Functional and Nutritional Characteristics of Soft Wheat Grown in No‐Till and Conventional Cropping Systems

The effects of no‐till versus conventional farming practices were evaluated on soft wheat functional and nutritional characteristics, including kernel physical properties, whole wheat composition, antioxidant activity, and end‐product quality. Soft white winter wheat cultivar ORCF 102 was evaluated over a two‐year period from three long‐term replicated no‐till versus conventional tillage studies in Oregon. Wheat from the no‐till cropping systems generally had greater test weight, kernel diameter, and kernel weight and had softer kernels compared with wheat from the conventional tillage systems. Compared with the conventional systems, no‐till whole wheat flour had lower protein and SDS sedimentation volume. Ash content as well as most minerals measured (calcium, copper, iron, magnesium, and zinc), except for manganese and phosphorus, were generally slightly lower in no‐till than in conventional wheat. Whole wheat flour from the no‐till cropping systems generally had slightly lower total phenolic content and total antioxidant capacity. Milling properties, including flour yield, break flour yield, and mill score, were not affected by tillage systems. Refined flour from no‐till systems had lower protein, SDS sedimentation volume, and lactic acid and sucrose solvent retention capacities compared with flour from conventional tillage. No‐till wheat generally had greater sugar‐snap cookie diameter than conventionally tilled wheat. In conclusion, no‐till soft white winter wheat generally had slightly reduced nutritional properties (protein, ash, most minerals, and total antioxidant content) compared with wheat from conventionally tilled systems, and it had equivalent or sometimes superior functional properties for baking cookie‐type products.     

Influence of Soft Kernel Texture on the Flour,Water Absorption,Rheology, and Baking Quality of Durum Wheat

Durum wheat (Triticum turgidum subsp. durum ) production worldwide is substantially less than that of common wheat (T. aestivum ). Durum kernels are extremely hard; thus, most durum wheat is milled into semolina, which has limited utilization. Soft kernel durum wheat was created by introgression of the puroindoline genes via homoeologous recombination. The objective of this study was to determine the effects of the puroindoline genes and soft kernel texture on flour, water absorption, rheology, and baking quality of durum wheat. Soft Svevo and Soft Alzada, back‐cross derivatives of the durum varieties Svevo and Alzada, were compared with Svevo, a hard durum wheat, Xerpha, a soft white winter wheat, and Expresso, a hard red spring wheat. Soft Svevo and Soft Alzada exhibited soft kernel texture; low water, sodium carbonate, and sucrose solvent retention capacities (SRCs); and reduced dough water absorptions similar to soft wheat. These results indicate a pronounced effect of the puroindolines. Conversely, SDS flour sedimentation volume and lactic acid SRC of the soft durum samples were more similar to the Svevo hard durum and Expresso samples, indicating much less effect of kernel softness on protein strength measurements. Alveograph results were influenced by the inherent differences in water absorption properties of the different flours and their genetic background (e.g., W and P were markedly reduced in the Soft Svevo samples compared with Svevo, whereas the puroindolines appeared to have little effect on L ). However, Soft Svevo and Soft Alzada differed markedly for W and L . Soft durum samples produced bread loaf volumes between the soft and hard common wheat samples but larger sugar‐snap cookie diameters than all comparison samples. The soft durum varieties exhibited new and unique flour and baking attributes as well as retaining the color and protein characteristics of their durum parents.     

Effect of Soft Kernel Texture on the Milling Properties of Soft Durum Wheat

Worldwide, nearly 20 times more common wheat (Triticum aestivum) is produced than durum wheat (T. turgidum subsp. durum). Durum wheat is predominately milled into coarse semolina owing to the extreme hardness of the kernels. Semolina, lacking the versatility of traditional flour, is used primarily in the production of pasta. The puroindoline genes, responsible for kernel softness in wheat, have been introduced into durum via homoeologous recombination. The objective of this study was to determine what impact the introgression of the puroindoline genes, and subsequent expression of the soft kernel phenotype, had on the milling properties and flour characteristics of durum wheat. Three grain lots of Soft Svevo and one of Soft Alzada, two soft‐kernel back‐cross derived durum varieties, were milled into flour on the modified Quadrumat Senior laboratory mill at 13, 14, and 16% temper levels. Samples of Svevo (a durum wheat and recurrent parent of Soft Svevo), Xerpha (a soft white winter wheat), and Expresso (a hard red spring wheat) were included as comparisons. Soft Svevo and Soft Alzada exhibited dramatically lower single‐kernel characterization system kernel hardness than the other samples. Soft Svevo and Soft Alzada had high break flour yields, similar to the common wheat samples, especially the soft hexaploid wheat, and markedly greater than the durum samples. Overall, Soft Svevo and Soft Alzada exhibited milling properties and flour quality comparable, if not superior, to those of common wheat.     

Assessing Environmental Influences on Solvent Retention Capacities of Two Soft White Spring Wheat Cultivars

The solvent retention capacity test (SRC) (AACC Approved Method 56‐11) of flour is used to evaluate multiple aspects of wheat (Triticum aestivum L.) quality including pentosan content, starch damage, gluten strength, and general water retention based on the ability of flour to retain a range of solvents. The objectives of this study were to evaluate the effects of grain production environment in general and crop irrigation and fertility management in particular on SRC of soft wheat flour, and to evaluate the ability of SRC to predict end‐use quality across diverse environments. Two soft white spring wheat cultivars ‘Pomerelle’ and ‘Centennial’ were produced in a range of irrigated and rain‐fed production environments. SRC profiles and milling and baking quality parameters were measured. In a two‐year study at Aberdeen, ID, with two late‐season irrigation management regimes and two crop nitrogen fertility treatments, only wheat genotype significantly affected flour SRC. In two‐year studies at Tetonia, ID, one conducted under rain‐fed conditions and the other under irrigation, additional fertilizer applied at anthesis did not affect SRC. Correlations among quality parameters were determined using the Aberdeen and Tetonia flour samples, as well as samples of the same genotypes grown in fertility trials under rain‐fed conditions at Havre and Bozeman, MT, and under irrigation at Bozeman. Patterns of correlations among SRC values were similar for both genotypes. Grain test weight was negatively correlated with sodium carbonate and sucrose SRC of both genotypes. Flour protein was strongly positively correlated with sucrose and lactic acid SRC of both genotypes. The optimal regression models for predicting sugar snap cookie diameter (AACC Approved Method 10‐52) as a function of protein, SRC, flour extraction, and kernel hardness were different for the two cultivars. SRC evaluations of flours from these trials were consistent with large genotype and environment effects, yet minimal genotype × environment interaction. This suggests that selection among genotypes within an environment will produce a gain‐from‐selection observable in multiple and diverse environments.     

Structural Modifications of Gluten Proteins in Strong and Weak Wheat Dough During Mixing

The network‐forming attributes of gluten have been investigated for decades, but no study has comprehensively addressed the differences in gluten network evolution between strong and weak wheat types (hard and soft wheat). This study monitored changes in SDS protein extractability, SDS‐accessible thiols, protein surface hydrophobicity, molecular weight distribution, and secondary structural features of proteins during mixing to bring out the molecular determinants of protein network formation in hard and soft wheat dough. Soft wheat flour and dough exhibited greater protein extractability and more accessible thiols than hard wheat flour and dough. The addition of the thiol‐blocking agent N‐ethylmaleimide (NEM) resulted in similar results for protein extractability and accessible thiols in hard and soft wheat samples. Soft wheat dough had greater protein surface hydrophobicity than hard wheat and exhibited a larger decrease in surface hydrophobicity in the presence of NEM. Formation of high‐molecular‐weight (HMW) protein in soft wheat dough was primarily because of formation of disulfides among low‐molecular‐weight (LMW) proteins, as indicated by the absence of changes in protein distribution when NEM was present, whereas in hard wheat dough the LMW fraction formed disulfide interaction with the HMW fraction. Fourier transform infrared spectroscopy indicated formation of β‐sheets in dough from either wheat type at peak mixing torque. Formation of β‐sheets in soft wheat dough appears to be driven by hydrophobic interactions, whereas disulfide linkages stabilize secondary structure elements in hard wheat dough.     

Comparison of Quality Characteristics and Breadmaking Functionality of Hard Red Winter and Hard Red Spring Wheat

Various whole‐kernel, milling, flour, dough, and breadmaking quality parameters were compared between hard red winter (HRW) and hard red spring (HRS) wheat. From the 50 quality parameters evaluated, values of only nine quality characteristics were found to be similar for both classes. These were test weight, grain moisture content, kernel size, polyphenol oxidase content, average gluten index, insoluble polymeric protein (%), free nonpolar lipids, loaf volume potential, and mixograph tolerance. Some of the quality characteristics that had significantly higher levels in HRS than in HRW wheat samples included grain protein content, grain hardness, most milling and flour quality measurements, most dough physicochemical properties, and most baking characteristics. When HRW and HRS wheat samples were grouped to be within the same wheat protein content range (11.4–15.8%), the average value of many grain and breadmaking quality characteristics were similar for both wheat classes but significant differences still existed. Values that were higher for HRW wheat flour were color b*, free polar lipids content, falling number, and farinograph tolerance. Values that were higher for HRS wheat flour were geometric mean diameter, quantity of insoluble polymeric proteins and gliadins, mixograph mix time, alveograph configuration ratio, dough weight, crumb grain score, and SDS sedimentation volume. This research showed that the grain and flour quality of HRS wheat generally exceeds that of HRW wheat whether or not samples are grouped to include a similar protein content range.     

Effect of Dark,Hard, and Vitreous Kernel Content on Protein Molecular Weight Distribution and on Milling and Breadmaking Quality Characteristics for Hard Spring Wheat Samples from Diverse Growing Regions

Kernel vitreousness is an important grading characteristic for segregation of subclasses of hard red spring (HRS) wheat in the United States. This research investigated the protein molecular weight distribution (MWD) and the flour and baking quality characteristics of different HRS wheat market subclasses. The U.S. regional crop quality survey samples obtained from six regions for three consecutive growing years were used for subclass segregation based on the dark, hard, and vitreous (DHV) kernel percentage. Flour milled from HRS wheat with greater percentages of DHV kernel showed higher water absorption capacity for breadmaking. Protein MWD parameters could be related to the association between DHV kernel level and water absorption. Specifically, flour protein fractions rich in gliadins and high‐molecular‐weight polymeric proteins in the SDS‐unextractable fraction were identified to have significant and positive correlations with both DHV kernels and flour water absorption levels. An example further showed the importance of flour water absorption on potential economic incentives that can be gained with having a greater percentage of vitreous kernels. This information could help the flour milling and baking industry to segregate the different subclasses of HRS wheat with varying DHV content for their intended end‐use applications.     

Agronomic Practices at Low Environmental Impact for Durum Wheat in Mediterranean Conditions

The application of conservative agricultural practices such as crop rotation, shallow tillage, and organic fertilizer could usefully sustain crop yield and increase soil fertility, thus playing an important role in the sustainable agriculture. This study was conducted to determine the effects of conservative agronomic practices on yield and quality of wheat. The effects of these practices on soil fertility were further investigated in this four-year study (2005–2008). Two cropping systems, durum wheat in continuous cropping, and in two-year rotation with leguminous crops, were investigated at Foggia (Southern Italy) in rain-fed conditions. Within each cropping system, two levels of crop management were compared: i) conventional, characterized by a higher soil tillage management and mineral fertilizers application; ii) conservative, with a lower soil tillage management and organic-mineral fertilizers. The seasonal weather greatly affected the wheat yield and quality, inducing lower production in years that were characterized by unfavorable climatic conditions. This trend was found when the conventional treatment was applied, both in continuous cropping and rotations. The effects of cropping systems and crop management pointed out the positive role played by the leguminous crops (common vetch and chickpea) in crop rotation. This introduction improved wheat yield in rotation (6.47% compared to the continuous cropping), improved grain protein content (5.88%), and reduced the productive gap between conventional and conservative treatments (9.24 and 14.14% of the wheat in rotation and continuous cropping, respectively). Conversely, the effects of cropping systems and crop management on soil fertility were not very high, since the differences found at the end of the study in total nitrogen values were poor. However, total organic carbon (16.04 and 17.58% for cropping system and crop management, respectively) and available phosphorus values (11.30 and 7.43%) depend on root organic matter contribution, plant biomass residues, and fertilizations. The suitable crop rotation and the sustainable crop management appear important agronomical practices to improve yield and quality of wheat, and may reduce the environmental risks resulting from conventional intensive cropping systems.     

Milling Quality and White Salt Noodle Color of Chinese Winter Wheat Cultivars

Improvement of milling quality is an important aspect in wheat breeding programs. However, the milling quality of Chinese wheats remains largely unexplored. Fifty‐seven Chinese winter wheat cultivars from four regions were used to investigate the variation of milling quality parameters and to determine the associations between milling quality traits and color of noodle sheet. Substantial variation was presented for all measured parameters in this germplasm pool. Complete soft, hard, and medium‐hard types were observed. Soft wheat and hard wheat show significant differences in flour ash content, flour bran area, and flour color grade. No simple trait can be used to select for flour milling quality. High flour ash content and bran speck area contributed negatively to brightness of dry flour. Correlation coefficients (r) between L* value of dry flour and flour ash content and bran speck area were ‐0.47 and ‐0.65 for hard cultivars, and ‐0.51 and ‐0.72 for soft cultivars, respectively. Flour color grade (FCG) was significantly and positively associated with bran speck area; r = 0.56 and 0.73 for hard and soft wheats, respectively. There was a high correlation between FCG and L* value of flour water slurry (r = ‐0.95). Strong associations were also established between milling quality index (MQI) and FCG, L* value of dry flour, flour‐water slurry, and white salted noodle sheet for both hard and soft wheats. In conclusion, substantial progress could be achieved in improvement of milling quality in Chinese winter wheats through genetic selection, and FCG and MQI could be two important parameters for evaluation of milling quality in breeding programs.     

Image Analysis Approach to Understand the Differences in Flour Particle Surface and Shape Characteristics

The separation efficiency of wheat flour particles based on size, with minimum bran contamination, is important for a flour mill. Separation of flour during fractionation depends on the surface characteristics and shape of flour particles. Wheat flour particle characteristics such as surface lipid content, roughness, and morphology with respect to particle size were studied to better understand the differences between hard and soft wheat flours. Fractal analysis using image analysis was used to ascertain surface roughness. That was in turn verified by atomic force microscopy measurements. Soft wheat flours (soft red winter and soft white) had a higher degree of surface roughness than the hard wheat flours (hard red spring, hard red winter, and hard white). The fractal dimension values ranged from 2.67 to 2.78 and from 2.28 to 2.55 for soft and hard wheat flours, respectively. The surface lipid content increased with particle size in hard wheat but decreased in soft wheat flours. The surface lipid levels ranged from 1.02 to 1.18 and from 2.55 to 2.58% (% of total area) for 45 μm particles in hard wheat flours (hard red spring, hard red winter, and hard white) and soft wheat flours (soft red winter and soft white), respectively. For the 90 μm particles the lipid levels ranged from 1.54 to 1.62 and from 1.70 to 1.83% (% of total area) for flour particles in hard wheat flours (hard red spring, hard red winter, and hard white) and soft wheat flours (soft red winter and soft white), respectively. Surface lipid content and roughness values showed that soft wheat flours will be more cohesive than hard wheat flours. The morphology values revealed the irregularity in flour particles, irrespective of wheat class and particle size, owing to nonuniform fragmentation of protein and starch matrix of the wheat endosperm.     

Modeling End‐Use Quality in U.S. Soft Wheat Germplasm

End‐use quality in soft wheat (Triticum aestivum L.) can be assessed by a wide array of measurements, generally categorized into grain, milling, and baking characteristics. Samples were obtained from four U.S. regional nurseries. Selected parameters included test weight, kernel hardness, kernel size, kernel diameter, wheat protein, polyphenol oxidase activity, flour yield, break flour yield, flour ash content, milling score, flour protein content, flour SDS sedimentation volume, flour swelling volume, Rapid Visco Analyzer peak paste viscosity, solvent retention capacity (SRC) parameters, total and water‐extractable arabinoxylan (TAX and WEAX, respectively), and cookie diameter. The objectives were to model cookie diameter and lactic acid SRC as well as to compare exceptionally performing varieties for each quality parameter. Cookie diameter and lactic acid SRC were modeled by using multiple regression analyses and all of the aforementioned quality parameters. Cookie diameter was positively associated with peak paste viscosity and was negatively associated with or modeled by kernel hardness, flour protein content, sodium carbonate SRC, lactic acid SRC, and water SRC. Lactic acid SRC was positively modeled by break flour yield, milling score, flour SDS sedimentation volume, and sucrose SRC and was negatively modeled by flour protein content. Exceptionally high‐ and low‐performing varieties were selected on the basis of their responses to the aforementioned characteristics in each nursery. High‐ and low‐performing varieties exhibited notably wide variation in kernel hardness, break flour yield, milling score, sodium carbonate SRC, sucrose SRC, water SRC, TAX content, and cookie diameter. This high level of variation in variety performance can facilitate selection for improved quality based on exceptional performance in one or more of these traits. The models described allow a more focused approach toward predicting soft wheat quality.     

Effects of Kernel Vitreousness and Protein Level on Protein Molecular Weight Distribution,Milling Quality,and Breadmaking Quality in Hard Red Spring Wheat

Dark, hard, and vitreous kernel content is an important grading characteristic for hard red spring (HRS) wheat in the United States. This research investigated the associations of kernel vitreousness (KV) and protein content (PC) levels with protein molecular weight distribution (MWD), milling quality, and breadmaking quality characteristics of HRS wheat. The U.S. regional crop quality survey samples from three consecutive growing years were combined into three composite samples with different levels of wheat PC and then further segregated into separate samples with three different levels of KV. Analysis of variance showed that KV level had significant (P < 0.001) effect on variation in test weight, break flour yield, and damaged starch content. Among protein MWD parameters analyzed by size‐exclusion HPLC, the high‐molecular‐weight polymeric proteins in the SDS‐unextractable fraction had significant (P < 0.01) association with KV. Regression analysis indicated that addition of KV to the PC level improved the model for both farinograph and baking water absorption values in all three growing years. This information could help the flour milling and baking industries to further segregate HRS wheat based on KV levels in addition to PC levels for their intended end‐use applications.     

长期定位施肥对两种小麦耕作系统土壤肥力的影响

为寻求既能提高土壤肥力又能改善土壤环境的科学施肥模式,本研究以黄土高原长武30 a长期小麦连作和小麦–豌豆两个轮作系统为研究对象,以长期肥料定位试验(包括氮磷+有机肥配施NPM、氮磷配施NP、单施磷肥P、单施氮肥N、单施有机肥M和CK)土壤有机质、碱解氮、速效磷、速效钾、全磷和全钾为基础数据,应用土壤的综合肥力指标值(...     

Great Northern Bean Could Improve the Nutritional Value of Instant Noodles

Instant noodles were prepared by substituting hard red winter (HRW) wheat flour with Great Northern bean powder (GNBP) at selected levels (0–60%) using a pilot‐scale noodle processing machine. The functional properties, water absorption, water solubility, and pasting profiles of flour mixtures were tested to verify the process tolerances of ingredients. Prepared noodle samples were evaluated for color, cooking quality, texture, and sensory properties. Slight color differences, an increased cooking loss, and reduced chewiness, cohesiveness, and hardness were observed in cooked noodles that were prepared with GNBP up to 25% of HRW wheat flour weight. The results suggest that HRW wheat flour could be replaced up to 20% (w/w) with GNBP, while still using the conventional processing conditions, to improve the product nutritional value (i.e., increased protein and fiber contents and reduced fat content) (P < 0.05).     

Predicting Wheat Quality Characteristics and Functionality Using Near‐Infrared Spectroscopy

The accuracy of using near‐infrared spectroscopy (NIRS) for predicting 186 grain, milling, flour, dough, and breadmaking quality parameters of 100 hard red winter (HRW) and 98 hard red spring (HRS) wheat and flour samples was evaluated. NIRS shows the potential for predicting protein content, moisture content, and flour color b* values with accuracies suitable for process control (R² > 0.97). Many other parameters were predicted with accuracies suitable for rough screening including test weight, average single kernel diameter and moisture content, SDS sedimentation volume, color a* values, total gluten content, mixograph, farinograph, and alveograph parameters, loaf volume, specific loaf volume, baking water absorption and mix time, gliadin and glutenin content, flour particle size, and the percentage of dark hard and vitreous kernels. Similar results were seen when analyzing data from either HRW or HRS wheat, and when predicting quality using spectra from either grain or flour. However, many attributes were correlated to protein content and this relationship influenced classification accuracies. When the influence of protein content was removed from the analyses, the only factors that could be predicted by NIRS with R² > 0.70 were moisture content, test weight, flour color, free lipids, flour particle size, and the percentage of dark hard and vitreous kernels. Thus, NIRS can be used to predict many grain quality and functionality traits, but mainly because of the high correlations of these traits to protein content.     

Quality studies on wheat grown in different cropping systems: a holistic perspective

Spring wheat from a conventional (CONV) and an organic (ORG1) cropping system, both with animals, and from an organic system without animals (ORG2) was evaluated with respect to baking quality for the years 1995–2002. Amino acid (AA) composition was studied in both spring and winter wheat in 1993 and 2000–2002. The data were combined in multivariate analysis for exploration of the main factors responsible for the variation in quality. The most important factor for baking quality was weather conditions. High rainfall in May favoured baking quality in both cropping systems with animals, as did high temperature in May and high rainfall in July in the ORG1 system, and low rainfall in August in the CONV system. The only significant difference between the cropping systems was falling number, which was higher in ORG1 (252 s) than in CONV (205 s), probably due to a heavier CONV crop stand causing more difficult drying conditions. AA composition differed more between years than between cropping systems for both winter and spring wheat. The content of essential amino acids was high under the weather conditions associated with poor baking quality. The contents of threonine and leucine in spring wheat were significantly higher in ORG1, 1.76 and 8.11 g/100 g crude protein than in CONV, 1.63 and 7.72, respectively. In the interaction between AA and baking quality in spring wheat, it was possible to determine a correlation between phenylalanine, histidine, lysine and good baking properties. The primary effect was associated with weather conditions, but there was also an effect of differences between the cropping systems.     

Production of Starch with Very Low Protein Content from Soft and Hard Wheat Flours by Jet Milling and Air Classification

Jet milling is a fluid energy impact‐milling technique generally used for the ultrafine reduction of higher value materials. The efficiency of jet milling combined with air classification appears very efficient to separate starch from other wheat flour aggregate components and to produce wheat starch with very low residual protein content. Indeed, residual protein content of the starch‐rich fraction can be reduced to <2% db with a series of successive grinding and air classification operations. Lipid and pentosan contents were also reduced in the starch‐rich fraction. Nevertheless, jet milling cannot eliminate grinding differences observed between different types of wheat. Wheat hardness continues to have an effect on milling and classification yields and on the composition of air classification fractions. To obtain starch‐rich fraction with only 2% protein content, hard wheat flour required a series of at least five grinding steps, whereas only three steps are necessary for soft wheat flour. Under these conditions, hard wheat flours give 24% mass yield with 12% starch damage compared with 39% yield and a low starch damage content (6.4%) for soft wheat flour. These results highlight new prospects for the development of cereal flours, especially soft wheat flours.     

Developing Agreement Between Very Short Flow and Longer Flow Test Wheat Mills

Variations in soft wheat moisture content and kernel texture greatly affected the flour yield produced by a small (short flow) microtest mill (Quadrumat Jr.). An algorithm was developed that adjusted Quadrumat Jr. flour yield to 15% wheat moisture content, precluding the need to temper the wheat before milling. Another algorithm was developed to adjust Quadrumat flour yield relative to a constant softness equivalent (measurement of kernel texture) obtained during the micromilling procedure. Predicting the flour yield of the longer flow Allis‐Chalmers mill from Quadrumat Jr. unadjusted flour yield (R ² = 0.55) was compared with predicting Allis‐Chalmers flour yield from the Quadrumat Jr. adjusted flour yield (R ² = 0.90) across five diverse confirmation data sets. An algorithm to adjust flour yield for softness equivalent was individually developed for soft and hard wheats. Representative micromilling flour yield and softness equivalent data could be produced using as little as 10 g of untempered wheat and ≈3 min of operator time.     

Soil chemical quality changes and implications for fertilizer management after 11 years of no‐tillage wheat production systems in semiarid Morocco

A long‐term experiment comparing no‐till with conventional tillage systems across five rotations was evaluated 11 years after initiation. The objectives of the present paper are (1) to report differences in soil chemical properties (namely soil organic matter, total nitrogen, phosphorus, potassium and pH) that have resulted by converting from conventional to no‐till under contrasting cropping systems and (2) to draw tentative conclusions and recommendations on fertility status and fertilizer use and management. Soil in the no‐till system had increased surface soil organic C levels relative to conventional tillage regardless of rotation. In addition, depending on the rotation, the N and P content of the soil improved with no‐till compared with conventional tillage. In other words, no‐till has helped to retain soil organic matter (SOM), conserved more N, and resulted in increased extractable P and exchangeable K concentrations in the upper root‐zone. Hence, wheat produced in a no‐till system may receive more nutrients from decomposition of SOM and acidification of the seed zone. It is possible that lesser amounts of fertilizer nutrients will be needed because of the greater efficiency of nutrient cycling in no‐till systems relative to conventional systems. Copyright © 2001 John Wiley & Sons, Ltd.     

Effects of Genotype and Environment on Glutenin Polymers and Breadmaking Quality

Six genotypes of hard red spring (HRS) wheat were grown at seven environments in North Dakota during 1998. Effects of genotype and environment on glutenin polymeric proteins and dough mixing and baking properties were examined. Genotype, environment, and genotype‐by‐environment interaction all significantly affected protein and dough mixing properties. However, different protein and quality measurements showed differences for relative influences of genotype and environment. Total flour protein content and SDS‐soluble glutenin content were influenced more by environmental than genetic factors, while SDS‐insoluble glutenin content was controlled more by genetic than environmental factors. Significant genotypic and environmental effects were found for the size distribution of SDS‐soluble glutenins and between SDS‐soluble and SDS‐insoluble glutenins as well as % SDS‐insoluble glutenins. With increased flour protein content, the proportions of monomeric proteins and SDS‐insoluble glutenin polymers appeared to increase, but SDS‐soluble glutenins decreased. Flour protein content and the size distribution between SDS‐soluble and SDS‐insoluble glutenin polymers were significantly correlated with dough mixing properties. Environment affected not only total flour protein content but also the content of different protein fractions and size distributions of glutenin polymers, which, in turn, influenced properties of dough mixing. Flour protein content, % SDS‐insoluble glutenin polymers in flour, and ratio of SDS‐soluble to SDS‐insoluble glutenins all were highly associated with dough mixing properties and loaf volume.