Effect of organic matter on the parameters of the selective sorption of cobalt and zinc by soils and their clay fractions

The sorption and ion-exchange behavior of Co(II) and Zn in the soil-equilibrium solution system was studied for different types and varieties of native soils and their clay fractions before and after mild oxidation with H₂O₂ to remove the organic carbon. The parameters of the ion-exchange adsorption and the selectivity coefficients of the (Co(II), Zn)/Ca ion exchange were determined using different models for describing the relationship between the dissolved and sorbed forms of the metals. These were the empirical Langmuir and Freundlich adsorption isotherms and the model of the ion-exchange adsorption based on the acting mass law. It was found that the soil organic matter played an important role in the selectivity of the ion-exchange adsorption of Co(II) and Zn by the soils and their clay fractions. This was confirmed by an abrupt decrease (to almost 1) of the selectivity coefficients of the Co²⁺/Ca²⁺ and Zn²⁺/Ca²⁺ exchange after the treatment of the clay fraction with hydrogen peroxide.     

Influence of copper on the adsorption and desorption of paraquat, diquat, and difenzoquat in vineyard acid soils

Retention of the cationic herbicides paraquat (PQ), diquat (DQ), and difenzoquat (DFQ) in two vineyard soils with a different management history and retention capacity was examined. The influence of copper on the ability of the soils to retain the herbicides was determined by comparing the results of adsorption and desorption tests on untreated and Cu-enriched soil samples, and also on soils that were previously treated with EDTA to extract native copper. The three herbicides were strongly adsorbed by both soils. Soil 1 exhibited linear adsorption isotherms for PQ and DFQ with partition coefficients, KD, of 1.28 x 103 and 1.37 x 103 L kg-1, respectively, and a Freundlich-type isotherm for DQ with a linearized partition coefficient, KD*, of 1.01 x 103 L kg-1. On the other hand, soil 2 exhibited curved isotherms and smaller KD* values (viz. 106, 418, and 28 L kg-1 for PQ, DQ, and DFQ, respectively). Using EDTA to extract copper from the soils released new sites for the herbicides to bind. The three herbicides exhibited strong hysteresis in the adsorption-desorption process. Extracting copper decreased the percent desorption of PQ and DQ; on the other hand, it decreased the affinity of DFQ for the resulting vacant adsorption sites. Similarly, competitive adsorption tests with copper and the herbicides revealed that the metal was only capable of displacing DFQ from adsorption sites. The behavior of this herbicide in the soils was consistent with a specific adsorption model. The disparate behavior of the two soils toward the herbicides was a result of the adsorption sites in soil 1 being less extensively occupied than those of soil 2 in the adsorption tests. The effect of copper on the adsorption of DFQ in the two soils was acceptably reproduced by an adsorption model involving Coulombic and specific sorption with competition from the metal.     

Retention of copper, cadmium and zinc in soil and its textural fractions influenced by long-term field management

The present study investigated the impact of long‐term soil management on the metal retention capacity of soil. We examined the sorption behaviour of Cu, Cd and Zn in soils and in the various particle‐size fractions of these soils, which had been amended with farmyard manure, mineral fertilizers or were fallow for 38 years in a long‐term field experiment. The soils investigated contained different amounts and origins of organic matter and differed in soil pH, but the mineral phase showed less response to the different soil managements. Batch adsorption and desorption experiments as well as a sequential fractionation schema, which defines seven geochemical fractions, were used to investigate the retention properties of soil. Sequential extraction was conducted with original as well as with metal‐spiked soils. Results showed that amounts of Cu, Cd and Zn retained differed by a factor of more than 3 among the treatments in the long‐term field experiment, when a massive concentration of metal was added to soil. An increased sorption on smaller particle size fractions occurred (clay ≫ silt > fine sand ≥ coarse sand) due to the larger surface area as well as the greater carbon content in the smaller fractions. Soil sorption behaviour in another long‐term field experiment was estimated based on the present particle‐sorption data. Differences in the sorption behaviour were related to differences in soil mineralogy and amounts of Fe‐ and Mn‐oxides. Fractionation of the original and the metal‐spiked soil underlined the contribution of organic matter to sorption capacity (sequence: Cu ≫ Cd > Zn). Different organic matter contents and a different soil pH considerably changed the amounts of metals in the defined geochemical fractions. Freshly added Cu, Cd and Zn ions were found mainly in more mobile fractions. In contrast, metals in non‐spiked soils appeared in less‐mobile fractions reflecting their long‐term sorption behaviour.     

Response of the sorption behavior of Cu,Cd, and Zn to different soil management

This study investigated the effect of different farming practices over long time periods on the sorption‐desorption behavior of Cu, Cd, and Zn in soils. Various amendments in a long‐term field experiment over 44 y altered the chemical and physical properties of the soil. Adsorption isotherms obtained from batch sorption experiments with Cu, Cd, and Zn were well described by Freundlich equations for adsorption and desorption. The data showed that Cu was adsorbed in high amounts, followed by Zn and Cd. In most treatments, Cd ions were more weakly sorbed than Cu or Zn. Generally, adsorption coefficients K_F increased among the investigated farming practices in the following order: sewage sludge ≤ fallow < inorganic fertilizer without N ≈ green manure < peat < Ca(NO₃)₂ < animal manure ≤ grassland/extensive pasture. The impact of different soil management on the sorption properties of agricultural soils for trace metals was quantified. Results demonstrated that the soil pH was the main factor controlling the behavior of heavy metals in soil altered through management. Furthermore, the constants K_F and n of isotherms obtained from the experiments significantly correlated with the amount of solid and water‐soluble organic carbon (WSOC) in the soils. Higher soil pH and higher contents of soil organic carbon led to higher adsorption. Carboxyl and carbonyl groups as well as WSOC significantly influenced the sorption behavior of heavy metals in soils with similar mineral soil constituents.     

Modelling the effects of ageing on Cd,Zn, Ni and Cu solubility in soils using an assemblage model

Ageing reactions can reduce trace metal solubility and can explain natural attenuation of contaminated soils. We modelled ageing reactions in soil with an assemblage model that considers slow reactions in Fe‐oxyhydroxides and reversible sorption on organic matter and clay minerals. Metal adsorption kinetics on Fe‐oxyhydroxides was obtained from data with synthetic oxyhydroxides. Metal solubility and isotopic exchangeability data were obtained from 28 soils amended with Ni, Zn, Cu and Cd metal salts and monitored for 850 days. The assemblage model was constructed in WHAM 6.0 and used soil properties and dissolved organic matter as input data. The model was first validated to predict dissolved metal concentrations, based on the concentration of isotopic exchangeable metals. The model overestimated metal solubility without parameter adjustment by mean factors of 4–7, and successful fits were obtained by increasing the specific surface area of Fe‐oxyhydroxides from measured values of synthetic systems to a value of 600 m² g^?1 recommended by other authors. The effect of ageing on the isotopic exchangeable metal fraction was subsequently modelled starting from the predicted fraction of metals present on Fe‐oxyhydroxides immediately after soil spiking. The observed isotopic exchangeable metal fractions of Ni, Zn and Cd agreed reasonably well with predicted values. The model predicts that ageing reactions are more pronounced at higher pH because metal sorption is increasingly directed to oxyhydroxide surfaces with increasing soil pH. Modelling fixation of Cu requires more information on fixation of that metal in organic matter.     

复垦沉积池土壤中镍、铅、锌的吸附

The wastes used to amend soils sometimes have high concentrations of metals such as nickel (Ni), lead (Pb) and zinc (Zn). To determine the capacity of soils to retain these metals, the sorption capacities of different mine soils with and without reclamation treatments (tree vegetation and waste amendment) for Ni, Pb and Zn in individual and competitive situations were evaluated using the batch sorption technique. The untreated settling pond soil had low capacity for Ni, Pb and Zn retention. The site amended with wastes (sewage sludges and paper mill residues) increased the sorption capacity most, probably because of the higher concentrations of soil components with high retention capacity such as carbon and clay fraction. No significant competition was observed between metals in the competitive sorption experiment, indicating that the maximum of sorption was not achieved by adding 0.5 mmol L^-1 of metal. We can conclude that, despite the possible additions of Ni, Pb and Zn from wastes to degraded soils, sewage sludges and paper mill residues have a high sorption capacity that would prevent the metals from being in a mobile form.     

Sorption of lead,copper, zinc,and cadmium by soils: effect of nitriloacetic acid on metal retention

Abstract

Laboratory experiments were carried out to evaluate lead (Pb), copper (Cu), zinc (Zn), and cadmium (Cd) sorption‐desorption by three soils of contrasting characteristics. Talamanca (silt loam, montmorillonite, Calcic Haploxeralfs), Mazowe (clay, kaolinite, Rhodic Kandiustalf), and Realejos (sandy silt loam, allophane, Typic Hapludands). A second objective was to study the effect of nitriloacetic acid (NTA) on the sorption process. The Talamanca soil, which had a native pH of 6.4 and presented the highest effective cation exchange capacity (ECEC), sorbed more of each of the metal tested than did the other two soils. When the other two soils were compared metal sorption was also related to pH and ECEC. The very low sorption capacity showed by Realejos may be attributed to the low net surface negative charge density of this soil, arising from its allophanic nature. A common feature of the three soils was the relative strong sorption of both Pb and Cu relative to Cd and Zn with Pb showing the highest sorption levels. The selectivity sequences of metals retention were Pb>Cu>Zn>Cd for Talamanca soil, Pb>Cu>Zn≈Cd for Mazowe, and Pb>Cu>Cd>Zn for Realejos. Metal desorption values were low. The order of metal desorption (Cd≈Zn>Cu>Pb) was the same for the three soils studied. Quantitative differences observed in the extractability of the sorbed metals between the soils (Realejos>Mazowe>Talamanca) indicated that soil properties which enhanced metal sorption contributed at the same time to slow down the backward reaction. The addition of NTA to the soil suspension significantly depressed metal sorption by the three soils investigated. Compared with the free ligand system Pb, Cu, Zn, and Cd sorption in the presence of NTA decreased roughly 50%.     

Adsorption density,mobility and limit values of Cd,Zn, Cu and Pb in acid forest soils

To investigate Cd, Zn, Cu and Pb adsorption in acidified forest soils, six soil samples of the aluminium buffer range were selected and analyzed for their physical and chemical properties. Determination of the specific surface area using ethylene glycol monoethyl ether (EGME) adsorption yielded a characteristic value of the solid phases, which can parameterize the major properties of the various soil constituents with sufficient accuracy.

Traditional adsorption isotherms reveal the relation between the amount of a heavy metal adsorbed and the heavy metal concentration in the soil solution only for the soil under study and can therefore not be applied to other soils. To meet the aim of modelling heavy metal adsorption and mobility also for soils differing greatly in their properties, it was attempted to establish a generalizing adsorption isotherm for soils of entirely different composition of the solid phase. The generalizing adsorption density isotherms introduced in the following provide a useful mathematical model for the quantity/intensity relation of heavy metals in soils that differ greatly in their specific surface area and their composition.

It is also shown that limit values which take into account the major quantities influencing heavy metal adsorption and mobility in acid soils can be established from the regression equation between the adsorption density of a heavy metal (ions/m² specific surface area) and its concentration in the soil solution. In particular in view of the groundwater contamination to be expected if acid rain and, as a result, soil acidification continues, these limit values seem to provide considerably more information than the European limit values, given in mg heavy metal /kg soil, which are presently valid for any soil condition and property.     

胶体存在时不同质地土壤对锌镉的吸附试验研究

以重金属离子Zn和Cd及胶体为对象,通过等温静态批量平衡吸附试验,分析了3种不同质地土壤对Zn、Cd单一吸附和等量竞争吸附特征,胶体对土壤吸附Zn、Cd的影响,并用Langmuir和Freundlich方程对试验结果进行了拟合。结果表明,随着平衡液中Zn2+、Cd2+浓度的增加,土壤对Zn、Cd的吸附量逐渐增大;3种质地土壤对Zn、Cd吸附量顺序为砂壤>粉壤>壤砂土;Zn2+、Cd2+共存时,土壤对这两种离子的吸附量比单一离子存在的情况下明显下降;胶体存在时抑制了土壤对Zn的吸附,促进了土壤对Cd的吸附;就本试验来说,Freundlich方程拟合效果优于Langmuir方程。     

不同土地利用方式土壤对铜、镉离子的吸附解吸特征

采用一次平衡法对Cu²⁺、Cd²⁺在城市及城郊农田、林地、草地3种土地利用方式土壤中的吸附解吸过程进行比较研究, 结果表明: Cu²⁺、Cd²⁺在3种土地利用方式土壤中的吸附量均随平衡液浓度的增加而增大, Cu²⁺、Cd²⁺在农田土壤上的吸附量均高于林地和草地土壤。分别用Langmuir和Freunlich两种等温吸附方程对吸附过程进行拟合, 3种土壤对Cu²⁺的吸附过程运用Langmuir方程拟合效果好, 而对Cd²⁺的吸附过程运用Freunlich方程拟合效果更好。Cu²⁺在3种土壤的解吸量大小顺序为农田>林地>草地, Cd²⁺在3种土壤的解吸量大小顺序为农田>草地>林地。两种离子在3种土壤中的动态吸附是个快速反应的过程, 随时间延长, 吸附反应趋于平衡。运用双常数函数方程和Elovich方程能较好地拟合重金属在土壤上的吸附动力学过程。Cu²⁺、Cd²⁺的吸附与土壤黏粒含量、有机质含量、CEC和pH均有关。     

General purpose Freundlich isotherms for cadmium,copper and zinc in soils

Assessing the accumulation and transport of trace metals in soils and the associated toxicological risks on a national scale requires generally applicable sorption equations. Therefore Freundlich equations were derived for Cd, Zn and Cu using multiple linear regression on batch sorption data from the literature with a wide variety of soil and experimental characteristics, and metal concentrations ranging over five orders of magnitude. Equations were derived based on both total dissolved metal concentrations and free metal activities in solution. Free metal activities were calculated from total metal concentrations taking into account ionic activity, and inorganic (all metals) and organic complexation (Cu only). Cadmium and Zn were present in solution predominantly as free ions, while Cu was present as organic complexes. Since actual dissolved organic carbon (DOC) concentrations were not available they were estimated using an empirical field relation between DOC and organic matter content. The logarithmic transformation of the Freundlich constant for Cd was regressed on the logarithmic transformations of cation exchange capacity (CEC) (H⁺) and dissolved Ca, and for Zn with CEC and (H⁺). For Cu the log–log regression model of the Freundlich constant included the solid:solution ratio of the batch to account for dilution of DOC in the batch as compared with the field. The explained variance for the fitted Freundlich equations was 79% for Cd, 65% for Cu and 83% for Zn, using log-transformed adsorbed concentrations and soil solution activities. The Freundlich adsorption models underestimated metal contents determined from 1 m HNO₃ digestion on field samples, up to a factor of 6 (Cd and Cu) or 10 (Zn).     

Competitive sorption of cadmium and lead in acid soils of Central Spain

The bioavailability and ultimate fate of heavy metals in the environment are controlled by chemical sorption. To assess competitive sorption of Pb and Cd, batch equilibrium experiments (generating sorption isotherms) and kinetics sorption studies were performed using single and binary metal solutions in surface samples of four soils from central Spain. For comparisons between soils, as well as, single and binary metal solutions, soil chemical processes were characterized using the Langmuir equation, ionic strength, and an empirical power function for kinetic sorption. In addition, soil pH and clay mineralogy were used to explain observed sorption processes. Sorption isotherms were well described by the Langmuir equation and the sorption kinetics were well described by an empirical power function within the reaction times in this study. Soils with higher pH and clay content (characterized by having smectite) had the greatest sorption capacity as estimated by the maximum sorption parameter (Q) of the Langmuir equation. All soils exhibited greater sorption capacity for Pb than Cd and the presence of both metals reduced the tendency for either to be sorbed although Cd sorption was affected to a greater extent than that of Pb. The Langmuir binding strength parameter (k) was always greater for Pb than for Cd. However, these k values tended to increase as a result of the simultaneous presence of both metals that may indicate competition for sorption sites promoting the retention of both metals on more specific sorption sites. The kinetic experiments showed that Pb sorption is initially faster than Cd sorption from both single and binary solutions although the simultaneous presence of both metals affected the sorption of Cd at short times while only a minor effect was observed on Pb. The estimated exponents of the kinetic function were in all cases smaller for Pb than for Cd, likely due to diffusion processes into micropores or interlayer space of the clay minerals which occurs more readily for Cd than Pb. Finally, the overall sorption processes of Pb and Cd in the smectitic soil with the highest sorption capacity of the studied soils are slower than in the rest of the soils with a clay mineralogy dominated by kaolinite and illite, exhibiting these soils similar sorption rates. These results demonstrate a significant interaction between Pb and Cd sorption when both metals are present that depends on important soil properties such as the clay mineralogy.     

Heavy metal species,mobility and availability in soils

The ecological effects of heavy metals in soils are closely related to the content and speciation of the elements in the solid and liquid phases of soils. Methods for the determination of metal species in both phases are described and critically evaluated. In connection with the possible binding mechanisms of heavy metals in soils the concept of specific and non-specific adsorption is discussed. Recent results indicate that the adsorption of heavy metals on soil particles is not only restricted to the formation of surface complexes but can also take place in the interior of minerals. Diffusion processes of heavy metals into soil minerals are described for goethite. In order to assess metal mobility and availability in soils, the concentration and speciation of metals in the soil solution or in comparable aeqeous equilibrium solutions of soil samples and the transfer of metals from solid pools to the liquid phase and vice versa have to be assessed. Methods for the determination of the amount of plant available heavy metals are described and the associated problems discussed.     

Lability and sorption of heavy metals as related to chemical,physical, and mineralogical characteristics of highly weathered soils

Purpose  

Heavy metal lability, probably, is the most important isolated factor to cause toxicity in plants and organisms in soils. Sorption of heavy metals, in turn, affects directly the amount of their labile forms in soils. Therefore, to assess sorption and quantify labile forms of Cd, Cu, Ni, Pb, and Zn, adsorption and incubation studies were carried out.     

热带地区强风化土壤表面的化学反应以及土壤管理的合理建议

Highly weathered soils are distributed in the humid and wet-dry tropics, as well as in the humid subtropics. As a result of strong weathering, these soils are characterized by low activity clays, which develop variable surface charge and related specific properties. Surface reactions regarding base exchange and soil acidification, heavy metal sorption and mobility, and phosphorus sorption and availability of the tropical highly weathered soils are reviewed in this paper. Factors controlling surface reactivity towards cations and anions, including ion exchange and specific adsorption processes, are discussed with consideration on practical implications for rational management of these soils. Organic matter content and pH value are major basic factors that should be controlled through appropriate agricultural practices, in order to optimise favorable effects of colloid surface properties on soil fertility and environmental quality.     

The adsorption characteristics of soils and removal of cadmium and nickel from wastewaters

The interactions between the adsorption characteristics of 27 experimental soils and the sorption of Cd and Ni from the municipal wastewaters were investigated in this study. The removal of these elements from soil solution was followed for 50 days. All the adsorption characteristics, except cation exchange capacity and organic matter, were significantly correlated to the sorption of Cd after one day shaking. After 7 days of shaking, none of the soil adsorption characteristics except free CaCO₃ was significantly correlated to Cd removal from wastewater. The soil saturated paste pH and suspension pH were strongly correlated to Cd sorption throughout this experiment. The behavior of Ni in soils was different from that of Cd. Surface area, total Fe, and total Al were significantly correlated to Ni sorption. The correlation between Ni removal and pH was the strongest than any other parameter studied. After 7 days shaking, clay content and total Ca were not significantly correlated to Ni sorption. The cation exchange capacity of the soils was not significantly correlated to Cd or Ni sorption in this experiment. It seems that in the experimental soils, concentration of Cd and Ni were probably not controlled by adsorption process. The precipitation process was probably playing a major role in the removal of these elements from the municipal wastewaters. As observed in this experiment, the cation exchange capacity of experimental soils was a poor parameter to define sorption capacity of these soils for Cd and Ni. The guidelines for determining the soil sludge load, which are mainly based on the cation exchange capacity of soils, should be revised.     

Adsorption and solubility of ten metals in soil samples of different composition

We conducted batch experiments for ten metals [Mg, Cr(III), Fe(III), Co, Ni, Cu, Zn, Sr, Cd, Pb] and four soil samples of different composition to determine the relation of the soluble fraction (’intensity’︁) to an adsorbed or precipitated metal pool (’quantity’︁) and, thus, to investigate the buffer function of soils. The soil samples were spiked with 6 to 12 exponentially increasing metal doses added as metal nitrates. The native metal pool involved in sorption processes was characterized by an extraction with 0.025 M (NH₄)₂EDTA (pH 4.6). The quantity-intensity (Q/I) relations of eight metals [except Cr(III) and Fe(III)] were governed by sorption and complexation processes and can be fitted by Freundlich isotherms. Q/I relations for Cr(III) and two soils indicate a sorption maximum, which can be approximated with the Langmuir isotherm. In a calcareous soil high Cr doses induced the precipitation of a Cr oxide. The solution concentrations of Fe are primarily a function of the pH-dependent solubility of ferrihydrite. For all metals pH was the predominant factor controlling the partitioning between the solid and the liquid phase. Drastic losses in the buffer function of soils primarily occurred in the slightly acidic range. Furthermore, adsorption was also metal specific. On the basis of median Freundlich K values, adsorption increased in the order [median K_F values and K_F range (mg kg^—1) in brackets]: Mg (2.9: 0.9—19) < Sr (4.7: 0.6—21) << Co (17.7: 1.1—143) < Zn (26.7: 1.8—301) = Ni (27.6: 2.4—120) < Cd (71: 2.5—405) << Cr(III) (329: 45—746) < Cu (352: 30—1200) < Pb (1730: 76—4110).     

Distribution coefficients of Cd, Co, Ni, and Zn in soils

Batch adsorption experiments were conducted with a mixture of solutes at low equilibrium concentrations of Cd (0.7-12.6 μg1⁻¹), Co (18-118μg1⁻¹, Ni (22-330 μg 1⁻¹), and Zn (40-1480 μg1⁻¹) in 38 different soils. Statistical correlations indicated that metal sorption onto the soils was influenced by the presence of clays and hydrous oxides of Fe and Mn. Based on calculated distribution coefficients for these metals, Co will generally exhibit the highest mobility in soils, but the mobility of Zn will increase faster with decreasing pH. Two types of empirical relationships are developed from these data to estimate values for the distribution coefficients.     

The relative affinities of Cd,Ni and Zn for different soil clay fractions and goethite

Cadmium, Ni and Zn ions in aqueous solution were allowed to react with clay fractions (< 2 μm) separated from soils with a wide range of mineralogical composition and properties. Sorbed metals were separated into two components, termed specifically and non-specifically bound, by a controlled washing procedure using 10^?2M Ca(NO₃)₂.Sorption reactions were characterized by Δ pH₅₀ values, by shapes of adsorption curves, and by measuring separation factors and distribution coefficients under prescribed conditions. Three reaction types were identified, viz., (i) those associated with soil adsorbing surfaces dominated by iron oxides; these appear to be controlled by mechanisms which involve metal-ion hydrolysis and result accordingly in relative sorption affinities of Zn > Ni > Cd; (ii) those associated with organic surfaces for which metal-ion hydrolysis was of little significance and little difference in metal-ion affinity was evident; at lower pH-values, Cd and Ni were somewhat preferred over Zn, with the converse at higher pH-values; (iii) those associated with 2:1 layer lattice silicates which exhibit greater preference for Zn, i.e., Zn >> Ni, Cd and higher affinities for each metal at lower pH-values (< 5) than is shown by clays dominated by iron oxides. There was also evidence of greater relative affinity for Ni shown by clay fractions dominated by fine kaolinites when compared with other clays.This investigation has shown that a range of sorption processes are involved in reactions of heavy metals with soils. We caution against undue emphasis on any particular sorption process in developing theoretical sorption models as a basis of understanding and solving problems connected with pollution and plant nutrition; we also stress the need for studies with colloids separated from soils in conjunction with those using synthetic adsorbents as models for soil constituents.     

Forms of heavy metal compounds in soils of the steppe zone

A parallel scheme of extractions was used for determining heavy metal compounds in uncontaminated and artificially contaminated soils of Rostov oblast. A method for calculating the contents of complex and specifically adsorbed metal compounds from the difference in their concentrations in different extracts was suggested. It was found that the portion of firmly fixed metal compounds decreases and the portion of potentially mobile (exchangeable, complex, and specifically adsorbed) metal compounds increases with an increase in the degree of contamination of chernozems and chestnut soils with lead, copper, and zinc over a one-to two-year-long observation period. This was due to the capacity of heavy metal ions to substitute for the exchangeable cations in the exchange complex of the studied soils, to form complexes with the soil organic matter, and to participate in the specific adsorption. Some differences in the behavior of different metals were found.