Evaluating consumer acceptability and willingness to pay for various beef chuck muscles

In-home consumer steak evaluations, followed by centralized laboratory-setting auctions, were used to determine consumer (n = 74 consumers) acceptability and willingness to pay for various beef chuck muscles. The infraspinatus (IF), serratus ventralis (SV), supraspinatus (SS), and triceps brachii (TB) from the beef chuck were evaluated against LM steaks from the rib to determine price and trait differentials. Muscles from USDA Choice, boneless, boxed-beef sub-primals were aged 14 d, frozen, and cut into 2.5-cm-thick steaks. Consumers received two steaks from each muscle for in-home evaluations of uncooked steak appearance and cooked steak palatability. After in-home evaluation of steaks, consumers participated in a random nth price auction session to determine willingness to pay for those steaks. Muscles differed (P < 0.05) for overall like of appearance, like of size, like of shape, and like of leanness; LM generally rated the highest. Steaks from the LM rated highest (P < 0.05) for overall like, and steaks from the SS and SV were lowest (P < 0.05) for overall like. Juiciness and beef flavor intensity scores were highest (P < 0.05) for steaks from the LM and IF, whereas SS steaks received the lowest (P < 0.05) juiciness scores, and SS and SV steaks were rated lowest (P < 0.05) for beef flavor intensity. Average auction price differentials differed (P < 0.05) from the LM, and were -0.71 dollars, -0.79 dollars, -1.75 dollars, and -2.44 dollars/0.45 kg for the TB, IF, SS, and SV, respectively. Average appearance trait differentials and average palatability trait differentials were correlated significantly with average price differentials. Results indicate the IF and TB were acceptable to consumers as steaks but only at prices lower than the LM.     

Evaluating consumer acceptability of various muscles from the beef chuck and rib

One hundred thirty-eight consumers evaluated steaks from the complexus (CX), infraspinatus (IF), serratus ventralis (SV), supraspinatus (SS), and triceps brachii (TB) from the wholesale beef chuck; the deep pectoral (DP) from the wholesale brisket; and the longissimus thoracis (LT) from the wholesale rib. The LT was used as a reference for comparison to the other muscles. Ten USDA Choice and ten USDA Select boneless boxed beef subprimals were used for each muscle. Subprimals were aged 14 d from box date, frozen, and cut into 2.5-cm-thick steaks. Consumers rated the IF highest (P < 0.05) for overall like, tenderness, juiciness, and flavor, and assigned it the highest (P < 0.05) price/0.45 kg. The TB also was rated higher (P < 0.05) than the LT for overall like, tenderness, juiciness, flavor, and price/0.45 kg. The SV and CX were rated as being similar (P < 0.05) to the LT for overall like, tenderness, juiciness, flavor, and price/0.45 kg. Consumers rated the SS lower (P < 0.05) than the LT for tenderness, juiciness, flavor, and price. The DP was rated as the toughest, driest, and blandest (P < 0.05), resulting in assignment of the lowest (P < 0.05) price/0.45 kg. Differences in palatability ratings due to quality grade were found for several muscles; USDA Choice SV and SS were rated higher (P < 0.05) for overall like, tenderness, and juiciness than USDA Select SV and SS. For the IF, USDA Choice was rated higher (P < 0.05) for tenderness and juiciness than USDA Select. The USDA Choice TB was rated higher (P < 0.05) for juiciness, and the USDA Choice DP was rated higher (P < 0.05) for overall like, than their USDA Select counterparts. Tenderness, juiciness, and flavor ratings were correlated with overall like ratings (r = 0.84, 0.77, and 0.76, respectively) and with price (r = 0.73, 0.70, and 0.68, respectively). These results indicate the IF, TB, SV, and CX were acceptable, whereas and the SS and DP were unacceptable as steaks.     

Evaluating the point of separation, during carcass fabrication, between the beef wholesale rib and the beef wholesale chuck

This study determined whether there is a logical point of value change, related to either tenderness or consumer acceptance, at which to separate the beef carcass within the rib/chuck region. Rib/chuck rolls (RCR); (n = 30) consisting of the ribeye roll and chuck eye roll subprimals (2nd through 12th rib locations) were cut into 22 steaks each (two steaks per rib location), and Warner-Bratzler shear force and consumer purchase preference were evaluated for steaks at each rib location. Steaks from different locations of the RCR were composed of differing proportions of several muscles: longissimus muscle (LM), spinalis dorsi and multifidus dorsi (SM), and complexus (CO). The LM (4th to 12th rib) contained three tenderness regions: 7th through 12th rib, 5th and 6th ribs, and 4th rib regions (lowest, intermediate, and highest shear force values, respectively; P < 0.01). Shear force differed (P < 0.05) among rib locations for the SM (2nd to 9th rib), but no logical pattern was evident. The CO (2nd to 7th rib) was more tender toward the anterior end (P < 0.05). The region of the RCR represented by the 4th through 6th rib locations had steaks with higher weighted-average shear force (average shear force of each steak, weighted for surface area of each muscle) values than the remainder of the RCR (P < 0.05). Animal-to-animal variation in shear force was 36% greater than rib-to-rib variation in shear force; thus, statistically significant differences in tenderness among rib locations may be undetectable by consumers. Steaks (n = 330) were offered for sale at a retail supermarket and case time was monitored on each steak to determine consumer purchase preference. Steaks from the 2nd through 4th rib locations required more time to sell (P < 0.01) than steaks from the 5th through 12th rib locations. Two alternative locations for the rib/chuck separation point could be between the 6th and 7th ribs, yielding a ribeye subprimal useful in marketing a "premium quality" product, or between the 4th and 5th ribs, which would yield four more 2.5-cm ribeye steaks per carcass.     

Relationships of consumer sensory ratings, marbling score, and shear force value to consumer acceptance of beef strip loin steaks

Logistic regression was used to quantify and characterize the effects of changes in marbling score, Warner-Bratzler shear force (WBSF), and consumer panel sensory ratings for tenderness, juiciness, or flavor on the probability of overall consumer acceptance of strip loin steaks from beef carcasses (n = 550). Consumers (n = 489) evaluated steaks for tenderness, juiciness, and flavor using nine-point hedonic scales (1 = like extremely and 9 = dislike extremely) and for overall steak acceptance (satisfied or not satisfied). Predicted acceptance of steaks by consumers was high (> 85%) when the mean consumer sensory rating for tenderness,juiciness, or flavor for a steak was 3 or lower on the hedonic scale. Conversely, predicted consumer acceptance of steaks was low (< or = 10%) when the mean consumer rating for tenderness, juiciness, or flavor for a steak was 5 or higher on the hedonic scale. As mean consumer sensory ratings for tenderness, juiciness, or flavor decreased from 3 to 5, the probability of acceptance of steaks by consumers diminished rapidly in a linear fashion. These results suggest that small changes in consumer sensory ratings for these sensory traits have dramatic effects on the probability of acceptance of steaks by consumers. Marbling score displayed a weak (adjusted R2 = 0.053), yet significant (P < 0.01), relationship to acceptance of steaks by consumers, and the shape of the predicted probability curve for steak acceptance was approximately linear over the entire range of marbling scores (Traces67 to Slightly Abundant97), suggesting that the likelihood of consumer acceptance of steaks increases approximately 10% for each full marbling score increase between Slight to Slightly Abundant. The predicted probability curve for consumer acceptance of steaks was sigmoidal for the WBSF model, with a steep decline in predicted probability of acceptance as WBSF values increased from 3.0 to 5.5 kg. Changes in WBSF within the high (> 5.5 kg) or low (< 3.0 kg) portions of the range of WBSF values had little effect on the probability of consumer acceptance of steaks.     

Chilling and cooking rate effects on some myofibrillar determinants of tenderness of beef

Our objectives were to examine the effects of prerigor excision and rapid chilling vs. conventional carcass chilling of two muscles on proteolysis and tenderness during the postmortem storage, as well as the effects of fast and slow rates of cooking on myofibrillar characteristics and tenderness. The longissimus thoracis (LT) and triceps brachii (TB), long head muscles were removed 45 min after exsanguination from the left side of 12 carcasses and chilled in an ice bath to induce cold shortening (excised, rapidly chilled). At 24 h postmortem, the corresponding muscles were removed from the right side (conventionally chilled). All muscles were cut into 2.54-cm-thick steaks and assigned to one of two postmortem times (1 or 14 d), and to raw and cooking treatments. Steaks were cooked at 260 degrees C (FAST) or 93 degrees C (SLOW) in a forced-air convection oven to an internal temperature of 70 degrees C. Cooking loss, cooking time, and Warner-Bratzler shear force (WBSF) were measured on cooked steaks. Sarcomere length (SL) and the extent of proteolysis of desmin were measured on raw and cooked steaks. As expected, the excised, rapidly chilled muscles had a much more rapid (P < 0.05) temperature decline than those that were conventionally chilled. The excised, rapidly chilled treatment resulted in shorter (P < 0.05) SL, and SL was shorter (P < 0.05) in LT than in TB steaks. Raw steaks had longer (P < 0.05) SL than cooked steaks, regardless of chilling treatment. The FAST cooking resulted in shorter (P < 0.05) SL than SLOW cooking in conventionally chilled steaks, but cooking rate had no effect (P > 0.05) on SL of rapidly chilled steaks. Generally, TB steaks required longer (P < 0.05) cooking times and had higher (P < 0.05) cooking losses than LT steaks, and FAST-cooked steaks had greater (P < 0.05) cooking losses than SLOW-cooked steaks. Rapidly chilled steaks had less (P < 0.05) degradation of desmin than conventionally chilled steaks (31 vs. 41%). Aging for 14 d increased (P < 0.05) desmin degradation. Rapid chilling of muscles resulted in much higher (P < 0.05) WBSF values, whereas aging resulted in lower (P < 0.05) WBSF values. The SLOW-cooked TB steaks were more tender (P < 0.05) than FAST-cooked TB steaks and LT steaks cooked at either rate. Excised, rapidly chilled muscles underwent proteolysis, but it occurred at a slower rate during the first 24 h postmortem than it did in conventionally chilled muscles. Cooking rate did not affect tenderness of LT steaks, but SLOW cooking resulted in more tender TB steaks.     

Effects of marbling and shear force on consumers' willingness to pay for beef strip loin steaks

Experimental economic procedures were used to measure the effects of changes in marbling score and Warner-Bratzler shear force (WBSF) value on consumer purchasing behavior and willingness to pay for beef strip loin steaks (n = 541). Consumers were more likely to bid on a steak during the experimental auction if the steak had a high marbling score or low WBSF value. Averaging across all consumers in the study (n = 489), the predicted odds that consumers would submit a nonzero bid were favorable for steaks with a marbling score greater than Modest(50) or a WBSF value less than 3.9 kg. Bid prices for steaks were analyzed with respect to changes in steak marbling score, WBSF value, quality grade marketing category classification (Select, Low Choice, Premium Choice, and Prime), and WBSF marketing category classification (very tender, 5.40 kg). The percentage of bids that were zero was highest (P < 0.05) for Select steaks, intermediate (P < 0.05) for Low Choice steaks, and lower (P <0.05) for Premium Choice or Prime steaks. Steaks in the very tender category had the lowest (P < 0.05) percentage of zero bids, and steaks in the slightly tough and very tough categories had the highest (P < 0.05) percentage of zero bids submitted from "buyers" in the auction. Premium Choice and Prime steaks were valued higher (P < 0.05) than Select steaks by consumers. On average, Premium Choice steaks received a 0.89 dollars/kg premium, and Prime steaks received a 2.47 dollars/kg premium over the mean bid price for Select steaks. Predicted mean bid prices for steaks decreased by 1.02 dollars/kg for each 1 kg increase in WBSF value. On average, steaks in the very tender marketing category received a higher (P < 0.05) bid price than the bid price for steaks in the slightly tender, slightly tough, and very tough categories (+0.83 dollars/kg, +2.09 dollars/kg, and +2.55 dollars/kg, respectively). Mean bid prices for steaks from the slightly tough and very tough categories did not differ (P = 0.184). Compared with the mean bid price for steaks in the slightly tender category, steaks from the slightly tough and very tough categories were discounted (P < 0.05) by 1.26 dollars/kg and 1.72 dollars/kg, respectively. Results suggest that marbling score and WBSF influence both the probability that consumers will purchase and the price they are willing to pay for strip loin steaks.     

Characterization of certified Angus beef steaks from the round, loin, and chuck

Beef carcasses (n = 150) of A-maturity were selected randomly to determine baseline shear force and sensory panel ratings, assess variation in tenderness, and evaluate mean value differences between Certified Angus Beef (CAB), commodity Choice, and Select steaks. Three steaks were removed from the triceps brachii (TB), longissimus lumborum (LL), gluteus medius (GM), semimembranosus (SM), biceps femoris (BF), and quadriceps femoris complex (QF), and assigned to Warner-Bratzler shear (WBSF) and sensory panel analyses. As anticipated, marbling score and measured percentage of i.m. fat were greatest (P < 0.05) for CAB, intermediate (P < 0.05) for Choice, and least (P < 0.05) for Select carcasses. A muscle x quality level interaction (P < 0.05) was observed for WBSF values and sensory panel tenderness ratings. The TB, LL, GM, and BF steaks from CAB carcasses had lower (P < 0.05) WBSF than Select steaks from the same muscles. Even though WBSF values did not differ (P > 0.05) between CAB and Choice QF and TB steaks, the LL and GM steaks from CAB carcasses were more tender (P < 0.05) than Choice-grade LL and GM steaks. The TB from Select carcasses had higher (P < 0.05) WBSF values than TB steaks from CAB or Choice carcasses, but sensory panel ratings indicated that quality level showed little consistency among the GM, SM, BF, and QF. Trained sensory panelists rated CAB LL steaks more tender (P < 0.05) than LL steaks from Choice and Select carcasses, and Choice LL steaks were evaluated as more (P < 0.05) tender than those from Select carcasses. These results demonstrate that the influence of marbling on tenderness was more evident in muscles of middle meats than in end cuts, particularly in muscles of the round.     

Effects of postmortem aging and USDA quality grade on Warner-Bratzler shear force values of seventeen individual beef muscles

Forty USDA Select and 40 upper two-thirds USDA Choice beef carcasses were used to determine the effects of postmortem aging on tenderness of 17 individual beef muscles. Biceps femoris-long head, complexus, gluteus medius, infraspinatus, longissimus dorsi, psoas major, rectus femoris, semimembranosus, semitendinosus, serratus ventralis, spinalis dorsi, supraspinatus, tensor fasciae latae, teres major, triceps brachii-long head, vastus lateralis, and vastus medialis muscles were removed from each carcass. Seven steaks (2.54-cm thick) were cut from every muscle, and each steak was assigned to one of the following postmortem aging periods: 2, 4, 6, 10, 14, 21, or 28 d postmortem. After completion of the designated aging period, steaks were removed from storage (2 degrees C, never frozen), cooked to a peak internal temperature of 71 degrees C, and evaluated using Warner-Bratzler shear force (WBSF). Analysis of WBSF revealed a 3-way interaction (P = 0.004) among individual muscle, USDA quality grade, and postmortem aging period. With the exception of the Select teres major, WBSF of all muscles (both quality grades) decreased with increasing time of postmortem storage. Nonlinear regression was used to characterize the extent (aging response) and rate of decrease in WBSF from 2 through 28 d postmortem for each muscle within each quality grade. In general, WBSF of upper two-thirds Choice muscles decreased more rapidly from 2 to 10 d postmortem than did corresponding Select muscles. Muscles that had greater aging responses generally had greater 2-d WBSF values. The upper two-thirds Choice psoas major, serratus ventralis, and vastus lateralis muscles required similar aging times to complete a majority of the aging response (< or =0.1 kg of aging response remaining) compared with analogous Select muscles. The upper two-thirds Choice complexus, gluteus medius, semitendinosus, triceps brachii-long head, and vastus medialis muscles required 4 to 6 d less time to complete a majority of the aging response than did comparable Select muscles. Aging times for Select biceps femoris-long head, infraspinatus, longissimus dorsi, rectus femoris, semimembranosus, spinalis dorsi, supraspinatus, and tensor fasciae latae muscles were > or =7 d longer than those for corresponding upper two-thirds Choice muscles. Results from this study suggest that muscle-to-muscle tenderness differences depend on quality grade and aging time and that postmortem aging should be managed with respect to individual muscle and USDA quality grade.     

Mapping intramuscular tenderness variation in four major muscles of the beef round

The objective of this study was to quantify intramuscular tenderness variation within four muscles from the beef round: biceps femoris (BF), semitendinosus (ST), semimembranosus (SM), and adductor (AD). At 48 h postmortem, the BF, ST, SM, and AD were dissected from either the left or right side of ten carcasses, vacuum packaged, and aged for an additional 8 d. Each muscle was then frozen and cut into 2.54-cm-thick steaks perpendicular to the long axis of the muscle. Steaks were broiled on electric broilers to an internal temperature of 71 degrees C. Location-specific cores were obtained from each cooked steak, and Warner-Bratzler shear force was evaluated. Definable intramuscular shear force variation (SD = 0.56 kg) was almost twice as large as between-animal shear force variation (SD = 0.29 kg) and 2.8 times as large as between-muscle variation (SD = 0.20 kg). The ranking of muscles from greatest to least definable intramuscular shear force variation was BF, SM, ST, and AD (SD = 1.09, 0.72, 0.29, and 0.15 kg, respectively). The BF had its lowest shear force values at the origin (sirloin end), intermediate shear force values at the insertion, and its highest shear force values in a middle region 7 to 10 cm posterior to the sirloin-round break point (P < 0.05). The BF had lower shear force values toward the ST side than toward the vastus lateralis side (P < 0.05). The ST had its lowest shear force values in a 10-cm region in the middle, and its highest shear force values toward each end (P < 0.05). The SM had its lowest shear force values in the first 10-cm from the ischial end (origin), and its highest shear force values in a 13-cm region at the insertion end (P < 0.05). Generally, shear force was lower toward the superficial (medial) side than toward the deep side of the SM (P < 0.05). There were no intramuscular differences in shear force values within the AD (P > 0.05). These data indicate that definable intramuscular tenderness variation is substantial and could be used to develop alternative fabrication and(or) merchandising methods for beef round muscles.     

Variation in palatability and biochemical traits within and among eleven beef muscles

The objective of this study was to determine the extent of variation in, and relationships among, biochemical and palatability traits within and among 11 major beef muscles. Longissimus thoracis et lumborum (LD), psoas major (PM), gluteus medius (GM), semimembranosus (SM), adductor (AD), biceps femoris (BF), semitendinosus (ST), rectus femoris (RF), triceps brachii (TB), infraspinatus (IS), and supraspinatus (SS) from one side of 31 Charolais x MARC III steer carcasses were vacuum-packaged, stored at 2 degrees C until 14 d postmortem, and then frozen at -30 degrees C. The 2.54-cm-thick steaks were obtained from two or three locations within muscles in order to assess biochemical traits and Warner-Bratzler shear force, and from near the center for sensory trait evaluation. The PM was most tender and was followed by IS in both shear force and tenderness rating (P < 0.05). The other muscles were not ranked the same by shear force and tenderness rating. The BF had the lowest (P < 0.05) tenderness rating. The PM, GM, and LD had lower (P < 0.05) collagen concentration (2.7 to 4.5 mg/g muscle) than muscles from the chuck and round (5.9 to 9.0 mg/g), except for the AD (4.9 mg/g). Desmin proteolysis was highest (P < 0.05) for BF and LD (60.7 and 60.1% degraded), and was lowest (P < 0.05) for PM (20.2%). The PM, TB, IS, RF, and ST had relatively long sarcomere lengths (> 2.1 microm), whereas the GM had the shortest (P < 0.05) sarcomere length (1.7 microm). Cooking loss was lowest (P < 0.05) for BF (18.7%) and was followed by LD and IS (20.7%); it was highest (P < 0.05) for ST (27.4%). Across all muscles, tenderness rating was highly correlated (r > 0.60) with shear force, connective tissue rating, sarcomere length, and collagen content. Within a muscle, correlations among all traits were generally highest in LD and lowest in AD. Within muscle, location effects were detected (P < 0.05) for shear force (PM, ST, BF, SM, and RF), sarcomere length (PM, ST, BF, LD, SS, IS, SM, and RF), collagen concentration (PM, BF, SS, IS, SM. AD, TB, and RF), desmin degradation (PM, GM, BF, SM, AD, and, RF), and cooking loss (all muscles except SS and AD). There is a large amount of variation within and among muscles for tenderness traits and tenderness-related biochemical traits. These results increase our understanding of the sources of variation in tenderness in different muscles and provide a basis for the development of muscle-specific strategies for improving the quality and value of muscles.     

Determining the optimum beef longissimus muscle size for retail consumers

Research was conducted in two phases to determine the optimum beef LM size for retail consumers. In Phase I, 50 USDA Choice beef carcass sides were selected at a commercial packing plant and assigned to five different categories (10 sides per category) based on LM size: 61 to 68 cm2 (A), 70 to 78 cm2 (B), 80 to 90 cm2 (C), 92 to 103 cm2 (D), and 105 to 119 cm2 (E). Ribeye rolls were retrieved from all carcass sides. Steaks (2.5-cm thick; 14 per ribeye roll) were cut as needed and transported in groups of 35 steaks (seven per LM size category) to a retail grocery store in Brookings, SD, where they were placed into a designated section of the retail meat case. Steaks were tallied every 4 h on weekdays and every 2 h on weekends and holidays to determine the number of monitoring periods that each steak remained in the retail case. Steaks that did not sell within an allotted time were removed from the case and termed "pulled." Time in case and percentage of steaks pulled from the case did not differ among LM size categories (P > 0.16). Quadratic regression indicated that larger LM steaks sold faster (P < 0.05) than average and small LM steaks. Steaks from rib locations 6 and 7 spent more (P < 0.05) time in the case than steaks from rib locations 8 through 12. Steaks from the 7th rib location were more (P < 0.05) likely to be pulled than steaks from the 8th through 12th rib locations. In Phase II, 15 USDA Choice ribeye rolls were selected from a commercial packing plant to represent two LM size categories: 80 to 90 cm2 (AVG; n = 5); and 105 to 119 cm2 (LARGE; n = 10) and cut into 2.5-cm-thick steaks. A portion of the LARGE steaks was subsequently cut in half (HALF). Four display steaks represented each treatment group in each of five random nth price auctions. Seventy-five people were recruited from the Brookings, SD area to participate in the auctions to determine their willingness to pay for the three different types of ribeye steak. Consumers were willing to pay a premium of 1.50 dollars/kg for LARGE ribeye steaks over AVG ribeye steaks (P < 0.05). Consumers discounted HALF ribeye steaks by 1.01 dollars/kg compared with AVG ribeye steaks (P < 0.05). In conclusion, no optimum LM size existed for beef retail consumers; however, a trend existed toward greater demand for larger LM sizes over smaller LM sizes.     

Online prediction of beef tenderness using a computer vision system equipped with a BeefCam module

Four experiments were conducted in two commercial packing plants to evaluate the effectiveness of a commercial online video image analysis (VIA) system (the Computer Vision System equipped with a BeefCam module [CVS BeefCam]) to predict tenderness of beef steaks using online measurements obtained at chain speeds. Longissimus muscle (LM) samples from the rib (Exp. 1, 2, and 4) or strip loin (Exp. 3) were obtained from each carcass and Warner-Bratzler shear force (WBSF) was measured after 14 d of aging. The CVS BeefCam output variable for LM area, adjusted for carcass weight (cm2/kg), was correlated (P < 0.05) with WBSF values in all experiments. The CVS BeefCam lean color measurements, a* and b*, were effective (P < 0.05) in all experiments for segregating carcasses into groups that produced LM steaks differing in WBSF values. Fat color measurements by CVS BeefCam were usually ineffective for segregating carcasses into groups differing in WBSF values; however, in Exp. 4, fat b* identified a group of carcasses that produced tough LM steaks. Quality grade factors accounted for 3, 18, 21, and 0% of the variation in WBSF among steaks in Exp. 1 (n = 399), 2 (n = 195), 3 (n = 304), and 4 (n = 184), respectively, whereas CVS BeefCam output variables accounted for 17, 30, 19, and 6% of the variation in WBSF among steaks in Exp. 1, 2, 3, and 4, respectively. A multiple linear regression equation developed with data from Exp. 2 accurately classified carcasses in Exp. 1 and 4 and thereby may be useful for decreasing the likelihood that a consumer would encounter a tough (WBSF > 4.5 kg) LM steak in a group classified as "tender" by CVS BeefCam compared with an unsorted population. Online measurements of beef carcasses by use of CVS BeefCam were useful for predicting the tenderness of beef LM steaks, and sorting carcasses using these measurements could aid in producing groups of beef carcasses with more uniform LM steak tenderness.     

Mechanical measures of uncooked beef longissimus muscle can predict sensory panel tenderness and Warner-Bratzler shear force of cooked steaks

Two experiments were conducted to investigate mechanical measures of tenderness on uncooked USDA Select longissimus muscle as a means to predict Warner-Bratzler shear force (WBSF) and trained sensory panel tenderness (SPT) of cooked steaks. In Exp. 1, strip loins (n = 24) were aged 14 d postmortem and fabricated into steaks (2.54 cm). Medial, center, and lateral locations within uncooked steaks were evaluated by a plumb bob device and correlated with WBSF and SPT of cooked steaks. In Exp. 2, 24 strip loins were used to evaluate how well plumb bob and needle probe devices used on uncooked steaks predicted WBSF and SPT of cooked steaks. At 2 d postmortem, two steaks were fabricated from the anterior end. One uncooked steak (2.54 cm) was assigned to the plumb bob treatment and the other uncooked steak (5.08 cm) was assigned to needle probe treatment. At 14 d postmortem, one uncooked steak (5.08 cm) was assigned to needle probe treatment, a second uncooked steak (2.54 cm) was assigned to plumb bob treatment, whereas the remaining steaks (2.54 cm) were cooked and evaluated by a trained sensory panel and WBSF device. In Exp. 1, average plumb bob values were negatively correlated (P < 0.05) to average SPT scores (r = -0.48). However, correlations between WBSF and plumb bob values for medial, lateral, and average of all sections were not significant (P > 0.05). In Exp. 2, regression models to predict SPT from needle probe and plumb bob measurements individually taken at 2 d postmortem had R2 of 0.54 and 0.51, respectively. Combining needle probe and plumb bob measurements resulted in an R2 of 0.76; when quadratic terms for both variables were in the model, the R2 was 0.80. Regressing needle probe and plumb bob measurements at 2 d postmortem with WBSF produced R2 values of 0.51 and 0.45, respectively. If linear terms of both probes were combined to predict WBSF, the R2 increased to 0.77. An equation to predict WBSF, including both the linear and quadratic terms of needle probe and plumb bob measurements, resulted in an R2 of 0.84. Using plumb bob and needle probe devices on uncooked longissimus muscle at 2 d postmortem can predict cooked WBSF and SPT of USDA Select Grade steaks at 14 d postmortem.     

Effects of packaging atmospheres on beef instrumental tenderness, fresh color stability, and internal cooked color

Fresh meat color is a major factor influencing the purchase of meat products by consumers, whereas tenderness is the primary trait determining overall eating satisfaction of consumers. The objectives of this research were to determine the effects of packaging atmosphere on fresh beef color stability, cooked color, and tenderness. Longissimus lumborum muscles (n = 14 pairs) from USDA Select, A-maturity carcasses were assigned to either 14-d tenderness measurement or to display and then to 18-d [80% O(2), 20% CO(2) (HiO(2)) modified atmosphere packaging (MAP)] or 28-d [vacuum package (VP) and ultra low (ULO(2)) plus CO MAP blends] tenderness measurement. Loins were then fabricated on d 7 postmortem into 2.54-cm-thick steaks. Steaks 8 to 10 caudal to the first 7 steaks were bisected, assigned to a packaging treatment, and used for internal cooked color. One full steak was used for initial tenderness. Packaging treatments were as follows: vacuum-packaging (VP); 80% O(2), 20% CO(2) (HiO(2)); 0.4% CO, 35% CO(2), 64.6%N(2) (ULO(2)CO); 0.4% CO, 99.6% CO(2) (ULO(2)COCO(2)); 0.4% CO, 99.6% N(2) (ULO(2)CON(2)); or 0.4% CO, 99.6% Ar (ULO(2)COAr). Steaks packaged in HiO(2) MAP were in dark storage (2 degrees C) for 4 d, and all other steaks were in dark storage for 14 d. Steaks were displayed under fluorescent lighting (2,153 lx; 3,000 K) for 7 d, with instrumental color measured on d 0 and 7 of display. Trained color panelists (n = 10) assigned color scores. Steaks for Warner-Bratzler shear force and cooked color were cooked to 70 degrees C. Steaks packaged in the 4 ULO(2) MAP blends with CO had no change (P > 0.05) or increased (P < 0.05) a* values for fresh color. Steaks packaged in VP or the 4 ULO(2) MAP blends with CO had little or no surface discoloration. Steaks packaged in HiO(2) MAP discolored faster (P < 0.05) and 56% more (P < 0.05) than those in any other packaging treatment. There were no differences (P > 0.05) in Warner-Bratzler shear force on d 14 postmortem. Steaks packaged in HiO(2) MAP were less tender (P < 0.05) than the other treatments at the end of display but had 10 d less aging due to a shorter dark storage period. Steaks packaged in HiO(2) had the lowest (P < 0.05) a* values for internal cooked color of all packaging treatments. Steaks packaged in ULO(2)COCO(2) and VP had intermediate a* values, whereas those packaged in ULO(2)COAr, ULO(2)CO, and ULO(2)CON(2) had the greatest (P < 0.05) a* values for internal cooked color. Ultra-low oxygen packaging treatments had longer fresh color stability than steaks packaged in HiO(2) MAP and equal or better tenderness. Packaging atmospheres altered the internal cooked color, with steaks packaged in HiO(2) MAP exhibiting premature browning.     

Influence of quality classification, aging period, blade tenderization, and endpoint cooking temperature on cooking characteristics and tenderness of beef gluteus medius steaks

Top sirloin butts (n = 162) were used to investigate the influence of quality classification, aging period, blade tenderization passes, and endpoint cooking temperature on the tenderness of gluteus medius steaks. Top sirloin butts (gluteus medius) from Select (SEL), Choice (CHO), and Certified Angus Beef (CAB) carcasses were obtained, aged for 7, 14, or 21 d, and either not tenderized or blade tenderized one or two times. Three steaks from each top sirloin butt were randomly selected and assigned to a final endpoint cooking temperature of 65.5, 71.0, or 76.6 degrees C. Cooking characteristics and Warner-Bratzler shear force (WBSF) were analyzed as a split-plot with a 3 x 3 x 3 factorial treatment structure of quality classification, aging period, and tenderization passes in the whole plot and endpoint cooking temperature in the subplot. Sensory panel data for CHO steaks cooked to 70 degrees C were analyzed with a 3 x 3 factorial treatment structure of aging period and tenderization passes. Thawing loss was greater (P < 0.05) for steaks aged 7 d than those aged 21 d. Cooking loss was greater (P < 0.05) for steaks aged for 14 and 21 d than those aged 7 d, and increased (P < 0.05) with each increasing endpoint temperature. Each increase in aging period resulted in lower (P < 0.05) WBSF values. In addition, steaks blade tenderized two times had lower (P < 0.05) WBSF values than steaks blade tenderized once or not at all. Within each quality classification, WBSF values increased (P < 0.05) as endpoint cooking temperature increased. When cooked to 71 or 76.6 degrees C, CHO and CAB steaks had lower (P < 0.05) WBSF than SEL steaks. Steaks blade tenderized one or two times received higher (P < 0.05) sensory panel ratings for myofibrillar and overall tenderness than steaks not blade tenderized. Connective tissue amount and overall tenderness ratings were higher (P < 0.05) for steaks aged 21 vs. 7 d. Postmortem aging and blade tenderization of gluteus medius steaks can improve tenderness, as measured by WBSF and sensory panel, without decreasing flavor or juiciness. When cooking to higher endpoint temperatures, higher quality classifications should be selected to minimize toughness due to cooking.     

Identification of optimal ranges in ribeye area for portion cutting of beef steaks

Restaurant-ready (21-d aged, needle tenderized) loin steaks (strip, S; and T-bone, TB) representing three portion sizes (227, 284, and 340 g for S; 397, 454, and 510 g for TB) were portioned from 71 low-Choice beef carcasses representing seven ribeye size groups (70.9 cm2 and less to 103.2 cm2 and greater, in 6.3-cm2 increments). Steaks (n = 568) were cooked on a grooved grill to temperatures of either 67 or 77 degrees C and evaluated for cooking characteristics, sensory attributes (n = 284), and shear force (n = 284) to identify optimal ribeye areas for portioned steaks. As expected, thickness of all portioned steaks decreased (P < .05) as ribeye size increased, whereas thickness of steaks increased (P < .05) as portion size increased. The S were significantly thicker than TB. The TB cooked faster (P < .05) than did S for ribeye areas 77.4 to 83.8 cm2 in the average portion sizes and for ribeye areas 71.0 to 96.6 cm2 in the large portion sizes. However, S cooked significantly faster than did TB for ribeye areas less than 70.9 cm2 in the average portion sizes. The S had higher (P < .05) initial tenderness scores and lower (P < .05) shear values than did TB. Initial tenderness scores were lower (P < .05) for ribeye areas greater than 103.2 cm2 compared with ribeye areas less than 83.8 cm2 and 90.3 to 96.6 cm2, with all others being intermediate. Shear force tended (P = .08) to follow the initial tenderness results. The S cooked to both end point temperatures, and TB cooked to 67 degrees C had higher (P < .05) initial tenderness scores than did TB cooked to 77 degrees C. Tenderness was reduced in TB cooked to higher temperatures as well as in S and TB portioned from ribeye areas greater than 103.2 cm2. Steaks portioned from carcasses with ribeye areas between 77.4 to 96.6 cm2 can optimize both cooking time and tenderness for the foodservice sector.     

Evaluation of slice shear force as an objective method of assessing beef longissimus tenderness.

Experiments were conducted to develop an optimal protocol for measurement of slice shear force (SSF) and to evaluate SSF as an objective method of assessing beef longissimus tenderness. Whereas six cylindrical, 1.27-cm-diameter cores are typically removed from each steak for Warner-Bratzler shear force (WBSF) determination, a single 1-cm-thick, 5-cm-long slice is removed from the lateral end of each longissimus steak for SSF. For either technique, samples are removed parallel to the muscle fiber orientation and sheared across the fibers. Whereas WBSF uses a V-shaped blade, SSF uses a flat blade with the same thickness (1.016 mm) and degree of bevel (half-round) on the shearing edge. In Exp. 1, longissimus steaks were acquired from 60 beef carcasses to determine the effects of belt grill cooking rate (very rapid vs. rapid) and conditions of SSF measurement (hot vs cold) on the relationship of SSF with trained sensory panel (TSP) tenderness rating. Slice shear force was more strongly correlated with TSP tenderness rating when SSF measurement was conducted immediately after cooking (r = -.74 to -.76) than when steaks were chilled (24 h, 4 degrees C) before SSF measurement (r = -.57 to -.72). When SSF measurement was conducted immediately after cooking, the relationship of SSF with TSP tenderness rating did not differ among the belt grill cooking protocols used to cook the SSF steak. In Exp. 2, longissimus steaks were acquired from 479 beef carcasses to compare the ability of SSF and WBSF of 1.27-cm-diameter cores to predict TSP tenderness ratings. Slice shear force was more strongly correlated with sensory panel tenderness rating than was WBSF (r = -.82 vs -.77). In Exp. 3, longissimus steaks were acquired from 110 beef carcasses to evaluate the repeatability (.91) of SSF over a broad range of tenderness. Slice shear force is a more rapid, more accurate, and technically less difficult technique than WBSF. Use of the SSF technique could facilitate the collection of more accurate data and should allow the detection of treatment differences with reduced numbers of observations and reduced time requirements, thereby reducing research costs.     

National Beef Tenderness Survey-1998

Fifty-six retail stores representing 15 retail chains and 14 foodservice facilities in eight U.S. cities were sampled to determine the tenderness of beef steaks at retail and foodservice levels based on Warner-Bratzler shear (WBS) values and consumer evaluation panels. Retail consumer panels were conducted at five universities. Each retail and foodservice steak was evaluated using 10-point scales. Steaks were divided into the following quality groups for statistical analysis: Prime, Top Choice, Choice, Select, and Lean or No Roll. Quality group had no effect on WBS values of retail clod, chuck roll, top round, bottom round, eye of round, top loin, top sirloin, or ribeye steaks but did (P < .05) affect values for the T-bone/porterhouse. The percentages of retail top round, eye of round, and bottom round steaks with a WBS force > 3.9 kg were 39.6, 55.9, and 68.0, respectively. Foodservice ribeye, top loin, and top sirloin steaks had WBS values less than 3.4 kg for all quality groups, with Prime ribeye steaks having lower (P < .05) WBS values than ribeyes from the other quality groups. With the exception of the retail ribeye steak, quality group did not affect consumer sensory ratings of retail and foodservice steaks. Average postfabrication aging times were 32 d for foodservice subprimals and 19 d for retail cut subprimals. These data indicate that improvements in the tenderness of retail cuts from the round are needed. Finally, quality group had little or no effect on consumer sensory evaluations and WBS values of retail and foodservice steaks used in this study.