Cadmium uptake in Norway spruce (Picea abies (L.) Karst.) seedlings

Root elongation of Norway spruce (Picea abies (L.) Karst.) seedlings was inhibited in the presence of 5 microM Cd, but was unaffected by a Cd concentration at 0.05 microM. Nutrient solutions labeled with (109)Cd were used to investigate the influence of pH, cations and the metabolic inhibitor 2,4-dinitrophenol (DNP) on the uptake of Cd by roots of intact spruce seedlings. Extracellular Cd was removed by washing the roots, and the relative amounts of Cd in the root apoplast and symplast estimated. In the presence of DNP, Cd uptake was reduced at 0.05 microM (non-toxic) but not at 5 microM Cd (toxic). At 0.05 microM Cd, the uptake of Cd into both the apoplast and symplast was dependent on the pH of the nutrient solution. Lower pH decreased Cd accumulation. Aluminum supplied at 100 or 500 microM lowered the Cd concentrations of both the apoplast and symplast. An increase in Ca or Mg supply reduced the Cd concentration of the apoplast but not of the symplast. In the presence of 5 microM Mn, the concentration of Cd in the symplast decreased by 44% compared to the control (1 microM Mn). High concentrations of Zn or Hg did not affect the Cd concentration of the roots.     

Crown architecture and stemwood production in Norway spruce (Picea abies (L.) Karst.)

The morphological data for Norway spruce (Picea abies (L.) Karst.) trees published by Burger (1953) were reanalyzed to examine the relationships between crown shape, needle and branch mass density of crown volume, needle efficiency in stemwood production, harvest index and stemwood production efficiency per unit of crown projected area. Production of stemwood per unit of crown projected area was higher in narrow-crowned trees than in broad-crowned trees because the narrow-crowned trees had (i) smaller horizontal space requirements for equal crown volumes, (ii) higher leaf area index due to both the geometrical crown shape and higher needle density per unit of crown volume, and (iii) higher harvest index indicating high allocation of dry matter production to stem.     

Influence of a high Mn supply on Norway spruce (Picea abies (L.) Karst.) seedlings in relation to the nitrogen source

Effects of 3, 25, 100, 200 and 800 microM Mn on biomass and pigment, starch and nitrate concentrations were studied in Norway spruce (Picea abies (L.) Karst.) seedlings grown with either NO(3) (-) or NH(4) (+) as the sole nitrogen source. After 77 days of exposure to 800 microM Mn, shoot growth had ceased in about 50% of the seedlings independently of the N source. Despite high Mn concentrations in roots and shoots of the Mn-treated seedlings, no visible symptoms of Mn toxicity were evident. The rate of root elongation was decreased by treatment with >/= 200 microM Mn when N was supplied as NO(3) (-), but not when it was supplied as NH(4) (+). This difference could be attributed to the higher Mn concentrations in root tips of the NO(3) (-)-grown seedlings compared with the NH(4) (+)-grown seedlings. In Mn-treated seedlings, the concentration of Mg, and to a lesser extent that of Ca, decreased. Depletion of these elements might account for the observed growth depression. Potassium concentrations were similar in the control and Mn-treated seedlings. Treatment of seedlings with 800 microM Mn for 50 days led to several physiological changes: starch accumulated, the concentrations of nitrate and phenolic compounds increased, pigment concentrations decreased, and in vivo nitrate reductase activity in roots was reduced.     

Fine-root distribution and morphology in an acidic Norway spruce (Picea abies (L.) Karst.) stand in SW Sweden in relation to granulated wood ash application

Wood ash is recommended as a compensatory fertiliser to counteract the effects of acidic deposition on forest ecosystems. Spatial distribution of biomass, necromass and morphology parameters of the fine roots (diameter classes <1, 1–2, <2 mm) of Norway spruce (Picea abies (L.) Karst.) were analysed in response to fertilisation with granulated wood ash (GWA) in a long-term field experiment in SW Sweden. GWA was applied as a single dose of 3200 kg ha⁻¹ and the fine roots were sampled 9 years later by soil coring. Soil cores were divided into 1-cm strata within the top 0–2.5 cm humus limits, the lower humus below 2.5 cm (with varying thickness) and the mineral soil to 50 cm depth (from ground surface). Total fine-root biomass in the control (C) and GWA treatment, 256 ± 20 and 258 ± 25 g m⁻², respectively, and length 2072 ± 182 and 1800 ± 198 m m⁻², respectively, did not differ statistically from each other. Total fine-root necromass in the 1–2 mm fraction was significantly higher in C than in the GWA treatment, 130 ± 12 and 80 ± 10 g m⁻², respectively. Fine-root biomass in the <1 mm fraction was significantly greater in the lower humus in the GWA treatment, but this did not affect the total biomass in the <1 mm fraction in the whole soil profile. The biomass-to-necromass ratio (1–2 mm) was significantly higher in the GWA treatment in the 0–30 cm soil layer than in the corresponding layer of the control. Specific root length (SRL) was lower in the GWA treatment than in the control in the 0–5 cm soil layer. The lower necromass and SRL were more clearly related to the GWA treatment, whereas the difference in the vertical distribution of biomass may have been related to the thicker humus layer in the GWA plots.     

A model describing natural regeneration recruitment of Norway spruce (Picea abies (L.) Karst.) in Austria

In the absence of reliable and representative data on the frequency of seed years, seed amounts, germination and survival of seeds, the data of the observation period 1992–1996 of the permanent national forest inventory of Austria are used to develop a model describing the probability for the occurrence, density and height of Norway spruce (Picea abies (L.) Karst) natural regeneration in the forests of Austria. The forest inventory provided data on natural regeneration (saplings between 10 and 130 cm height) on clusters within a 3.89 km square sampling grid. A logistic equation is used to predict the probability for natural regeneration occurrence. Input parameters for this equation are the variables that describe the site, with slope and azimuth as continuous variables, and growth districts and vegetation types as discrete variables; the crown competition factor describes density and the quadratic mean diameter describes the stage of development of the stand. The same equation type is used to predict the probability for the occurrence of Norway spruce, conditional on the occurrence of some regeneration. An additional variable in this species specific model is a dummy variable which is set to 1 if Norway spruce occurs in the overstory and otherwise zero. Additional site variables entering this model are elevation and vegetation types characterizing soil fertility and moisture. Because the density and height of spruce regeneration depends on the stand's susceptibility to browsing, the probability for browsing is also modelled as a logistic equation depending on elevation, vegetation type, and stand density. Finally the probability distribution for height and density of the regeneration is described by two bivariate Weibull-distributions, each one describing browsed and unbrowsed Norway spruce regeneration respectively.     

Microclimate and moisture content profile measurements in rain exposed Norway spruce (Picea abies (L.) Karst.) joints

In order to perform service life predictions of rain exposed wood structures, the moisture and temperature conditions in the structure need to be known as well as which degradation that occurs under those exposure conditions. The microclimate (the moisture conditions at the surface) is the boundary condition for moisture transport into the wood and depends on the detail design; joints between two pieces of wood can act as a water trap which give long durations of surface moisture after rain events and hinders drying. This study presents moisture content and microclimate measurements in three types of Norway spruce joints exposed to artificial rain in the laboratory. Both the microclimate (the duration of water on surfaces and in gaps) and the moisture content profiles were monitored. The microclimate was changed by changing the size of the gap between the two boards. The duration of water in the gap depended both on the gap size and on the permeability of the wood (sapwood/heartwood, end grain surface/side grain surface). In many cases, a larger gap width gave shorter durations of high moisture contents since a larger gap gave more favourable drying conditions, but the magnitude of this reduction varied between joint types.     

Climate-sensitive modelling of site-productivity relationships for Norway spruce (Picea abies (L.) Karst.) and common beech (Fagus sylvatica L.)

The aim of the presented research project is to fit a site index model capable for predicting changes in site-productivity in a changing climate. A generalized additive model is used to predict site index as a function of soil and climate variables. The climate parameter values are estimated using the regional climate model WETTREG, based on global climate simulations with the global circulation model ECHAM5/MPI-OM for the reference period from 1961 to 1990. The climate values are further regionalized on a 200 m × 200 m grid. The generalized additive model quantifies the partial linear and non-linear effects of the predictor variables on site index. The model is parameterized for Norway spruce (Picea abies (L.) Karst.) and common beech (Fagus sylvatica L.) in Lower Saxony, Germany. Two case studies investigate the model's ability to generate information in order to support forest management planning decisions under a changing climate. One example analyzes the possible shift in site index of spruce along a precipitation gradient under the International Panel on Climate Change (IPCC) emission scenario A1B in the period from 2041 to 2050. The other case study shows possible future changes in site index of beech along a temperature gradient.     

Live storage and drying of storm-felled Norway spruce (Picea abies,L. Karst.) and Scots pine (Pinus sylvestris L.) trees

Storm-felled trees left in the forest for a shorter or longer period, affect the quality of the logs. The change in quality is mainly because of attack of fungi and insects, which in turn depends on the moisture content (MC) of the sapwood. The purpose of this study was to receive more knowledge about drying of storm-felled trees by investigating how fast winter storm-felled Norway spruce and Scots pine dried when left in the forest. Sixteen storm-felled spruces with part of the roots still in ground contact were selected from three stands and in addition to 10 pines from one of the stands. The trees were examined for MC in the sapwood until 21 months after the storm. This study indicates that wind-thrown trees with roots still connected to the soil can survive one summer without any value loss caused by draught, fungi and insects. The stand conditions can be of importance as the storm-felled trees in the stand, with scattered windthrow, were in best condition after one year, as they were shadowed by the trees still standing. Comparing spruces and pines with the stand with scattered windthrow, pines were more sensitive to drought and reached critical MC earlier.     

Moisture sorption and swelling of Norway spruce [Picea abies (L.) Karst.] impregnated with linseed oil

Abstract

The moisture sorption and swelling of spruce specimens impregnated with linseed oil and unimpregnated controls were studied in two sorption experiments: from 0 to 55% relative humidity (RH) and from 55% RH to water saturation. Sorption isotherms were also determined using a sorption balance. The impregnated specimens had lower rates of both moisture sorption and swelling than the unimpregnated controls; however, there was no significant difference in final moisture contents. In addition, the linseed oil impregnation did not improve the dimensional stability of the wood; in most cases the specimens impregnated with linseed oil swelled more than the unimpregnated controls. For the impregnated specimens, reductions in swelling rates were in most cases seen without corresponding reductions in final swelling. The moisture sorption rate was reduced for the impregnated specimens but there were generally no reductions in equilibrium moisture content.     

Influence of a long-term storage in anaerobic conditions on Norway spruce (Picea abies,L. Karst.) physical and mechanical wood properties

Timber storage is a key aspect of storm damage management. After huge storms, sprinkling storage is usually the most used conservation process but anaerobic storage in sealed silos appears as good alternative to preserve wood quality over long periods. This paper investigates the impact of long-term (57 months) storage of Norway spruce logs in anaerobic atmosphere on wood properties. Tests were performed on clear wood specimens and on lumbers to determine the modulus of elasticity (E), the static bending strength (σ_f) and the dynamic bending strength (K). Storage effects on impregnability and colour variation were also studied. Results show no effect of storage on E, σ_f and K. The naturally poor impregnability of Norway spruce is not improved by the anaerobic conditions, compared to traditional wet storage. Triangle tests reveal no discernible colour variation between logs that underwent anaerobic storage and the control sample. As a conclusion, despite a mould (Gliocladium solani) frequently observed on logs surface after the storage, the process offers ideal conservation conditions. While overall cost remains the main drawback for using anaerobic storage at large scale, the process can be recommended for high value logs, especially since it has few environmental impacts.     

Recovery of photosynthesis in 1-year-old needles of unfertilized and fertilized Norway spruce (Picea abies (L.) Karst.) during spring

Photosynthetic O(2) evolution and chlorophyll a fluorescence were measured in 1-year-old needles of unfertilized and fertilized trees of Norway spruce (Picea abies (L.) Karst.) during recovery of photosynthesis from winter inhibition in northern Sweden. Measurements were made under laboratory conditions at 20 degrees C. In general, the CO(2)-saturated rate of O(2) evolution was higher in needles of fertilized trees than in needles of unfertilized trees over a wide range of incident photon flux densities. Furthermore, the maximum photochemical efficiency of photosystem (PS) II, as indicated by the ratio of variable to maximum fluorescence (F(V)/F(M)) was higher in needles of fertilized trees than in needles of unfertilized trees. The largest differences in F(V)/F(M) between the two treatments occurred before the main recovery of photosynthesis from winter inhibition in late May. The rate of O(2) evolution was higher in needles of north-facing branches than in needles of south-facing branches in the middle of May. Simultaneous measurements of O(2) exchange and chlorophyll fluorescence indicated that differences in the rate of O(2) evolution between the two treatments were paralleled by differences in the rate of PS II electron transport determined by chlorophyll fluorescence. We suggest that, during recovery of photosynthesis from winter inhibition, the balance between carbon assimilation and PS II electron transport was maintained largely by adjustments in the nonphotochemical dissipation of excitation energy within PS II.     

Outdoor exposure of untreated Scots pine (Pinus sylvestris L.) and Norway spruce [Picea abies (L.) Karst.] wood samples

Abstract

Untreated Scots pine (Pinus sylvestris) and Norway spruce (Picea abies) samples were exposed above ground in a durability test for 6 years. The samples consisted of three pieces of wood, 22×95×500 mm, screwed together; two pieces lengthwise with a third piece overlapping. Weight was measured, to calculate moisture content (MC), and samples checked regularly for cracks and fungal growth. Parameters investigated were heartwood/sapwood (pine), annual ring orientation (spruce), stand site, annual ring width and density. Stand site, annual ring width and density had no influence on MC or fungal growth for either pine or spruce. Spruce samples with vertical annual rings had fewer cracks than samples with horizontal annual rings. Pine sapwood samples had a high MC and a large amount of rot fungi, while heartwood had a lower MC and no rot. Most spruce samples were similar to pine heartwood, except from a few samples that had high MC and fungal growth. Those were all sawn from the outer part of the log. Therefore, it can be stated that spruce sawn from the inner part has almost the same properties as pine heartwood, while spruce from the outer part of the log has similar properties to pine sapwood.     

End grain water absorption and redistribution in slow-grown and fast-grown Norway spruce (Picea abies (L.) Karst.) heartwood and sapwood

Abstract

Wood is susceptible to decay by rot fungi if it is exposed to high-moisture contents during long periods of time and it is therefore important to limit the duration of such periods. Critical points in outdoor wood structures are, for example, end grain surfaces in joints where water can get trapped after a rain. It is therefore of interest to study both absorption and redistribution of moisture in wood. This paper presents moisture content profiles during end grain water absorption and redistribution in Norway spruce (Picea abies (L.) Karst.) measured by computed tomography with the specimens in individual climate boxes. Heartwood and sapwood of two provenances (slow-grown and fast-grown wood) were included. No major differences were seen between the water uptake of the slow-grown and the fast-grown wood since the densities were similar despite of the large difference in growth ring width. However, for the sapwood specimens, the moisture content was higher further into the specimens than for the heartwood specimens in agreement with previous studies. For the slow-grown wood, the redistribution was also generally more rapid for the sapwood specimens than for the heartwood specimens.     

Microfibril angle of Norway spruce [Picea abies (L.) Karst.] compression wood: comparison of measuring techniques

The structure of cellulose, especially the microfibril angles (MFAs), in compression wood of Norway spruce [Picea abies (L.) Karst.] was studied by wide- and small-angle X-ray scattering and polarizing microscopy. On the basis of the X-ray scattering experiments the average MF As of the cell wall layers S₂ and S₁ of the studied sample are 39 and 89, respectively; and the average diameter and length of the cellulose crystallites are 2.9 and 20.0nm, respectively. The average of the whole MFA distribution is shown to agree with the one obtained by polarizing microscopy of macerated fibers.     

Influence of nutrient supply on spring frost hardiness and time of bud break in Norway spruce (Picea abies (L.) Karst.) seedlings

When spring frosts occur on recently planted forest sites, severe damage may occur to the seedlings. The aim of the present study was to test how different low levels of nutrient concentrations in Norway spruce (Picea abies (L.) Karst.) seedlings affected spring frost hardiness and time of bud break. Seedlings were grown in a greenhouse for one season and supplied with fertiliser containing 22, 43 and 72 mg N l^–1, respectively. The treatments resulted in needle nitrogen concentrations ranging from 0.9 to 1.8% in autumn. After winter storage at 0 °C, bud break was recorded on seedlings growing in the greenhouse, outdoors and in growth chambers at 12 °C and at 17 °C. Freezing tests were performed on seedlings directly removed from winter storage and following one week growth in the greenhouse. Seedlings receiving fertiliser with 43 mg N l^–1 had less freezing injury than the two other fertilisation treatments in the present study. The earliest bud break occurred in seedlings receiving 72 mg N l^–1.     

Radial growth variation of Norway spruce (Picea abies (L.) Karst.) across latitudinal and altitudinal gradients in central and northern Europe

Regional and temporal growth variation of Norway spruce (Picea abies (L.) Karst.) and its dependence on air temperature and precipitation were compared in stands across latitudinal and altitudinal transects in southwestern and eastern Germany, Norway, and Finland. The temporal variation of radial growth was divided into two components: medium- and high-frequency variation, i.e. decadal and year-to-year variation, respectively. The medium-frequency component was rather different between regions, especially the southern and northern ones. However, within each region the medium-frequency growth variation was relatively similar, irrespective of altitudinal and latitudinal differences of the sample sites. A part of the high-frequency variation was common to all four regions, which suggests that some factors synchronising tree growth are common for the entire study area. The high-frequency component of growth was more strongly related to monthly air temperature and precipitation than was the medium-frequency variation. The limiting effect of low temperatures was more significant at northern as well as high-altitude sites, while the importance of precipitation increased in the south and at low altitudes.     

Impregnation of Norway spruce (Picea abies L. Karst.) wood by hydrophobic oil and dispersion patterns in different tissues

Wood from Norway spruce (Picea abies L. Karst.) is biologicallydegraded in exposed conditions. It also has anatomical featuresthat make it difficult to impregnate with preservatives by currentlyavailable industrial processes. In the study reported here,we used the new Linotech process to impregnate Norway sprucewood with hydrophobic linseed oil and then quantified its uptakeand dispersal in anatomically distinct wood tissues. We alsoinvestigated the effects of the wood moisture content on theresults of the impregnation. Samples (500 x 25 x 25 mm) weretaken from 15 trees in a coniferous forest in northern Sweden(64° 10' N, 160–320 m a.s.l.). The parameters forthe Linotech process were 2–3 h treatment time at 0.8–1.4MPa and 60–140°C. To determine the level of uptake,the linseed oil was extracted from the impregnated wood usingmethyl-tertiary-butyl-ether. The uptake was quantitatively analysedby comparing X-ray microdensitometry values obtained followingimpregnation both before and after oil removal. In earlywood,initial moisture content had an obvious effect on the impregnationresult. Six times more oil was taken up when the moisture contentwas greater than ~150 per cent than when it was less than 30per cent. Theoretical calculations, based on density levels,suggest that the water-filled porosity of the wood (water volumedivided by porosity volume) was positively correlated with thelinseed oil uptake, and more strongly correlated in earlywoodthan in latewood. There were also significant differences inuptake between different wood tissues; heartwood/mature woodand heartwood/juvenile wood showed 10–20 per cent weightincreases due to linseed oil uptake, compared with 30–50per cent in sapwood/mature wood. Examination by scanning electronmicroscopy confirmed these uptake patterns. The moisture contentafter impregnation was about 5 per cent, irrespective of theLinotech process parameters, tissue type and initial moisturecontent. In conclusion, the impregnation process used here resultsin high levels of well-dispersed linseed oil uptake and shouldfacilitate drying.