| 刨花板用大豆蛋白基胶黏剂的研究 |
| |
| 引用本文： | 吴志刚,雷洪,杜官本,王辉,席雪冬,曹明,沈高丽,熊文. 刨花板用大豆蛋白基胶黏剂的研究[J]. 浙江农林大学学报, 2016, 33(1): 172-176. DOI: 10.11833/j.issn.2095-0756.2016.01.023 |
| |
| 作者姓名： | 吴志刚 雷洪 杜官本 王辉 席雪冬 曹明 沈高丽 熊文 |
| |
| 作者单位： | 1.西南林业大学 云南省木材胶黏剂及胶合制品重点实验室，云南 昆明 650224;2.北京林业大学 材料科学与技术学院，北京 100083 |
| |
| 基金项目： | 云南省应用基础研究重点项目（2013FA038）;云南省中青年学术带头人后备人才项目（2011HB024）;国家林业公益性行业科研专项（201304505）;十二五国家科技支撑计划项目（2012BAD24B03） |
| |
| 摘 要： | 为了提高刨花板用大豆Glycine max蛋白基胶黏剂的内结合强度和耐水性，在碱、尿素共同作用的大豆蛋白与酚醛树脂共聚（SPF）反应的基础之上，研究了在共聚之前经过交联的SPF与未经过交联的SPF对刨花板力学性能和吸水厚度膨胀率的影响。结果表明:①共聚之前经过交联的SPF胶黏剂刨花板24 h吸水厚度膨胀率满足国家标准GB/T 4897.3－2003中潮湿环境下的结构用板要求（10.0%）。其中，酚醛预聚液作为交联剂，刨花板内结合强度值满足标准中干燥状态下使用的家具及室内装修用板要求（0.40 MPa）。②傅里叶变换红外光谱（FT-IR）分析表明，交联剂主要与豆胶的伯胺反应，通过加成反应接到大豆蛋白分子链上。③差示扫描量热法（DSC）分析表明，交联剂与豆胶有比较明显的交联固化峰，交联反应比较理想。图2表1参9
|
| 关 键 词： | 木材科学与技术 刨花板 豆胶 交联剂 |
| 收稿时间： | 2015-03-05 |
Particle board with soy protein-based adhesives |
| |
| WU Zhigang,LEI Hong,DU Guanben,WANG Hui,XI Xuedong,CAO Ming,SHEN Gaoli,XIONG Wen. Particle board with soy protein-based adhesives[J]. Journal of Zhejiang A&F University, 2016, 33(1): 172-176. DOI: 10.11833/j.issn.2095-0756.2016.01.023 |
| |
| Authors: | WU Zhigang LEI Hong DU Guanben WANG Hui XI Xuedong CAO Ming SHEN Gaoli XIONG Wen |
| |
| Affiliation: | 1.Wood Adhesives and Glued Products Key Laboratory of Yunnan Province, Southwest Forestry University, Kunming 650224, Yunnan, China;2.College of Materials Science and Technology, Beijing Forestry University, Beijing 100083, China |
| |
| Abstract: | To improve the internal bonding strength and water resistance of particle board using a soy protein-based adhesive, soy protein was treated with alkali and urea; then phenol formaldehyde resin was added to produce a soy protein-based adhesive （SPF）. The SPF adhesive was added to the particle board with and without a cross-linker and followed by copolymerization to study its mechanical properties and thickness swelling rate of water absorption. Analysis included Fourier Transform Infrared （FT-IR） spectroscopy and Differential Scanning Calorimetry （DSC）. Results indicated that adding the SPF adhesive with the cross-linker before copolymerization had better water resistance, which met the GB/T 9846.3－2004 standard for particle board structures in a humid environment （10.0%）. With preshrinking phenol formaldehyde as a cross-linker, the internal bonding strength of the particle board met the standards used in furniture and interior decoration requirements （0.40 MPa）. The FT-IR and DSC results showed that the cross-linker agent mainly reacted with primary amine. DSC results also showed a strong reaction between the cross-linker and the protein. It inferred that adding cross-linker before the copolymerization was very important, which could improve the internal cohesion of soy protein-based adhesive.［Ch, 2 fig. 1 tab. 9 ref.］ |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《浙江农林大学学报》浏览原始摘要信息 |
|
点击此处可从《浙江农林大学学报》下载免费的PDF全文 |
|
