首页 | 本学科首页   官方微博 | 高级检索  
     检索      

锌,铜对锡铅钎料性能影响的研究
引用本文:邱小明,王红颖.锌,铜对锡铅钎料性能影响的研究[J].农业机械学报,1995,26(3):114-118.
作者姓名:邱小明  王红颖
作者单位:吉林工业大学焊接教研室,吉林工业大学微观分析中心,吉林工业大学焊接教研室90级,山东省潍坊市潍坊水箱厂
摘    要:研究了Zn、Cu对含锡15%和30%的锡铅钎料系统工艺性,机械性能的影响,研究结果表明,Zn、Cu对锡铅钎料的工艺性能和机械性能有不良影响,少量Zn,Cu明显降低锡铅钎料润湿性和钎焊搭接接头强度,黄铜在30SnPb钎料中的溶解速度明显高于15SnPb钎料。

关 键 词:锡铅钎料  润湿性  溶解    

THE INFLUENCE OF Zn, Cu ON THE PROPERTIES OF Sn-Pb SOLDERS
Qiu Xiaoming Wang Hongying Li Shiquan Wan Chuangeng Shen Guoxiang Zhu Yongming.THE INFLUENCE OF Zn, Cu ON THE PROPERTIES OF Sn-Pb SOLDERS[J].Transactions of the Chinese Society of Agricultural Machinery,1995,26(3):114-118.
Authors:Qiu Xiaoming Wang Hongying Li Shiquan Wan Chuangeng Shen Guoxiang Zhu Yongming
Institution:Qiu Xiaoming Wang Hongying Li Shiquan Wan Chuangeng Shen Guoxiang Zhu Yongming (Jilin University of Technolog)Zhao Xuri(Weifang Radiator Factory)
Abstract:In this paper, the influence of Zn, Cu on the procedure and mechanical properties of Sn-Pb solders containing 15% and 30% Sn was investigated. It has been proved that the proce-dure and mechanical properties ofSn-Pb solders can be deteriorated seriously by adding Zn,Cu, the wettability and jointstrength can be reduced obviously. The dissolved speed of brass in the 30SnPb solder is faster than that of the 15SnPb.
Keywords:Sn-Pb solders  Wettability  Dissolving  
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号