Application of silver nanoparticles to cotton fabric as an antibacterial textile finish

A novel nano-silver colloidal solution was prepared in one step by mixing AgNO₃ aqueous solution and an amino-terminated hyperbranched polymer (HBP-NH₂) aqueous solution under vigorous stirring at room temperature. All results of Dynamic Light Scattering (DLS), Transmission Electron Microscopy (TEM) and UV/Visible Absorption Spectrophotometry indicated that silver nanoparticles had been formed in colloidal solution. Cotton fabric was treated with nano-silver colloid by an impregnation method to provide the cotton fabric with antibacterial properties. The whiteness, silver content, antibacterial activity and washing durability of the silver-treated fabrics were determined. The results indicated that the silver-treated cotton fabric showed 99.01 % bacterial reduction of Staphylococcus aureus and 99.26 % bacterial reduction of Escherichia coli while the silver content on cotton was about 88 mg/kg. The antimicrobial activity of the silver-treated cotton fabric was maintained at over 98.77 % reduction level even after being exposed to 20 consecutive home laundering conditions. In addition, the results of scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) confirmed that silver nanoparticles have been fixed and well dispersed on cotton fabrics’ surface and the major state of the silver presented on the surface was Ag⁰.     

Performance of cotton fabric treated with an amino-terminated hyperbranched polymer

An amino-terminated hyperbranched polymer (HBP-NH₂), synthesized from methyl acrylate and diethylene tri-amine by polycondensation, was applied to treat cotton samples by a pad-dry-cure method. Physical properties, salt-free dye-ability, antimicrobial activity, and antiultraviolet property of the treated cotton samples were tested. The crystallinity and mechanical properties, including breaking strength, breaking elongation, and Young’s modulus of the treated cotton fibers, increased slightly in comparison with those of the untreated cotton fibers. The thermal stability and the moisture regain were also improved slightly. Dyed with direct dyes and reactive dyes in the absence of the electrolytes, the treated cotton fabric showed similar or higher color strength compared with the untreated cotton fabric in conventional dyeing. The treated cotton fabric can also be dyed with acid dyes effectively. In addition, the treated cotton fabric showed good antimicrobial activities against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The study of the antiultraviolet properties of the treated cotton fabric indicated that the HBP-NH₂ contributed to the reduction of UV transmission and the increase of UPF.     

Synthesis of ZnO nanoparticles by PNP and its application on the functional finishing of cotton fabrics

This paper presents a facile and novel approach for the synthesis of ZnO nanoparticles in aqueous solution based on a one-step reaction between a modified hyperbranched polymer (PNP) and zinc nitrate. The prepared ZnO nanoparticles polymeric hybrid was characterized and its antibacterial activity was investigated. The results indicated that the ZnO nanoparticles have an average size about 6 nm and well dispersed in aqueous medium. The minimum inhibitory concentration (MIC) of them was 20 ppm and 60 ppm against S. aureus and E. coli, respectively. For the functional finishing of cotton fabrics by these ZnO nanoparticles, a microwave assisted in situ fabrication method was employed. Scanning electron microscope (SEM), energy dispersive X-ray (EDX) spectroscopy and X-ray diffraction (XRD) measurements confirmed that the ZnO nanoparticles in situ generated in cotton fabrics successfully. Fourier transform infrared (FT-IR) spectroscopic investigation demonstrated that the ZnO nanoparticles were fixed on the cotton fibers by PNP. The treated cotton fabrics exhibited excellent UV protective properties and antibacterial activities. When ZnO content of cotton fabric was 1.49 %, the UPF value of treated cotton fabric exceeded 125 and the bacterial reduction rate against S. aureus and E. coli reached 99.97 % and 98.40 %, respectively.     

Dyeing properties and antimicrobial activity of silk fabric with extract of unripe Citrus Unshiu fruits

This study was carried out to optimize dyeing conditions of unripe Citrus Unshiu extract on silk fabric and to evaluate antimicrobial activity of the dyed fabric for its potential use as a functional natural dye. Unripe fruits of Citrus Unshiu in Jeju Island, Korea, extracted in 80 % Ethanol solution to final solid dye powder were dyed on silk fabric under a variety of conditions such as dye bath concentrations, temperature, and dyeing duration together with mordanting. Dyeing fastness properties to washing, rubbing, perspiration, and light were tested and the antimicrobial activities of the dyed fabric against Staphylococcus aureus and Klebsiella pneumoniae were investigated quantitatively. As results, the fabric showed the maximum dye uptake (K/S) under the conditions of 80 °C for temperature, 30 min for duration, and 600 % (o.w.f.) for dye concentration. Both pre- and post-mordanting seemed not to be effective on increasing K/S values of the dyed silk fabrics under the optimum dyeing conditions. Fastness ratings to washing, rubbing, and perspiration were all very good (4–5 grades) for both 300 and 600 % dyed silk fabrics. Excellent antimicrobial activities over 99 % reduction rate against two both bacteria were exhibited for all of dyed fabrics undergone more than 300 % of dye concentration. From these results, it was concluded that the dye concentration of 300 % of unripe Citrus Unshiu could be employed to produce antimicrobial silk fabric. Furthermore, to get more saturated shades on the fabric by the citrus, higher dye concentration such as 600 % was available as well.     

Effect of Silver Particle size on color and Antibacterial properties of silk and cotton Fabrics

In this study silver nanoparticles with different particle sizes and hence colors were synthesized on silk and cotton fabrics through reduction of silver nitrate. Particle sizes of the silver colloids were measured by dynamic light scattering (DLS). The structure and properties of the treated fabrics were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and UV-Vis reflectance spectroscopy. Various characteristics of the treated fabrics including antibacterial activities against a Gram positive (Staphylococcus aureus) and a Gram negative (Escherichia coli) bacteria, color effect, wash and light fastness, water absorption, fabric rigidity, and UV blocking properties were also assessed. The results indicated that the treated fabrics displayed different colors in the presence of silver nanoparticles with different particle sizes and exhibited good and durable fastness properties. Also, the size of the silver particles had a tangible effect on antibacterial activity of treated fabrics and its antibacterial performance was improved by decreasing the size of particles. Moreover, this process imparted significantly UV blocking activity to fabric samples.     

Preparation of electroconductive,magnetic, antibacterial,and ultraviolet-blocking cotton fabric using reduced graphene oxide nanosheets and magnetite nanoparticles

The main goal of present study was the fabrication of cotton fabric with special functions, including electrical conductivity, magnetic, antibacterial, and ultraviolet (UV) blocking. In this regard, the cotton fabric was primarily coated with graphene oxide and then reduction of graphene oxide and synthesis of magnetite nanoparticles accomplished in one step. The alkaline hydrolysis of magnetite precursors and reduction of graphene oxide was simultaneously performed using sodium hydroxide to produce reduced graphene oxide/Fe₃O₄ nanocomposite on the fabric surface. The prepared cotton fabrics were characterized with field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). The treated fabrics with reduced graphene oxide/Fe₃O₄ nanocomposite displayed a low electrical resistivity i.e. 80 kΩ/sq. Furthermore, the coated fabrics showed reasonable magnetic properties due to the presence of magnetite nanoparticles on the surface of cotton fabrics. Moreover, this process imparted proper antibacterial properties and UV blocking activity to cotton samples.     

Eco-friendly and Durable Antibacterial Cotton Fabrics Prepared with Polysulfopropylbetaine

A novel antibacterial agent polysulfopropylbetaine (PSPB) bearing carboxyl groups was synthesized and its application on cotton fabric to provide durable antibacterial property was also presented. The successful synthesis of PSPB and its immobilization onto the cotton fabric surface were verified by a series of tests including FTIR, ¹H NMR, XPS and SEM. Viable cell counting method was employed to investigate antibacterial properties of the finished cotton fabrics. It was found that the cotton fabrics treated with PSPB were endowed with desirable antibacterial activity against both gram-negative bacteria Esherichia coli (E.coli, AATCC 6538) and gram-positive bacteria Staphylococcus aureus (S.aureus, AATCC 25922), with the bacterisotatic rates of 99.69 % and 99.95 %, respectively. Notably, the bacterial reduction rates still maintained over 90 % against both bacteria even after 50 consecutive laundering cycles. Moreover, tests concerning the hydrophilicity, air permeability, water vapor transmission, mechanical properties as well as thermal properties were carried out systematically. The experimental results indicated the hydrophilic performance, air permeability and moisture penetrability of the cotton fabrics finished with PSPB were improved greatly in spite of a slight reduction in thermal performance and little obvious influence on mechanical performance. The antibacterial cotton fabric has the potential to be applied in sportswear, underwear, household textiles, medical fields and much more.     

Preparation of Durable Antibacterial Cellulose with AgCl Nanoparticles

In this study, a facile method was developed to coat AgCl nanoparticles (NPs) onto knitted cotton fabrics. The AgCl NPs were characterized by ultraviolet absorption spectrum, X-ray diffraction (XRD) and dynamic laser light scattering (DLS). The AgCl NPs were coated onto cotton fabrics through a pad-dry-cure process with the assistance of 1,2,3,4- butanetetracarboxylic acid (BTCA). Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), ICP-OES analysis and energy-dispersive X-ray spectroscopy (EDX) confirmed that AgCl NPs were successfully coated onto cotton fabrics. The prepared cotton samples exhibited excellent antimicrobial activity against both Gram-positive S. aureus and Gram-negative K. pneumonia bacteria. Rat skin fibroblast cytotoxicity testing demonstrated the treated cotton fabrics to be non-toxic. The washing durability evaluation showed that the antimicrobial function of cotton fabrics was durable to washing. In addition, the wrinkle resistance of the coated cotton fabrics was improved and there was no obvious change in whiteness.     

Development of antimicrobial medical cotton fabrics using synthesized nanoemulsion of reactive cyclodextrin hosted coconut oil inclusion complex

Reactive cyclodextrin (RCD) based nanoemulsion and loaded with coconut oil in presence of Tween 80 emulsifying agent for development of antimicrobial medical cotton fabrics is the subject of current research. RCD based nanoemulsion was prepared at different stirring duration, viz, 2, 4, 6 and 24 h in presence of Tween 80. This was done in order to induce varieties in size and morphology of the nanoemulsion. The coconut oil encapsulated RCD based nanocomposite was precipitated as powder using centrifugation technique for 60 min at 4500 rpm and the resulted powder was investigated using TEM and SEM techniques. The images that provided by these techniques confirmed the nano-sized scale of the coconut oil loaded RCD nanocomposite. In addition, the entrapment efficiency of coconut oil loaded RCD based nanoemulsion after centrifugation was calculated and was found to more than 93 %; this is a proof for the successful inclusion of the coconut oil inside the cavity of RCD molecules. Moreover, the obtained RCD based nanoemulsions were applied to bleached cotton fabrics as per the pad-dry-cure method. The as treated cotton fabrics were monitored for nitrogen content, add-on, mechanical properties and morphology vis-a-vis those similarly treated fabrics but using the as prepared microemulsion of RCD loaded with coconut oil in absence of Tween 80. The morphological structure of cotton fabrics treated with the nanoemulsion in question was also examined using SEM technique. Moreover, the biological activity of the nanoemulsion finished fabrics before and after being submitted to 20 washing cycles was investigated against different types of bacteria and fungi as per the inhibition zone method. Results obtained signify: (i) deposition on the fabric of coconut oil loaded RCD nanoemulsion; (ii) the add-on of the nanoemulsion on the surface of cotton fabric is a manifestation of the stirring duration, proofing the formation of ultrafine oil nanoemulsion which penetrates the fabric surface; (iii) the finished fabrics display antimicrobial activity with clear excellent inhibition zone even after 20 washing cycles, indicating the protection of these fabrics for human beings from harmful microbes. In conclusion, the cotton fabrics treated with nanoemulsion of RCD loaded coconut oil is considered as an effective super antimicrobial medical textile against pathogenic microorganisms of both bacteria and fungus species.     

Flame retardant properties of triazine phosphonates derivative with cotton fabric

The flame retardant behavior of cotton fabric treated with phosphorus-nitrogen containing triazine compound was evaluated. It was found that cyanuric chloride (2,4,6-trichloro-1,3,5-triazine) is an excellent starting material for the preparation of phosphonate flame retardants that interact well with cotton to improve flame resistance (FR) performance. Tetraethyl 6-chloro-1,3,5-triazine-2,4-diyldiphosphonate (TECTDP) has been prepared by a simple one-step reaction in high yield (98.0 %). Cotton fabrics treated with TECTDP result in covalent bond formation between TECTDP and hydroxyl groups in cotton fabrics. This FR system provides an efficient flame retardant for cotton textiles at low cost to meet government mandates. In this study, the FR material was synthesized and characterized by ¹H and ¹³C nuclear magnetic resonance (NMR), and LC-MS spectroscopy. The chemical structure of cotton twill fabric treated with TECTDP by pad-dry-cure method was analyzed by FT-MIR and SEM. Furthermore, the thermal and flammability properties were evaluated by thermogravimetric analysis (TGA), limiting oxygen index (LOI, ASTM D-2863-09), and a vertical flame test (ASTM D-6413-08).     

Antibacterial finishing of cotton fabrics using biologically active natural compounds

The paper discusses a method to functionalize cotton fabrics using biologically active natural compounds to achieve the antibacterial characteristics required for medical application. The biologically active natural compounds include propolis, beeswax, and chitosan. Three 100 % cotton knitted fabrics with different degrees of compactness were impregnated in the emulsions containing the active ingredients and fabric variant G3 with the highest degree of impregnation was considered for the evaluation of the antibacterial properties and comfort characteristics. The results show that the treated cotton fabric had high antibacterial activity against both gram positive bacteria Staphylococcus aureus and Streptococcus β haemolytic, and gram negative bacteria Escherichia coli and Pseudomonas aeruginosa. The presence of the biologically active natural compounds on the cotton substrates modified the surface of the textile fibers as seen in the SEM images. The treatment also improved fabric comfort properties, the cotton substrates became less air permissive and more hygroscopic after the treatment. The experimental results indicated that propolis, beeswax and chitosan can be applied as an emulsion to functionalize cotton textile materials. The antibacterial performance of the functionalized fabrics suggested that the cotton fabrics treated with those biologically active natural compounds have the potentials to be used in medical fields.     

Highly flame retardancy of cotton fabrics with a novel phosphorus/nitrogen/silicon flame-retardant treating system

A novel reactive flame retardant (FR) containing phosphorus, nitrogen, and silicon was synthesized successfully, and its chemical structure was fully characterized by Fourier transform infrared spectrometry and nuclear magnetic resonance spectrometry (¹H-NMR and ³¹P-NMR). Then it was used to impart flame resistance to cotton fabrics. Vertical flammability and limiting oxygen index test were used to evaluate the flame retardancy of the cotton fabrics treated with FR. When the cotton treated with 150 g/l FR and 50 g/l sodium hypophosphite, the finished cotton can pass the vertical flammability test. Thermogravimetry (TG) was used to evaluate thermal behavior of FR and cotton fabrics. TG results demonstrated that the FR has good thermostability and char-forming ability. After treatment with FR, the thermal stability of the cotton fabrics was clearly improved, indicating that the FR can protect cotton fabric from fire to a certain degree. Furthermore, attenuated total reflection Fourier transform infrared spectroscopy was utilized to characterize the chemical structure of FR treated cotton fabrics. Finally, the surface morphology in different regions of the treated cotton was observed using scanning electron microscopy.     

Using artificial neural network to predict colour properties of laser-treated 100% cotton fabric

In this paper, artificial neural network (ANN) model was used for predicting colour properties of 100 % cotton fabrics, including colour yield (in terms of K/S value) and CIE L, a, and b values, under the influence of laser engraving process with various combination of laser processing parameters. Variables examined in the ANN model included fibre composition, fabric density (warp and weft direction), mass of fabric, fabric thickness and linear density of yarn (warp and weft direction). The ANN model was compared with a linear regression model where the ANN model produced superior results in prediction of colour properties of laser engraved 100 % cotton fabrics. The relative importance of the examined factors influencing colour properties was also investigated. The analysis revealed that laser processing parameters played an important role in affecting the colour properties of the treated 100 % cotton fabrics.     

N-halamine-bonded cotton fabric with antimicrobial and easy-care properties

N-halamine precursor 2,2,6,6-tetramethyl piperidinol (TMP), a hindered amine light stabilizer, was bonded onto cotton fabric by using 1,2,3,4-butanetetracarboxylic acid (BTCA) as a crosslinking agent. A variety of treating conditions including TMP concentration, curing temperature and time, and catalyst were studied. The treated fabrics were characterized using FTIR spectra and scanning electron microscope (SEM). The cotton fabric treated with TMP precursor could be rendered biocidal upon exposure to dilute household bleach. The chlorinated cotton swatches showed great efficacy and inactivated 100 % of Staphylococcus aureus with 7.1 log reduction with 5 min of contact and 83.25 % of E. coli O157:H7 at 10 min of contact. In addition, the wrinkle recovery angle of the treated cotton fabrics increased from 229 ° of untreated cotton fabrics to 253 °. This study provided a practical finishing process to produce cotton fabrics with easy care and antibacterial functionalities at the same time.     

Effect of Urea/NaOH aqueous system on morphology and properties of cotton fabric

This paper was focused on comparing the effect of urea/NaOH aqueous system with that of single urea or NaOH treating system on cotton fabric morphology and properties. Optical microscopy (OM), scanning electron micrograph (SEM), Fourier transform infrared spectroscopy (FT-IR), and wide X-ray diffraction (WAXD) were used to study cotton fabric morphology and properties before and after treatment by urea/NaOH, single urea, and single NaOH treating systems. Results showed that the cotton fabric treated by urea/NaOH aqueous system had better dyeability than the samples untreated and treated by single urea or single NaOH treating systems. Obvious differences were observed in appearance and morphology of cotton fabrics before and after treatment by urea/NaOH aqueous system. The composition and the structure of urea/NaOH treated cotton fiber had no distinct changes, only except the reduced hydrogen bonding between cellulosic macromolecules. Tensile strength and elongation at break of cotton fabric showed a slight decrease after treatment by urea/NaOH system. In addition, shrinkage of area and weight reduction of urea/NaOH treated samples were higher than those of the samples untreated and treated by single urea or single NaOH treating system.     

Synthesis,film morphology and performance of novel crosslinked polysiloxane with end-capped epoxy groups on cotton substrates

An epoxy group-terminated polyvinylmethylsiloxane (EPVMS) was firstly prepared via the cohydrolysis/condensation reaction of octamethylcyclotetrasiloxane (D₄), 2,4,6,8-Tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane (D₄V), and epoxy group-terminated polydimethylsiloxane (ETP) under a base catalyst. Then, the EPVMS was reacted with polymethylhydrosiloxane oligomer (PHMS) by hydrosilylation to develop novel crosslinked polysiloxane with end-capped epoxy groups (CLPS). The chemical structure and the thermal property of the as-prepared products were characterized by Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance spectra (¹H/¹³C NMR) and thermogravimetric analysis (TGA). Finally, the CLPS was applied as the finishing agent to treat the cotton fabrics. The film morphology and the surface properties were examined with scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), contact angle measurements, and other instruments. FT-IR and NMR results confirmed the structure of the resultants. The crosslinked polysiloxane CLPS showed better thermal stability than the uncrosslinked polysiloxane EPVMS. The CLPS film on cotton fabric surface seemed to be smooth compared to the control by SEM. However, owing to the crosslinked structure, the CLPS film on silicon-wafer was inhomogeneous and had a few weak or strong peaks. At 5 nm data scale and in 2×2 μm² scanning field, the root mean square roughness of CLPS film reached to 0.414 nm. XPS analysis further demonstrates that there was a CLPS film covered on the cotton surface. Hydrophobicity of the CLPS treated fabric was superior to that of the EPVMS treated one. Whiteness of the treated fabrics by CLPS and EPVMS did not change at all compared to the control. The softness of the two treated fabrics was both better than that of control and particularly the softness of the EPVMS treated fabrics was preferable. The CLPS treated fabric possessed good washing durability.     

Synthesis and properties of silicone polyetheramine block copolymer surfactant

In the presence of Pt catalyst, α,ω-hydrogenpolysiloxane reacted with allyl glycidyl ether, and an intermediate α,ω-diepoxysiloxane was formed. The epoxy cyclic-opening reaction was conducted between the intermediate and polyetheramine in isopropanol solution, the silicone polyetheramine block copolymer (BPEAS) was thus made. The chemical structures of BPEAS were characterized using IR and ¹H-NMR separately. Then cotton fabric was treated with BPEAS for application purpose. The finishing effects were tested in terms of film morphology, hydrophilic ability, softness and mechanical properties. The recorded results showed that BPEAS can be used directly to treat cotton fabrics without adding any emulsifier at the viscosity of 6700 mPa·s and amino value of 0.6009 mmol/g. Bending rigidity and hysteresis of the treated fabric decreased by 53.53 % and 67.39 %, the drape coefficient dropped by 15 %, whereas the wrinkle recovery angle increased by 57.14 %. The treated cotton fabric is hydrophilic, and has a bulky soft hand, better anti-wrinkle property compared to the untreated one.     

Antibacterial efficacy of polypyrrole in textile applications

This paper describes application and evaluation of polypyrrole as an antibacterial polymer. Polypyrrole was produced embedding two doping agents: chloride and dicyclohexyl sulfosuccinate ions. Stability of the antibacterial efficacy of polypyrrole deposited on cotton fabrics was assessed before and after three different kinds of washing (namely, laundering with anionic and non-ionic detergents and dry-cleaning). Polypyrrole showed excellent antibacterial properties (100 % of bacterial reduction) against Escherichia coli for both doping agents. Treated fabrics were further characterised by scanning electron microscopy, energy dispersive X-ray analysis and infrared spectroscopy. The antibacterial efficacy diminished after launderings with anionic and non-ionic detergents because of two different mechanisms: the neutralisation of positive charges under alkali conditions (dedoping), and a partial removal of polypyrrole by abrasion and surfactant action. After dry-cleaning, polypyrrole embedding chloride and dicyclohexyl sulfosuccinate ions still showed excellent antibacterial efficacy. Moreover, scanning electron microscopy investigations were used to intuitively explain the bactericidal mechanism of polypyrrole on Escherichia coli bacteria.     

Simultaneous application of silver nanoparticles with different crease resistant finishes

Textiles, especially those made of natural fibers, are suitable medium for the growth of microorganisms which causes disease transmission, stink, colorful spots, and reduction in fabric strength. This research focuses on the antimicrobial finishing of cotton fabrics using colloidal solution of silver nanoparticles. Due to the difficulties of adding a new step to the finishing process of cotton textiles, efforts have been made to combine the antimicrobial treatment with the conventional finishing processes. For this purpose two chemical finishes of Fixapret ECO as a crosslinking agent and Cellofix ME as a resin former have been used in anti crease finishing of cotton fabric and their effects were evaluated. The properties of the samples have been investigated by measuring the resistant of samples against bacteria, crease recovery angle, abrasion, and washing fastness. The results showed that treated samples by pad-dry method have the best antibacterial effect with a direct relation between the increase in drying temperature and antibacterial properties. However, the washing and abrasion fastness were not at the acceptable level. Co-application of the colloidal solution of silver nanoparticles with the crease resistant materials improved both fastness properties while at the same time limited the direct contact between the nanoparticles and the bacteria so the antibacterial efficiency was reduced. Subsequently, it was concluded that the antibacterial finishing method should be selected according to the end uses. In addition, antibacterial treatment could be one of the multi-purpose finishes for cotton fabric.     

In situ loading TiO<Subscript>2</Subscript> and its photocatalysis and UV resistance on cotton fabric

Anatase TiO₂ nanoparticles was in-situ formed on the cotton fabric by using tetrabutyl titanate (TBT) as a precursor through the normal pressure hydrothermal method. X-ray diffraction (XRD), Scanning electron microscopy (SEM), UV visible spectra (UV-VIS), ATR-IR were used as the characterization techniques. Photocatalytic performance of TiO₂ on the fabric surface was evaluated by methylene blue (MB), 4 kinds of the common living stains and three dyes under ultraviolet and visible light radiation. XRD analysis found that the TiO₂ loaded on the fabric was mainly anatase crystalline phase with particle size of 6.4 nm. SEM observed that a large number of nano TiO₂ particles are distributed on the fabric surface. UV-VIS test indicated that theTiO₂-coated fabric possessed an obvious absorption for ultraviolet. ATR-IR analysis indicated that the nano-TiO₂ possesses a strong affinity with the hydroxyl group of the cotton fabric, and the soaping tests showed that the TiO₂ was firmly bonded with the fabrics. The treated fabrics have good degradation ability for MB aqueous solution, and could degrade azo, anthraquinone and phthalocyanine dyes. The order of degradation of the common life stains was: pepper oil> tea > coffee > soy sauce.