Genetic analysis of calf market weight and carcass traits in Japanese Black cattle

Heritabilities of and genetic correlations between additive direct and maternal genetic effects for calf market weight, and additive direct genetic effects for carcass traits, were estimated for Japanese Black cattle by REML procedures under 2-trait animal models. Data were collected from calf and carcass markets in Hyogo and Tottori prefectures and analyzed separately by prefecture. Calf market weight was measured on 42,745 and 23,566 calves in Hyogo and Tottori, respectively. Only the fattening animals with calf market weight were extracted from the carcass database and used for estimation. The carcass traits analyzed were carcass weight, ribeye area, rib thickness, subcutaneous fat thickness, yield estimate, beef marbling score, and 4 meat characters (color, brightness, firmness, and texture). Direct and maternal heritabilities for calf market weight were estimated to be 0.22 and 0.07 in Hyogo, and 0.37 and 0.15 in Tottori, respectively. The estimates of heritabilities for carcass traits were moderate to high in both prefectures. The estimates of direct-maternal genetic correlations for calf market weight were positive (0.17) in Hyogo and negative (-0.63) in Tottori. The direct effect for calf market weight was positively correlated with the direct effect for carcass weight (0.87 and 0.56 in Hyogo and Tottori, respectively) but negatively correlated with the direct effect for beef marbling score (-0.10 in both prefectures). The estimates of genetic correlations between the maternal effect for calf market weight and the direct effects for carcass traits varied from -0.13 to 0.34 in Hyogo and from -0.14 to 0.15 in Tottori. Because direct and maternal genetic effects for early growth traits can be evaluated from calf market weight data in the production system of Japanese Black cattle, this information should be incorporated into selection and mating schemes of the breed.     

Estimated genetic parameters for carcass traits of Brahman cattle

Heritabilities and genetic and phenotypic correlations were estimated from feedlot and carcass data collected from Brahman calves (n = 504) in central Florida from 1996 to 2000. Data were analyzed using animal models in MTDFREML. Models included contemporary group (n = 44; groups of calves of the same sex, fed in the same pen, slaughtered on the same day) as a fixed effect and calf age in days at slaughter as a continuous variable. Estimated feedlot trait heritabilities were 0.64, 0.67, 0.47, and 0.26 for ADG, hip height at slaughter, slaughter weight, and shrink. The USDA yield grade estimated heritability was 0.71; heritabilities for component traits of yield grade, including hot carcass weight, adjusted 12th rib backfat thickness, loin muscle area, and percentage kidney, pelvic, and heart fat were 0.55, 0.63, 0.44, and 0.46, respectively. Heritability estimates for dressing percentage, marbling score, USDA quality grade, cutability, retail yield, and carcass hump height were 0.77, 0.44, 0.47, 0.71, 0.5, and 0.54, respectively. Estimated genetic correlations of adjusted 12th rib backfat thickness with ADG, slaughter weight, marbling score, percentage kidney, pelvic, and heart fat, and yield grade (0.49, 0.46, 0.56, 0.63, and 0.93, respectively) were generally larger than most literature estimates. Estimated genetic correlations of marbling score with ADG, percentage shrink, loin muscle area, percentage kidney, pelvic, and heart fat, USDA yield grade, cutability, retail yield, and carcass hump height were 0.28, 0.49, 0.44, 0.27, 0.45, -0.43, 0.27, and 0.43, respectively. Results indicate that sufficient genetic variation exists within the Brahman breed for design and implementation of effective selection programs for important carcass quality and yield traits.     

Genetic relationships between sex-specific traits in beef cattle: mature weight, weight adjusted for body condition score, height and body condition score of cows, and carcass traits of their steer relatives

Data from the first four cycles of the Germplasm Evaluation Program at the U.S. Meat Animal Research Center (USMARC) were used to investigate genetic relationships between mature weight (MW, n = 37,710), mature weight adjusted for body condition score (AMW, n = 37,676), mature height (HT, n = 37,123), and BCS (n = 37,676) from 4- to 8-yr old cows (n = 1,800) and carcass traits (n = 4,027) measured on their crossbred paternal half-sib steers. Covariance components among traits were estimated using REML. Carcass traits were adjusted for age at slaughter. Estimates of heritability for hot carcass weight (HCWT); percentage of retail product; percentage of fat; percentage of bone; longissimus muscle area; fat thickness adjusted visually; estimated kidney, pelvic, and heart fat percentage; marbling score; Warner-Bratzler shear force; and taste panel tenderness measured on steers were moderate to high (0.26 to 0.65), suggesting that selection for carcass and meat traits could be effective. Estimates of heritability for taste panel flavor and taste panel juiciness were low and negligible (0.05 and 0.01, respectively). Estimates of heritability from cow data over all ages and seasons were high for MW, AMW, and HT (0.52, 0.57, 0.71; respectively) and relatively low for BCS (0.16). Pairwise analyses for each female mature trait with each carcass trait were done with bivariate animal models. Estimates of genetic correlations between cow mature size and carcass composition or meat quality traits, with the exception of HCWT, were relatively low. Selection for cow mature size (weight and/or height) could be effective and would not be expected to result in much, if any, correlated changes in carcass and meat composition traits. However, genetic correlations of cow traits, with the possible exception of BCS, with HCWT may be too large to ignore. Selection for steers with greater HCWT would lead to larger cows.     

Direct and maternal genetic effects for carcass traits in beef cattle.

Carcass measurements were taken on 1,537 steers produced over four generations in a rotational crossbreeding study. Breed direct and maternal additive and heterotic genetic effects were estimated for hot carcass weight (HCWT), retail yield (RY), longissimus muscle area (LM), fat thickness (FT), marbling score (MS), and Warner-Bratzler shear force (WBS). Angus (A), Brahman (B), Charolais (C), and Hereford (H) breeds were involved in straightbred, first-cross, and two-, three-, and four-breed rotational crossbred matings with each crossbred combination including the B. Breed direct (Ig) and maternal (Mg) additive genetic effects and direct (Ih) and maternal (Mh) heterotic genetic effects were estimated using a multiple-regression model. The Ig and Mg effects were expressed as deviations from the overall mean. The IgC effects (Ig for C breed) were significant for HCWT, RY, and LM and resulted in leaner, heavier carcasses. The IgA and IgH effects were, in general, negative (P < .05) for HCWT, RY, LM, and WBS, and positive (P < .01) for FT and MS. The IgB effects were large and undesirable for HCWT, RY, LM, MS, and WBS (P < .01). The majority of Ih effects were beneficial (P < .05) for HCWT, RY, LM, and WBS. The Ih effects exhibited by B combinations were of greater (P < .05) magnitude with positive influences for HCWT, RY, and LM and desirable effects for WBS. The maternal additive and heterotic effects were of lesser importance than the direct additive and heterotic effects for the carcass traits studied.     

Genetic correlations between live yearling bull and steer carcass traits adjusted to different slaughter end points. 2. Carcass fat partitioning

Partial carcass dissection data from 1,031 finished crossbred beef steers were used to calculate heritabilities and genetic correlations among subcutaneous, intermuscular, and body cavity fat percentage and marbling score adjusted to slaughter age-, HCW-, fat depth-, and marbling score-constant endpoints. Genetic correlations were also calculated among these fat partitions with live growth and ultrasound traits evaluated in yearling beef bulls (n = 2,172) and steer carcass measurements. Heritabilities of the different fat partitions ranged from 0.22 (marbling score-constant body cavity fat) to 0.46 (HCW-constant marbling score). Genetic correlations between subcutaneous fat and intermuscular fat (rg = 0.16 to 0.32) and between intermuscular fat and body cavity fat (rg = 0.38 to 0.50) were more highly associated than subcutaneous fat and body cavity fat (rg = -0.08 to 0.05), indicating that fat depots are not under identical genetic control. Adjusting fat depots to different end points affected the magnitude but usually not the sign of the genetic correlations. Bull postweaning gain was associated with intermuscular (-0.24 to -0.35), body cavity (-0.24 to -0.29), and marbling fat (-0.24 to -0.39) in steers. Bull hip height was associated with body cavity (-0.20 to -0.29) and marbling fat (-0.20 to -0.47) in steers. Bull ultrasound fat depth was associated with subcutaneous (0.11 to 0.29), intermuscular (0.05 to 0.36), body cavity (0.27 to 0.49), and marbling fat (0.27 to 0.73) in steers. Bull ultrasound intramuscular fat percentage was associated with subcutaneous (-0.22 to -0.44) and intermuscular fat (-0.06 to 0.31) in steers. Bull ultrasound LM area was associated with body cavity (-0.25 to -0.31) and marbling fat (-0.25 to -0.30) in steers. Ultrasound LM width measurements were negatively correlated with subcutaneous fat (rg = -0.09 to -0.18), intermuscular fat (rg = -0.53 to -0.61), body cavity fat (rg = -0.63 to -0.69), and marbling score (rg = -0.75 to -0.87) at slaughter age-, HCW-, and fat depth-constant endpoints; correlations were generally lower at a marbling score-constant end point (rg = 0.07 to -0.49). Ultrasound indicator traits measured in seedstock may be useful in altering fat partitioning in commercial beef carcasses.     

Genetic correlation estimates between ultrasound measurements on yearling bulls and carcass measurements on finished steers.

Carcass and growth measurements of finished crossbred steers (n = 843) and yearling ultrasound and growth measurements of purebred bulls (n = 5,654) of 11 breeds were analyzed to estimate genetic parameters. Multiple-trait restricted maximum likelihood (REML) was used to estimate heritabilities and genetic correlations between finished steer carcass measurements and yearling bull ultrasound measurements. Separate analyses were conducted to examine the effect of adjustment to three different end points: age, backfat thickness, and weight at measurement. Age-constant heritability estimates from finished steer measurements of hot carcass weight, carcass longissimus muscle area, carcass marbling score, carcass backfat, and average daily feedlot gain were 0.47, 0.45, 0.35, 0.41, and 0.30, respectively. Age-constant heritability estimates from yearling bull measurements of ultrasound longissimus muscle area, ultrasound percentage of intramuscular fat, ultrasound backfat, and average daily postweaning gain were 0.48, 0.23, 0.52, and 0.46, respectively. Similar estimates were found for backfat and weight-constant traits. Age-constant genetic correlation estimates between steer carcass longissimus muscle area and bull ultrasound longissimus muscle area, steer carcass backfat and bull ultrasound backfat, steer carcass marbling and bull ultrasound intramuscular fat, and steer average daily gain and bull average daily gain were 0.66, 0.88, 0.80, and 0.72, respectively. The strong, positive genetic correlation estimates between bull ultrasound measurements and corresponding steer carcass measurements suggest that genetic improvement for steer carcass traits can be achieved by using yearling bull ultrasound measurements as selection criteria.     

Heterosis among closed lines of Hereford cattle. III. Postweaning growth and carcass traits in steers

Feedlot and carcass characteristics of 276 steers from five closed lines of Hereford cattle and reciprocal crosses among these lines were studied. The traits studied were initial weight, final weight, 224-d gain, days on test, hot carcass weight, marbling score, longissimus muscle area, fat thickness, yield grade, dressing percentage and shear force. Year of record was a significant source of variation for most traits. Age of dam was a significant source of variation for growth traits but not carcass traits. Line of sire affected initial weight, final weight, 224-d gain, days on test, marbling score and dressing percentage. Significant heterosis was observed only for hot carcass weight. Heterosis estimates were 1.9% for initial weight, 2.2% for final weight, 2.5% for 224-d gain, -2.1% for days on test, .6% for hot carcass weight, -.6% for marbling score, 0 for carcass grade, .6% for longissimus muscle area, 2.3% for backfat thickness, .9% for yield grade, -.9% for dressing percent and -10.9% for shear force. Initial age on test affected only hot carcass weight. Hot carcass weight, dressing percentage, marbling score, longissimus muscle area and fat thickness were affected by slaughter weight. Slaughter age affected dressing percent and marbling score.     

Across-breed adjustment factors for expected progeny differences for carcass traits

Adjustment factors to allow comparison of EPD from several breed associations for birth, weaning, and yearling weights have been available for more than 10 yr. This paper describes steps to calculate adjustment factors for EPD for 4 carcass traits: marbling score, fat thickness, ribeye area, and retail product percentage. The required information is the same as for the weight traits: 1) breed of sire solutions based on measurements on progeny at the US Meat Animal Research Center (USMARC) that have sires with breed association EPD, 2) mean EPD of sires weighted by number of progeny at USMARC (USMARC progeny not included in breed association EPD), and 3) mean EPD of nonparents from breed associations (defined as animals born 2 yr prior to calculation of EPD). Records at USM-ARC are adjusted to 100% heterozygosity because the purpose of the adjustment factors is to allow prediction of performance of progeny of sires mated to other breeds of dam. A critical step is to adjust breed of sire solutions, which are based on an earlier sample of sires, to the equivalent of a sample from a more recent nonparent group using the difference between mean EPD from information sources 2) and 3). The difference is multiplied by the coefficient of regression of USMARC progeny on EPD of their sires. With weight traits, these coefficients are not greatly different from unity. With the carcass traits, 2 sets of coefficients can be used depending on whether the EPD are based on carcass or ultrasound measurements. The regression coefficients also reflect differences in conditions for USMARC progeny (all steers) and factors associated with breed association EPD. Only for marbling score and ribeye area were any estimates of the regression coefficients near unity. For other traits, the coefficients ranged from 1.65 to 2.82. The solutions for breed of sire, differences in mean EPD, and regression coefficients are then used to calculate adjustment factors for EPD of 11 breeds including the arbitrary base breed, Angus.     

Genetic parameters for carcass traits and their live animal indicators in Simmental cattle

The objective of this study was to estimate parameters required for genetic evaluation of Simmental carcass merit using carcass and live animal data. Carcass weight, fat thickness, longissimus muscle area, and marbling score were available from 5,750 steers and 1,504 heifers sired by Simmental bulls. Additionally, yearling ultrasound measurements of fat thickness, longissimus muscle area, and estimated percentage of intramuscular fat were available on Simmental bulls (n = 3,409) and heifers (n = 1,503). An extended pedigree was used to construct the relationship matrix (n = 23,968) linking bulls and heifers with ultrasound data to steers and heifers with carcass data. All data were obtained from the American Simmental Association. No animal had both ultrasound and carcass data. Using an animal model and treating corresponding ultrasound and carcass traits separately, genetic parameters were estimated using restricted maximum likelihood. Heritability estimates for carcass traits were 0.48 +/- 0.06, 0.35 +/- 0.05, 0.46 +/- 0.05, and 0.54 +/- 0.05 for carcass weight, fat thickness, longissimus muscle area, and marbling score, respectively. Heritability estimates for bull (heifer) ultrasound traits were 0.53 +/- 0.07 (0.69 +/- 0.09), 0.37 +/- 0.06 (0.51 +/- 0.09), and 0.47 +/- 0.06 (0.52 +/- 0.09) for fat thickness, longissimus muscle area, and intramuscular fat percentage, respectively. Heritability of weight at scan was 0.47 +/- 0.05. Using a bivariate weight model including scan weight of bulls and heifers with carcass weight of slaughter animals, a genetic correlation of 0.77 +/- 0.10 was obtained. Models for fat thickness, longissimus muscle area, and marbling score were each trivariate, including ultrasound measurements on yearling bulls and heifers, and corresponding carcass traits of slaughter animals. Genetic correlations of carcass fat thickness with bull and heifer ultrasound fat were 0.79 +/- 0.13 and 0.83 +/- 0.12, respectively. Genetic correlations of carcass longissimus muscle area with bull and heifer ultrasound longissimus muscle area were 0.80 +/- 0.11 and 0.54 +/- 0.12, respectively. Genetic correlations of carcass marbling score with bull and heifer ultrasound intramuscular fat percentage were 0.74 +/- 0.11 and 0.69 +/- 0.13, respectively. These results provide the parameter estimates necessary for genetic evaluation of Simmental carcass merit using both data from steer and heifer carcasses, and their ultrasound indicators on yearling bulls and heifers.     

Performance, body composition and carcass characteristics of finishing steers as influenced by previous forage systems

To evaluate effects of previous forage systems on feedlot performance, yearling Hereford steers (average initial weight of 249 kg) were grazed on tall fescue (TF), smooth bromegrass-red clover (BG-RC) or orchardgrass-red clover (OG-RC) pastures before finishing. Serial slaughter was utilized during the first 2 yr of this study to determine changes in carcass characteristics throughout finishing, while steers were slaughtered at approximately 29% body fat during the third year. Steers grazing TF entered the feedlot at lighter weights and maintained lighter weights throughout finishing (P less than .05) even though dry matter intakes and feed conversions were similar (P greater than .05) among treatments. Steers that previously grazed TF had less (P less than .05) body fat, body protein, fat thickness and marbling, smaller (P less than .05) ribeye areas and lower (P less than .05) USDA yield and quality grades than than those that grazed BG-RC and OG-RC. However, linear contrasts indicated that steers grazing TF were compensating in ribeye area, marbling and quality grade as days in feedlot increased. This was confirmed in the third-year study, since carcass characteristics were similar among all steers. During the third year, linear and quadratic contrasts indicated that steers that grazed TF partially compensated in body protein. As days in feedlot increased, live and hot carcass weights, body fat, fat thickness, kidney, pelvic and heart fat, marbling, and USDA yield and quality grades increased (P less than .05), while ribeye area and body protein plateaued. Although carcass characteristics were similar among treatments, steers backgrounded on TF entered the feedlot at lighter weights, and partially compensated in weight after 134 d of finishing.     

Evaluation of performance characteristics in a diallel among Simmental, Limousin, Polled Hereford and Brahman beef cattle. II. Carcass traits

Evaluations of steer and heifer progeny from a diallel mating design of Simmental, Limousin, Polled Hereford and Brahman beef cattle over 5 yr are presented. Traits evaluated included final weight, hot carcass weight, ribeye area, 12th rib fat thickness, marbling score, yield grade, dressing percentage and percentage of kidney, pelvic and heart fat. Progeny of Simmental sires were heavier at slaughter than those with Brahman sires (P less than .05), but no differences were found for carcass weight. Dressing percentage was higher for Limousin crosses compared with progeny of other sire breeds (P less than .05). Similar results were found for dam breeds, except that progeny of Limousin dams had heavier carcasses with a higher dressing percentage (P less than .05) than Brahman crosses. Crosses of Limousin and Simmental had larger ribeye areas (P less than .05) compared with calves of the other breeds. Progeny of Polled Hereford dams had higher marbling scores and were fatter than progeny of dams of other breeds (P less than .05). Heterosis estimates were significant for all Brahman crosses for final weight, carcass weight and ribeye area, but these contrasts were negligible for other traits. Estimates of general combining ability were positive and significant for Simmental for final weight, carcass weight, ribeye area and marbling score and were significant and negative for Limousin for final weight, fat thickness and yield grade. Maternal values were generally small.     

Genetic response to selection for weaning weight or yearling weight or yearling weight and muscle score in Hereford cattle: efficiency of gain, growth, and carcass characteristics

An experiment involving crosses among selection and control lines was conducted to partition direct and maternal additive genetic response to 20 yr of selection for 1) weaning weight, 2) yearling weight, and 3) index of yearling weight and muscle score. Selection response was evaluated for efficiency of gain, growth from birth through market weight, and carcass characteristics. Heritability and genetic correlations among traits were estimated using animal model analyses. Over a time-constant interval, selected lines were heavier, gained more weight, consumed more ME, and had more gain/ME than the control. Over a weight-constant interval, selected lines required fewer days, consumed less ME, had more efficient gains, and required less energy for maintenance than control. Direct and maternal responses were estimated from reciprocal crosses among unselected sires and dams of control and selection lines. Most of the genetic response to selection in all three lines was associated with direct genetic effects, and the highest proportion was from postweaning gain. Indirect responses of carcass characteristics to selection over the 20 yr were increased weight of carcasses that had more lean meat, produced with less feed per unit of gain. At a constant carcass weight, selected lines had 1.32 to 1.85% more retail product and 1.62 to 2.24% less fat trim and 10/100 to 25/100 degrees less marbling than control. At a constant age, heritability of direct and maternal effects and correlations between them were as follows: market weight, 0.36, 0.14, and 0.10; carcass weight, 0.26, 0.15, and 0.03; longissimus muscle area, 0.33, 0.00, and 0.00; marbling, 0.36, 0.07, and -0.35; fat thickness, 0.41, 0.05, and -0.18; percentage of kidney, pelvic, and heart fat, 0.12, 0.08, and -0.76; percentage of retail product, 0.46, 0.05, and -0.29; retail product weight, 0.44, 0.08, -0.14; and muscle score, 0.37, 0.14, and -0.54. Selection criteria in all lines improved efficiency of postweaning gain and increased the amount of salable lean meat on an age- or weight-constant basis, but carcasses had slightly lower marbling scores.     

Genetic relationships between calving and carcass traits for Charolais and Hereford cattle in Sweden

The objective of this study was to estimate genetic correlations between calving difficulty score and carcass traits in Charolais and Hereford cattle, treating first and later parity calvings as different traits. Genetic correlations between birth weight and carcass traits were also estimated. Field data on 59,182 Charolais and 27,051 Hereford calvings, and carcass traits of 5,260 Charolais and 1,232 Hereford bulls, were used in bivariate linear animal model analyses. Estimated heritabilities were moderate to high (0.22 to 0.50) for direct effects on birth weight, carcass weight, and (S)EUROP (European Community scale for carcass classification) grades for carcass fleshiness and fatness. Heritabilities of 0.07 to 0.18 were estimated for maternal effect on birth weight, and for direct and maternal effects on calving difficulty score at first parity. Lower heritabilities (0.01 to 0.05) were estimated for calving difficulty score at later parities. Carcass weight was positively genetically correlated (0.11 to 0.53) with both direct and maternal effects on birth weight and with direct effects on calving difficulty score. Carcass weight was, however, weakly or negatively (-0.70 to 0.07) correlated with maternal calving difficulty score. Higher carcass fatness grade was genetically associated with lower birth weight, and in most cases, also with less difficult calving. Genetic correlations with carcass fleshiness grade were highly variable. Moderately unfavorable correlations between carcass fleshiness grade and maternal calving difficulty score at first parity were estimated for both Charolais (0.42) and Hereford (0.54). This study found certain antagonistic genetic relationships between calving performance and carcass traits for both Charolais and Hereford cattle. Both direct and maternal calving performance, as well as carcass traits, should be included in the breeding goal and selected for in beef breeds.     

Genetic analysis of carcass traits of steers adjusted to age, weight, or fat thickness slaughter endpoints

Carcass measurements from 1,664 steers from the Germ Plasm Utilization project at U.S. Meat Animal Research Center were used to estimate heritabilities (h(2)) of, and genetic correlations (r(g)) among, 14 carcass traits adjusted to different endpoints (age, carcass weight, and fat thickness): HCW (kg), dressing percent (DP), adjusted fat thickness (AFT, cm), LM area (LMA, cm(2)), KPH (%), marbling score (MS), yield grade (YG), predicted percentage of retail product (PRP), retail product weight (RPW, kg), fat weight (FW, kg), bone weight (BNW, kg), actual percentage retail product (RPP), fat percent (FP), and bone percent. Fixed effects in the model included breed group, feed energy level, dam age, birth year, significant (P < 0.05) interactions, covariate for days on feed, and the appropriate covariate for endpoint nested (except age) within breed group. Random effects in the model were additive genetic effect of animal and total maternal effect of dam. Parameters were estimated by REML. For some traits, estimates of h(2) and phenotypic variance changed with different endpoints. Estimates of h(2) for HCW, DP, RPW, and BNW at constant age, weight, or fat thickness were 0.27, -, and 0.41; 0.19, 0.26, and 0.18; 0.42, 0.32, and 0.50; and 0.43, 0.32, and 0.48, respectively. Magnitude and/or sign of r(g) also changed across endpoints for 54 of the 91 trait pairs. Estimates for HCW-LMA, AFT-RPW, LMA-YG, LMA-PRP, LMA-FW, LMA-RPP, and LMA-FP at constant age, weight, or fat thickness were 0.32, -, and 0.51; -0.26, -0.77, and -; -0.71, -0.89, and -0.66; 0.68, 0.85, and 0.63; -0.16, -0.51, and 0.22; 0.47, 0.57, and 0.27; and -0.44, -0.43, and -0.18, respectively. Fat thickness was highly correlated with YG (0.86 and 0.85 for common age and weight) and PRP (-0.85 and -0.82 for common age and weight), indicating that selection for decreased fat thickness would improve YG and PRP. Carcass quality, however, would be affected negatively because of moderate r(g) (0.34 and 0.35 for common age and weight) between MS and AFT. Estimates of h(2) and phenotypic variance indicate that enough genetic variation exists to change measures of carcass merit by direct selection. For some carcass traits, however, magnitude of change would depend on effect of endpoint on h(2) and phenotypic variance. Correlated responses to selection would differ depending on endpoint.     

Heterosis, maternal and direct effects in double-muscled and normal cattle: II. Carcass traits of young bulls

Data on 135 young bulls from a two-breed group diallel experiment involving double-muscled (DM) and normal (N) cattle were analyzed to obtain estimates of heterosis, maternal and direct effects for carcass traits. When carcass traits were adjusted to a constant age at slaughter (398.5 d), significant positive heterosis was observed for slaughter and carcass weights, carcass length and s.c. fat thickness. Maternal effect was relatively unimportant for the traits studied. The progeny of N sires and DM straightbreds were heavier at slaughter and had higher carcass weight, s.c. fat thickness and carcass length (P less than .01), whereas DM-sired progeny and DM straightbreds had higher dressing percentage (P less than .05) and cutability (P less than .01). Heterosis was significant for all the 10-11-12th rib joint dissection traits except for percentage of muscle. Although there was negative heterosis for percentage of bone, there was positive heterosis for rib joint weight, fat weight and percentage, muscle weight and muscle:fat and muscle:bone ratios. For direct effect and straightbred differences, N-sired progeny and N straightbreds, respectively, had significantly larger values for rib joint weight, fat weight and percentage and bone weight. The DM-sired progeny and DM straightbreds had larger values for percentage of muscle, muscle:fat and muscle:bone ratios. When the carcass and dissection traits were adjusted to a constant carcass (303.7 kg) and rib joint (4,812 g) weight, respectively, the results were similar to those observed on age constant basis except for rib eye area, for which DM-sired progeny and DM straightbreds had larger values.     

Genetic and environmental parameters for steer ultrasound and carcass traits

Carcass measurements for weight, longissimus muscle area, 12-13th-rib fat thickness, and marbling score, as well as for live animal measurements of weight at the time of ultrasound, ultrasound longissimus muscle area, ultrasound 12-13th-rib fat thickness, and ultrasound-predicted percentage ether extract were taken on 2,855 Angus steers. The average ages for steers at the time of ultrasound and at slaughter were 391 and 443 d, respectively. Genetic and environmental parameters were estimated for all eight traits in a multivariate animal model. In addition to a random animal effect, the model included a fixed effect for contemporary group and a covariate for measurement age. Heritabilities for carcass weight, carcass longissimus muscle area, carcass fat thickness, carcass marbling score, ultrasound weight, ultrasound longissimus muscle area, ultrasound fat thickness, and ultrasound-predicted percentage ether extract were 0.48, 0.45, 0.35, 0.42, 0.55, 0.29, 0.39, and 0.51, respectively. Genetic correlations between carcass and ultrasound longissimus muscle area, carcass and ultrasound fat thickness, carcass marbling score and ultrasound-predicted percentage ether extract, and carcass and ultrasound weight were 0.69, 0.82, 0.90, and 0.96, respectively. Additional estimates were derived from a six-trait multivariate animal model, which included all traits except those pertaining to weight. This model included a random animal effect, a fixed effect for contemporary group, as well as covariates for both measurement age and weight. Heritabilities for carcass longissimus muscle area, carcass fat thickness, carcass marbling score, ultrasound longissimus muscle area, ultrasound fat thickness, and ultrasound-predicted percentage ether extract were 0.36, 0.39, 0.40, 0.17, 0.38, and 0.49, respectively. Genetic correlations between carcass and ultrasound longissimus muscle area, carcass and ultrasound fat thickness, and carcass marbling and ultrasound-predicted percentage ether extract were 0.58, 0.86, and 0.94, respectively. The high, positive genetic correlations between carcass and the corresponding real-time ultrasound traits indicate that real-time ultrasound imaging is an alternative to carcass data collection in carcass progeny testing programs.     

Synthesis of direct and maternal genetic components of economically important traits from beef breed-cross evaluations

Published information on relative performance of beef breed crosses was used to derive combined estimates of purebred breed values for predominant temperate beef breeds. The sources of information were largely from the United States, Canada, and New Zealand, although some European estimates were also included. Emphasis was on maternal traits of potential economic importance to the suckler beef production system, but some postweaning traits were also considered. The estimates were taken from comparison studies undertaken in the 1970s, 1980s and 1990s, each with representative samples of beef breeds used in temperate agriculture. Weighting factors for breed-cross estimates were derived using the number of sires and offspring that contributed to that estimate. These weights were then used in a weighted multiple regression analysis to obtain single purebred breed effects. Both direct additive and maternal additive genetic effects were estimated for preweaning traits. Important genetic differences between the breeds were shown for many of the traits. Significant regression coefficients were estimated for the effect of mature weight on calving ease, both maternal and direct additive genetic, survival to weaning direct, and birth weight direct. The breeds with greater mature weight were found to have greater maternal genetic effects for calving ease but negative direct genetic effects on calving ease. A negative effect of mature weight on the direct genetic effect of survival to weaning was observed. A cluster analysis was done using 17 breeds for which information existed on nine maternal traits. Regression was used to predict breed-cross-specific heterosis using genetic distance. Only five traits, birth weight, survival to weaning, cow fertility, and preweaning and postweaning growth rate had enough breed-cross-specific heterosis estimates to develop a prediction model. The breed biological values estimated provide a basis to predict the biological value of crossbred suckler cows and their offspring.     

Whole-genome QTL scan for ultrasound and carcass merit traits in beef cattle using Bayesian shrinkage method

Fine mapping of quantitative trait loci (QTL) for 16 ultrasound measurements and carcass merit traits that were collected from 418 hybrid steers was conducted using 1207 SNP markers covering the entire genome. These SNP markers were evaluated using a Bayesian shrinkage estimation method and the empirical critical significant thresholds (α = 0.05 and α = 0.01) were determined by permutation based on 3500 permuted datasets for each trait to control the genome-wide type I error rates. The analyses identified a total of 105 QTLs (p < 0.05) for seven ultrasound measure traits including ultrasound backfat, ultrasound marbling and ultrasound ribeye area and 113 QTLs for seven carcass merit traits of carcass weight, grade fat, average backfat, ribeye area, lean meat yield, marbling and yield grade. Proportion of phenotypic variance accounted for by a single QTL ranged from 0.06% for mean ultrasound backfat to 4.83% for carcass marbling (CMAR) score, while proportion of the phenotypic variance accounted for by all significant (p < 0.05) QTL identified for a single trait ranged from 4.54% for carcass weight to 23.87% for CMAR.     

Postweaning growth and carcass traits in crossbred cattle from Hereford, Angus, Norwegian Red, Swedish Red and White, Friesian, and Wagyu maternal grandsires

The objective of this study was to characterize breeds representing diverse biological types for postweaning growth and carcass composition traits in terminal crossbred cattle. Postweaning growth and carcass traits were analyzed on 434 steers and 373 heifers obtained by mating F1 cows to Charolais sires. Maternal grandsires represented Hereford, Angus, and MARC III (1/4 Hereford, 1/4 Angus, 1/4 Pinzgauer, and 1/4 Red Poll) dams to Hereford or Angus (British Breeds), Norwegian Red, Swedish Red and White, Wagyu, or Friesian breeds. Breed groups were slaughtered serially in each of 2 yr (2002 and 2003). Postweaning ADG, slaughter weight, hot carcass weight, dressing percentage, percentage Choice, LM area, marbling score, USDA yield grade, fat thickness, retail product yield (percentage), retail product weight, fat yield (percentage), fat weight, bone yield (percentage), and bone weight were analyzed. Maternal grandsire breed was significant (P < 0.05) for all traits except dressing percentage, percentage Choice, and LM area. Marbling score for animals with Norwegian Red, Wagyu, Swedish Red and White, British Breeds, and Friesian inheritance was 550, 544, 532, 530, and 515, respectively (SEM = 8). Retail product weight for these animals was 224, 211, 227, 223, and 223 kg, respectively (SEM = 2 kg). Maternal granddam breed was not significant for any of the traits analyzed. Grandsire breed effects can be optimized by selection and use of appropriate crossbreeding systems.     

Effects of percentage Brahman and Angus breeding, age-season of feeding and slaughter end point on feedlot performance and carcass characteristics

Steers (n = 165) of known percentage Brahman (B) and Angus (A) breeding were used to study effects of breed group (A, 3/4A:1/4B, 1/2A:1/2B, 1/4A:3/4B), age-season of feeding (calves fed during the cool season vs yearlings fed during the warm season) and slaughter end point (less than .90, 1.0 to 1.15, 1.27 to 1.40, greater than or equal to 1.5 cm of adjusted fat over the ribeye) on feedlot performance and carcass characteristics. The 1/2B and 3/4B steers had heavier (P less than .05) initial and final feedlot weights than the A and 1/4B steers and higher (P less than .05) unshrunk ADG than the A steers did. Breed types did not differ for feed efficiency. Yearling steers fed in the warm season had higher (P less than .05) unshrunk ADG than calves fed in the cool season, but ADG calculated on an empty-rumen basis did not differ between the two age-seasons of feeding. Calves fed in the cool season were more efficient (P less than .05) than yearlings fed in the warm season when efficiency was expressed on an empty-rumen basis; however, on a live weight basis there was no difference in feed efficiency. No breed group by age-season of feeding interactions on performance were detected. Slaughter end point did not significantly affect feed efficiency on an empty-rumen basis. The 1/2B and 3/4B steers had smaller ribeye areas (REA) per 100 kg hot carcass and lower marbling scores than the 1/4B and A steers. Yearlings fed in the warm season produced heavier carcasses (P less than .05) than calves fed in the cool season. As s.c. fat thickness at slaughter increased, hot carcass weight and numerical yield grade increased, whereas REA per 100 kg of hot carcass decreased. Marbling also increased as fatness increased up to about 1.5 cm subcutaneous fat.