of their appearance/disappearance was followed by LC?CESI?CMS/MS. Tentative photodegradation pathways were proposed and discussed. The study also encompassed the effect of quality of natural water on the rate of removal of quinmerac.     

Photodegradation of Bisphenol A with ZnO and TiO<Subscript>2</Subscript>: Influence of Metal Ions and Fenton Process

In this study, photocatalytic degradation of bisphenol A (BPA) was investigated using two types of catalysts (TiO₂ and ZnO) with various metal ion concentrations and amounts of added H₂O_2. A kinetic test was performed to observe the changes of BPA over time under UV irradiation in a photocatalytic reactor. Experimental results demonstrated that degradation efficiency of ZnO was higher than that of TiO₂. The degradation rate increased as catalyst dosage increased until reaching optimum dosage, after which degradation rate decreased. The addition of H₂O₂ improved the degradation efficiency of BPA, with the degradation efficiency increasing with the amount of H₂O₂. All metal ions, including Fe²⁺, Ni²⁺, and Cu²⁺, inhibited the degradation of BPA by ZnO at natural pH, whereas Fe²⁺ and Ni²⁺ enhanced degradation efficiency of BPA at acidic pH. Comparison of BPA degradation with H₂O₂ only, ZnO/H₂O₂, Fe²⁺/H₂O₂, and ZnO/Fe²⁺/H₂O₂ revealed that Fe²⁺/H₂O₂ was more efficient than other processes at lower pH (pH?=?3.44), whereas ZnO/H₂O₂ the most efficient at higher pH (pH?=?6.44). These results indicate that ZnO/H₂O₂ process was observed to be the most efficient of all processes. Degradation efficiency of BPA by ZnO was also influenced by additional parameters, including H₂O₂ concentration, metal ions, and solution pH.     

Pb(II) Removal Using TiO<Subscript>2</Subscript>-Embedded Monolith Composite Cryogel as an Alternative Wastewater Treatment Method

Different from direct application of free nanoparticles (NPs) in water treatment, a composite material is used to reduce the release and potential toxic effects of NPs with maintained adsorption capacity and kinetics. Novel monolithic composites with TiO₂ NPs incorporated into the walls of macroporous cryogels were synthesized and evaluated for material characteristics and their efficiency for removal of Pb(II) from aqueous solution in batch test and continuous mode. The uniformly distributed 6% TiO₂-cryogel is shown to be optimal for minimizing TiO₂ NP losses while maximizing Pb(II) removal. Under (25.0 ± 0.1) °C with the initial Pb(II) concentration of 10 mg/l, TiO₂-cryogels exhibit excellent adsorption characteristic for Pb(II) removal with adsorption capacity up to 23.27 mg/g TiO₂, which is even a little higher than that of TiO₂ NPs (21.58 mg/g TiO₂), and the results fit well with Langmuir–Freundlich isotherm. Both adsorbents work well in higher pH range with the highest removal rate at pH 6 for TiO₂-cryogel, and the adsorption mechanism might be strong chemical interaction. Pseudo-second-order process can better describe the adsorption process rather than pseudo-first-order for both adsorbents. The external mass transfer process of Pb(II) on TiO₂ NPs is much faster than that on TiO₂-cryogel, and the ultimate equilibrium time is about the same (3 h) on both adsorbents. The synthesized composites could also withstand a continuous treatment, and the effect of competing and co-existing constituents such as Cd²⁺, SO₄ ^2? and dissolved organic matter (DOM) is almost negligible. The composite design with small particles embedded into cryogels is proved to successfully keep the adsorption activity of TiO₂ NPs and prevent them from releasing into the environment in engineering practice.     

TiO2纳米粒子气固相光催化降解乙烯初探

该文对TiO₂纳米粒子气固光催化降解果蔬贮藏环境乙烯技术进行了初步研究。采用溶胶-凝胶法制备的纳米TiO₂薄膜作光催化剂，利用自行设计的气固光催化实验系统，研究了乙烯浓度、紫外光作用时间对光催化降解反应的影响，探讨了乙烯的光催化降解的动力学。结果显示：该研究所制备的TiO₂锐钛矿型含量为48.766%，比表面积为47.186 m²/g，具有良好的光催化性能；光催化降解乙烯比直接紫外线光降解效果显著，光照10 min时光催化乙烯降解率比直接紫外线光降解提高23.76%；乙烯的降解率随着其浓度的增加而降低；乙烯的光催化降解的动力学可以用Langmuir-Hinshelwood动力学方程加以描述。     

Visible-Light-Driven Photocatalytic N-Doped TiO<Subscript>2</Subscript> for Degradation of Bisphenol A (BPA) and Reactive Black 5 (RB5) Dye

Bisphenol A (BPA) and reactive black 5 (RB5) dye are among the most persistent and non-biodegradable contaminants in water which require an urgent need for the development of effective removal method. The ubiquitous existence of both contaminants could interfere with the human health and aquatic environmental balance. Photocatalytic process as one of advanced oxidation processes (AOPs) has shown high performance for degradation of organic compounds to the harmless materials under sensible condition. Therefore, this study aims to develop a visible-light-driven photocatalyst that can efficiently degrade BPA and RB5 present in household water. N-doped TiO₂ were successfully synthesized via simple and direct sol–gel method. The prepared TiO₂ nanoparticles were characterized by field emission scanning microscope (FE-SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and Brunauere Emmette Teller (BET) analysis. The incorporation of nitrogen in TiO₂ lattice exhibited excellent optical responses to visible region as revealed by UV–Vis–NIR spectroscopy absorption capability at 400–600 nm. The photocatalytic activity of the N-doped TiO₂ nanoparticles was measured by photocatalytic degradation of BPA and RB5 in an aqueous solution under visible-light irradiations. Degradation of BPA and RB5 was 91.3% and 89.1%, respectively after 360 min illumination. The degradation of BPA and RB5 by N-doped TiO₂ was increased up to 89.8% and 88.4%, respectively under visible-light irradiation as compared to commercial TiO₂ P25. This finding clearly shows that N-doped TiO₂ exhibits excellent photocatalytic degradation of BPA and RB5 under visible irradiation, hence have a promising potential in removing various recalcitrant contaminants for water treatment to fulfill the public need to consume clean water.

Open image in new window

Graphical Abstract ?

     

Degradation of Di-(2-ethylhexyl) Phthalate (DEHP) by TiO2 Photocatalysis

The photocatalytic degradation of di-(2-ethylhexyl) phthalate (DEHP) in solution using titanium dioxide (TiO₂) was analyzed in this study. It was found that DEHP was completely removed in the solution after 150 min irradiation. The effect of different factors, such as photocatalyst amount, DEHP concentration, light intensity, pH, and temperature on photocatalytic degradation was investigated. The degradation mechanism of DEHP with proton and hydroxyl radicals oxidation were also studied. It is suggested that either ethylhexyl or ester chain scissions of the aliphatic part of DEHP was the dominant degradation mechanism of the process. The photocatalytic degradation process was well described by first-order reaction. The final mineralization product was carbon dioxide and the intermediate products were identified by GC-MS. Thus, the photocatalytic degradation treatment of DEHP in wastewater is a relative simple and fast method.     

Organics Wastewater Degradation by a Mesoporous Chromium-Functionalized γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> with H<Subscript>2</Subscript>O<Subscript>2</Subscript> Assistance

In this study, a mesoporous chromium-functionalized γ-Al₂O₃ (Cr/γ-Al₂O₃) catalyst was prepared by an impregnation method, and the catalytic activity was evaluated by the degradation of organics wastewater. The prepared catalyst was characterized by X-ray photoelectron spectroscopy, X-ray diffraction, nitrogen adsorption-desorption experiments, and scanning electron microscopy. The characterization results confirmed that the pores in the Cr/γ-Al₂O₃ catalyst distributed broadly in the mesoporous region, and the active chromium species were highly dispersed on the catalyst surface. The catalytic activity tests showed that the Cr/γ-Al₂O₃ catalyst exhibited a superior performance for the degradation of organics wastewater with H₂O₂ assistance. And the methylene blue (MB) disappeared within 20 min and the COD removal reached 76.5% within 40 min for the MB-simulated wastewater; for the phenol-simulated wastewater, the phenol removal was above 95% and the corresponding COD removal reached 71% within 40 min. Such an excellent catalytic performance demonstrates that the Cr/γ-Al₂O₃ catalyst has a potential application in the degradation of complex organics wastewater simultaneously.     

Photocatalytic Removal of the Antibiotic Cefotaxime on TiO<Subscript>2</Subscript> and ZnO Suspensions Under Simulated Sunlight Radiation

This study presents the main results about the removal of the antibiotic cefotaxime (CTX) under simulated sunlight radiation using heterogeneous photocatalysis with titanium dioxide (TiO₂) and zinc oxide (ZnO) in aqueous solutions. The effects of pH and catalyst initial load on pollutant removal were assessed considering the response surface methodology and a central composite circumscribed experimental design, which allowed to determine the optimized conditions that lead to a higher substrate elimination. Experimental results indicated that evaluated parameters have a significant effect on antibiotic removal in both TiO₂ and ZnO suspensions. In addition, the role of photogenerated holes, hydroxyl, and superoxide anion radicals on CTX degradation was evaluated to clarify the reaction mechanism. Finally, analysis of the dissolved organic carbon content in solutions and the antibacterial activity of treated samples showed that photocatalytic treatments were able to reduce a considerable portion of the organic matter present in the systems and its antimicrobial activity.