Determination of para-aramid single fabric shear by yarn pull-out and analysis by statistical model

The aim of this study was to determine the para-aramid fabric shear by the pull-out method. The fabric sample dimensions and the number of pull-out ends were identified as important parameters. Fabric shear depended on fabric density. Fabric shear strength increased when the number of pulled ends increased. When the fabric length increased, fabric shear strength generally increased. The number of pulled ends and the fabric sample dimensions influenced the fabric shear rigidity. Shear jamming angles were found based on the number of pulled ends. The results showed that para-aramid fabric shear could be measured by yarn pull-out test.     

Pull-out properties of polyester woven fabrics: Effects of softening agent and interlacement on single and multiple yarn pull-out forces and analysis by statistical model

The aim of this study was to understand the effects of softening treatment on pull-out properties of plain, ribs and satin fabrics. Polyester woven fabrics were used to conduct the pull-out tests. Data generated from these tests included pullout force, crimp extension and fabric displacement. A developed yarn pull-out fixture was used to perform single and multiple pull-out tests on treated and untreated polyester fabrics. Yarn pull-out forces depend on fabric treatments, fabric density, fabric weave, and the number of pulled ends in the fabric. The results of regression model showed that multiple and single yarn pull-out forces of treated fabrics were lower than those of untreated fabrics. The multiple yarn pull-out force was higher than that of the single yarn pull-out force, and that dense fabric had a high pull-out force. Treated and untreated plain fabrics had high single and multiple pull-out forces compared to those of treated and untreated ribs and satin fabrics. Yarn crimp extension depends on directional crimp ratios in the fabric and the number of pulled yarn ends. High directional crimp ratio fabric showed high directional yarn crimp extension. Fabric displacement depends on the number of pulled yarn ends and also fabric treatments. Fabric displacement in multiple pull-out tests showed high fabric displacement compared to that of single pull-out tests. On the other hand, the regression model could be used in this study as a viable and reliable tool.     

Characterizations of stick-slip stage of yarn pull-out in dry and softening treated polyester plain woven fabric

The aim of this study was to understand the stick-slip properties of polyester plain woven fabric. For this reason, pull-out test was conducted on dry and softening treated polyester woven fabrics. It was found that stick-slip force and accumulative retraction force depend on the number of pulled ends in the fabric, fabric sample dimensions and softening treatments. Stick-slip forces of polyester fabric in the multiple yarn pull-out test were higher than those of the single yarn pull-out test. Stick-slip force in single and multiple yarn pull-out tests in the dry polyester plain fabric were generally higher than those of the softening treated polyester plain fabric. On the other hand, the amount of stick-slip force was related to the number of interlacement points in the fabric whereas the amount of accumulative retraction force was related to fabric structural response.     

Effects of sample dimensions on pull-out properties of woven fabric structures

The aim of this study was to understand the effects of fabric sample dimensions on pull-out properties of fabric weaves. Polyester woven fabrics were used to conduct the pull-out tests. A yarn pull-out fixture was developed and data generated from this research. Yarn pull-out forces depend on sample dimensions, fabric density, fabric weave, and number of pulled ends in the fabric. Results showed that multiple and single yarn pull-out forces of long samples were higher than those of short samples, and the multiple yarn pull-out force was higher than that of the single yarn pull-out force, and dense fabric has high pull-out force. Plain fabric weave showed high single and multiple pull-out forces compared to ribs and satin fabric weaves. The regression model could be used in this study as a viable and reliable tool. This research could be valuable for development of multifunctional fabrics in technical textile applications.     

Properties of stick-slip stage of yarn pull-out in para-aramid woven fabric

The aim of this study was to understand stick-slip properties of para-aramid woven fabrics. For this reason, pullout test was conducted on para-aramid Kevlar®29 and Kevlar®129 woven fabrics. The stick-slip and accumulative retraction force regions were defined based on the force-displacement curve. It was found that the stick-slip force and accumulative retraction force depended on fabric density and the number of pulled ends in the fabric. Stick-slip force in the multiple yarn pull-out test was higher than those of the single yarn pull-out test. Stick-slip force in single and multiple yarn pull-out tests in the dense K29 fabric were higher than those of the loose K129 fabric. In addition, long fabric samples showed high stick-slip force compared to that of the short fabric samples. On the other hand, the amount of stick-slip force was related to the number of interlacement points in the fabric whereas the amount of accumulative retraction force was related to fabric structural response.     

Effect of weaving process on tensile characterization of single and multiple ends of air-entangled textured polyester yarns

The tensile properties of air-entangled textured polyester single and multiple yarn ends before and after weaving were analyzed. The effects of weaving process considering fabric unit cell interlacement and number of yarn ends were evaluated by regression model. For this purpose, plain, ribs and satin woven fabrics were produced. The yarns were raveled from fabrics, and the tensile tests were applied to these yarns. The developed regression model showed that the number of interlacement and crimp ratio on the warp and weft yarns influence their tensile strength. Tensile strength of raveled yarns decreased compared to that of the bobbin yarn due to the effect of weaving process. This property degradation on the ravel yarns considered process degradation. Generally, when the number of warp and weft yarn ends increases, the warp and weft yarn tensile strengths for each fabric type decrease, whereas the warp and weft yarn tensile elongations slightly increase. The results from regression model were compared with the measured values. This study confirmed that the method in the study can be a viable and reliable tool. The research finding could be useful those who work on preform fabrication.     

Mechanical properties and hand evaluation of hemp woven fabrics treated with liquid ammonia

The effects of liquid ammonia (L/A) treatment on the mechanical properties and hand of 100 % hemp woven fabrics were investigated by the KES-FB (Kawabata Evaluation System for Fabric). Tensile energy and tensile resilience were increased by the L/A treatment. Bending and shearing values such as bending rigidity, bending moment, shear stiffness, shear hysteresis of the L/A treated fabrics were lower than those of the untreated ones. Compressional linearity and compressional energy were decreased while the compressional resilience was increased by the L/A treatment. From the hand evaluation, the primary hand values as well as total hand value of the hemp fabric were markedly increased by the L/A treatment, especially when yarn number was fine. Therefore, L/A treatment was found to be an effective method of improving the flexibility and softness of hemp woven fabrics.     

Comfort and handle related properties of P/V blended air-jet textured yarn fabrics

The effect of blend percentage on comfort and handle related properties of fabrics made from polyester/viscose blended air-jet textured yarn weft were studied and the results were compared with fabrics made from polyester/viscose ring-spun yarn wefts of similar linear densities. It is observed that with increase in polyester content in the blend, the air permeability and water vapour permeability reduces whereas thermal resistance, transverse wicking and shear rigidity increases both in ring-spun yarn and textured yarn fabrics and bending rigidity increases in textured yarn fabrics. Textured yarn fabrics exhibit lower air permeability and extensibility, higher thermal resistance, relative water vapour permeability, transverse wicking values and bending rigidity as compared to the ring-spun yarn fabrics.     

The effect of fabric balance and fabric cover on surface roughness of polyester fabrics

The effects of fabric balance and fabric cover on surface roughness values of textured polyester woven fabrics with different constructional parameters were investigated. The warp yarn properties (type, count and warp density) were kept constant while the effect of variation in weft yarn density and weave pattern were studied. Measurements were conducted on pre-treated white fabric samples and the results assessed in relation to their constructional properties. A general overview of the results showed that surface roughness values of polyester fabrics affected by fabric balance and fabric cover and the effects were related to fabric thickness, yarn densities, yarn crimp, positioning of yarns in fabric structure. A change in weave pattern from sateen to plain increased the fabric balance and fabric cover, but decreased the surface roughness. Similarly, an increase in weft density increased the fabric balance and fabric cover, but decreased surface roughness. In order to produce fabrics with smooth surface properties yarn density should be increased, yarn float lengths decreased, cover of fabrics increased and fabric balance improved.     

Deformation analysis of composite reinforcing fabrics through yarn pull-out, drape and shear tests

This study reveals a new method based on image processing of bias extension test results to determine shear angle that characterizes the shear properties of fabric reinforcements. This way the simple and exact determination of shear angle with conventional devices is solved. The new method was tested on fabric reinforcements made of carbon, aramid and glass fibers and the results were compared with that of two known versions of bias extension tests. The analysis of the relation between shear angle and other deformation properties that characterize spatial deformation behavior involved the comparison of shear test results with yarn pull-out and drape tests carried out with special methods.     

Electromagnetic interference shielding effectiveness of SS/PET hybrid yarn incorporated woven fabrics

A detailed study of electromagnetic shielding effectiveness (EMSE) of woven fabrics made of polyester and stainless steel/polyester blended conductive yarn was presented in this research work. Fabrics with different structures were analyzed and their shielding behavior was reported under different frequencies. Shielding efficiency of fabric was analyzed by vector network analyzer in the frequency range of 300 kHz to 1.5 GHz using coaxial transmission line holder. The effects of different fabric parameters such as weft density, proportion of conductive weft yarn, proportion of stainless steel content, grid openness, weave pattern and number of fabric layers on EMSE of fabrics were studied. The EMSE of fabric was found to be increased with increase in proportion of conductive yarn in the weft way. With increase in overall stainless-steel content in the fabric, the EMSE of fabric was increased. As such weave is considered, it did not have significant effect on EMSE of fabrics. But fabric with lower openness and aperture ratio showed better conducting network, hence better shielding. With increase in number of layers of fabric and ply yarns, EMSE of fabric was increased.     

Evaluation of the structural properties of plain fabrics woven from various fibers using Peirce’s model

Peirce’s fabric model has been widely used to predict the structural behavior of various plain woven fabrics. The structure of plain woven fabric can be defined in terms of the warp yarn number, weft yarn number, warp fabric density, weft fabric density, warp crimp, and weft crimp. The warp and weft yarn diameters are calculated from the warp and weft yarn numbers, and the effective coefficient of the yarn diameter is defined by using this model. We have investigated structural properties, such as the effective coefficient of the yarn diameter, yarn crimp, and fabric thickness for two different fabrics in which the constituent yarns are assumed to be either incompressible or compressible. This model is also applied to various plain fabrics woven from cotton, rayon, wool, linen, nylon, acetate, polyester, and silk yarns.     

A comparative study on performance properties of yarns and knitted fabrics made of biodegradable and conventional fibers

Biodegradable products are parts of a natural cycle. The biopolymers and the fibers that can be produced from them are very attractive on the market because of the positive human perception. Therefore, PLA being a well known biodegradable fiber and some conventional fibers were selected for the current study to examine the differences between them and to emphasize the importance of biodegradability beside fabric performance. 14.8 tex (Ne 40/1) combed ring spun yarns produced from biodegradable fiber PLA, new generation regenerated fibers Modal and Tencel, synthetic and blends 50/ 50 % cotton/polyester and 50/50 % viscose/polyester, polyester were selected as yarn types and by using these yarns, six knitted fabrics were produced and some important yarn and fabric properties were compared. In this context, moisture and the tensile behavior of yarns and pilling, bursting strength, air permeability and moisture management properties of the test fabrics are discussed.     

Assessing the relationship among fabric constructional parameters, fractional reflectances and cover factors of polyester fabrics by experimental and mathematical methods

This paper focuses on the assessment of the relation among constructional properties, fractional reflectances and cover factors of fabrics woven from polyester yarns. A novel equation for the calculation of the relation between fractional reflectance and fabric cover factor was proposed and the usage of the equation was assessed by reflectance measurements. 48 polyester fabrics having different constructional parameters were used and the fabrics differed from each other by their cover factors. The warp yarn type and count, warp density and warp yarn twist were the same but weft yarn count, weft yarn fiber count and weft density were different for the fabrics in the experimental sub-groups. The reflectance measurements were conducted on the pretreated but undyed fabric samples as well as on the individual yarn systems of the same fabrics. Fabrics with the same cover factors exhibited different fractional reflectances. Reflectances were found to be dependent on the cover factor as well as on yarn fiber fineness, yarn count, yarn density and fabric weave. The changes in crimp of the yarns according to different construction parameters also governed the changes in fractional reflectances of fabric surfaces. The proposed equation was tested according to different fabric construction parameters and it was concluded that fiber fineness and weave pattern were among the most important parameters which govern the total light reflectances from the fabric surfaces, although they are not incorporated in the calculation of the fabric cover factors. The proposed equation was used to explain the effects of these components on the reflectance behavior of the fabric surfaces and on fabric cover.     

Analysis and off-axis tensile characterization of air-entangled textured polyester woven fabrics depending on unit cell interlacing frequency

The aim of this study is to analyze and determine the off-axis tensile properties of air-entangled textured polyester fabrics based on unit cell interlacing frequency. For this purpose, continuous filament polyester air-entangled textured yarn was used to produce plain, ribs and satin woven fabrics. The fabrics were cut from the warp direction (0°) to weft direction (90°) at every 15° increment, and tensile tests were applied to those of the off-axis samples. The strength and elongation results were introduced to the statistical model developed, and regression analyses were carried out. Hence, the effects of off-axis loading and interlacement on the directional tensile properties of the fabric were investigated. The regression model showed that off-axis loading influences fabric tensile strength. On the other hand, interlacement frequency is the most important factor for fabric tensile elongation. The results from the regression model were compared with the measured values. This study confirmed that the method used in this study as can be a viable and reliable tool. Future research will concentrate on multiaxially directional fabric and the probability that it will result in homogeneous in-plane fabric properties.     

Empirical modelling of tensile strength of woven fabrics

Aesthetic properties of fabrics have been considered as the most important fabric attribute for years. However, recently there has been a paradigm shift in the domain of textile material applications and consequently more emphasis is now being given on the mechanical and functional properties of fabrics rather than its aesthetic appeal. Moreover, in certain woven fabrics used for technical applications, strength is a decisive quality parameter. In this work, tensile strength of plain woven fabrics has been predicted by using two empirical modelling methods namely artificial neural network (ANN) and linear regression. Warp yarn strength, warp yarn elongation, ends per inch (EPI), picks per inch (PPI) and weft count (Ne) were used as input parameters. Both the models were able to predict the fabric strength with reasonably good precision although ANN model demonstrated higher prediction accuracy and generalization ability than the regression model. The warp yarn strength and EPI were found to be the two most significant factors influencing fabric strength in warp direction.     

Transglutaminase treatment for improving wool fabric properties

The microbial transglutaminase (mTGase) is used as a bio-catalyst to repair the wool damages caused by chemical or enzymatic treatments. In this paper, the effect of mTGase on the degree of yarn strength, area shrinkage, wettability, and the dyeing properties of wool was investigated. Through mTGase treatment, the yarn strength was improved about 22.2 %. The knitted wool fabrics treated with mTGase after pretreatment of H₂O₂ and protease displayed 7.5 % of area shrinkage and about 22.3 % recovery in tensile strength when compared with those treated without mTGase. Also, mTGase treatment could improve the wettability and dyeing properties of wool fabrics. With the increase of mTGase concentration, the initial dye exhaustion increased significantly and the time to reach the dyeing equilibrium was shortened. It was evident that the improvement of dyeing properties was closely related to the improvement of wettability performance of wool fabric by using transglutaminase.     

Enhancement of the mechanical properties of glass/polyester composites via matrix modification glass/polyester composite siloxane matrix modification

Enhancement of the mechanical and vibrational properties of glass/polyester composites was aimed via matrix modification technique. To achieve this, unsaturated polyester was modified by incorporation of oligomeric siloxane in the concentration range of 1–3 wt%. Modified matrix composites reinforced with woven roving glass fabric were compared with untreated glass/polyester in terms of mechanical and interlaminar properties by conducting tensile, flexure, and short-beam shear tests. It was found that after incorporation of 3 % oligomeric siloxane into the polyester matrix, the tensile, flexural, and interlaminar shear strength (ILSS) values of the resulting composite increased by 16, 15, and 75 %, respectively. The increases in ILSS as well as in tensile and flexural properties were considered to be an indication of better fiber/matrix interaction as confirmed by SEM fractography images. Furthermore, the effect of oligomeric siloxane incorporation on the vibrational properties of the composites was investigated by experimental modal testing and the natural frequencies of the composites were found to increase with increasing siloxane concentration.     

麻盖涤吸湿快干针织面料性能及整理工艺研究

以纯苎麻纱和细旦涤纶为原料编织麻盖涤双面针织物;用亲水性硅油、水性聚氨酯、纤维素酶等进行吸湿快干、柔软以及消除刺痒感的整理。结果表明:麻盖涤针织面料的吸湿快干性能比棉盖涤好,通过应用合适的整理剂和整理工艺能有效地解决麻盖涤针织物手感和刺痒感问题。本文还对纯苎麻纱针织织造中断纱爆孔问题提出了解决的措施。     

麻盖涤吸湿快干针织面料性能及整理工艺研究

以纯苎麻纱和细旦涤纶为原料编织麻盖涤双面针织物；用亲水性硅油、水性聚氨酯、纤维紊酶等进行吸湿快干、柔软以及消除刺痒感的整理。结果表明：麻盖涤针织面料的吸湿快干性能比棉盖涤好，通过应用合适的整理剂和整理工艺能有效地解决麻盖涤针织物手感和刺痒感问题。本文还对纯苎麻纱针织织造中断纱爆孔问题提出了解决的措施。