Production of Nile tilapia Oreochromis niloticus grown in BFT using two aeration systems

Aeration systems used in BFT farming need to meet the dissolved oxygen demand from the biota present in the tank, as well as to keep the particulate matter in suspension. In BFT systems, it is common to use blowers, but the choice of an aerator with better efficiency in oxygen transfer and in electric energy consumption is indispensable. The vertical pump model (VPM) aerator is the most used in intensive tilapia production systems in southern Brazil. The objective of this research was to verify if this aerator model can support Nile tilapia farming under BFT system without producing negative impacts on the functionality neither of the biofloc nor in the production indexes. Simultaneous farming on BFT using blowers served as control. Oreochromis niloticus juveniles with an initial density of 7 kg/m³ were used. After 56 days of farming, the VPM aerator obtained significantly better results, both in water quality parameters and in production indexes, when compared to those obtained in the control treatment. The temperature was higher in the treatment of the blowers due to the lower thermal exchange between the atmospheric air and the tank water. Although the VPM caused lower temperatures, it obtained a productivity of 21.2 kg/m³, compared to 20.2 kg/m³ of the blowers. It was concluded that the use of the VPM aerator had no negative influence on both the formation and functionality of the biofloc, obtaining even higher production rates.