Effect of Metals on Decolorization of Reactive Blue HERD by <Emphasis Type="Italic">Comamonas</Emphasis> sp. UVS

Comamonas sp. UVS was able to decolorize Reactive Blue HERD (RBHERD) dye (50 mg L^?1) within 6 h under static condition. The maximum dye concentration degraded was 1,200 mg L^?1 within 210 h. A numerical simulation with the model gives an optimal value of 35.71?±?0.696 mg dye g^?1 cell h^?1 for maximum rate (V_max) and 112.35?±?0.34 mg L^?1 for the Michaelis constant (K_m). Comamonas sp. UVS has capability of decolorization of RBHERD in the presence of Mg²⁺, Ca²⁺, Cd²⁺, and Zn²⁺, whereas decolorization was completely inhibited by Cu²⁺. Metal ions also affected the levels of biotransformation enzymes during decolorization of RBHERD. Comamonas sp. UVS was also able to decolorize textile effluent with significant reduction in COD. The biodegradation of RBHERD dye was monitored by UV–vis spectroscopy, FTIR spectroscopy, and HPLC.     

Enhanced dissipation of DEHP in soil and simultaneously reduced bioaccumulation of DEHP in vegetable using bioaugmentation with exogenous bacteria

The widely used plastic film containing di(2-ethylhexyl) phthalate (DEHP) in agriculture has caused serious soil pollution and poses risks to human health through the food chain. An effective DEHP degradation bacteria, Microbacterium sp. J-1, was newly isolated from landfill soil. Response surface methodology was successfully employed for optimization resulting in 96% degradation of DEHP (200 mg L^?1) within 5 days. This strain degraded DEHP by hydrolysis of the ester bond and hydroxylation of the aromatic ring to form 2-ethyl hexanol, mono-(2-ethylhexyl) phthalate, phthalate acid, and protocatechuic acid, and subsequently transformed these compounds with a maximum specific degradation rate (q _max), half-saturation constant (K _s ), and inhibition constant (K _i ) of 1.46 day^?1, 180.2 mg L^?1, and 332.8 mg L^?1, respectively. Bioaugmentation of DEHP-contaminated soils with the strain J-1 greatly enhanced the DEHP dissipation rate (~88%). Moreover, this strain could efficiently colonize the rhizosphere soil of inoculated vegetables and further enhanced DEHP degradation (~97%), leading to a significant decrease (>70%) in DEHP accumulation in shoots and roots of the inoculated vegetables compared to uninoculated vegetables. The results highlighted the roles of the inoculated exogenous bacteria in simultaneously bioremediating contaminated soils and reducing bioaccumulation of DEHP in the edible part of the vegetable for food safety.     

Evaluation of Vertical-Flow Constructed Wetlands for Swine Wastewater Treatment

In this study, the role of Cyperus sp. was evaluated for removal of pollutants from swine wastewater. Vertical-flow pilot scale constructed wetlands (CWs) operating with a hydraulic retention time (HRT) of 72 h were monitored in a greenhouse, located in Viçosa, Brazil. Significant differences were observed for the following parameters: Kjeldahl nitrogen, total phosphorus, alkalinity and electric conductivity, with averages removals of 37.5 and 28.5%, 55.9 and 44.4%, 30.2 and 25.6 and 26.1% and 22.9% (for planted and unplanted CWs, respectively). The rate of dry matter yield from Cyperus sp. was 7.5 g?m^?2 day^?1, and the nutrient uptake capacities were 21.8, 2.1, 14.0 and 0.9 g?m^?2 of N, P, K and Na, respectively. Evapotranspiration (2.7 mm day^?1) was statistically higher in the planted CWs. Plants in the CWs are important for achieving high nutrient removal.     

Dominant Characteristics Between <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis> and <Emphasis Type="Italic">Cyclotella</Emphasis> Sp. Accompanying Dilution Process in Eutrophic Lake

Although dilution of lake water has been used for improvement of water quality and algal blooms control, it has not necessarily succeeded to suppress the blooms. We hypothesized that the disappearance of algal blooms by dilution could be explained by flow regime, nutrient concentrations, and their interaction. This study investigated the effects of daily renewal rate (d), nitrogen (N) and phosphorus (P) concentration, and their interaction on the domination between Microcystis aeruginosa and Cyclotella sp. through a monoxenic culture experiment. The simulation model as functions of the N:P mass ratio and dilution rate (D) (calculated from d) was constructed, and the dominant characteristics of both species were predicted based on the model using parameters obtained in a monoculture experiment and our previous study. Results of monoxenic culture experiment revealed that M. aeruginosa dominated in all conditions (d = 5 or 15%; N = 1.0 or 2.5 or 5.0 mg-N L^?1; P = 0.1 or 0.5 mg-P L^?1) and the predicted cell densities were substantially correspondent to experimental data. Under various N:P ratios and D values, characteristics of domination for each species were predicted, indicating that Cyclotella sp. tended to be dominant under high P concentrations (P ≥ 0.36 mg-P L^?1) when the N:P ratio was less than 7.0, and M. aeruginosa could not form algal blooms at the N:P ratio ≤ 7.0 (N ≤ 0.7 mg-N L^?1). It was also suggested that the dilution rate leading to the Cyclotella sp. domination required 0.20 day^?1 or higher regardless of the N:P ratios.

Open image in new window

Graphical Abstract ? M. aeruginosa and Cyclotella sp. could be a superior competitor in nutrient-limited and nutrient-rich conditions, respectively. ? The simulation model in this study indicated that the predicted cell density and nutrient concentration were substantially correspondent to experimental data. ? The model predicted that Cyclotella sp. tended to be dominant at the P ≥ 0.36 mg-P L^?1 when the N:P ratio was less than 7.0, and M. aeruginosa could not form algal blooms at the N:P ratio ≤ 7.0 (N ≤ 0.7 mg-N L^?1).

     

A Comparative Study on Removal Efficiency of Cr(VI) in Aqueous Solution by <Emphasis Type="Italic">Fusarium</Emphasis> sp. and <Emphasis Type="Italic">Myrothecium</Emphasis> sp.

Environmental pollution with chromium is due to residues of several industrial processes. Bioremediation is an alternative actually considered to remove Cr (VI) from the environment, using adapted organisms that grow in contaminated places. Have been conducted studies with fungi mechanisms of interaction with chromium, most of which have focused on processes biosorption, characterized it by passive binding of metal components of the cell surface, and bioaccumulation, wherein the metal entry to cells occurs with energy expenditure. The paper presents the results of studies carried out on sorption of chromium (VI) ions from aqueous solutions by Fusarium sp. and Myrothecium sp. Both biomasses have the ability to take up hexavalent chromium during the stationary phase of growth and as well inactive conditions. Fusarium sp. showed 26% of biosorption with active biomass and 64% in inactive biomass; meanwhile, Myrothecium sp. obtained 97 and 82%, respectively. Both fungi showed adjust to pseudo-second-order model in active (Fusarium sp. R ² = 0.99; Myrothecium sp. R ² = 0.96) and inactive biomass assay (Fusarium sp. R ² = 0.99; Myrothecium sp. R ² = 0.99). The data of the active biomass test also confirmed to the intraparticle diffusion model (Fusarium sp. R ² = 0.98; Myrothecium sp. R ² = 0.93). The results obtained through this investigation indicate the possibility of treating waste effluents containing hexavalent chromium using Fusarium sp. and Myrothecium sp.     

Nitrogen transformation rates and N<Subscript>2</Subscript>O producing pathways in two pasture soils

Purpose

Better understanding of N transformations and the regulation of N₂O-related N transformation processes in pasture soil contributes significantly to N fertilizer management and development of targeted mitigation strategies.

Materials and methods

¹⁵N tracer technique combined with acetylene (C₂H₂) method was used to measure gross N transformation rates and to distinguish pathways of N₂O production in two Australian pasture soils. The soils were collected from Glenormiston (GN) and Terang (TR), Victoria, Australia, and incubated at a soil moisture content of 60% water-filled pore space (WFPS) and at temperature of 20 °C.

Results and discussion

Two tested pasture soils were characterized by high mineralization and immobilization turnover. The average gross N nitrification rate (n_tot) was 7.28 mg N kg^?1 day^?1 in TR soil () and 5.79 mg N kg^?1 day^?1 in GN soil. Heterotrophic nitrification rates (n_h), which accounting for 50.8 and 41.9% of n_tot, and 23.4 and 30.1% of N₂O emissions in GN and TR soils, respectively, played a role similar with autotrophic nitrification in total nitrification and N₂O emission. Denitrification rates in two pasture soils were as low as 0.003–0.004 mg N kg^?1 day^?1 under selected conditions but contributed more than 30% of N₂O emissions.

Conclusions

Results demonstrated that two tested pasture soils were characterized by fast N transformation rates of mineralization, immobilization, and nitrification. Heterotrophic nitrification could be an important NO₃^?–N production transformation process in studied pasture soils. Except for autotrophic nitrification, roles of heterotrophic nitrification and denitrification in N₂O emission in two pasture soils should be considered when developing mitigation strategies.

     

<Emphasis Type="Italic">Trichoderma</Emphasis> improves the growth of <Emphasis Type="Italic">Leymus chinensis</Emphasis>

Bio-fertilizer application has been proposed as a strategy for enhancing soil fertility, regulating soil microflora composition, and improving crop yields, and it has been widely applied in the agricultural yields. However, the application of bio-fertilizer in grassland has been poorly studied. We conducted in situ and pot experiments to investigate the practical effects of different fertilization regimes on Leymus chinensis growth, with a focus on the potential microecological mechanisms underlying the responses of soil microbial composition. L. chinensis biomass was significantly (P?<?0.05) increased by treatment with 6000 kg ha^?1 of Trichoderma bio-fertilizer compared with other treatments. We found a positive (R² =?0.6274, P <?0.001) correlation between bacterial alpha diversity and L. chinensis biomass. Hierarchical cluster analysis and nonmetric multidimensional scaling (NMDS) revealed that soil bacterial and fungal community compositions were all separated according to the fertilization regime used. The relative abundance of the most beneficial genera in bio-fertilizer (BOF) (6000 kg ha^?1Trichoderma bio-fertilizer) was significantly higher than in organic fertilizer (OF) (6000 kg ha^?1 organic fertilizer) or in CK (non-amend fertilizer), there the potential pathogenic genera were reduced. There were significant negative (P?<?0.05) correlations between L. chinensis biomass and the relative abundance of several potential pathogenic genera. However, the relative abundance of most beneficial genera were significantly (P?<?0.05) positively correlated with L. chinensis biomass. Soil properties had different effects on these beneficial and on these pathogenic genera, further influencing L. chinensis biomass.     

Metam Sodium (MS) in Water and Cane Juice at Different Processing Conditions According to the Industrial Case. Part 1. Effects of Matrix,pH, Temperature,Processing Time,and Photolysis

The process for extracting sugarcane juice (Saccharum officinarum) represents the point of greatest contamination in sugarcane mills. Sodium dithiocarbamate also known as metam-sodium or MS is added to inhibit the growth of microorganisms especially Leuconostoc mesenteroides which is responsible for forming polysaccharides. Metam-sodium, upon decomposition, produces highly toxic byproducts. According to literature, under acidic conditions, MS is hydrolyzed resulting in methylamine (MA), CH₃NH₂, and carbon disulfide (CS₂), and in dilute alkaline solutions, MS produces an oxidation reaction characterized by the formation of elemental sulfur (S) and methyl isothiocyanate (MITC). In this paper, it was studied how MS decomposes to MITC and/or MA considering the effects of the matrix (methanol and water); of temperature (4 and 25 °C); of processing time (0, 1, 2, 3, 4 days); and of pH (4.0, 4.5, 7.0). A second experimental design considering the effects of the matrix (water and sugarcane juice); of temperature (4, 25, 35, 45 °C); of processing time (30, 300 min); and of pH (4.0, 4.5, 7.0) was derived from the results obtained considering MITC and/or MA formation. According to the statistical analysis of these results (p < 0.05), the order of the influential factors was as follows: time > matrix > pH > temperature. Results also indicated that the water matrix at pH = 4.5 and 45 °C had the lowest degradation rate (k), with a value of 8.82 day^?1, while for the sugarcane juice matrix at the same pH and temperature conditions was larger, with a k value of 30.07 day^?1. These results show that the matrix is also important for the degradation of dithiocarbamate to MITC and to MA.     

Chemical Behavior of U(VI) in the Presence of Soil Components

Soil components from different environments (forest (OF), semiarid (SZ), and sand (AS)) were separated from fulvic and humic substances, characterized by DRX, EDS(SEM), and zero-charge points were determined. The sorption of U(VI) by these materials was determined considering contact time, concentration of U(VI), pH, ionic strength, and presence of sodium chloride and humic acids. The time to reach the kinetic sorption equilibrium was ca. 1 min for the components of the SZ and AS soils, whereas those from OF required longer times. The zero-charge points of the materials indicate that in the experimental conditions, the surfaces of the materials are positively charged, as are uranyl ions. The sorption kinetic data were well fitted to the pseudo-second-order model, which indicates chemical sorption. The maximum sorption capacities for U(VI) obtained from data fitted to the Langmuir model of OF and SZ were 49 and 19.8 mg g^?1 respectively. Sorption isotherm data for AS were best fitted to the Freundlich model (q_e?=?5.4 mg g^?1). The maximum values of distribution coefficients (K_d) were 23?±?7 L kg^?1, 545?±?64 L kg^?1, and 1178?±?229 L kg^?1 for AS, SZ, and OF, respectively; these values may depend on pH, contact time, initial concentration of U(VI), and the composition of the materials. Sodium chloride in the aqueous solutions affects U(VI) sorption by the materials SZ and AS. The effect of humic acids depends on pH, only in acid media soluble humate complexes may be formed.     

Effect of Cadmium Stress on Growth and Electrical Impedance Spectroscopy Parameters of <Emphasis Type="Italic">Cotinus coggygria</Emphasis> Roots

The use of plants for ecological remediation is an important method of controlling heavy metals in polluted land. Cotinus coggygria is a landscape plant that is used extensively in landscaping and afforestation. In this study, the cadmium tolerance level of C. coggygria was evaluated using electrical impedance spectroscopy (EIS) to lay a theoretical foundation for broad applications of this species in Cd-polluted areas and provide theoretical support to broaden the application range of the EIS technique. Two-year-old potted seedlings of C. coggygria were placed in a greenhouse to analyse the changes in the growth, water content and EIS parameters of the roots following treatment with different Cd concentrations (50, 100, 200, 500, 1000 and 1500 mg kg^?1), and soil without added Cd was used as the control. The roots grew well following Cd treatments of 50 and 100 mg kg^?1. The Cd contents increased with the increase in Cd concentration in the soil. However, the lowest root Cd content was found at 4 months of treatment. The extracellular resistance r_e and the intracellular resistance r_i increased first overall and then decreased with the increasing Cd concentration, and both parameters increased with a longer treatment duration. The water content had a significant negative correlation with the Cd content (P?<?0.01) and the r_e (P?<?0.05). C. coggygria could tolerate a soil Cd concentration of 100 mg kg^?1. There was a turning point in the growth, water content and EIS parameters of the C. coggygria roots when the soil Cd concentration reached 200 mg kg^?1. The root water content and r_e could reflect the level of Cd tolerance in C. coggygria.     

Combined biochar and nitrogen fertilizer reduces soil acidity and promotes nutrient use efficiency by soybean crop

Purpose

Soil acidification is universal in soybean-growing fields. The aim of our research was to evaluate the effects of soil additives (N fertilizers and biochar) on crop performance and soil quality with specific emphasis on ameliorating soil acidity.

Materials and methods

Four nitrogen treatments were applied as follows: no nitrogen (N0), urea (N1), potassium nitrate (N2), and ammonium sulfate (N3), each providing 30 kg N ha^?1. Half plot area of the N1, N2, and N3 treatments was also treated with biochar (19.5 t ha^?1) to form N-biochar treatments (N1C, N2C, N3C). Both bulk and rhizosphere soils were sampled separately for the following analyses: pH, exchangeable base cations (EBC), exchangeable acidity (EA), total inorganic N (IN), total N (TN), and microbial phospholipid fatty acids (PLFAs). Soybean biomass and nutrient contents were also determined. Correlation analysis was applied to analyze the relationships between soil chemical properties and soybean plant parameters.

Results and discussion

With N-biochar additions (N1C, N2C, N3C), soil chemical properties changed as follows: pH increased by 0.6–1.2 units, EBC, IN, and TN increased by 175–419, 38.5–54.7, and 136–452 mg kg^?1, respectively, and PLFAs increased by 23.6–40.9 nmol g^?1 compared to the N0 in the rhizosphere. Microbial PLFAs had positive correlations with soil pH; EBC; exchangeable K, Ca, Na, and Mg; TN; IN; NH₄ ⁺; and NO₃ ^? (r?=?0.66–0.84, p?<?0.01). There were negative correlations between PLFAs and EA or exchangeable Al (r?=??0.64, ?0.66, p?<?0.01), which indicated that the additives increased microbial biomass by providing a suitable environment with less acid stress and more nutrients. The additives increased soil NH₄ ⁺ and NO₃ ^? by promoting soil organic N mineralization and reducing NH₄ ⁺ and NO₃ ^? leaching. Moreover, the soybean seed biomass and the nutrient contents in seeds increased with N-biochar additions, especially in the N3C treatment.

Conclusions

N-biochar additions were effective in ameliorating soil acidity, which improved the microenvironment for more microbial survival. N-biochars influenced N transformations at the plant–soil interface by increasing organic N mineralization, reducing N leaching, and promoting N uptake by soybeans. The soil additive ammonium and biochar (N3C) were best in promoting soybean growth.

     

Nitrogen Removal, N2O Emission, and NH3 Volatilization Under Different Water Levels in a Vertical Flow Treatment System

Two series of laboratory-scale vertical flow systems (flooded and nonflooded columns) were designed to compare nitrogen removal performance, nitrous oxide emission, and ammonia volatilization under different water levels upon treating diluted digested livestock liquid. In these systems, influent was supplied at three hydraulic loading rates (HLRs of 1.25, 2.5, and 5 cm day^?1) during stage 1 and the rates were doubled during stage 2 when the water levels of nonflooded columns were elevated from zero to half the height of the soil column. After hydraulic loading rates doubled, the average removal rates of total nitrogen in flooded columns varied from 1.27 to 2.94 g^?2 day^?1 and those in nonflooded columns ranged from 1.23 to 3.88 g^?2 day^?1. The T-N removal at an HLR of 10 cm day^?1 in the nonflooded column with an elevated water table level had higher efficiency than that in the flooded column, suggesting T-N removal is enhanced in the nonflooded column probably due to the improved coupled nitrification–denitrification process under the elevated water table level condition. On the other hand, there was a significant correlation (r ² = 0.532, p < 0.001) between the N₂O flux and redox potential that mainly corresponded to water levels and HLRs, suggesting anoxic or aerobic conditions stimulate N₂O emission by enhancing the nitrification (nitrification–denitrification) process. In contrast, NH₃ volatilization had a high flux in the anaerobic condition mainly because of flooding. Based on the experimental results, it is hypothesized a nonflooded condition with higher water table level (Eh range of ?160 to +260 mV) would be suitable to reduce N₂O emission and NH₃ volatilization peak value by at least half while maintaining relatively efficient nitrogen removal performance.     

Rapid estimation of microbial biomass in acid red soils with and without substrate incorporation

Purpose

A rapid and alternative measurement of microbial biomass in acid red soils with and without substrate incorporation is proposed for soil quality evaluation.

Materials and methods

Soil microbial biomass C (SMBC) and N (SMBN) in 24 typical red soil samples developed from two parent materials (granite and arenaceous shale) were measured using fumigation-extraction followed by dry combustion method in comparison with ultraviolet (UV) spectrophotometry (increase in absorbance at 280 nm, ΔUV₂₈₀). The reliability of microbial biomass estimation by UV spectrophotometry was verified using six representative red soils amended with biochar (0, 1, 3 and 5%) and glucose (0, 100, 500 and 1000 mg kg^?1) separately.

Results and discussion

ΔUV₂₈₀ was strongly correlated with SMBC and SMBN measured by dry combustion, regardless of biochar/glucose incorporation. Validated conversion equations from unamended soil data were dependent on confounding effects of organic C and particle size and can be described as follows: SMBC?=?27.08?×?ΔUV₂₈₀ (R²?=?0.67, n?=?24) and SMBN?=?3.62?×?ΔUV₂₈₀ (R²?=?0.69, n?=?24). Regression models for rapid estimation of microbial biomass in red soils from different parent materials had to be calibrated separately in case of amendments. In most cases, SMBC (R² of 0.75–0.76 and root mean square error (RMSE) of 22.2–29.3 mg kg^?1) and SMBN (R² of 0.74–0.80 and RMSE of 2.60–14.2 mg kg^?1) can be predicted from ΔUV₂₈₀ in biochar/glucose-amended soils using these equations. The slope of the regression of SMBC against ΔUV₂₈₀ shifted in biochar-amended granite soils, mainly due to uncoordinated changes of SMBC in response to the difference in parent material-induced nutrient availability, while shifts of SMBC (or SMBN) against ΔUV₂₈₀ in glucose-amended arenaceous shale soils were attributed to particle size distribution.

Conclusions

Soil microbial biomass (SMBC and SMBN) in red soils can be rapidly predicted by fumigation-extraction with UV spectrophotometry detection and corresponding correction of calibration curves, depending on soil nutrient availability, particle size distribution and organic C levels.

     

Tillage system affects fertilizer-induced nitrous oxide emissions

Since the development of effective N₂O mitigation options is a key challenge for future agricultural practice, we studied the interactive effect of tillage systems on fertilizer-derived N₂O emissions and the abundance of microbial communities involved in N₂O production and reduction. Soil samples from 0–10 cm and 10–20 cm depth of reduced tillage and ploughed plots were incubated with dairy slurry (SL) and manure compost (MC) in comparison with calcium ammonium nitrate (CAN) and an unfertilized control (ZERO) for 42 days. N₂O and CO₂ fluxes, ammonium, nitrate, dissolved organic C, and functional gene abundances (16S rRNA gene, nirK, nirS, nosZ, bacterial and archaeal amoA) were regularly monitored. Averaged across all soil samples, N₂O emissions decreased in the order CAN and SL (CAN?=?748.8?±?206.3, SL?=?489.4?±?107.2 μg kg^?1) followed by MC (284.2?±?67.3 μg kg^?1) and ZERO (29.1?±?5.9 μg kg^?1). Highest cumulative N₂O emissions were found in 10–20 cm of the reduced tilled soil in CAN and SL. N₂O fluxes were assigned to ammonium as source in CAN and SL and correlated positively to bacterial amoA abundances. Additionally, nosZ abundances correlated negatively to N₂O fluxes in the organic fertilizer treatments. Soils showed a gradient in soil organic C, 16S rRNA, nirK, and nosZ with greater amounts in the 0–10 than 10–20 cm layer. Abundances of bacterial and archaeal amoA were higher in reduced tilled soil compared to ploughed soils. The study highlights that tillage system induced biophysicochemical stratification impacts net N₂O emissions within the soil profile according to N and C species added during fertilization.     

Effects of Residual Mulch Film on the Growth and Fruit Quality of Tomato (<Emphasis Type="Italic">Lycopersicon esculentum</Emphasis> Mill.)

The quantities of residual mulch film in the soil will further increase with the wide application of agricultural plastic mulch film, and the pollution of residual mulch film, which is a continuous pollutant and the one that is difficult to degrade, is a major limiting factor for the sustainable development of agriculture in China. Residual mulch film in the soil inevitably affects soil hydrodynamic parameters, destroys the homogeneity of the soil texture, seriously impedes the movement of soil water and solutes, and thus greatly influences crop growth and fruit quality. To unravel the effects of residual mulch film on tomato growth and fruit quality, pot experiments in the greenhouse were carried out in 2015 and 2016 in Northwest China. Six levels of residual mulch film were applied: 0 kg ha^?1 (CK), 80 kg ha^?1 (T1), 160 kg ha^?1 (T2), 320 kg ha^?1 (T3), 640 kg ha^?1 (T4), and 1280 kg ha^?1 (T5). Plant height, stem diameter, dry biomass, yield, root length, root surface area, fruit shape index (FSI), soluble sugar content (SSC), organic acid (OA), vitamin C (VC), lycopene, and nitrate content (NC) were measured. Plant height, stem diameter, dry biomass, and yield of tomato had a downward trend as the residual mulch film amount increased. Root length and root surface area were significantly decreased with an increasing amount of residual mulch film, but root volume and root diameter showed an inconspicuous decrease. When the amount of residual mulch film was more than 80 kg ha^?1, growth indexes, dry biomass, and yield of tomato showed a sharp decline. FSI, OA, and lycopene decreased as the residual mulch film amount increased, whereas SSC, VC, and NC showed an increase trend. With the increase in residual mulch film amount, the F and membership function values (X _μ ) all showed a declining trend in comparison to the CK. Therefore, residual mulch film can aggravate the negative effects on the comprehensive fruit quality of tomato.     

Reaeration Coefficient Estimate: New Parameter for Predictive Equations

The reaeration coefficient (K _a) is an essential parameter to predict the dissolved-oxygen concentration in different aquatic ecosystems. The techniques applied to K _a estimates require considerable efforts, since measuring this coefficient is a laborious and expensive task. Thus, the use of predictive equations wherein K _a is found through hydraulic flow parameters is common. However, the available prediction equations lead to estimates often different from each other. A new predictive equation is addressed in the present study. The insertion of a dimensionless number resulting from the relation between the RMS (Root Mean Square) of the free-surface vertical velocity and the surface flow velocity is the great innovation of the study. The reaeration experiments and the surface vertical velocity mapping were performed in a circular hydraulic channel. The flow velocity varied from 0.25 to 0.64 m s^?1, and depth varied from 0.09 to 0.15 m. The new equation led to more accurate results than the equations based on traditional hydraulic parameters such as the Reynolds and Froude numbers, mainly when it comes to K _a values higher than 40 day^?1. The sensitivity analysis has shown that the new dimensionless number is the most sensitive parameter of the herein proposed predictive equation and that the influence from the Reynolds and Froude numbers on K _a weakens as turbulence gets more intense.     

Potential of Pyrene Removal from Urban Environments by the Activities of Bacteria and Biosurfactant on Ornamental Plant Leaves

Pyrene is a dominant PAH in urban environments. It can combine with airborne particulates and accumulate on plant leaves. To investigate pyrene’s biodegradation potential, this study initially monitored the abundance of airborne and phyllosphere bacteria. The number of airborne pyrene-degrading bacteria ranged from 22 to 152 CFU m^?3 air, and more bacteria were found in the proximity of the ornamental plant swath than along the roadside. Pyrene-degrading bacteria averaged 5 × 10⁴ CFU g^?1 on the leaves of all tested plant species and accounted for approximately 7% of the total population. Four pyrene-degrading bacteria were isolated from I. coccinea to use as model phyllosphere bacteria. To increase the bioavailability of pyrene, a lipopeptide biosurfactant was applied. Kocuria sp. IC3 showed the highest pyrene degradation in the medium containing biosurfactant. The removal of deposited pyrene at 30 μg g^?1 leaf was monitored in a glass chamber containing I. coccinea twigs. After 14 days, leaves containing both Kocuria sp. IC3 and 0.1× CMC biosurfactant showed 100% pyrene removal with the most abundant bacteria. The system with biosurfactant alone also enhanced the activities of phyllosphere bacteria with 94% pyrene removal. Consequently, the bioremediation of deposited pyrene could be achieved by spraying biosurfactant on ornamental shrubs.     

Extraction and speciation analysis of roxarsone and its metabolites from soils with different physicochemical properties

Purpose

The application of roxarsone (ROX), an arsenic-containing compound, as a feed additive in the animal production industry results in elevated soil levels of ROX and its metabolites, namely, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenate (As(V)), and arsenite (As(III)). This study was conducted to study the extraction and speciation analysis of ROX-related arsenicals in soils with different physicochemical properties and the possible effects of soil properties on the extraction of ROX and its metabolites.

Materials and methods

Analytical method based on high-performance liquid chromatography (HPLC)-inductively coupled plasma–mass spectrometry (ICP-MS) was employed to determine the concentrations of As(III), DMA, MMA, As(V), and ROX extracted by different extraction solvents from different soils spiked by arsenicals. Validity of the developed method was assessed by the recovery efficiencies of arsenic species in soil-dissolved matter solutions containing 20 μg As?·?L^?1 of each arsenic species. Effects of soil properties on the extraction of ROX and its metabolites were analyzed by Pearson’s correlation.

Results and discussion

Arsenic species were separated using gradient elution of water and 20 mmol?·?L^?1 (NH₄)₂HPO₄ + 20 mmol?·?L^?1 NH₄NO₃ + 5 % methanol (v/v) within 27 min. The linear ranges of all arsenicals were 0–200 μg As?·?L^?1 with R ²?>?0.9996. The developed method provided lower limits of detection for As(III), DMA, MMA, As(V), and ROX (0.80, 0.58, 0.35, 0.24, and 1.52 μg As?·?L^?1, respectively) and excellent recoveries (92.52–102.2 %) for all five species. Arsenic speciation was not altered by 0.1 mol?·?L^?1 NaH₂PO₄ + 0.1 mol?·?L^?1 H₃PO₄ (9:1, v/v), which offered better average extraction efficiencies for As(III), As(V), DMA, MMA, and ROX (32.49, 92.50, 78.24, 77.64, and 84.54 %, respectively). Extraction performance of arsenicals was influenced by soil properties, including pH, cation exchange capacity (CEC), total Fe, and amorphous Fe.

Conclusions

ROX and its metabolites from soils could be satisfactorily separated by the developed method for the studied arsenicals. To extract arsenic species from soils, 0.1 mol?·?L^?1 NaH₂PO₄ + 0.1 mol?·?L^?1 H₃PO₄ (9:1, v/v) was recommended. Extraction efficiencies of arsenicals were influenced more by solvent composition than soil physicochemical properties. The present study provides a valuable tool and useful information for determining the concentrations of ROX and its metabolites in contaminated soils.

     

Stimulation of methane oxidation by CH<Subscript>4</Subscript>-emitting rose chafer larvae in well-aerated grassland soil

In this study, the impact of rose chafer (Cetonia aurata L.) larvae on net and gross methane (CH₄) fluxes in soil from an old permanent grassland site (Giessen, Germany) was investigated. Previous studies at this site suggested the existence of Scarabaeidae larvae-induced “CH₄-emitting hot spots” within the soil profile which may subsequently lead to increased CH₄ oxidation. The net (soil + larvae) and gross (soil and larvae separated) CH₄ fluxes were studied in a 3-month laboratory incubation. Addition of larvae changed the soil from a net sink (?330 ± 11 ng CH₄ kg^?1 h^?1) to a net source (637 ± 205 ng CH₄ kg^?1 h^?1). Supply of plant litter to the soil + larvae incubation jars tended to increase CH₄ emissions which was not significant due to large variability. After 11–13 weeks of incubation, the net soil CH₄ oxidation was significantly stimulated by 13–21% in the treatments containing larvae when these were taken out. Analysis of archaeal 16S rRNA genes revealed that the majority of the obtained clones were closely related to uncultured methanogens from guts of insects and other animals. Other sequences were relative to cultivated species of Methanobrevibacter, Methanoculleus, and Methanosarcina. Hence, Scarabaeidae larvae in soils (i) may represent an underestimated source of CH₄ emissions in aerobic upland soils, (ii) may stimulate gross CH₄ consumption in their direct soil environment, and, thus, (iii) contribute to the spatial heterogeneity often observed in the field with closed-chamber measurements. Long-term CH₄-flux balances may be wrongly assessed when “exceptional” net CH₄ flux rates (due to larvae hot spots) are excluded from data sets.     

Evidence for nitrification ability controlling nitrogen use efficiency and N losses via denitrification in paddy soils

For understanding the effects of nitrification ability on nitrogen (N) use efficiency and N losses via denitrification in paddy soils under flooding conditions, six paddy soils with different nitrification activities were sampled from various sites of China and a pot experiment was conducted. Rice plants at tillering stage were transplanted into pots and harvested 7.5 days after transplanting, ¹⁵N-(NH₄)₂SO₄ was applied 2.5 days after rice transplanting under continuously flooding conditions. The N losses by denitrification were determined by the unrecovered ¹⁵N applied as ¹⁵NH₄ ⁺ and the N use efficiency (NUE) was calculated by ¹⁵N taken up by rice plants. Plant height (from 33.8 to 37.3 cm) and biomass (from 1.07 g pot^?1 to 1.52 g pot^?1) increased significantly with the native NH₄ ⁺ concentration in the studied soils (P < 0.01). The NUE decreased, whereas the N losses via denitrification increased due to the increase in the nitrification rate of soils determined at 60% water holding capacity (P < 0.05). The results implied that the nitrification activity of paddy soils is a key factor in controlling NUE and N losses via denitrification.