System Testing with the Measurement & Control Network Technology

with the measurement and control network technology, the research and development of the performance test system of silicone oil fan clutch for automobile are introduced. The system can take intelligent measurement with three clutches on the line simultaneously. It also can display measurement curves, file reporting, and so on in the same time. The system has the capability of 256 channels communications.     

The Preliminary Study of the Automobile Steering-gear Performance Test Theory and Its Test System

This paper presents a new steering-gear performance test calculation formula,and set up a corresponding test system on this basis,and obtain a preliminary test result.     

Dynamic FEM Analysis of Automobile and Software Development

In this article, modal analysis technology about dynamic analysis was studied. Free interface model comprehensive method was used to dynamic analysis and design of automobile structure based on theory background of model analysis, test technology conditions, data reliability and precision. In order to test the efficient and possibility of the method, main vibration features about space double layer has been calculated based on this method, comparing this with the precise solution of finite element method, the result shows that this method is suitable not only for simple interfaces between components but also for high reductive interfaces. In addition, the method also has high comprehensive precision. Furthermore it creates conditions to dynamic analysis in automobile structures.     

啤酒中有害微生物的检测与防治研究

啤酒中的有害微生物对啤酒的品质有很大的影响。在啤酒生产中,对有害菌的快速检验和有效控制有着重要的意义。综述了啤酒中有害微生物的检测技术和防治措施。     

热风干燥智能控制系统的设计

根据热风干燥工艺特性,借助自研开发的热风干燥实验台,基于PLC设计了热风干燥智能控制系统。针对热风干燥实验台温度非线性、大滞后和惯性大的特点,采用模糊—PI控制器,保证了温度控制精度和稳定性。该控制系统实现了温度、湿度、风速和干燥时间的分阶段设置和显示,趋势曲线显示和历史数据下载功能。     

Development of Software Reuse Technology in Industrial Control Software Area

This paper briefly introduces the contents and characteristics of the software reuse technology and industrial control software. The development of the software reuse technology in industrial control software area is discussed emphatically. Then the article brings forward a kind of thought that establishes standard element class library and develops the application program frame adapts to industrial control area. Namely, they are the establishment of the reuse of standard element class library based on the level of class library, the design of the reuse of the program frame based on the level of design, the amelioration of the reuse of the designing method based on the level of analysis. This thought improves on design method of industrial control software and is applied in the real-time monitoring system for the high-press water pump station.     

Temperature Control of High Temperature Melt Viscosity Test Instrument

The construction and function of high temperature melt viscosity test instrument are introduced in this paper. And the character of temperature control system is given. In order to improve dynamic and static performance of the temperature control system, a new method is proposed which combines threshold control with adaptive fuzzy PID control. While the current temperature of the heating furnace is much lower than the given temperature, threshold control works in order to protect system and improve dynamic performance. When the current temperature is close to the given value, adaptive fuzzy PID control works to improve static performance. At last, simulation and experiment results validate the proposed control method.     

Development of Static Characteristic Automatic Testing System About Brake Valves of Automobile

This paper describes a PC controlled brake valve automatic testing system which uses industrial control(computer) and Advantech powerful date acquition card PCI-1710L,and chooses Advantech PCI-1730 as the I/O card,(uses) FUJI servo systrm as the transmission mechanism.The system monitor the brake valve's quality based on analyseing the static characteristics of the brake valve.The authors also introduce the principle and structure of the system,hardware and software design process.The system works well in practice.     

Development of Movement Control System of Shoe Leather Lumen CT Instrument

A method of solving the problem of shoe leather lumen measurement in shoe CAD/CAM by industrial CT technology is introduced,X ray industrial CT technology is studied. The paper gives a rational scheme of system dispose. This scheme can be not only meet the need of shoe leather lumen measurement, but also achieve ordinary measurement. An uncomplicated and practicable movement control system are proposed also. This scheme achieves high precision of movement position without expensive direct current servo-control. A new simple method measurement is developed and accurate control of position in movement of detector data insert is achieved. The image resolving power can meet shoe leather lumen measurement.     

Realization of Multi-task Scheduling in Linux Based IPC Measurement and Control System

Industrial Personal Computer(IPC) system generally works in long duration,and so a stable software is essential for an IPC system.Linux has a good deal advantages,such as,stability in use,open source code and free of charge, therefore an IPC measurement and control system has developed based on Linux. Multi-task scheduling is the critical part in system software.A simple method to realize multi-task scheduling in IPC measurement and control system based on Linux alarm clock mechanism is presented. Linux alarm clock mechanism is implemented by the cooperation of software timers and system call that is used to install and handle alarm clock.First, Linux process timers,soft interrupt signals, relevant system call are introduced,as well as applications of Linux alarm clock mechanism in multi-task scheduling. And then an example of the application in the IPC measurement and control system is given. The system has passed longtime run test,accomplished expected functions and shown well stability, so that practicability of the scheduling method has been authenticated.     

Video Monitor and Control System of Tunnel Based on DSP/BIOS

A video Monitor &Control system of tunnel based on DSP/BIOS is proposed,which is different from traditional video Monitor & Control system.It uses DSP to process image,and uses enhanced video input processor to qcquire image.This system satisfies all requirements of video supervision,and is a low cost system.It has a good application foreground.The system has been confirmed as a good veracity and practicability system through testing in the Zhongliang Mountain tunnel of Chongqing.     

磺胺甲噁唑残留检测阻断ELISA试剂盒的研制

在建立磺胺甲噁唑单克隆抗体(SMZmAb)杂交瘤细胞株和阻断ELISA方法的基础上,研制出SMZ残留快速检测试剂盒(SMZ-Kit),并对其性能进行了测定.结果表明,SMZ-Kit的标准曲线呈典型的S型,符合4参数logit曲线拟合,相关系数R2=0.990 1,检测范围为1.0～128.0 μg/L,灵敏度为0.73 μg/L,半数抑制浓度(IC50)为11.5 μg/L,检测限为1.0μg/L;饲料样、牛奶样的平均添加回收率为83.9%,83.3%,平均批内和批间变异系数均<15%;SMZ-Kit与磺胺嘧啶的交叉反应(CR%)为2.88%,与其他磺胺类药物无交叉反应;试剂盒在4℃可保存6个月.     

Test Method of Indoor Noise for Micro-surfacing Mix

Micro-surfacing mix has been wildly used in the pavement maintenance for its water proofing, anti-skidding and wear resistance. However, micro-surfacing pavement has higher noise than the common asphalt pavement and its noise can not be measured effectively and accurately. Therefore, the indoor noise test method of micro-surfacing mix based on wet track abrasion test was explored. The micro-surfacing mix specimens were used to imitate the micro-surfacing pavement. The wet track abrasion tester was used to provide the vehicle loads. The sound level meter was used to measure the noise between tire and pavement. Furthermore, the indoor noise of nine kinds of micro-surfacing mixes with different gradation was examined. The results show that the equivalent sound level in the second time period has good relationship with the surface texture depth by sad patch method. Then the test method and test procedure for the indoor noise of micro-surfacing mix based on wet track abrasion test were given. Finally, two micro-surfacing mixtures with different gradations were made to validate the test method. The results show that the evaluation method can effectively distinguish the difference of micro-surfacing mixes with different gradation and can supplement the mix design method of micro-surfacing mixes.     

The Research on Pretreatment and Cycle Stream of Control for CAT and CNC

A new idea "Pretreatment and cycle stream of control" and the scheme to put it into practice is presented. In space region,the circuit is designed to form chain and cycle,and in time region,the program is designed to distinguish the period and the instant.It is ensured that the pretreatment will be finished in the period and there is always a circuit to wait to the triggered at the instant. So the respond speed of the system is almost approximate to that one of trigger circuit.     

白星花金龟发生与防治技术研究初报

白星花金龟,[Potosia(Liocola)brevitarsis(Lewis)]是新疆维吾尔自治区昌吉地区农作物、果树及林木上发生的一种新害虫,近年来其发生和危害逐年加重,为此,笔者通过大面积多点取样调查和定点、定时观测以及建立昆虫园等方法初步摸清了其生活习性和危害的各种寄主作物,并提出了适合昌吉地区的防治措施和对策,如人工捕捉、集中诱杀、粪堆处理、拒避成虫以及药剂防治等,为控制该虫的发生和危害提供了依据。     

Development of Measurement and Control System of Engine Test-bed Experiment for Motorcycle

Engine test-bed experiments are the main means of engine performance test, whose necessary developing trend is to apply measurement and monitoring system based on the computer. This paper introduces alteration for engine test-bed experiment system. By adopting data acquisition system, using web and ftp technique, computer-controlling and remote monitoring in real-time are realized. And the details of singlechip are mainly discussed based on data acquisition system, testing-software, web and ftp technique. The improved system realizes automation of engine test-bed experiment and data processing. It can save time and manpower, increase the productivity and improve the working condition. Especially the interface of system software developed by Delphi under Windows is simple, clear and easily dealt. The practical application proves that the new system has good value for engineering.     

基于微信公众平台的枣树病虫害专家诊断系统开发

为快速传播并普及枣树病虫害知识,使用农业专家系统提高枣树病虫害诊断及管理效率,基于微信服务号公众平台,采用php脚本语言及mysql数据库开发出枣树病虫害专家诊断系统"JujubaExpert2020".该系统包括病虫诊断、栽培历史及枣树资讯3个功能模块,核心功能为枣树主要病虫害数据库和专家诊断论坛.用户可以通过关键字...     

双重检测马铃薯X和Y病毒试纸条制备技术研究

为了实现在马铃薯种薯生产田现场同时快速检测马铃薯X（PVX）和Y病毒（PVY）,利用胶体金标记和免疫层析技术研制了PVX-PVY双重检测试纸条。采用柠檬酸三钠还原法制备胶体金溶液,在波长526nm处有最大吸收值,金颗粒直径约25nm。同时标记PVX和PVY兔多克隆抗体,将抗体标记物喷射于玻璃纤维纸上,作为金标垫。将PVX和PVY抗体分别划线于硝酸纤维素膜上作为检测线,将羊抗兔抗体划线于硝酸纤维素膜上作为质控线,制备胶体金试纸条。结果表明,研制的双重试纸条能够在2min之内同时检出PVX和PVY。PVX病汁液检测稀释限度可达10⁶倍（W/V）,PVY可达10⁵倍（W/V）,其中对PVX检测更灵敏。用其他4种常见病毒（PVS、PLRV、PVA和PVM）检测,未出现交叉反应。在田间采集马铃薯叶片,分别利用试纸条与DAS-ELISA检测,结果一致性非常高。由此可知,该试纸条具有操作简便、反应快捷的特点,特别适用于田间及口岸一线对于马铃薯X和Y病毒的同时检测。