Tree species diversity and dominance in a man-made forest on sodic wasteland of North India

The study was conducted with the objective of studying tree species diversity and dominance and the associated changes in soil characteristics in a man-made forest established on formerly barren sodic land at Banthra Research Station (National Botanical Research Institute, Lucknow, India) (80° 45–53E, 26° 40–45N) over three decades. The results revealed that the forest has a moderate value for the tree species diversity index (H). The tree species Derris indica, Dalbergia sissoo, Azadirachta indica, Cassia siamea, Terminalia arjuna, Syzygium cumini, and Tectona grandis were found to be the major dominant species which may be considered suitable for planting on such degraded wastelands. There was a perceptible reduction in soil pH and exchangeable sodium percentage (ESP) and an increase in organic C and Ca²⁺+Mg²⁺ cation contents over the past three decades, indicating that the sodicity has declined in the surface soil.     

Preservative treatment of wood-based composites with 3-iodo-2-propynyl butylcarbamate using supercritical carbon dioxide impregnation

Five structural-use wood-based composites [medium density fiberboard (MDF), hardwood plywood, softwood plywood, particleboard, oriented strand board (OSB)] were treated with 3-iodo-2-propynyl butylcarbamate (IPBC) using supercritical carbon dioxide (SC-CO₂) as a carrier solvent. Treatment was conducted at 35°C/7.85MPa (80kgf/cm²), 35°C/9.81MPa (100kgf/cm²), 35°C/11.77MPa (120kgf/cm²), 45°C/7.85MPa, 45°C/9.81MPa, 45°C/11.77MPa, 55°C/7.85MPa, 55°C/9.81MPa, and 55°C/11.77MPa. A decay test was carried out in the laboratory according to the modified Japanese standard method in which untreated and treated specimens were exposed for 12 weeks to a monoculture of the white-rot fungus Trametes versicolor (L.: Fr.) Pilat or the brown-rot fungus Fomitopsis palustris (Berk. et Curt.) Gilbn. and Ryv. IPBC/SC-CO₂ treatment protected the treated materials from decay by the two fungi, although the relative efficiency against decay varied with the treatment conditions and the type of wood-based composite. Better performance for MDF, hardwood plywood, and particleboard was generally obtained at high temperatures and pressures, whereas softwood plywood and OSB were most protected at low temperatures under any of the pressure levels tested.Part of this work was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002     

In vitro propagation of <Emphasis Type="Italic">Oroxylum indicum</Emphasis> Vent. a medicinally important forest tree

In vitro propagation of Oroxylum indicum Vent. was carried out using cotyledonary node explants. Among the different types of cytokinins used for culture establishment, 6-benzyladenine exhibited the best response with higher concentrations (8.87µM or above) for inducing multiple shoots. Inclusion of indole-3-acetic acid (2.85µM) into 6-benzyladenine-supplemented medium triggered a high frequency of response as well as a proliferation of shoots. The best medium for proliferation was Murashige-Skoog (MS) medium with 6-benzyladenine (8.87µM) and indole-3-acetic acid (2.85µM). However, incorporation of gibberellic acid (1.44µM) was mandatory to enhance shoot elongation. Repeated subculturing of cotyledonary node and in vitro developed nodal segments in MS medium with 6-benzyladenine (4.44µM) at 4-week intervals resulted in continuous mass multiplication of shoots without any evidence of decline. Root induction was best (91.6%) when MS strength was reduced to one-quarter and combined with -naphthalene acetic acid (2.69µM) and indole-3-acetic acid (5.71µM), with a high survival rate (70–72%) of plantlets hardened in either soil rite or soil:sand:soil rite (1:1:2).     

Provenance variation in growth characters of four subtropical pine species planted in Mexico

In 1995 a species/provenance test was established in the state of Puebla, Mexico to assess and compare the growth of Pinus greggii var. australis, P. maximinoi, P. patula and P. tecunumanii, including 10, 5, 11 and 4 provenances of each species, respectively. Each provenance test lot consisted of seed from 7 to 10 individual trees collected in natural stands. Range-wide samples were included in the test for P. greggii var. australis and P. patula. Material of P. maximinoi and P. tecunumanii from Guatemala, Honduras and Nicaragua, as well as Mexico was established in the test. The test site is in a mountainous area at 1440m elevation, near 20°N latitude. At 5 years of age significant differences were seen at both the species and provenance levels in survival, total height, diameter and volume. The overall test survival was 93%. Variance among species was three time greater than among provenances, comprising 25–33% of the total variation. P. maximinoi had the greatest height, diameter and volume (62dm³) followed by P. tecunumanii (53dm³). P. greggii var. australis had an average volume of 43dm³ and P. patula produced 30dm³. Although P. maximinoi had the lowest survival rate, the San Jeronimo provenance was the most productive of all 30 provenances tested; 98% survival and 73dm³ volume. This was equivalent to 2.8cm annual diameter increment and 2m in height growth per year. Significant growth differences among provenances within species indicate that potential gain exists using provenance selection.     

Estimating individual tree heights of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR

Recently, it was shown that individual tree heights could be accurately estimated using small-footprint airborne light detection and ranging (LiDAR) remote sensing. Because most of the areas studied previously were limited to flat terrain, we investigated the accuracy of LiDAR-derived individual tree height estimates for different types of topographical features in mountainous forests with a steeper and more complex topography. Several middle-aged (40–50 years old) sugi (Cryptomeria japonica D. Don) plantations are found in the mountainous regions in Japan; hence, we chose 48-year-old sugi plantations to investigate the accuracy of these estimates. The surveyed area was divided into three types of topographical features; steep slope (mean slope ± SD; 37.6° ± 5.8°), gentle slope (15.6° ± 3.7°), and gentle yet rough terrain (16.8° ± 7.8°). Before estimating tree heights, the number of detected trees within each topographical feature was researched. In each of these terrains, the percentage of trees detected correctly was 74%, 86%, and 92%; the average error between LiDAR-derived and field-measured tree heights was 0.227m, –0.473m, and –0.183m; and the accuracy of the LiDAR-derived tree height estimates, given as root mean square error (RMSE), was 0.901m, 0.846m, and 0.576m, respectively. Consequently, the procedure presented in this study could detect most canopy trees and estimate individual tree heights with an accuracy better than 1m, even in a forest with a mean slope angle of approximately 38°; thus, indicating that small-footprint airborne LiDAR will be a useful tool for accurately estimating the heights of individual canopy trees in sugi plantations in mountainous areas.     

Effects of a nursery CO2 enriched atmosphere on the germination and seedling morphology of two Mediterranean oaks with contrasting leaf habit

The use of an enriched CO₂ atmosphere in tree nurseries has been envisaged as a promising technique to increase productivity and to obtain seedlings with a higher root/shoot ratio, an essential trait to respond to water stress in Mediterranean-type ecosystems. In that framework, we have analyzed the effects of three levels of atmospheric CO₂ concentration (350, 500 and 700ppm) on the germination rate, growth and morphology of seedlings of two Mediterranean oaks used in reforestation programs: the evergreen Quercus ilex L. and the deciduous Quercus cerrioides Wilk. et Costa. CO₂ enrichment increased the germination rate of Q. cerrioides (from 70±7 to 81±3%) while it decreased that of Q. ilex (from 71±10 to 41±12%). Seedlings of both species increased approximately 60% their total biomass in response to CO₂ enrichment but at two different CO₂ concentrations: 500ppm for Q. cerrioides and 700ppm for Q. ilex. This increase in seedlings biomass was entirely due to an augmentation of root biomass. Considering germination and biomass partitioning, an enriched CO₂ atmosphere might not be appropriate for growing Mediterranean evergreen oaks, such as Q. ilex, since it reduces acorn germination and the only gains in root biomass occur at a high concentration (700ppm). On the other hand, a moderate CO₂ enrichment (500ppm) appears as a promising nursery technique to stimulate the germination, growth and root/shoot ratio of deciduous oaks, such as Q. cerrioides.     

Effect of auxins (IBA and NAA) and season on rooting of juvenile and mature hardwood cuttings of Robinia pseudoacacia and Grewia optiva

Juvenile (2 year old trees) and mature hardwood (15 year old trees) cuttings of Robinia pseudoacacia and Grewia optiva were tested for their capacity to form roots. Cuttings were prepared in spring, monsoon and winter seasons and treated with different concentrations (250, 500 and 750 mg/l) of IBA and NAA. These were planted in a mist chamber maintained at 25±1°C with relative humidity >70%. Juvenile cuttings of both species rooted significantly better than mature hardwood cuttings in all three seasons, and the age effect was more pronounced in auxin treated cuttings. The highest rooting in juvenile (83.3%) and mature (66.6%) cuttings was observed with the NAA (500 mg/l) treatment in R. pseudoacacia during the spring season. In G. optiva, IBA (250 mg/l) in the monsoon season was most effective and yielding a maximum of 80% and 70% rooting in juvenile and mature cuttings, respectively. Auxin treatments also significantly enhanced the number of roots, root length, leaf number and leaf area. Statistical analysis of data revealed that interactions between age, season and treatments were significant at P <0.05 level for R. pseudoacacia and non-significant for G. optiva.     

Germination and storage characteristics of Prunus africana seeds

Prunus africana, from the moist highlands of sub-Saharan Africa, is subject to great exploitation because its bark is used in the treatment of prostate-related diseases. A better understanding of the biology of its seed could help the ex situ and in situ conservation of the species. Fifty per cent of fresh seeds (46.8% MC) from mature purple fruits harvested in Kenya germinated after 10 days incubation at 25°C. The germination rate was linearly related to constant temperature, giving a prediction for the minimum temperature for germination at ca. 0.6°C. All seeds germinated at 5°C during 4 months fully hydrated storage. P. africana seed is, thus, neither dormant nor chilling sensitive. The relationship between equilibrium moisture content and relative humidity was used to construct a sorption isotherm, against which seed desiccation and storage responses were assessed. Seventy six per cent of mature seeds survived drying to 4.5% MC (22% RH) compared to 17% of seeds from immature purple-green fruits. Although, 25–45% of mature seeds survived at 8–12% MC after 2 months, only 10% remained viable after 6-month storage at 5°C. This study proposes optimum conditions for the artificial regeneration of P. africana seeds and highlights the need for further experiments storing dry seeds at sub-zero temperatures.     

Biological performance of wood-based composites treated with a formulation of 3-iodo-2-propynyl butylcarbamate and silafluofen using supercritical carbon dioxide

Wood-based composites (medium density fiberboard, hardwood plywood, softwood plywood, particleboard, and oriented strand board) treated with a mixture formulation of 3-iodo-2-propynyl butylcarbamate (IPBC) and silafluofen using supercritical carbon dioxide as a carrier solvent were evaluated for their resistance to biological attack in a laboratory study. The formulation was pre-pared by mixing 10g of IPBC and 1g of silafluofen in ethanol solution (20ml). Treatments were conducted at 35°C/7.85MPa, 35°C/9.81MPa, and 55°C/11.77MPa with the direct introduction of 20ml of the formulation into the treatment vessel with a capacity of ca. 2000ml at a rate of 2ml/min. Laboratory tests indicated that the treatment conditions used significantly enhanced the resistance of the treated wood-based composites against fungal and termite attacks. Because no significant difference in efficacy against both biodegrading agents was noticed regardless of the treatment conditions, the treatment at 35°C/7.85MPa was thought to be the most economical in terms of energy consumption and performance of treated materials. However, the amount of biocides in a formulation must be carefully selected in accordance with the required treatment condition to ensure satisfactory performance of the treated wood-based composites against any biological agent.     

The applicability of a color acetate film for estimating photosynthetic photon flux density in a forest understory

The suitability of a color acetate film for estimating photosynthetic photon flux density (PPFD) in a forest understory was examined. The fading ratio of the film (F), the total PPFD (PPFD_total) to which the film was exposed, and the average daily maximum temperature during exposure (T) were obtained from measurements at multiple sampling points throughout an entire year within a natural secondary forest (n = 42). The ranges of the recorded values were as follows: F 35%–99%, PPFD_total 1.4–28.3molm^–2, and T 6°–32°C. PPFD_total was regressed by F and T with a high r ² (=0.94; P < 0.0001): PPFD_total = (100 – F)/(1.085 + 0.051T). The absolute error (|estimated PPFD_total – measured PPFD_total|) averaged 1.3molm^–2 with a maximum of 5.7molm^–2, indicating a good fit. These results indicated broad applicability of the film, both spatially and temporally, for estimating forest understory PPFD.     

Minimum distance boundary method: maximum size-density lines for unthinned <Emphasis Type="Italic">Acacia mangium</Emphasis> plantations in South Sumatra,Indonesia

A minimum-distance boundary method that will minimize the sum of distances between measured points and a fitted self-thinning lines on log–log coordinates of stand density and quadratic mean diameter was proposed in order to estimate the maximum size density line: an upper boundary of self-thinning line. The lines for A. mangium were inferred with this method using data in two areas of unthinned plantations in South Sumatra, Indonesia. Slopes of the lines were deduced as –1.63 and –1.67 within the range of 10–21cm of quadratic mean dbh. The intensity of self-thinning was examined as a rate of reduction of density in relation to dbh increment. The rates were found to be higher than the slopes in the range close to the maximum line; hence the lines inferred in this study were likely existent. Maximum basal area deduced from the size-density line was 28–30m²/ha at 12cm of dbh and then it increased up to 34–37m²/ha at 20cm of dbh.     

Electromagnetic shielding efficiency of the electric field of charcoal from six wood species

Six wood species were carbonized under various carbonization temperatures and nonoxygen conditions to obtained charcoal. The effects of wood species, rate of temperature rise, and carbonization temperature on the electromagnetic shielding efficiency (ESE) of the electric field were investigated. The wood species used in this study were Japanese cedar, China fir, western hemlock, red oak, fortune paulownia, and Taiwan acacia. Tested materials were carbonized in a high-temperature oven under the following conditions: rate of temperature rise 1°–5°C/min; carbonization temperature 500°–1100°C, with temperature intervals of 100°C; maximum temperature maintained for 1h; and flow rate of nitrogen 300ml/min. The electromagnetic insulation strength system was used to detect the ESE of the electric field of charcoal. It was found that western hemlock and fortune paulownia charcoal showed maximum ESE values of of 36 and 61dB generated at a carbonization temperature of 1000°C. The charcoals derived from four other wood species showed maximum ESE values of 28dB for Japanese cedar, 23dB for China fir, 32dB for red oak, and 38dB for Taiwan acacia, respectively, at a carbonization temperature of 1100°C. The ESE value for fortune paulownia charcoal was similar to those of metal nets. The relations between ESE and logarithmic values of resistivity (log) could be represented by a negatively exponential formula.Part of this report was presented at the 50th Annual Meeting of the Japan Wood Research Society, Kyoto, April 2000     

Antioxidant activity of extracts from <Emphasis Type="Italic">Calocedrus formosana</Emphasis> leaf,bark, and heartwood

Calocedrus formosana Florin (Cupressaceae) is an endemic tree to Taiwan. To evaluate the antioxidant activity of the plant extracts from heartwood, bark, and leaf of C. formosana, assays for 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical and superoxide anion scavenging activities, as well as prevention of DNA strand cleavage were performed in this study. Similar IC₅₀ values against the DPPH radical were found for the heartwood and bark extracts at approximately 23µg/ml. Moreover, the heartwood extract exhibited the highest inhibitory activity against superoxide radicals among the test samples; a 2.3-fold lower value of IC₅₀ for superoxide radical inhibition was found in the heartwood extract relative to that of (+)-catechin. Much less effect on inhibition of DPPH and superoxide radicals was found from the leaf extract of C. formosana. More than 70% of superoxide radicals were inhibited in the presence of 10µg/ml heartwood extract, whereas only 15% inhibition was obtained from the leaf extract. The heartwood extract, at a dose of approximately 0.5mg/ml, apparently completely prevented the X174 supercoiled DNA cleavage induced by ultraviolet photolysis of H₂O₂, as judged by agarose gel electrophoresis. This report also suggests that the antioxidant activities of the plant extracts of C. formosana are in good correlation with their phenolic contents.     

Nitrogen use by <Emphasis Type="Italic">Pinus densiflora</Emphasis> trees growing on a Mt. Fuji lava flow

To quantify the nitrogen (N) use by Pinus densiflora trees growing on an infertile lava surface, N pools, N requirement and N uptake through fine roots and N deposition from the atmosphere were estimated. The N requirement and the N uptake of fine roots were 55.5kgNha^–1year^–1 and 39.7kgNha^–1, respectively. Thus, the ratio of N uptake to N requirement of the fine roots was 71.5%. Including fine-root contribution, the total N requirement of the P. densiflora trees was 98.6kgNha^–1year^–1, and the total N uptake was 64.2kgNha^–1year^–1. Thus, the N uptake of the P. densiflora trees was 64.1% of the N requirement, indicating that P. densiflora trees growing on an infertile lava surface obtain some of their N from below-ground organic material layers every year and the contribution of N storage in trees for their growth is not any higher than indicated in previous reports that excluded fine-roots contribution. The wet N deposition of our research forest was only 5.8% of the N requirement of the P. densiflora trees and only 8.9% of the N uptake. Movement of the below-ground organic material layer N concentrations in the F- and L-layers coincides with needle development and fine-root growth, suggesting the possibility that P. densiflora trees extract N from the organic N of those layers for growth.     

Characteristic Raman bands for <Emphasis Type="Italic">Artocarpus heterophyllus</Emphasis> heartwood

The Raman spectrum of Artocarpus heterophyllus heartwood, which proved to be a rich source of flavonoids, exhibited two characteristic bands, at 1247cm^–1 and 745cm^–1. The bands also appeared in the Raman spectrum of the yellow-brown needles extracted from the heartwood with methanol. Based on the Raman measurements of flavones and related compounds, it was predicted that the Raman band at 1247cm^–1 may be attributed to flavonoid-type compounds. No vibrational band corresponding to the characteristic Raman bands was observed by diffuse reflectance infrared spectroscopy. Thus, it was suggested that observation of the characteristic bands is an advantage of Fourier transform-Raman spectroscopy for nondestructive analysis of wood.     

Examination of polychlorinated dibenzo-<Emphasis Type="Italic">p</Emphasis>-dioxins and polychlorinated dibenzofurans in process water of kraft pulp bleaching mill using chlorine dioxide from the aspect of environmental water quality

Process water of a pulp mill with extended kraft cooking, two-stage oxygen delignification, and chlorine dioxide bleaching was examined from the aspect of a new standard for environmental water quality in Japan. According to the new standard, the concentration of dioxins – polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, coplanar polychlorinated biphenyls – in environmental water is restricted to less than 1pg TEQ/l. We clarified that the concentrations of the dioxins in sewers in the chlorine dioxide stage and the alkali stage were less than 1pg TEQ/l and that the 2,3,7,8-tetrachlorodibenzofuran concentrations were 0.5pg/l or less. In addition, a main source of 1,3,6,8- and 1,3,7,9-tetrachlorodibenzo-p-dioxins in the process water seemed to be an agrochemical in water supplied from a river.     

Early effects of four fast-growing tree species and their planting density on ground vegetation in Imperata grasslands

Ground vegetation development was studied under young plantations of Acacia mangium, A. crassicarpa, Gmelina arborea and Paraserianthes falcataria on an Imperata grassland site in South Kalimantan, Indonesia. The study was based on two separate trials: 1) a species trial with a spacing of 3×3 m, and 2) a spacing trial with progressively decreasing planting density. Both trials were established by use of intensive site preparation, NPK-fertilization, and weeding during the first year. Two years after planting and one year after the last weeding, ground vegetation in the first trial was dominated by Imperata cylindrica grass and shrubs Chromolaena odorata and Clibadium surinamense. In the open area (control) only Imperata grass appeared. Significant differences in total ground vegetation biomass (t ha^–1) between the tree species were as follows: G. arborea (0.2) A. mangium (1.4) A. crassicarpa (4.2) < P. falcataria(9.6) open area (11.4). The early results from the spacing trial showed similar trends in the hardwood species' abilities in Imperata suppression. Highly significant linear relationships existed in regression analysis between the distance between planted trees and the ground vegetation biomass as follows: G. arborea (r²=0.75), A. mangium (r²=0.95), A. crassicarpa (r²=0.97), P. falcataria (r²=0.96). Tree species and their planting density should thus be critically considered in forest plantation establishment on Imperata grasslands, since ground vegetation development plays a decisive role in fire susceptibility, maintenance requirements and the promotion of native species in plantations.     

The composition and abundance of microarthropod communities on arboreal litter in the canopy of Cryptomeria japonica trees

In a Cryptomeria japonica plantation, we examined the composition and seasonal abundance of microarthropods in communities associated with habitat substrates in the canopy (defined as dead leaves, dead branches, and living leaves) and compared them with those in soil communities. Habitat substrates and microarthropods were periodically collected by the branch-clipping and washing method from the canopy and by the Tullgren method from the soil. Oribatida, Collembola, and larvae of the Chironomidae, most of which are detritivorous or fungivorous, were dominant in the canopy. The dominant oribatid and collembolan families differed markedly between the canopy and the soil. Numbers of all microarthropods per unit dry weight of leaf or per unit area of branch ranged from 4.2 to 11.7g^–1 dry wt on dead leaves, 0.13–0.48cm^–2 on dead branches, and 1.3–6.4g^–1 dry wt on living leaves. In the soil, the number of individuals per unit ground area ranged from 24000 to 220000m^–2. The total abundances of microarthropods on dead leaves and dead branches were almost constant throughout the year. These results suggest that the arboreal litter characteristic of C. japonica canopies is utilized consistently by large numbers of detritivorous and fungivorous microarthropods, and that the decomposition of dead foliage and branches is initiated in the canopy.     

Effect of thawing regime on growth and mortality of frozen-stored Norway spruce container seedlings planted in cold and warm soil

One-year-old frozen-stored Norway spruce (Picea abies (L.) Karst.) container seedlings were planted in a controlled environment providing an air temperature of 22°C and soil temperature of 9±1 or 18±1°C. At planting the root plugs were either frozen or had been thawing for 4 days at 9°C. During a 5-week growing period, in both cold and warm soil the root growth and height growth were less in frozen-planted seedlings than in thawed seedlings. In addition, frozen-planting delayed bud burst and increased mortality. Soil temperature, however, had no effect on bud burst or mortality. Low soil temperature retarded root growth of seedlings thawed before planting but resulted in both retarded root growth and height growth if root plugs were frozen when planted. These results indicate that planting Norway spruce seedlings with frozen root plugs constitutes a considerable risk for successful forest regeneration at soil temperatures normally prevailing in Fennoscandia in spring or early summer especially if the soil is dry at the time of the planting.     

Crystallinity of wood and the size of cellulose crystallites in Norway spruce (<Emphasis Type="Italic">Picea abies</Emphasis>)

X-ray diffraction was used to study variations in the crystallinity of wood and the average thickness and length of the crystallites of cellulose as a function of the number of the year ring in Norway spruce [Picea abies (L.) Karst.]. The crystallinity increased from ring 4 to ring 10 from the pith and was constant after ring 10. The crystallinity of mature wood was about 30% ± 5%. The average thickness and average length of the crystallites were 3.2 ± 0.1nm and 28 ± 2nm, respectively; and no systematic variation of these values with the number of the year ring was observed. The mean microfibril angle decreased near the pith but was constant in the mature wood.