对控制性详细规划的几点认识

控制性详细规划是规划体系中与管理实施相衔接的层次,是一个最基本的层次。     

预测控制在锅炉汽包水位控制中的应用

在给出具有可测干扰系统后,结合预测函数控制,实现对锅炉汽包水位的参数预测控制.仿真实验表明,参数预测控制与传统的PID控制方法相比,其控制性能更为优越.     

健全质保体系、增强自控能力、确保工程质量

本文运用健全组织形式,加强管理制度的办法来论述提高建筑施工企业的自控能力。以确保工程质量,具体的提出了“事前控制”、“事中控制”、“事后控制”的做法,对提高建筑施工企业的工程质量有一定的实际意义。     

浅谈建设工程施工阶段监理的主要内容和措施

建设工程施工阶段监理的重点为质量、投资、进度3大控制,其监理的方法有旁站、巡回、跟踪、阅看报告、勘察丈量、定期不定期检查、见证取样、提前示范、拍照录像、平行检验等。并以云南省林木种苗基地行政用房为例进行了总结。     

有效实施现金流的内部控制

本文结合最新内部控制理论,遵从COSO的精神,从营造现金流管理的控制环境、加强对影响企业现金流的各种风险的评估和预测、规范和完善现金流的各种控制活动、建立和完善现金流方面的信息系统,加强信息沟通、强化对现金流的监控等五个相互联系的方面,对企业现金流控制进行了分析和探讨,以期实现企业价值最大化的目标及企业的可持续性发展.     

土建结构中振动控制的发展

基于控制、计算机、材料和结构力学等领域的新技术使结构振动控制取得了新的进展,本文从不同角度对结构振动控制进行了分类,介绍了其发展与现状,指出了其发展趋势和有待解决的问题.     

谈工程项目在施工阶段的质量控制

工程质量是工程建设的核心,没有质量就没有投资效益,没有工期进度,没有社会信誉。质量是企业的生命线,是工程项目控制的重点。本文就工程项目在施工阶段的质量控制要求、方法、影响因素及过程等方面进行论述。     

汽车排放污染及控制技术

随着人们生活质量的提高，环保意识的增强，汽车排放污染的问题愈来愈引起全人类的重视。目前，各国对汽车排放的要求都有一定的标准且日趋严格，并从立法角度控制汽车排放污染，因此使得一些生产厂不断研究和使用控制汽车排放污染的有效方法，并已取得可喜的成效。本文就汽车排放污染物的种类、危害及污染的控制技术等问题进行探讨．１汽车排放污染物的种类及危害①Ｐｂ（铅）：为了保证汽车良好的动力性和经济性，并满足其发动机高压缩比对汽油高辛烷值的要求，需要添加抗爆剂。作为汽油抗爆剂使用的烷基铅会从汽车排气管进入大气。研究表…     

浅析水利工程质量控制方法

介绍水利工程质量控制的重要性,提出水利工程质量控制的方法。     

试论工程总承包中的三大控制

以设计院为基础，利用现有技术力量、设备进行工程总承包，是目前我国主要提倡的总承包方式，这种承包方式有利于发挥设计优势，减少协调工作。通过开展优化设计、正确组织设备材料订货、正确选择施工队伍、安排好施工场地、改进施工管理办法、搞好施工进度款和不可预见费管理，可以较好地控制工程投资，提高质量，缩短工期。     

Chemical control of Apriona germari （Hope） larvae with zinc phosphide sticks

Larvae of Apriona germari(Hope),found widely in China,cause serious damage to trees and are difficult to control.Since some biological control methods have not been applied effectively in the field,chemical control methods are used widely.Because of low cost,no poisonous residues and relatively safe application,zinc phosphide sticks have been tested to control the larvae as a matter of urgency.However,there were no criteria about the dosage and use.Given the characteristics of larvae tunnels on triploid Pop...     

光肩星天牛幼虫排粪规律调查

天牛幼虫排出的虫粪在指示天敌寻找寄主的过程中起着重要的作用。通过在光肩星天牛幼虫发生期定期收集幼虫虫粪的方法,首次研究了林间天牛幼虫排粪量的变化规律。结果显示,光肩星天牛成虫羽化前,排粪总量呈现由上升到下降的过程,单个排粪孔的日平均排粪量为(0.030 2±0.002 1)g,单排粪孔的日最大排粪量可以达到0.319 4 g。同时研究了幼虫排粪量与寄主树的胸径、树皮厚度、树皮含水量和排粪孔大小的关系,结果表明,在调查期内,无论是各个排粪孔的排粪总量还是日均最大排粪量,均与排粪孔的大小有直接关系,而与其他几个因子无关。通过在树干上缠绑胶带形成的微栖境,采集到了光肩星天牛的天敌花绒寄甲成虫,表明花绒寄甲的发生与寄主天牛的发生紧密相关。     

Types of frass produced by the ambrosia beetle <Emphasis Type="Italic">Platypus quercivorus</Emphasis> during gallery construction,and host suitability of five tree species for the beetle

We studied the biology of the ambrosia beetle Platypus quercivorus in the logs of five tree species to determine: (1) the relationship between the amount of frass produced by beetles and tunnel length, (2) the relationship between frass shape and the morphological characteristics of P. quercivorus mouthparts, and (3) the suitability of five tree species for P. quercivorus reproduction. Five logs each from healthy Quercus crispula, Q. serrata, Castanea crenata, Sorbus japonica, and Cryptomeria japonica trees were used in this experiment. The results showed that there was a linear relationship between the amount of frass and tunnel length. Whenever powdery frass was produced, larvae were found in the gallery in the log, while fibrous frass was present only in galleries that contained just adults. The mouthparts of adults were completely sclerotized, which likely accounts for the fibrous frass production. Host preference of P. quercivorus was examined at two stages using five tree species. The first stage is digging initiation, which concerns male preference for digging a tunnel. More holes were made by males on S. japonica and Q. serrata logs, while fewer holes were made on C. japonica logs. The second stage is characterized by female orientation, mating, and progeny development. Platypus quercivorus could complete its lifecycle only in the two Quercus spp.     

寄主树木、寄主和环境因子对松褐天牛深沟茧蜂寄生率的影响研究

[目的]松材线虫病是我国对森林危害和威胁最严重的病害,控制其传播媒介昆虫松褐天牛是防治松材线虫病的主要手段。作者发现的松褐天牛深沟茧蜂(Iphiaulax monochamusi Yang)是寄生松褐天牛中老龄幼虫的重要天敌。为明确松褐天牛深沟茧蜂的寄生率与寄主树木、寄主和环境因子的关系,开展了本研究。[方法]通过解剖46株松褐天牛危害致死的马尾松,调查了松褐天牛深沟茧蜂寄生率与马尾松、松褐天牛和环境因子之间的关系。[结果]调查研究表明:寄主树木的高度、胸径和树龄对松褐天牛深沟茧蜂寄生率没有显著影响,松褐天牛的数量对松褐天牛深沟茧蜂寄生率亦没有显著影响,而松褐天牛幼虫龄期和松褐天牛幼虫在树干上的位置显著影响松褐天牛深沟茧蜂寄生率。松褐天牛深沟茧蜂寄生率与松褐天牛龄期呈显著正相关,其偏好寄生3~5龄幼虫;就天牛在其危害寄主树木上的位置而言,松褐天牛深沟茧蜂偏好寄生马尾松主干上部和在韧皮部危害的松褐天牛幼虫,其对位于马尾松树干上部的寄主幼虫寄生率最高,达27.38%,对在韧皮部生活、危害的寄主幼虫寄生率为20.18%,显著高于位于木质部生活的寄主幼虫寄生率(5.46%)。逐步回归分析表明:影响松褐天牛深沟茧蜂寄生率的关键环境因子是寄主树木的坡位和其它天敌寄生率,其中,坡位与松褐天牛深沟茧蜂呈显著正相关,其它天敌寄生率与松褐天牛深沟茧蜂寄生率呈显著负相关。[结论]以上研究初步明确了松褐天牛深沟茧蜂的寄生率与寄主树木、寄主害虫和天敌之间的关系,为今后利用该重要天敌控制松褐天牛打下了基础。     

Lignin characterization of triploid clones of Populus tomentosa Carr.

In order to understand the structural characteristics of lignin in triploid clones of Populus tomentosa and its changes in the processes of pulping and bleaching, milled wood lignin (MWL), lignin carbohydrate complex (LCC) and the residual lignin from kraft pulp (KP) and sulfite pulp (SP) were isolated and analyzed by Fourier transform infrared (FTIR) spectrum and ¹³C nuclear magnetic resonance (NMR). The most diagnostic peaks were assigned and the differences were discussed. The spectral patterns reveal that triploid P. tomentosa shows the specific features of hardwood from temperate areas, but in the spectrum of FTIR, the strength ratio of A 1270 cm⁻¹ to A1226 cm⁻¹ is 0.88, higher than the average of hardwood from temperate areas, which will make the lignin delignification more difficult during pulping and bleaching. The LCC from triploid P. tomentosa is mainly composed of xyloglucan and glucuronic acid, and other glucides have much lower ratio. In LCC FTIR, there are three peaks at 1 427, 1 329 and 1 046 cm⁻¹, indicating that both semi-cellulose and cellulose could exist in LCC, and that there might be relationships between cellulose and lignin. Compared with the residual lignin from KP and SP, the condensed structure in KP is more than that in SP.     

松褐天牛在马尾松树干上的分布规律

作为松材线虫病(Bursaphelenchus xylophilus)的最重要传播媒介,松褐天牛已成为控制松材线虫病的重点。明确松褐天牛各虫态在不同地区寄主树干上的分布,对因地适宜地释放天敌昆虫有着重要意义。为此,本研究通过解剖受害马尾松,结合林间调查,系统地研究了松褐天牛产卵刻槽、幼虫和蛹在马尾松树干上的分布规律。结果表明:松褐天牛产卵刻槽主要分布在树干的2.5 6.5 m范围内,刻槽数量与树干高度和胸径显著相关;松褐天牛幼虫数量与树干胸径关系不显著;多数蛹室位于侵入孔正上方,少数蛹室位于侵入孔下方,两种蛹室数量差异显著;两种蛹室与侵入孔中心的平均距离分别为3.93 cm和4.39 cm,两者之间差异不显著;并建立了松褐天牛幼虫在马尾松树干上的垂直分布模式图。本研究表明了松褐天牛种群密度与寄主树木大小的关系,为释放天敌进行生物防治提供了基础。     

九连山金斑喙凤蝶野外生物学特性观测

[目的]通过连续12 a对金斑喙凤蝶的野外调查观察,研究成虫活动规律,并利用仿生态养殖,观察金斑喙凤蝶卵和幼虫的形态特征与生活习性,研究其生物学特性,以期为金斑喙凤蝶研究与保护提供有效数据。[方法]根据2004—2012年对金斑喙凤蝶成虫活动规律的观察研究,2013—2015年,在金斑喙凤蝶成虫活动期,采用样线踏查的方法,自海拔450 m往山顶海拔1 200 m搜索,调查视野内木兰科植物分布情况,寻找卵和幼虫,收集后带回驻地进行仿生态养殖,观察其形态特征和生活习性。[结果]金斑喙凤蝶在九连山为一年二代,以蛹越冬,第一代成虫发生期为4月上旬至5月中旬,第二代成虫发生期为8月下旬至9月中旬;2013年在木兰科植物金叶含笑上发现卵和幼虫,2014和2015年在深山含笑上发现卵和幼虫,深山含笑为新发现寄主植物,目前除九连山外尚未有报道;幼虫5龄,各龄级幼虫差异较大;预蛹成蛹经历两次蜕皮过程,这是金斑喙凤蝶研究中的一项重大发现。[结论]1)金斑喙凤蝶卵和幼虫的分布与寄主植物分布密切相关,且对生境质量有较高要求,成虫活动范围主要在寄主植物分布范围及其周边;2)金斑喙凤蝶选择生长良好的金叶含笑和深山含笑叶片上产卵,或嗜食深山含笑;3)温度、湿度等环境因子对卵的孵化、幼虫的生长发育以及化蛹和羽化影响较大;4)金斑喙凤蝶雌蝶少,卵孵化率低,幼虫发育历期长,幼虫成活率低,化蛹和羽化率低等是导致其种群数量稀少的主要原因。5)据查,目前尚未有其它蝶类化蛹过程中经历两次蜕皮的报道,预蛹化蛹蜕两次皮是金斑喙凤蝶异于其他蝶类的特殊现象。     

Genetic control of fiber properties and growth in triploid hybrid clones of Populus tomentosa

To better understand the genetic control of fiber properties (fiber length [FL], fiber width [FW] and coarseness [C]) and growth traits (tree height [H], diameter at breast height [DBH] and stem volume [SV]) in triploid hybrid clones of Populus tomentosa carr., genetic relationships among selected fiber properties with growth traits were examined in five-year-old clonal field trials located in Yanzhou, Gaotang and Xiangfen, China. In total, 180 trees from 10 clones were sampled from the three sites. The site had a moderate effect on FW, C and tree growth, and a highly significant (P<0.001) effect on FL and fiber length/width (FL/W). Clonal effects were also significant (P<0.05) for all studied traits except for the DBH and SV. Clone×site interactions were significant for all studied traits (except for FL). The estimated repeatability of clonal mean for FL (0.91) was higher than for FW (0.88), C (0.77), FL/W (0.74), H (0.62), DBH (0.61) and SV (0.55). Intersite genetic correlation estimates indicated that fiber properties were more stable than growth traits. Positively insignificant genetic correlation estimates between FL and growth trait and negatively insignificant genetic correlation estimates between C and growth traits were observed. This suggests that in the triploid hybrid poplar, clones selection for growth traits will not result in a significant increase or reduction in the fiber properties.     

Boring activity on coniferous tree branches byXylotrechus villioni (Villard) larvae (Coleoptera: Cerambycidae)

In anAbies homolepis Sieb. et Zucc. forest at Matsumoto, Nagano Pref., cumulative damage byXylotrechus villioni (Villard) (Coleoptera: Cerambycidae) was observed on tree branches. Of the 14 major branches in one sample tree, six had cumulative damage by boring larvae, of which 3 had been bored by multiple larvae. No adult emergence holes were found on the whole tree, suggesting very low survivorship from boring larva to emerging adult. Galleries made by single larvae were often observed to be terminated by a depression apparently carved by a picid woodpecker, suggesting that they are important predators of the cerambycid. The manner of cicatrix formation with phloem tissue over the larval gallery in anAbies veitchii Lindl. branch at Mt. Fuji, Yamanashi Pref. is presented. Studies onXylotrechus villioni (Villard) (Coleoptera: Cerambycidae), a primary borer of coniferous trees in Japan (III). This work was presented at the 104th Annual Meeting of Japanese Forestry Society at Morioka (April, 1993) and 20th International Congress of Entomology at Firenze (August, 1996). This work is supported by a Grant-in-Aid for Scientific Research (No.02660163) from the Ministry of Education, Science, Sports, and Culture of Japan.     

Effects of understorey vegetation on tree establishment and growth in a silvopastoral system in northern Greece

The interaction between understorey plants and trees in a young silvopastoral system was studied in a sub-humid Mediterranean environment with cold winters in northern Greece. The experimental design was a split-split plot with three replications and included: three understorey treatments (grass, legume and control), two tree species (Acer pseudoplatanus and Pinus sylvestris) and two spacings (2.5×2.5 m and 3.5×3.5 m). The competition between herbaceous plants and trees resulted in significant differentiation in tree growth while their spacing did not produce any significant differences. The influence of trees on herbage yield either by plant species or spacing was not significant. During the early stages of establishment, a significant positive correlation was observed between sycamore growth and soil moisture, leaf weight, leaf area and leaf number as well as nitrogen and potassium concentration in leaves. Six years after planting the height increase of the sycamore trees was largest in the control treatment (415%), lowest in the grass treatment (134%) and intermediate (192%) in the legume treatment. Much higher was the increase obtained for the diameter, 161%, 207% and 536% respectively for the grass, legume and control treatments. The Scots pine trees grew faster than sycamore over the course of the experiment. Height increased by 397%, 351% and 400% and diameter by 518%, 443% and 683% respectively for the grass, legume and control treatments. This revised version was published online in June 2006 with corrections to the Cover Date.