Determination of Young’s and shear moduli of common yew and Norway spruce by means of ultrasonic waves

Despite the exceptional position of yew among the gymnosperms concerning its elastomechanical properties, no reference values for its elastic constants apart from the longitudinal Young’s modulus have been available from literature so far. Hence, this study’s objective was to determine the Young’s moduli E _L, E _R and E _T and the shear moduli G _LR, G _LT and G _RT of yew wood. For that purpose, we measured the ultrasound velocities of longitudinal and transversal waves applied to small cubic specimens and derived the elastic constants from the results. The tests were carried out at varying wood moisture contents and were applied to spruce specimens as well in order to put the results into perspective. Results indicate that E _L is in the same order of magnitude for both species, which means that a high-density wood species like yew does not inevitably have to have a high longitudinal Young’s modulus. For the transverse Young’s moduli of yew, however, we obtained 1.5–2 times, for the shear moduli even 3–6 times higher values compared to spruce. The variation of moisture content primarily revealed differences between both species concerning the shear modulus of the RT plane. We concluded that anatomical features such as the microfibril angle, the high ray percentage and presumably the large amount of extractives must fulfil important functions for the extraordinary elastomechanical behaviour of yew wood which still has to be investigated in subsequent micromechanical studies.     

Micromechanical properties of common yew (Taxus baccata) and Norway spruce (Picea abies) transition wood fibers subjected to longitudinal tension

The longitudinal modulus of elasticity of common yew is astonishingly low in light of its high raw density. At least this was found for specimens examined at the solid wood level and at the tissue level. However, to reveal if this low axial stiffness is also present at the cellular level, tensile tests were performed on individual yew fibers and on spruce fibers for reference. The results revealed a low stiffness and a high strain to fracture for yew when compared with spruce. This compliant behavior was ascribed to a relatively high microfibril angle of yew measured by X-ray scattering. It can be concluded that the high compliance of yew observed at higher hierarchical levels is obviously controlled by a structural feature present at the cell wall level. In future studies, the biomechanical function of this compliant behavior for the living yew tree would be of particular interest.     

Cytology of Norway spruce needles

The structural changes in the albuminous, endodermal and mesophyll cells in the ageing needles of different aged healthy spruces (Picea abies [L.] Karst.) were studied on material collected in Germany and in Finland in winter. The results are considered as background information for the studies dealing with the structural changes in spruces suffering from biotic or abiotic stresses e. g., from the polluted air. Both light and electron microscopes were used.     

Fresh-stem bending of silver fir and Norway spruce

The bending and growth characteristics of large fresh stems from four silver fir (Abies alba Mill.) and three Norway spruce (Picea abies (L.) Karst.) trees were studied. Twenty logs taken from different stem heights were subjected to four-point bending tests. From the bending test records, we calculated stress-strain curves, which accounted for detailed log taper, shear deformation and self weight. From these curves we determined, among other parameters, the modulus of elasticity (MOE), the modulus of rupture (MOR) and the work absorbed in bending (W). No significant differences were found between species for the wood properties examined. Values of MOE, MOR and W generally decreased with stem height, with MOR in the range of 43 to 59 MPa and MOE ranging from 10.6 to 15.6 GPa. These MOE values are twice or more those reported for stems of young Sitka spruce (Picea sitchensis (Bong.) Carr.) trees. Based on the radial growth properties measured in discs from the logs, we calculated predicted values of MOE and MOR for the stem cross section. The predictions of MOE were precise, whereas those of MOR were approximate because of a complex combination of different failure mechanisms. Methods to test and calculate MOE, MOR and W for the stems of living trees are discussed with the aim of improving analyses of tree biomechanics and assessments of forest stability protection.     

Proteins in Norway spruce thermomechanical pulp

Two methods of cytochemical staining using Coomassie dye and Cu⁺-bicinchoninic acid, respectively, showed that there are proteins in thermomechanical pulp (TMP) of Norway spruce. Protein isolated from TMP was analyzed for amino acid composition. There was about twice the amount of acidic amino acid material compared with basic amino acids, and the presence of glucosamine indicated that the isolated polypeptides also contained glycoproteins. The presence of proteins in ray cells and fiber tracheids in TMP adds to the chemical heterogeneity of the structurally complex high-yield pulp.     

Potential production of Norway spruce in Sweden

In this paper, the potential stem wood production for Norway spruce was estimated for different regions in Sweden. This was done by using basic physiological relationships of intercepted radiation versus biomass production and knowledge of how a water deficit reduces the potential production, derived from results of field experiments on nutrient optimisation. To scale these relationships up to regional and national levels, data of incident radiation and humidity during the growing season for all of Sweden were used. The figures for potential and attainable production indicate that the temperate to boreal climate allows considerably higher production than the current production, if availability of water and nutrients is non-limiting. In northern Sweden, the attainable production is ca. 300% higher than the current production and in southern Sweden, the yield can be increased by ca. 100%. In absolute numbers, as a mean for a whole rotation period, it is possible to achieve an annual stem-wood dry mass production of 7–9 Mg ha⁻¹ in southern and central and ca. 5–6 Mg in northern Sweden. This increased production would mean that rotation periods can be shorter than they are now by 20–30 years in southern Sweden and by ca. 50–60 years in northern Sweden.     

Quality of timber products from Norway spruce

Summary The overall aim of this study and series of papers is to address the key variables for timber quality and to optimize the utilization of Norway spruce timber with respect to construction purposes. It is the end-user's degree of overall satisfaction that determines the quality of a product. Therefore, the performance of structural timber cannot solely be defined by mechanical properties. Geometric performance (warp) must be improved if timber is to continue as an important building material.An experimental study of the spatial variation in warp and bending properties of fast-grown Norway spruce is introduced. In this paper, the growth characteristics are presented as a function of stand and location in the tree. The knot area ratio (KAR) was considerably higher in the core (0.31) compared with timber closer to bark (0.21). The top log studs had higher KAR (0.38) than the corresponding butt log studs (0.31). The average grain angle was 3.5% ( 2°) and appeared not to vary radially. The presence of compression wood was much more common in the top log timber (75%) than in the butt log (44%). However, no consistent radial variation in compression wood was found.The authors gratefully acknowledge the support from EEC Forest programme, Contract No. MA2B-0024 and from Södra Timber AG from NUTEK project No. 9100554     

Pathogenicity of Ceratocystis resinifera to Norway spruce

The blue‐stain fungus Ceratocystis resinifera colonizes wounds on living Picea spp. and other conifers in Europe and North America. Little is known regarding the pathogenicity of this fungus and consequently, four Norwegian C. resinifera isolates were inoculated on to Norway spruce (Picea abies) using two different techniques. These included single‐point inoculations on young trees (two inoculations per tree on 14‐year‐old trees) and mass‐inoculations on older trees (～200 inoculations per tree on 34‐year‐old trees). In both experiments, C. resinifera induced minor symptoms that in most cases did not differ significantly from inoculation with sterile agar. The virulent blue‐stain fungus C. polonica, which was inoculated for comparative purposes, induced extensive symptoms, causing 83% dead cambium circumference and 82% blue‐stained sapwood, and long necrotic lesions in the phloem. The results suggest that C. resinifera is non‐pathogenic or only mildly pathogenic to Norway spruce and does not present a threat to these trees.     

Quality of timber products from Norway spruce

Summary Strength and stiffness together with some properties characterizing the stand and the growth of trees were studied. Specimens (45 × 70 × 2900 mm³) were cut from different radial and longitudinal positions, from fast-grown trees from two stands in southern Sweden. These trees had relatively large annual rings (4–6 mm) and were not representative of Norway spruce in Sweden but are an example of the intensivelymanaged stands which will probably constitute a substantial part of the raw material supply in the future.The results indicate that the mean values for strength and stiffness were lowest for the core studs and increased further away from the pith. This radial variation in strength and stiffness appears to be associated with the variation in ring width. Density alone, on the other hand, does not explain the radial variation but should be used together with either ring width or knot area ratio to explain the stiffness and strength respectively. The increase in the strength and stiffness of the core studs from the butt logs to the top logs was significant. Density alone was found to be the best variable to explain the longitudinal variation between the butt logs and the top logs. The heartwood formation in the butt log juvenile core appeared not to have a positive effect on strength and stiffness. The occurrence of compression wood, the magnitude of grain angle and the margin knot area ratio had only a minor effect on strength and stiffness.The authors gratefully acknowledge the support received from the EEC forest research programme, Contract no MA2B-0024, from NUTEK, project no 9100554 and from Södra Timber AB     

Optimal management of uneven-aged Norway spruce stands

An optimization model is specified to analyze forest management without any restrictions on the forest management system. The data on forest growth comes from unique field experiments and is used to estimate a nonlinear transition matrix or size-structured model for Norway spruce. The objective function includes detailed harvesting cost specifications and the optimization problem is solved in its most general dynamic form. In optimal uneven-aged management, stand density is shown to be dominated by limitations in natural regeneration. If the goal is volume maximization, even-aged management with artificial regeneration (and thinnings from above) is superior to uneven-aged management. After including regeneration and harvesting costs, the interest rate, and the price differential between saw timber and pulpwood, uneven-aged management becomes superior to even-aged management. However, in the short term the superiority is conditional on the initial stand state.     

Quality of timber products from Norway spruce

Summary In a previous paper in this series it was concluded that the warp (twist, crook and bow) of structural timber products is of utmost importance for end-user satisfaction. In this paper, a study of the spatial variation of warp of fast-grown Norway spruce is presented. The material, 372 studs (45 × 70 × 2900 mm²), was cut from different radial and longitudinal positions in trees from two stands.The results indicated that twist and crook were at maximum near the pith. However, twist decreased much more rapidly with the distance from pith compared with crook. Crook associated with core studs was larger in the butt log than in the top log, while twist and bow in core studs appeared not to vary longitudinally. Heartwood formation in the butt log juvenile core did not diminish warp propensity. Twist was rather well correlated to the distance between pith and centroid of cross section. The ratio of grain angle to pith distance was the best parameter to predict twist. Presence of compression wood increased bow and crook significantly, while ring width, density and knot area ratio did not substantially contribute to explain warp variation.A moisture content change from 18% to 12% decreased the overall acceptability, expressed by stud grade yield, from 76% to 43%. Thus, timber products should be delivered at a moisture level close to the one expected in the finalized building in order to avoid excessive warp after delivery.The authors gratefully acknowledge the support from EEC Forest programme, Contract No MA2B-0024, from NUTEK project No 9100554 and from Södra Timber AB     

Boron retranslocation in Scots pine and Norway spruce

We previously traced 10B-enriched boric acid from shoots to roots to demonstrate the translocation of boron (B) in Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) seedlings. To gain a more detailed understanding of B translocation, we sought: (1) to demonstrate B retranslocation directly, by showing that foliar-applied 10B is located in the new growth after dormancy; and (2) to assess whether shoot-applied B affects growth in the long term. We applied 10B-enriched boric acid to needles of Scots pine and Norway spruce seedlings. After a dormancy period and 9 weeks of growth, small but significant increases in the 10B isotope were found in the new stem and needles of both species. In Scots pine, the total B concentration of the new stem was also increased. Both species contained polyols, particularly pinitol and inositol. Boron-polyol complexes may provide a mechanism for mobilizing B in these species. To determine the long-term effects of applied B, seedlings were grown for two growing seasons after the application of 10B to shoots. In Norway spruce, the proportion of 10B in the root systems and current needles of the harvest year was slightly higher than in the controls, and in Scots pine root systems, marginally so. The B treatment had no effect on growth of Norway spruce seedlings. In Scots pine seedlings, the B treatment caused a 33% increase in total dry mass and significantly increased the number of side branches.     

Ectomycorrhizas and cadmium toxicity in Norway spruce seedlings

We studied the effects of ectomycorrhizal colonization by Laccaria bicolor (Maire) Orton S238 and Paxillus involutus (Batsch) Fr. 533 on cadmium (Cd) toxicity in Norway spruce seedlings (Picea abies (L.) Karst.). Both mycorrhizal and nonmycorrhizal seedlings were exposed to 0 (control), 0.5 or 5 &mgr;M CdSO(4) for 9 weeks in a sand culture system with frequent addition of nutrient solutions. In pure culture, P. involutus and L. bicolor showed similar Cd tolerance. However, in symbiosis, the Cd treatments decreased colonization by L. bicolor but not by P. involutus. Paxillus involutus ameliorated the negative effects of 0.5 &mgr;M Cd on shoot and root growth and chlorophyll content of old needles, whereas L. bicolor did not. Mycorrhizal colonization did not affect Cd concentrations of old needles and roots of seedlings. Despite differences between the ectomycorrhizal fungi in colonization and ability to alleviate Cd toxicity of seedlings, both species reduced Cd concentrations of young needles to a similar degree compared with nonmycorrhizal seedlings. However, in the 0.5 &mgr;M Cd treatment, the Cd content of needles of seedlings colonized by P. involutus was increased, whereas the Cd content of needles of seedlings colonized by L. bicolor was similar to that of needles of nonmycorrhizal seedings. When the amount of Cd translocated to needles was expressed on a root length basis to account for differences in the size of the root systems, the amount of Cd translocated to the needles was similar in seedlings mycorrhizal with P. involutus and in nonmycorrhizal seedlings. All mycorrhizal seedlings were similarly affected by 5 &mgr;M Cd, indicating that the amelioration efficiency of ectomycorrhizal fungi is dependent on the metal concentration to which the roots are exposed. Concentrations of P, K, Ca, Mg and Mn were decreased by 5 &mgr;M Cd to a similar extent in both nonmycorrhizal and mycorrhizal seedlings. In contrast to L. bicolor, P. involutus increased P uptake and altered patterns of root branching. We conclude that mycorrhizas alleviate Cd-induced reductions in growth of Picea abies seedlings. Although the two mycorrhizal fungi examined differed in their ability to alleviate Cd toxicity, these differences were not related to differences in Cd uptake or translocation to the shoot of the mycorrhizal seedlings. We suggest that amelioration of Cd toxicity by P. involutus may be a result of improved P nutrition or changes in root morphology, or both.     

Stand responses to initial spacing in Norway spruce plantations in Norway

Abstract

Using data from nine spacing experiments of Norway spruce (Picea abies (L.) Karst.) in Norway, covering wide ranges of site index and initial spacing, this study evaluated stand basal area and volume responses to initial spacing and examined whether these responses varied by stand ages or site quality. We developed nonlinear regression models that described the standing basal area or volume responses to initial spacing along with site index and stand ages. The results show that closer spacings produced higher standing basal area and volume than wider spacings. The response curves are highly nonlinear in younger stands and become nearly linear in mid-rotation stands, indicating stronger responses at younger ages and weaker responses as age increases. Furthermore, for young stands, spacing effects are stronger at closer than at wider spacings. The basal area and volume responses to initial spacing tend to be similar across site indices. However, the interaction of site index and stand age on spacing responses makes it difficult to isolate the effect of site index on spacing responses. Mortality is higher and begins earlier at closer spacings than wider. The mean diameter of the largest 100, 400, 600, and 800 trees ha^?1 increased with spacing in three out of the nine experiments. Dominant height did not vary by initial spacing for any of the experiments. The findings suggest that the extra volume production in stands of closer initial spacing is restricted to early stand development.     

Fungi on spruce needles in Norway II

Tiarosporella parca has been found in different plots in Norway, mostly in small amounts. However, in Pasvik, East-Finnmark, this species was rather common and replaced the otherwise most common species, Lophodermiumpiceae.     

Allometry varies among related families of Norway spruce

Key message

Slopes and intercepts of allometric equations for organs’ biomass varied among half-sib families of Norway spruce and between age categories in a family-dependent manner. Genetic variation should be accounted for when applying allometric analysis to mixtures of genetic groups.

Context

Genetic variation in relationships among plant biomass components was rarely addressed in trees, though depending on deployment strategies in tree improvement programs, variation among genetic groups in plant organs’ growth rates, and thus biomass allocation, would affect forest growth and carbon balance.

Aims

We investigated growth and biomass distribution in Norway spruce (Picea abies [L.] H. Karst) half-sib families. We assumed invariance among families in allometric relationships, and stability in growth rates of different organs between ages 2 and 8 years in the subset of those families. We also tested for ontogenetic trend in allometry using the independent dataset of biomass at age 21 years.

Methods

We analyzed allometric relationships among plant components using standardized major axis regression.

Results

Slopes and intercepts of allometric relationships varied among families, indicating variation in both organs’ growth rates and biomass partitioning at a given plant size. Variation in scaling exponents between age categories was also dependent on the family and plant organ considered.

Conclusion

Variation in slopes of allometric relationships indicates that a single scaling coefficient should not be applied when different genetic groups are compared. For the interpretation of age effect on biomass partitioning, both slopes and intercepts of allometric relationships should be examined.

     

Interactions between soil scarification and Norway spruce seedling types

Interactions between scarification treatments and seedling types of Norway spruce were examined at two different locations in southern Sweden. The scarification treatments were not scarified control, mounding and soil inversion and the seedling types were a 10 week-old containerized seedling (mini seedling), a 2 year-old containerized seedling and a 2 year-old hybrid seedling, grown as a containerized seedling the first year and as a bare-root seedling the second year. Site preparation intensity had a greater effect on the mini seedlings. The results indicated that mini seedlings established faster in the soil inversion treatment compared to the larger seedling types. At the same seedling age, the mini seedlings had faster or similar growth rate as the containerized and the hybrid seedlings regardless of scarification treatment. Although mini seedlings grew as well as or even better than larger seedlings if they were successfully established, they were more sensitive to their planting environment and proper handling was critical. Problems with frost heaving and competing vegetation have to be taken into consideration when choosing site preparation method and seedling type.     

Summer drought: a driver for crown condition and mortality of Norway spruce in Norway

Summer drought, i.e. unusually dry and warm weather, has been a significant stress factor for Norway spruce in southeast Norway during the 14 years of forest monitoring. Dry and warm summers were followed by increases in defoliation, discolouration of foliage, cone formation and mortality. The causal mechanisms are discussed. Most likely, the defoliation resulted from increased needle‐fall in the autumn after dry summers. During the monitoring period 1988–2001, southeast Norway was repeatedly affected by summer drought, in particular, in the early 1990s. The dataset comprised 455 ‘Forest officers’ plots’ with annual data on crown condition and mortality. Linear mixed models were used for estimation and hypothesis testing, including a variance–covariance structure for the handling of random effects and temporal autocorrelation.