Liquid chromatographic determination of coumarin anticoagulants in tablets

A simple and rapid liquid chromatographic method is described for the qualitative and quantitative determination of 5 coumarin anticoagulants in tablet composites and individual tablets. Analyses are carried out on a C18 reverse phase column using tetrahydrofuran-methanol-water-acetic acid (35 + 10 + 65 + 0.1) as mobile phase and photometric detection at 311 nm. The coefficients of variation for 10 consecutive injections of a mixed standards solution ranged from 0.28% for ethyl biscoumacetate to 0.78% for acenocoumarol. Standard recoveries were as follows: acenocoumarol, 99.3%; dicumarol, 99.6%; phenprocoumon, 101.6%; and warfarin sodium, 99.0%. The method was linear between 2 and 8 micrograms of drug injected. Assay results agreed favorably with those of the USP XX methods for dicumarol, phenprocoumon, and warfarin, and the NF XIV method for acenocoumarol. In addition, close correspondence was found with the results previously reported for the same drugs by a semiautomated spectrophotometric method. The content uniformity testing of individual 50 mg dicumarol tablets and 5 mg warfarin sodium tablets by the proposed method gave average (SD) values of 100.32% (0.64) and 101.00% (0.14), respectively, whereas these values were 101.60% (1.81) and 101.80% (0.18), respectively, by the method of USP XX.     

Liquid chromatographic determination of medroxyprogesterone acetate in tablets

A reverse-phase liquid chromatographic method is described for the assay of medroxyprogesterone acetate in tablets. An octadecylsilane (C18) column with a mobile phase of methanol-0.01M dibasic ammonium phosphate (80 + 20 v/v, pH 7.2 +/- 0.1) and photometric detection at 254 nm separates medroxyprogesterone acetate from excipients. Detector responses were linear to concentrations of medroxyprogesterone acetate over the range 50-150 micrograms/mL (r = 0.999). Mean recovery of medroxyprogesterone acetate added to tablet excipients was 100.8%. Mean assay results were 101.3% (n = 3). The assay results are comparable to those obtained by the compendial liquid chromatographic method.     

Liquid chromatographic determination of sulfasalazine in tablets and bulk powder

A liquid chromatographic method has been developed that determines the amount of sulfasalazine in tablets and bulk powder in the presence of residual synthesis by-products and excipients. The method was tested on crude product containing large amounts of impurities. A C-18 reverse phase column with water-acetonitrile-acetic acid mobile phase was found to effectively separate the drug on the column. Six different commercial samples of 500 mg tablets were assayed. The results varied from 92.6 to 101.8% of the declared amount. Spectrophotometric determinations, which do not discriminate between the drug and impurities, gave 95.4-101.8% of declared. One commercial sample of bulk powder was assayed.     

Liquid chromatographic determination of primidone in tablets: collaborative study

Six laboratories collaboratively studied a liquid chromatographic (LC) method for the quantitative determination of primidone in tablets. Two lots each of commercially prepared 50 and 250 mg tablets and 2 authentic mixtures, at 50 and 250 mg levels, were sent to each collaborator. Samples were dissolved in the mobile phase, filtered, and injected into the chromatograph. Average recoveries for the 8 samples ranged from 97.5 to 101.2%, and coefficients of variation ranged from 0.53 to 3.01%. The LC method has been adopted interim official first action.     

Liquid chromatographic determination of diazepam in tablets: collaborative study

A stability indicating liquid chromatographic method for the determination of diazepam in tablets was collaboratively studied by 6 laboratories. The method uses a C18 reverse phase column, a methanol-water mobile phase, p-tolualdehyde as the internal standard, and photometric detection at 254 nm. The collaborators were supplied with a synthetic tablet powder and 3 commercial tablet samples. The mean recovery of diazepam from the synthetic tablet powder was 100.2%. For all samples analyzed, the coefficient of variation was less than 1.5%. The method has been adopted official first action.     

Liquid chromatographic determination of acetaminophen in tablets: collaborative study

A reverse phase liquid chromatographic method previously reported for the determination of acetaminophen in tablets was collaboratively studied by 5 laboratories. Each collaborator received duplicate samples of a synthetic tablet formulation and 3 powdered commercial tablet composites. The composites represented single-component and multi-component proprietary products and a single-component generic product. The pooled repeatability (CVDo) and reproducibility (CVDx) values for the proprietary tablets were 0.89 and 1.34%, respectively. For the generic tablets, these values were 0.66 and 0.74%, respectively. The pooled recovery value for acetaminophen added to the synthetic formulation was 98.9 +/- 0.7% (n = 10) with a CV of 0.75%, CVDo of 0.37%, and CVDx of 0.78%. The overall repeatability of the method was 0.64%, and the overall reproducibility was 0.95%. The method has been adopted official first action.     

Liquid chromatographic determination of coumarin anticoagulants in tablets: collaborative study

A liquid chromatographic method for the determination of coumarin anticoagulants in tablets was collaboratively studied by 7 laboratories. The method uses an octadecylsilane-bonded microparticulate column, tetrahydrofuran-methanol-water-acetic acid mobile phase, and photometric detection at 311 nm. Each collaborator received samples of warfarin sodium, phenprocoumon, and dicumarol as a synthetic composite and as commercial individual and composited tablets. Pooled average assay values for synthetic and commercial tablet samples of warfarin sodium were 101.6 and 99.5%, respectively, with a combined reproducibility SD of 2.38% (CV = 2.37%) and combined repeatability SD of 1.49% (CV = 1.49%). Pooled average (SD) assay values for dicumarol and phenprocoumon commercial samples were 98.0 (2.27) and 101.3% (4.00), respectively. The content uniformity determinations of 2 mg warfarin sodium and 25 mg dicumarol tablets indicated average tablet contents (range) of 99.5% (91.0-116.0) and 98.0% (89.8-108.8), respectively. The method has been approved interim official first action.     

Liquid chromatographic methods for assay of carbamazepine, 10,11-dihydrocarbamazepine, and related compounds in carbamazepine drug substance and tablets

Liquid chromatographic (LC) methods have been developed for the determination of carbamazepine, the impurity 10,11-dihydrocarbamazepine, and related compounds in carbamazepine drug substance and tablets. The LC methods specify a 5 micron diol column and a mobile phase of acetonitrile-methanol-0.05% aqueous acetic acid (5 + 5 + 90). Iminodibenzyl and iminostilbene, starting materials for some routes of synthesis, elute late in the LC system; therefore, a thin-layer chromatographic method for their detection at the 0.05% level has been developed. Eight tablet and 13 raw material samples from several sources were examined. The impurities most frequently found were 10, 11-dihydrocarbamazepine and a compound identified as 10-bromocarbamazepine at levels up to 1.3 and 0.5%, respectively; minimum detectable amounts were about 0.01 and 0.03%, respectively.     

Liquid chromatographic determination of penicillin V potassium in tablets: collaborative study

A liquid chromatographic method for the determination of penicillin V potassium in tablets was collaboratively studied by 7 laboratories. The method uses an octadecyl silane reverse-phase column, a mobile phase of acetonitrile-methanol-0.01 M potassium phosphate monobasic (21 + 4 + 75 v/v/v), photometric detection at 225 nm, and sulfadimethoxine as an internal standard. Each collaborator received 6 samples: powdered composites of 2 commercial tablet preparations and 1 synthetic tablet powder mixture, each with blind duplicates. The mean repeatability and reproducibility relative standard deviations for commercial samples were, respectively, 1.10 and 1.46% (250 mg dosage), and 0.84 and 2.82% (500 mg dosage). The average standard recovery from the synthetic formulation was 99.1%, with repeatability and reproducibility relative standard deviations of 1.30 and 3.66%, respectively. The method has been adopted official first action.     

Liquid chromatographic determination of prednisolone in tablets and bulk drugs: interlaboratory study

A normal phase liquid chromatographic (LC) method for the determination of prednisolone in tablets and bulk drugs was studied by 7 analysts. An LC system, consisting of a methanol-water-ethylene dichloride-acetic acid mobile phase and a silica column, was used to analyze bulk drugs, individual tablets, and composite samples. Analysts were supplied with 16 samples, including simulated formulations, composites of commercial tablets, intact tablets, and bulk drug substances. Results agreed with those obtained by the author. The coefficients of variation of the analysts' results ranged from 1.34% for bulk drugs to 2.14% for tablet composites. The LC method is suggested as an alternative to the official AOAC and USP XX blue tetrazolium colorimetric methods.     

Liquid chromatographic determination of methyldopa and methyldopa-thiazide combinations in tablets: collaborative study

A reverse phase liquid chromatographic method for the determination of methyldopa, methyldopa-hydrochlorothiazide, and methyldopachlorothiazide in tablets was collaboratively studied by 8 laboratories. Each collaborator received 20 samples that included drug substance, synthetic and commercial tablet compositions. The overall repeatability and reproducibility standard deviations for commercial tablets were 1.11 and 1.75% for methyldopa, 0.96 and 1.62% for chlorothiazide, and 1.21 and 2.15% for hydrochlorothiazide, respectively. The overall recoveries of methyldopa, chlorothiazide, and hydrochlorothiazide added to synthetic tablets were 100.78, 100.70, and 101.34%, respectively. The method has been adopted official first action.     

Liquid chromatographic determination of penicillin V potassium in tablets and powders for oral solution

A reverse-phase liquid chromatographic method is described for the assay of penicillin V potassium in tablets and powders for oral solution. Under isocratic conditions, the combined use of an octadecylsilane column, with a mobile phase composed of acetonitrile-methanol-0.01M monobasic potassium phosphate (21 + 4 + 75, v/v), and photometric detection at 225 nm, separated penicillin V potassium from excipients, related compounds, and degradation products. Sulfadimethoxine was used as an internal standard. Detector responses were linearly related to concentrations of penicillin V over the range 25-225 micrograms/mL (r = 0.99997). Standard addition recoveries ranged from 98.8 to 99.9% (mean 99.5%, n = 8) for tablets and from 97.9 to 101.6% (mean 99.8%, n = 8) for powders for oral solution. The liquid chromatographic assay results were compared with those obtained by the official iodometric titration method. The proposed method is simple, selective, stability-indicating, and free from interference by excipients and degradation products.     

Liquid chromatographic determination of melamine in beverages

A liquid chromatographic method is described for the determination of melamine in beverages. Melamine is separated by column chromatography using cation and anion exchange resin and determined by ion-pair liquid chromatography using an ODS column and a mixture of acetonitrile and 0.05M phosphate buffer (pH 3.0) containing 0.005M sodium 1-laurylsulfate (1 + 4, v/v) as mobile phase. Recoveries of melamine ranged between 90.3 +/- 7.8 and 102.1 +/- 5.6% at levels of 0.6 to 2.4 ppm in 4 kinds of beverages. The quantitation limit was 2.5 micrograms melamine in 50 mL beverage. The method was applied to the migration test of melamine from melamine-formaldehyde resin products to the beverages.     

Liquid chromatographic determination of sulfamethazine in feeds

A reverse-phase liquid chromatographic method for the assay of sulfamethazine (SMZ) in feeds is described. Feed samples are extracted with 50% methanol solution, centrifuged, filtered, and diluted when necessary, and chromatographed on a C-18 column. Samples are eluted with a mobile phase of 20% methanol and 80% of a solution containing acetic acid and tetramethylammonium chloride. The average recovery from spiked samples was 97.2% with a coefficient of variation of 1.2%. Linearity was very good (correlation coefficient 0.9997). Within-day and between-day coefficients of variation averaged 1.3 and 2.6%, respectively. The results for samples assayed by this method compared closely with the results from the same extracts assayed by the AOAC colorimetric method.     

Liquid chromatographic determination of sulfamethazine in milk

A simple, relatively rapid liquid chromatographic method has been developed for the determination of sulfamethazine (SMZ) in milk at levels in the low ppb range. The method is based on extracting SMZ from milk with chloroform, evaporating the chloroform, dissolving the residues in hexane, extracting into buffers, and chromatographing the buffer solution. The method has been shown to determine levels as low as 5 ppb reliably. Levels greater than or equal to 7 ppb have been confirmed by gas chromatography/mass spectrometry after derivatization of extracts from fortified, incurred, and shelf milk. Intralaboratory recoveries and percent coefficients of variation are satisfactory. Sulfadimethoxine and sulfaquinoxaline can also be determined by the method. Application of the method to other dairy products is being investigated.     

Liquid chromatographic determination of flucytosine in capsules

A liquid chromatographic method has been developed for determination of flucytosine in capsules. Flucytosine and p-aminobenzoic acid, the internal standard, are separated on a C18 reverse phase column using water-methanol-acetic acid mobile phase containing 1-octane-sulfonic acid sodium salt. Compounds are detected photometrically at 285 nm. Mean assay results for 250 and 500 mg commercial capsules were 101.5% (n = 5) of declared, respectively. Mean recovery of flucytosine added to commercial capsules was 99.3%.     

Liquid chromatographic determination of nicarbazin in feed

A liquid chromatographic method was developed for the determination of nicarbazin (4,4'-dinitrocarbanilide.2-hydroxy-4,6-dimethylpyrimidine) in chicken feed. Ground feed was extracted with hot dimethylformamide, filtered, and then cleaned up on an alumina column. The nicarbazin was eluted from the column with ethanol and quantitated using a reverse phase C-18 column, with a methanol-water mobile phase and ultraviolet detection at 344 nm. Recoveries at a typical use level of 100 micrograms/g feed averaged 98% with a standard deviation of 3%. Samples fortified at levels as low as 0.1 micrograms/g were analyzed with 92% recovery. The detection limit is 1 ng, and the response is linear between 4 and 1000 ng. Feed additives in combination with nicarbazin do not interfere with recovery.     

Liquid chromatographic determination of strychnine in stomach contents

A chloroform extract of stomach contents at basic pH is concentrated and then extracted with 0.1 M phosphoric acid. The acid extract is chromatographed on a 10 cm reverse phase column, using 0.005 M phosphate buffer (pH 3.0)-acetonitrile-tetrahydrofuran (750 + 135 + 115) containing 0.01 M octanesulfonic acid at a flow rate of 1.0 mL/min for elution. Strychnine eluted in 7.3 min. Recoveries from spiked stomach contents averaged 92%. The method can be used without modification for other alkaloids.     

Liquid chromatographic determination of narasin in feed premixes

A liquid chromatographic (LC) method has been developed to determine narasin in feed premixes. Narasin is extracted from the premix with a methanol-water solvent, and the extracted solution is assayed by using LC. Recovery of narasin from a 12.5 g/lb premix is quantitative (100%), with a relative standard deviation of 1.44%. The results correlated well (coefficient 0.92) with a turbimetric bioassay method.     

Liquid chromatographic determination of cholecalciferol in rodent baits

Cholecalciferol (vitamin D3) is extracted in acetonitrile on a Goldfisch apparatus, diluted to volume, and determined by reverse phase liquid chromatography (LC). The sum of the peak heights of pre-vitamin D3 and cis-vitamin D3 is used for quantitation. The method was tested for precision, linearity, and recovery. Quadruplicate analyses of 5 formulation samples gave relative standard deviations of 1.56-2.65%. Linearity was excellent with regression and correlation coefficients of 0.9997 and 0.9998, respectively. Recovery was 98.0 +/- 2.7%. The method is applicable to 0.075% cholecalciferol rodent baits.