Water use by alfalfa,maize, and barley as influenced by available soil water

The availability of soil water is one of the most important determinants of crop production. Field studies were conducted to examine the relationships between relative evapotranspiration ($\text{E}\text{E}{}_{\mathrm{<mtext>max</mtext>}}$) and available water (W) for alfalfa, maize, and barley. Line source sprinkler irrigation systems were used to provide the variations in soil moisture. Actual evapotranspiration (E) was determined using the water balance method. Maximum evapotranspiration (E_max) was the highest E observed among all irrigation levels. Potential evapotranspiration (E₀) was estimated using Penman's equation to characterize the evaporative demand.The results show that the relationships between $\text{E}\text{E}{}_{\mathrm{<mtext>max</mtext>}}$ and W were different for the three crops. For alfalfa, the relationship was dependent on the physical properties of the soil and on E₀. In a clay loam soil, the decline in E from E_max commenced at a higher value of W than in a sandy loam soil. Furthermore, the rate of decline in E from E_max was dependent on E₀ and was greater as E₀ increased. In the sandy loam soil, the relationship between $\text{E}\text{E}{}_{\mathrm{<mtext>max</mtext>}}$ and W was not dependent on E₀. For maize and barley in clay loam soils, $\text{E}\text{E}{}_{\mathrm{<mtext>max</mtext>}}$ as a function of W was linear, and was not dependent on E₀. This study was compared to results reported in the literature, and it was hypothesized that differences were related mainly to the way variation in soil moisture was introduced over the measurement period.     

An analysis of the effect of the vertical fissuring in mole-drained soils on drain performances

Numerical solutions of the seepage equation of groundwater flow were used in an analysis of the effect on drain performance of the herring-bone pattern of vertical fissuring, with fractures fanning out from the central slit, in mole-drained soils. Drain performances were assessed from values of the dimensionless parameter $\text{W}{}_{\mathrm{<mtext>m</mtext>}}\text{=}\text{2E}{}_{\mathrm{<mtext>m</mtext>}}\text{qD}{}^2$, where E_m is the ‘seepage potential’ at the position of maximum water-table height when the steady rainfall is q and the drain spacing is 2D. W_m decreased with increase in the length of the fractures and, to a lesser extent, with decrease in the spacing of them, showing that the fracturing enables a mole-drainage system to cope with higher rainfall rates and to produce more rapid water-table drawdowns.     

Evaluation of a crop water stress index for irrigation scheduling of bermudagrass

This study was conducted to assess crop water stress index (CWSI) of bermudagrass used widely on the recreational sites of the Mediterranean Region and to study the possibilities of utilization of infrared thermometry to schedule irrigation of bermudagrass. Four different irrigation treatments were examined: 100% (I₁), 75% (I₂), 50% (I₃), and 25% (I₄) of the evaporation measured in a Class A pan. In addition, a non-irrigated treatment was set up to determine CWSI values. The status of soil water content and pressure was monitored using a neutron probe and tensiometers. Meanwhile the canopy temperature of bermudagrass was measured with the infrared thermometry. The empirical method was used to compute the CWSI values. In this study, the visual quality of bermudagrass was monitored seasonally using a color scale. The best visual quality was obtained from I₁ and I₂ treatments. Average seasonal CWSI values were determined as 0.086, 0.102, 0.165, and 0.394 for I₁, I₂, I₃, and I₄ irrigation treatments, respectively, and 0.899 for non-irrigated plot. An empirical non-linear equation, Qave=1+⌊6[1+(4.853 CWSIave)^2.27]^−0.559⌋$Q_{\text{ave}}=1+⌊6{[1+{(4.853\text{CWS}{\text{I}}_{\text{ave}})}^{2.27}]}^{-0.559}⌋$, was deduced by fitting to measured data to find a relation between quality and average seasonal CWSI values. It was concluded that the CWSI could be used as a criterion for irrigation timing of bermudagrass. An acceptable color quality could be sustained seasonally if the CWSI value can be kept about 0.10.     

Wheat root distribution,water extraction pattern and grain yield as influenced by time and rate of irrigation

The effect of first irrigation (26, 40 and 54 days after seeding) and the rate of irrigation (5.5, 7.5 and 9.5 cm) applied subsequently at $\text{IW}\text{E}{}_{\mathrm{<mtext>pan</mtext>}}$ ratio of 0.9 on wheat root distribution, water extraction pattern and grain yield was studied on a barrier-free, sandy loam soil. The crop developed a more extensive root system when the first irrigation was applied after 26 days than after 40 and 54 days. With the first irrigation on the 26th day, the crop, receiving subsequent irrigations less frequently but at a heavier rate, developed a deeper root system than the crop receiving frequent, light irrigations. The water extraction pattern corresponded with the root distribution pattern. A relatively small difference in root density in the deeper layers caused a greater difference in soil water content than in the upper layers. Light and frequent irrigations produced maximum grain yields. However, for developing an extensive root system and enhancing water utilization in the subsoil, an early, light irrigation with subsequent irrigations applied less frequently at a relatively heavier rate seems desirable.     

Effect of mixed cation solutions on hydraulic soil properties

Hydraulic conductivity (K) and soil water diffusivity (D) characterizing water flow under saturated and unsaturated conditions, respectively, were determined for a sandy loam and a clay loam soil, using water with different combinations of total electrolyte concentrations, C (i.e., 20, 40, 80, 125 and 250 meq 1^?1) and sodium adsorption ratios, SAR (i.e., 0, 20, 30, 40, 80 and ∞ mmole $\text{l}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>2</mtext>}}$). Both K and D were found to increase with C and decrease with SAR. In low sodium adsorption ratio ranges (i.e., up to 20) the requirement of electrolyte concentration to maintain relative hydraulic conductivity = 0.5 was relatively more for sandy loam than for clay loam soil. However, the trend for electrolyte concentration requirements for the two soils was reversed at high sodium adsorption ratios (i.e. > 20). A spline function was used to draw the best fitting line through the data points of horizontal absorption experiments.     

The effect of organic manuring and water quality on water transmission parameters and sodication of a sandy loam soil

Water transmission characteristics under saturated and unsaturated conditions were studied in a sandy loam soil with (F₁) and without (F₀) long-term farmyard manure (FYM) treatments, in relation to sodium adsorption ratios (SAR) and electrolyte concentrations of water. The effect of FYM and ratios of Ca²⁺ : Mg²⁺ in water at a given SAR on sodication of the soil was also studied.Saturated hydraulic conductivity (k) and weighted mean diffusivity ($\text{D}\text{?}$) were slightly higher for F₁ than for F₀, whereas sodication indices like Gapon constant (K_G), Krishnamoorthy-Davis-Overstreet constant (K_KDO) and Vanselow constant (K_V) were slightly smaller. The k and $\text{D}\text{?}$ decreased with an increase of SAR and decrease of electrolyte concentration, the effect of SAR being more pronounced. There was proportionately a sharper decrease in the k and $\text{D}\text{?}$ values at SAR 10 with total electrolyte concentrations of 10–40 meq 1^?1. However, with a total electrolyte concentration of 80 meq 1^?1, there was a smaller drop at SAR 10.A small difference in the build-up of exchangeable sodium percentage (ESP) in F₁ and F₀ treatments at a given SAR suggests that, apart from slightly improving water transmission parameters, the use of FYM also reduces the sodication hazard in a soil irrigated with sodic waters. An increase in the Ca²⁺ : Mg²⁺ ratio from 25:75 to 75:25 slightly decreased the values of K_G, K_KDO and K_V, thus indicating somewhat more preference for Ca²⁺ to Mg²⁺ at a given SAR, which was more so in F₁ soil. This fact could also be expressed in terms of a slight shift of thermodynamic exchange constant (K) and standard free energy change of the exchange reaction (ΔG⁰_r). The presence of some unidentified Na⁺ releasing minerals in the soils studied was observed and correction for exchangeable Na⁺ determination applied.     

Field evaluation of crop yield as affected by nonuniformity of sprinkler-applied water and fertilizers

The determination of target uniformity for sprinkler irrigation system should consider the impacts of nonuniformity of water and fertilizers on crop yield. Field experiments were therefore conducted in north China plains to address the impacts of nonuniformly applied water and fertilizers on winter wheat yield. Irrigation water and fertilizers were applied through a solid set sprinkler system. Three experimental plots were used with seasonal Christiansen uniformity coefficients (arithmetic mean of individual CUs) ranging from 62 to 82%. Each plot was divided into $\text{3}\text{m}\text{×3}\text{m}$ grids. Sprinkler water depth and concentration of fertilizer solution for each grid was measured both below and above the canopy for each individual irrigation event. The spatial distribution of soil moisture for each experimental plot was also measured periodically to determine irrigation times and amounts. On harvest, grain yield and total nitrogen content of plant stems were measured for each grid. The experimental results showed that the uniformity of fertilizer applied increased with sprinkler water uniformity. The distributions of both fertilizers and water applied through sprinkler system can be represented by a normal distribution function. Field experiments also demonstrated that the uniformity of sprinkler-applied water and fertilizers has insignificant effect on winter wheat yield for the studied uniformity range. The current standard for sprinkler uniformity (for example, the target CU is equal to or higher than 75% in China) is high enough for obtaining a reasonable crop yield in dry sub-humid regions.     

Daylight crop water stress index for continuous monitoring of water status in apple trees

We studied the suitability of empirical crop water stress index (CWSI) averaged over daylight hours (CWSI_d) for continuous monitoring of water status in apple trees. The relationships between a midday CWSI (CWSI_m) and the CWSI_d and stem water potential (ψ _stem), and soil water deficit (SWD) were investigated. The treatments were: (1) non-stressed where the soil water was close to field capacity and (2) mildly stressed where SWD fluctuated between 0 and a maximum allowable depletion (MAD of 50 %). The linear relationship between canopy and air temperature difference (ΔT) and air vapor pressure deficit (VPD) averaged over daylight hours resulted in a non-water-stressed baseline (NWSBL) with higher correlation (?T = ?0.97 VPD – 0.46, R ² = 0.78, p < 0.001) compared with the conventional midday approach (?T = ?0.59 VPD – 0.67, R ² = 0.51, p < 0.001). Wind speed and solar radiation showed no significant effect on the daylight NWSBL. There was no statistically meaningful relationship between midday ψ _stem and CWSI_m. The CWSI_d agreed well with SWD (R ² = 0.70, p < 0.001), while the correlation between SWD and CWSI_m was substantially weaker (R ² = 0.38, p = 0.033). The CWSI_d exhibited high sensitivity to mild variations in the soil water content, suggesting it as a promising indicator of water availability in the root zone. The CWSI_d is stable under transitional weather conditions as it reflects the daily activity of an apple crop.     

Irrigation with coalbed natural gas co-produced water

Water quality is one of the potential concerns associated with the development of coalbed natural gas (CBNG) in the Powder River Basin (PRB) of Wyoming and Montana. Large quantities of water (hereafter referred to as CBNG water) are being co-produced and often discharged in the process of exploring natural gas from coal seams. Use of CBNG water for irrigating croplands may be beneficial if factors associated with soil salinity and sodicity are controlled. This study evaluated effects of five water and three soil treatments applied to a mixed-hay cropland on selected soil chemical properties using a split plot design. Water treatments consisted of Piney Creek water (PC or control), direct irrigation with CBNG water (electrical conductivity or EC of 1.38 dS m⁻¹ and sodium adsorption ratio or SAR of 24.3 mmol^1/2 L^−1/2) with no amendments (NT), CBNG water mixed with solution grade gypsum (G), CBNG water acidified using sulfur burner and mixed with gypsum (GSB) and CBNG water mixed with Piney Creek water (PC/CBNG). Soil treatments consisted of gypsum (G), elemental sulfur (S), combination of these two (GS) and no treatment or the control (NT). Pre (Summer 2003) and post treatment (Fall 2004) soil samples were collected to a depth of 60 cm (top three horizons: A, Bt₁ and Bt₂) to evaluate the effects of treatments on soil pH, EC, SAR, and sulfate (SO₄²⁻) concentrations. Comparisons between pre and post irrigation soil chemistry data indicated CBNG water with no amendments significantly increased (P ≤ 0.05) Na⁺ concentration within the soil profile. Plots treated with a combination of the GSB water treatment and the GS soil amendments were most effective in maintaining the low SAR values at surface soil layer. In all treatment combinations, both EC and SAR increased significantly in the top two sampling depths (A and Bt₁ horizons). Further studies are required to evaluate applications of leaching fractions at the end of each irrigation season for its effectiveness at moving Na⁺ below the rooting zone.