Comparison of Physicochemical Properties and Structures of Sugary‐2 Cornstarch with Normal and Waxy Cultivars

Starches from normal, waxy, and sugary‐2 (su2) corn kernels were isolated, and their structures and properties determined. The total lipid contents of normal, waxy, and su2 corn starches were 0.84, 0.00, and 1.61%, respectively. Scanning electron micrographs showed that normal and waxy corn starch granules were spherical or angular in shape with smooth surfaces. The su2 starch granules consisted of lobes that resembled starch mutants deficient in soluble starch synthases. Normal and waxy corn starches displayed A‐type X‐ray patterns. The su2 starch showed a weak A‐type pattern. The chain‐length distributions of normal, waxy, and su2 debranched amylopectins showed the first peak chain length at DP (degree of polymerization) 13, 14, and 13, respectively; second peak chain length at DP 45, 49, and 49, respectively; and highest detectable DP of 80, 72, and 76, respectively. The su2 amylopectin showed a higher percentage of chains with DP 6–12 (22.2%) than normal (15.0%) and waxy (14.6%) amylopectins. The absolute amylose content of normal, waxy, and su2 starches was 18.8, 0.0, and 27.3%, respectively. Gel‐permeation profiles of su2 corn starch displayed a considerable amount of intermediate components. The su2 corn starch displayed lower gelatinization temperature, enthalpy change, and viscosity; a significantly higher enthalpy change for melting of amylose‐lipid complex; and lower melting temperature and enthalpy change for retrograded starch than did normal and waxy corn starches. The initial rate of hydrolysis (3 hr) of the corn starches followed the order su2 > waxy > normal corn. Waxy and su2 starches were hydrolyzed to the same extent, which was higher than normal starch after a 72‐hr hydrolysis period.     

Two- and multi-step annealing of cereal starches in relation to gelatinization

Two- and multi-step annealing experiments were designed to determine how much gelatinization temperature of waxy rice, waxy barley, and wheat starches could be increased without causing a decrease in gelatinization enthalpy or a decline in X-ray crystallinity. A mixture of starch and excess water was heated in a differential scanning calorimeter (DSC) pan to a specific temperature and maintained there for 0.5-48 h. The experimental approach was first to anneal a starch at a low temperature so that the gelatinization temperature of the starch was increased without causing a decrease in gelatinization enthalpy. The annealing temperature was then raised, but still was kept below the onset gelatinization temperature of the previously annealed starch. When a second- or third-step annealing temperature was high enough, it caused a decrease in crystallinity, even though the holding temperature remained below the onset gelatinization temperature of the previously annealed starch. These results support that gelatinization is a nonequilibrium process and that dissociation of double helices is driven by the swelling of amorphous regions. Small-scale starch slurry annealing was also performed and confirmed the annealing results conducted in DSC pans. A three-phase model of a starch granule, a mobile amorphous phase, a rigid amorphous phase, and a crystalline phase, was used to interpret the annealing results. Annealing seems to be an interplay between a more efficient packing of crystallites in starch granules and swelling of plasticized amorphous regions. There is always a temperature ceiling that can be used to anneal a starch without causing a decrease in crystallinity. That temperature ceiling is starch-specific, dependent on the structure of a starch, and is lower than the original onset gelatinization of a starch.     

Morphological,Structural, and Thermal Properties of Starch Nanocrystals Affected by Different Botanic Origins

Six types of starch nanocrystals were prepared from corn, barley, potato, tapioca, chickpea, and mungbean starches with an acid hydrolysis method. The yields and morphological, structural, and thermal properties of starch nanocrystals were characterized. Starch nanocrystals had yields ranging from 8.8 to 35.7%, depending on botanical origin. During acid hydrolysis, amylose was effectively degraded, and no amylose was detected in any starch nanocrystal. Shape and size of native starch granules varied between starches, whereas there was no obvious difference in shape among different types of starch nanocrystals. The average particle size of starch nanocrystals was mainly related to crystalline type of native starches. Compared with their native starch counterparts, changes in crystalline diffraction patterns of starch nanocrystals depended on the original botanical source and crystalline structure. Degree of crystallinity, melting temperature, and enthalpy of starch nanocrystals increased, whereas their thermal decomposition temperature decreased. Of six produced starch nanocrystals, potato starch nanocrystal had the lowest yield, degree of crystallinity, and onset and melting temperatures, the largest particle size, and obvious changes in crystalline diffraction pattern.     

Starch Granule Size Distribution from Seven Wheat Cultivars Under Different Water Regimes

Seven wheat cultivars with different starch contents were used as materials to investigate the distribution of grain starch granule size under irrigated and rainfed conditions. In mature grains, the diameter of starch granules was 0.37–52.6 μm, and the percent volume distribution showed a two‐peak curve with the mean particle diameter of 5 (B‐type) and 25 μm (A‐type) at each peak. The volume percentages of A‐ and B‐types were 52.7–65.5% and 34.5–47.3%, respectively. A two‐peak curve is also shown in percent surface area distribution of starch granules, but only one peak in percent number. Both irrigated and rainfed conditions had a significant effect on the starch granule size distribution of the seven cultivars. As compared with irrigated treatment, rainfed treatment affected the distribution of starch granules in grains of all cultivars through increasing the volume percentage and surface area percentage of 2–9.8 and <9.8 μm starch granules and decreasing those of >9.8 and >18.8 μm starch granules. The soil water deficit also decreased the contents of amylose and starch in grains and increased protein content, indicating that different water regimes had an evident effect on grain quality. According to correlation coefficients (r), the contents of amylose, starch, and protein in grains was significantly correlated with the volume percentage of starch granules with different diameter ranges.     

Physicochemical and Thermal Characteristics of Starch Isolated from a Waxy Wheat Genotype Exhibiting Partial Expression of Wx Proteins

A unique wheat genotype carrying waxy‐type allelic composition at the Wx loci, Gunji‐1, was developed, and its starch properties were evaluated in comparison to parental waxy and wild‐type wheat varieties. Gunji‐1 was null in all three of the Wx genes but exhibited a lower level of Wx proteins than the wild‐type. Starch amylose content and cold water retention capacity were 10.1 and 70.5% for Gunji‐1, 4.2 and 76.6% for waxy, and 27.9 and 65.0% for wild‐type, respectively. No significant differences were observed in microstructure, granule size distribution, and X‐ray diffractograms of the starch granules isolated from Gunji‐1 compared with those of waxy and wild‐type wheat varieties. Starch pasting peak, breakdown, and setback viscosities and peak temperature of Gunji‐1 were intermediate between waxy and wild‐type wheat. In starch gel hardness, Gunji‐1 (1.1 N) was more similar to waxy wheat (0.5 N) than to the wild‐type variety (17.6 N). Swelling power, swelling volume, paste transmittance during storage, and gelatinization enthalpy of Gunji‐1 were lower than those of waxy wheat but greater than those of wild‐type wheat. Retrogradation of starch stored for one week at 4°C expressed with DSC endothermic enthalpy was absent in the waxy wheat variety, whereas Gunji‐1 exhibited both retrogradation of amylopectin and amylose‐lipid complex melting similar to the wild‐type parent, even though enthalpies of Gunji‐1 were much smaller than the wild‐type parent.     

Utilization of Hydroxypropylated Waxy Rice and Corn Starches in Korean Waxy Rice Cake to Retard Retrogradation

A traditional waxy rice gel cake in Korea, Injulmi, was prepared with hydroxypropylated waxy rice and corn starches (molar substitutions 0.13 and 0.11, respectively), and the textural and retrogradation characteristics of the cake were compared with a conventional cake made of waxy rice flour. In the pasting viscogram, hydroxypropylated starches exhibited reduced pasting temperatures, but increased peak viscosities compared with the unmodified starches. Under differential scanning calorimetry, the T_g′ and ice melting enthalpy of the starch gel cakes were reduced by hydroxypropylation, which indicated that the modified starches had higher water‐holding capacity than the unmodified starches. The degree of retrogradation, as measured by the hardness of the gel cake and the melting enthalpy, was significantly reduced by hydroxypropylation and hydroxypropylated waxy rice starch was more effective in retarding the retrogradation than hydroxypropylated waxy corn starch     

Barley grain constituents, starch composition, and structure affect starch in vitro enzymatic hydrolysis

The relationship between starch physical properties and enzymatic hydrolysis was determined using ten different hulless barley genotypes with variable carbohydrate composition. The ten barley genotypes included one normal starch (CDC McGwire), three increased amylose starches (SH99250, SH99073, and SB94893), and six waxy starches (CDC Alamo, CDC Fibar, CDC Candle, Waxy Betzes, CDC Rattan, and SB94912). Total starch concentration positively influenced thousand grain weight (TGW) (r(2) = 0.70, p < 0.05). Increase in grain protein concentration was not only related to total starch concentration (r(2) = -0.80, p < 0.01) but also affected enzymatic hydrolysis of pure starch (r(2) = -0.67, p < 0.01). However, an increase in amylopectin unit chain length between DP 12-18 (F-II) was detrimental to starch concentration (r(2) = 0.46, p < 0.01). Amylose concentration influenced granule size distribution with increased amylose genotypes showing highly reduced volume percentage of very small C-granules (<5 μm diameter) and significantly increased (r(2) = 0.83, p < 0.01) medium sized B granules (5-15 μm diameter). Amylose affected smaller (F-I) and larger (F-III) amylopectin chains in opposite ways. Increased amylose concentration positively influenced the F-III (DP 19-36) fraction of longer DP amylopectin chains (DP 19-36) which was associated with resistant starch (RS) in meal and pure starch samples. The rate of starch hydrolysis was high in pure starch samples as compared to meal samples. Enzymatic hydrolysis rate both in meal and pure starch samples followed the order waxy > normal > increased amylose. Rapidly digestible starch (RDS) increased with a decrease in amylose concentration. Atomic force microscopy (AFM) analysis revealed a higher polydispersity index of amylose in CDC McGwire and increased amylose genotypes which could contribute to their reduced enzymatic hydrolysis, compared to waxy starch genotypes. Increased β-glucan and dietary fiber concentration also reduced the enzymatic hydrolysis of meal samples. An average linkage cluster analysis dendrogram revealed that variation in amylose concentration significantly (p < 0.01) influenced resistant starch concentration in meal and pure starch samples. RS is also associated with B-type granules (5-15 μm) and the amylopectin F-III (19-36 DP) fraction. In conclusion, the results suggest that barley genotype SH99250 with less decrease in grain weight in comparison to that of other increased amylose genotypes (SH99073 and SH94893) could be a promising genotype to develop cultivars with increased amylose grain starch without compromising grain weight and yield.     

Comparative study of the retrogradation of intermediate water content waxy maize, wheat, and potato starches

The retrogradation of extruded starches from three different botanical sources was studied in concentrated conditions (34 +/- 1% water) at 25 degrees C using differential scanning calorimetry (DSC) and isothermal calorimetry, Fourier transform infrared spectroscopy (FTIR), and wide-angle X-ray scattering. Potato starch showed the highest rate of retrogradation (approximately 0.17 h(-1)) followed by waxy maize (approximately 0.12 h(-1)), while the retrogradation of wheat starch was the slowest (approximately 0.05 h(-1)). In addition to the kinetics, the extent of molecular order in the retrograded samples was studied in detail in terms of "short-range" (helical) and "long-range" (crystalline) distance scales. The amylopectin crystallinity indices were essentially the same (approximately 47-51% amylopectin basis) for the three starches. However, significant differences were found in the enthalpy of melting measured by DSC after "full" retrogradation (potato, 11.6 +/- 0.7; waxy maize, 9.0 +/- 0.5; and wheat, 6.1 +/- 0.3 J/g of amylopectin). The degree of short-range molecular order in the retrograded state determined by FTIR was waxy maize > potato > wheat. The effect of amylopectin average chain length and the polymorphism of the crystalline phase were taken into account to explain the differences in the retrogradation enthalpies.     

Structure and Functionality of Barley Starches

Amylose contents of prime starches from nonwaxy and high-amylose barley, determined by colorimetric method, were 24.6 and 48.7%, respectively, whereas waxy starch contained only a trace (0.04%) of amylose. There was little difference in isoamylase-debranched amylopectin between nonwaxy and high-amylose barley, whereas amylopectin from waxy barley had a significantly higher percentage of fraction with degree of polymerization < 15 (45%). The X-ray diffraction pattern of waxy starch differed from nonwaxy and high-amylose starches. Waxy starch had sharper peaks at 0.58, 0.51, 0.49, and 0.38 nm than nonwaxy and high-amylose starches. The d-spacing at 0.44 nm, characterizing the amylose-lipids complex, was most evident for high-amylose starch and was not observed in waxy starch. Differential scanning calorimetry (DSC) thermograms of prime starch from nonwaxy and high-amylose barley exhibited two prominent transition peaks: the first was >60°C and corresponded to starch gelatinization; the second was >100°C and corresponded to the amylose-lipid complex. Starch from waxy barley had only one endothermic gelatinization peak of amylopectin with an enthalpy value of 16.0 J/g. The retrogradation of gelatinized starch of three types of barley stored at 4°C showed that amylopectin recrystallization rates of nonwaxy and high-amylose barley were comparable when recrystallization enthalpy was calculated based on the percentage of amylopectin. No amylopectin recrystallization peak was observed in waxy barley. Storage time had a strong influence on recrystallization of amylopectin. The enthalpy value for nonwaxy barley increased from 1.93 J/g after 24 hr of storage to 3.74 J/g after 120 hr. When gel was rescanned every 24 hr, a significant decrease in enthalpy was recorded. A highly statistically significant correlation (r = 0.991) between DSC values of retrograded starch of nonwaxy barley and gel hardness was obtained. The correlation between starch enthalpy value and gel hardness of starch concentrate indicates that gel texture is due mainly to its starch structure and functionality. The relationship between the properties of starch and starch concentrate may favor the application of barley starch concentrate without the necessity of using the wet fractionation process.     

Impact of Waxy,Partial Waxy,and Wildtype Wheat Starch Fraction Properties on Hearth Bread Characteristics

Thirteen different wheat cultivars were selected to represent GBSS mutations: three each of wildtype, axnull, and bxnull, and two each of 2xnull and waxy. Starch and A‐ and B‐granules were purified from wheat flour. Hearth bread loaves were produced from the flours using a small‐scale baking method. A‐granules purified from wildtype and partial waxy (axnull, bxnull, and 2xnull) starches have significantly higher gelatinization enthalpy and peak viscosity compared with B‐granules. A‐ and B‐granules from waxy starch do not differ in gelatinization, pasting, and gelation properties. A‐ and B‐granules from waxy starch have the highest enthalpy, peak temperature, peak viscosity, breakdown, and lowest pasting peak time and pasting temperature compared with A‐ and B‐granules from partial waxy and wildtype starch. Waxy wheat flour has much higher water absorption compared with partial waxy and wildtype flour. No significant difference in hearth bread baking performance was observed between wildype and partial waxy wheat flour. Waxy wheat flour produced hearth bread with significantly lower form ratio, weight, a more open pore structure, and a bad overall appearance. Baking with waxy, partial waxy, and wildtype wheat flour had no significant effect on loaf volume.     

碾轧时间和频率对玉米淀粉机械力化学效应的影响

为了研究碾轧对玉米淀粉机械力化学效应的影响,该研究以玉米淀粉为原料,采用扫描电镜、偏光显微镜、激光共聚焦显微镜、X-射线衍射、傅立叶变换红外光谱仪、差示扫描量热仪、快速黏度分析仪等手段来研究碾轧处理时间和转速对样品的表面形貌、粒度分布、结晶结构、糊化特性和热特性等结构和性质的影响。结果表明,在频率为20 Hz条件下,碾轧处理3~9 h时,碾轧对淀粉结晶结构破坏作用较弱,主要是对颗粒的无定型区产生了破坏作用,破坏了无定型区的双螺旋结构,中央腔变大,孔道模糊。碾轧处理3~6 h时,淀粉颗粒形状发生不规则变化,粒径也发生了相应的变化,热焓值下降,而结晶度下降不显著。在碾轧处理9 h时,球状凸起变大,水溶指数、膨胀度、透光率、峰值黏度和热焓值都有所减小,而淀粉乳稳定性增强。碾轧处理12~24 h时,淀粉颗粒表面球状凸起变的不明显,淀粉颗粒结晶区内部双螺旋结构破坏,孔道增多变粗,粒径增大,热焓值下降。总之,频率为20 Hz时的碾轧处理对淀粉颗粒的无定形区、结晶区产生不同程度的机械力化学作用,导致玉米淀粉颗粒内部依次发生了受力、聚集和团聚效应。而频率为30 Hz时,由于剪切力更强,碾轧处理对淀粉结构和性质的影响更为显著。     

Morphological Changes of Granules of Different Starches by Surface Gelatinization with Calcium Chloride

Native starch granules of 11 selected cultivars (potato, waxy potato, sweet potato, normal maize, high‐amylose maize, waxy maize, wheat, normal barley, high‐amylose barley, waxy barley, and rice) were treated with a calcium chloride solution (4M) for surface gelatinization. The surface‐gelatinized starch granules were investigated using light microscopy and scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). In general, those starches with larger granule sizes required longer treatment time to complete the gelatinization. The salt solution treatment of starch was monitored by light microscopy and stopped when the outer layer of the granule was gelatinized. The surface gelatinized starch granules were studied using scanning electron microscopy. On the basis of the gelatinization pattern from calcium chloride treatments, the starches could be divided into three groups: 1) starches with evenly gelatinized granule surface, such as normal potato, waxy potato, sweet potato, maize, and high‐amylose maize; 2) starches with salt gelatinization concentrated on specific sites of the granule (i.e., equatorial groove), such as wheat, barley, and high‐amylose barley; and 3) starches that, after surface gelatinization, can no longer be separated to individual granules for SEM studies, such as waxy barley, waxy maize, and normal rice. The morphology of the surface gelatinized starch resembled that of enzyme‐hydrolyzed starch granules.     

α-Amylolysis of Large Barley Starch Granules

The α-amylolysis of large (volume average 16 μm) barley starch granules was studied by measuring the amount of carbohydrates solubilizing during hydrolysis, and the changes in morphology and molecular structure of the granule residues by scanning electron microscopy, particlesize analysis, size-exclusion chromatography, X-ray diffraction, and differential scanning calorimetry. X-ray diffraction showed that, in the earlier stages of α-amylolysis, both amorphous and crystalline parts of the granules were equally solubilized. More extensive hydrolysis caused a gradual decrease in A-type crystallinity and degradation of the granular structure. Scanning electron microscopy revealed that hydrolysis proceeded through pinholes, and pitted and partially hollow granule residues were formed. The lipid-complexed amylose was less susceptible to α-amylolysis than free amylose and amylopectin. Lipid-complexed amylose started leaching out of the granule residues only after half of the starch had solubilized due to the α-amylase treatment. Even though scanning electron microscopy indicated that there were intact granules left throughout the hydrolysis, the results obtained suggested that α-amylolysis of large barley starch granules proceeded rather evenly among the granules.     

Influence of Amylose Content on Properties of Wheat Starch and Breadmaking Quality of Starch and Gluten Blends

The effects of amylose content on thermal properties of starches, dough rheology, and bread staling were investigated using starch of waxy and regular wheat genotypes. As the amylose content of starch blends decreased from 24 to 0%, the gelatinization enthalpy increased from 10.5 to 15.3 J/g and retrogradation enthalpy after 96 hr of storage at 4°C decreased from 2.2 to 0 J/g. Mixograph water absorption of starch and gluten blends increased as the amylose content decreased. Generally, lower rheofermentometer dough height, higher gas production, and a lower gas retention coefficient were observed in starch and gluten blends with 12 or 18% amylose content compared with the regular starch and gluten blend. Bread baked from starch and gluten blends exhibited a more porous crumb structure with increased loaf volume as amylose content in the starch decreased. Bread from starch and gluten blends with amylose content of 19.2–21.6% exhibited similar crumb structure to that of bread with regular wheat starch which contained 24% amylose. Crumb moisture content was similar at 5 hr after baking but higher in bread with waxy starch than in bread without waxy starch after seven days of storage at 4°C. Bread with 10% waxy wheat starch exhibited lower crumb hardness values compared with bread without waxy wheat starch. Higher retrogradation enthalpy values were observed in breads containing waxy wheat starch (4.56 J/g at 18% amylose and 5.43 J/g at 12% amylose) compared with breads containing regular wheat starch (3.82 J/g at 24% amylose).     

Starch characteristics and their influences on in vitro and pig prececal starch digestion

The main objective of this research was to study the characteristics of starch granules and their influences on in vitro and pig prececal starch digestion of corn, dehulled barley, wheat, and potato. Scanning electron microscopy was used to study the starch endosperm structure in the parent material as well as in vitro starch digestion. The results showed that corn starch granules were polyhedral, with a diameter ranging from 2 to 10 μm, whereas those of dehulled barley and wheat were spherical, with a diameter ranging from 5 to 20 μm. Potato had the largest starch granules among starch sources reported herein, with oval spheres of 10-50 μm in diameter. In vitro starch hydrolysis showed that starch granules of corn degraded faster than the starch of dehulled barley and wheat, with the potato starch being degraded the slowest. The in vivo digestibility trial using ileal-cannulated pigs confirmed the starch degradation of grains. The in vitro (x, %) and in vivo (y, %) digestibility were highly correlated [y = 6.5304x - 538.48 (R(2) = 0.9924)]. On the basis of the results, in vitro starch hydrolysis might be useful in predicting in vivo prececal starch digestibility. The digestion kinetic characteristics of different starch sources might be employed to evaluate the starch digestive rate at the pig ileum.     

Effect of sucrose on the thermomechanical behavior of concentrated wheat and waxy corn starch-water preparations

The rheological behavior of concentrated starch preparations from two different origins (wheat and waxy corn) was studied in the presence of sucrose by dynamic mechanical thermal analysis (DMTA). Moisture contents ranged from 30 to 60% (w/w wsb), and samples contained 0, 10, or 20 g of sucrose for 100 g of the starch-water mixture. The storage modulus (G') changes during heating depended strongly on water content (in the moisture range studied), and the importance of these variations was dependent upon the starch type. Sucrose addition resulted in a shift to higher temperatures of the increase in G' during heating. Differential scanning calorimetry (DSC) and electron-spin resonance (ESR) analyses were performed in parallel in order to relate the viscoelastic changes to water migrations and to structural disorganization of starch. Sucrose was found to increase the gelatinization temperature and enthalpy of both starches, implying a stabilization of the granular structure during heating. The sugar-water interactions do not appear to be the only way by which sucrose delays starch gelatinization. The obtained results suggest that sugar-starch interactions in the amorphous and/or the crystalline regions of the starch granules should be envisaged.     

Quality of Flours from Waxy and Nonwaxy Barley for Production of Baked Products

One nonwaxy (covered) and two waxy (hull-less) barleys, whole grain and commercially abraded, were milled to break flour, reduction flour, and the bran fraction with a roller mill under optimized conditions. The flour yield range was 55.3–61.8% in whole grain and increased by 9–11% by abrasion before milling. Break flours contained the highest starch content (≤85.8%) independent of type of barley and abrasion level. Reduction flours contained less starch, but more protein, ash, free lipids, and total β-glucans than break flours. The bran fraction contained the highest content of ash, free lipids, protein, and total β-glucans but the lowest content of starch. Break flours milled from whole grain contained 82–91% particles <106 μm, and reduction flours contained ≈80% particles <106 μm. Abrasion significantly increased the amount of particles <38 μm in break and reduction flours in both types of barley. Viscosity of hot paste prepared with barley flour or bran at 8% concentration was strongly affected by barley type and abrasion level. In cv. Waxbar, the viscosity in bran fractions increased from 428 to 1,770 BU, and in break flours viscosity increased from 408 to 725 BU due to abrasion. Sugar snap cookies made from nonwaxy barley had larger diameter than cookies prepared from waxy barley. Cookies made from break flours were larger than those made from reduction flours, independent of type of barley. Quick bread baked from nonwaxy barley had a loaf volume similar to that of wheat bread, whereas waxy barley bread had a smaller loaf volume. Replacement of 20% of wheat flour by both waxy and nonwaxy barley flour or bran did not significantly affect the loaf volume but did decrease the hardness of quick bread crumb.     

Effects of Milling on the Physicochemical Characteristics of Waxy Rice in Taiwan

Three types of mills and six milling methods were employed to mill two waxy rice varieties (TCSW1, long grain; TCW70, short grain), and the physicochemical and functional properties of rice flour were examined. The results showed that dry-milling maintained a higher level of the chemical components than other milling methods. Wet-milling slightly increased solubility as test temperatures increased, and significantly increased swelling power at 75 and 85°C for TCSW1 and TCW70, respectively. Hammer and semi-dry hammer milling gave higher percentages of coarse particles (100–300 μm); cyclone and turbo milling led to a more even particle-size distribution, and the wet-milling gave the finest particles (10–30 μm). Dry hammer-milled rice had higher gelatinization and pasting temperatures, and semi-dry grinding milling resulted in the lowest pasting temperature, setback viscosity, and enthalpy value among the mills. The final quality of the two waxy rice varieties was profoundly affected by the mill type and milling method.     

Comparison of the physicochemical properties and ultrastructure of japonica and indica rice grains

The physicochemical properties and ultrastructures of japonica vs indica rice varieties and waxy vs nonwaxy rice varieties were compared. The viscogram values of the indica varieties were significantly higher than those of the japonica varieties. The gelatinization temperatures, breakdown, and setback were significantly lower for waxy than for nonwaxy rice varieties. Japonica rice exhibited lower hardness but higher adhesiveness than indica rice. The air space between individual starch granules was larger for waxy than for nonwaxy rice. The starch granules were compact in japonica rice, while the compound starch granules of indica rice were much smaller than those of japonica rice and were scattered widely in the endosperm. The protein bodies in japonica rice were concentrated near the cell wall, whereas those in indica rice were scattered around amyloplasts. These results suggest that the ultrastructure of rice affects the texture of the cooked product.     

Effect of Steeping Corn with Lactic Acid on Starch Properties

Pasting and thermal properties of starch from corn steeped in the presence of lactic acid and at different steeping times (8, 16, 24, 32, and 40 hr) were investigated. Corn kernels were steeped at 52°C with 0.2% (w/v) SO₂ and with and without 0.5% (v/v) lactic acid. The isolated starch obtained by corn wet‐milling was characterized by determining starch recoveries, retrogradation, and melting transition properties of the lipid‐amylose complex by differential scanning calorimetry (DSC), and pasting properties by the Rapid Visco Analyser (RVA). Damaged granules and the starch granule size were determined by using microscopic techniques. Starches from corn steeped in the presence of lactic acid (LAS) were compared with control starch (CS) steeped without lactic acid. Greater starch recoveries were obtained for LAS samples than for CS samples, and practically no damaged starch was present in the former preparations. The presence of lactic acid affected the RVA profiles and steeping time affected the viscosities of the starch suspensions. In general, the RVA parameters of LAS suspensions were lower than those of CS suspensions. No great modification of the thermal properties was observed; only a slight decrease in amylopectin retrogradation and in the melting enthalpy of the amylose‐lipid complex was observed. Hydrolysis of the starch during steeping seems the most probable explanation to the starch modifications produced by lactic acid addition.